Software Update Error Code

A networking error has occurred: timed out (-1001). Make sure you can connect to the Internet, then try again.
Software Update can't check for updates because of a network problem.
I need help trying to figure out this error

I have the same error message ('Network error -1001'). We have successfully had a network server software update running for 6 macs for years, but since we had to switch our IP address to the alternative ADSL2 line (Network settings), the network server software update stopped working.
I've researched Server Admin and logged into server to check settings and everything is as it should be.
It is not clear how you 'point' a mac to get it's software update from a network server.
On the server and other desktops in the office I can connect to the internet no problem, but software update fails with the same 'network error -1001 can't connect to the internet, check settings'. But we can and do have internet connection!
Suggestions welcomed.

Similar Messages

  • C2 03 Software update error code 12052

    Hello,
    while updating my C2 03 device software with Ovi suite, my device automatically got switch off and getting error that my device is disconnected, try connecting by removing battery and USB cable and reinsert both and press power button for  one second, but doing these stuff for 2 or 3, things not worked and in last I'm getting error code of 12052.
    Please help how this will fix.

    Here is the correct version of the same mail.
    Software update was also givinf me Error.  Then it informed me to un install your OVI suite and re install.  even after that some other error code persists.
    The crux of the problem is that if your USB port is not directly connected to your CPU, the software update is not possible.
    In most of the laptops the USB port is connected through a USB HUB.  This prevents the softwareupdate.  Remedy ... try updating at a different hardware OR go to NOKIA CARE.
    Bye
    sd55

  • HT4623 iPhone 5, updating using iTunes, iphone could not be updated, error code 3014, iphone is in recovery mode, I have re-installed iTunes twice and each time got the same message

    iPhone 5, updating using iTunes, iphone could not be updated, error code 3014, iphone is in recovery mode, I have re-installed iTunes twice and each time got the same message

    Error 3014
    This error occurs when iTunes can't reach gs.apple.com in a timely fashion. Follow the steps below to contact the iOS software update server gs.apple.com.

  • TS3694 software update error (1015) what is this?

    software update error (1015) what is this?

    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743
    ERROR 1015...
    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ??

    I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!

    I am experiencing the exact same issue during the installtion process for iTunes 10.5.
    I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
    I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
    I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP!

  • Windows update error code 8e5e0147 help!

    I get the error code 8e5e0147 from windows update while trying to do 8 different updates. ive tried doing different things to fix this that I find online but nothing has help, can someone please help fix this?

    Please review this previous post:
    Cannot install some Windows updates, error code 8e5e0147
    Carey Frisch

  • Windows update error Code 80072EF3

    Greetings!
    I have a Dell PowerEdge T320 that is experiencing this issue: Windows update error Code 80072EF3
    I followed instructions in article
    http://support.microsoft.com/kb/947821/en-usand ran the DISM.exe with the offline source (my DVD drive) to avoid using the windows update component that appears to be damaged. Command completed, but no effect on the error.
    Last successful update session was 7/8/2014
    Security Update for Windows Server 2012 (KB2922229) cancelled. Tried to install manually. Not applicable.
    Update for Windows Server 2012 (KB2811660) Failed.  When running the manual download get the message it is already installed. Same for KB2855336
    Any help appreciated.
    Below is the detailed update history.
    This link contains the log for the DISM repair tool:
    https://www.dropbox.com/s/3aufjud0wd0n53n/CBS.zip

    Hi,
    Please re-run Windows update and then provide us the windowsupdate.log file for check. It is under C:\Windows.
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Error when downloading itunes 10.5 that says Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package ven

    Each time I attempt to download the new itunes 10.5 I keep getting the following error message:
    Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SoftwareUpdate_UnregServer, location: C:\Program Files\Apple Software Update\SoftwareUpdate.exe, command: /UnregServer
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Any Ideas of how to solve this one?

    After reading all these posts, one by one did not resolve my problem until I got the very end.  Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
    1. Stand alone upgrade to the latest Quicktime version
    2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
    iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
    Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
    Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
    Great work everyone who contributed!  Thank you very much!

  • Windows Vista Home Premium (SP2) - Update Error Code 80071AA7: Unable to install KB3033889

    I am having problems updating my Windows Vista Home Premium (SP2) with KB3033889
    I am always getting the Update error Code 80071AA7
    I have tried a clean boot, to install Microsoft Update Standalone Package (KB3033889), but does not worked.
    I tried Sfc /scannow, and "Could not repair corrupted file", and i have checked "CBS.log" file:
    POQ 93 ends.
    2015-03-19 02:18:46, Info                  CSI    000001dc [SR] Verify complete
    2015-03-19 02:18:46, Info                  CSI    000001dd [SR] Repairing 1 components
    2015-03-19 02:18:46, Info                  CSI    000001de [SR] Beginning Verify and Repair transaction
    2015-03-19 02:18:46, Info                  CSI    000001df Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini
    do not match actual file [l:24{12}]"settings.ini" :
      Found: {l:32 b:ceS/bmgz5Fkqs00J27mkzYn/b2SuD9mJsx/R1y3hPqA=} Expected: {l:32 b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o=}
    2015-03-19 02:18:46, Info                  CSI    000001e0 [SR] Cannot repair member file [l:24{12}]"settings.ini" of Microsoft-Windows-Sidebar, Version
    = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    After that i have checked "WindowsUpdate.log" file:
    2015-03-18    22:12:23:584    1264    db0    Handler    WARNING: Got extended error: "POQ    Operation    HardLinkFile    OperationData  
     \SystemRoot\WinSxS\x86_microsoft-windows-t..icesframework-msctf_31bf3856ad364e35_6.0.6002.19296_none_774ec727ec2f0da4\msctf.dll, \??\C:\Windows\System32\msctf.dll"
    I am out of ideas.
    Can some one please help me?
    What can i do?
    Thank you.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243)

    Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243) - Please help me!!
    I'm running Windows 7 Home Premium 64-bit on a Lenovo ThinkPad E530. This laptop is only brands new.
    KB954430, KB973688 & KB2538243 - These three updates keep giving me problems. In Windows Update, under "view update history" these keep showing up as failed. I also get the error, "Code 643".
    At the end of the installation it tells me three updates are failed to be installed and when I shut down to try to update, Windows always configures up to ~15%, then fails, and reverts changes, then prompts me to install updates the next time I turn my computer on. Each time, I have to re-install every update that I had installed prior to shutting down.
    I went through Trouble shooter - "Fix it" numerous times, Repaired Net framework profile and also followed few instructions I found from the net such as running "Reset Register Windows update Components" but nothing works so far.
    I even tried manually installing KB954430 but it told me "An error occurred during the installation of assembly component. 7B30B69B-OE6C-B7EO-A06B-D6B9ABF34537  HR RESULT: 0 x 80070BC9" and the installation bar seems to stop at "Publishing Product information", then rolls back the installation.
    If you need more details, please tell me & Thanks in advance

    Checkout this Microsoft article: http://support.microsoft.com/kb/976982 
    It has some resolution steps that may help.
    Thank you for being a part of the Lenovo Family,
    Catie
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Donate KUDOS and Click "Accepted Solution"

  • Creative cloud failed to update error code: 1

    free trial of creative cloud failed to update error code: 1  so I couldn't use the creative cloud. Please help, thanks a lot!!

    Hi jadyyuk,
    Please try the solution mentioned in the KB : http://helpx.adobe.com/creative-cloud/kb/a12e1-error-downloading-creative-cloud.html

  • Getting Error while doing Control Panel - Windows Update Error code is 80070103

    Getting Error while doing Control Panel -> Windows Update Error code is 80070103. The optional Windows 7 update is
    Microsoft - Other hardware - WinUsb Device
    Please provide your email ID to send the Error screen shot.

    Hi!
    Check the following link to see if it solves your problem:
    http://support.microsoft.com/kb/952032
    Best regards
    Andreas Molin
    Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin

  • I cannot download the new update - Error code: 43

    I cannot download the new update - Error code: 43 -- what does that mean?

    Hi Arjun,
    From the cc app the preferences option is greyed-out, so I'm not able to sign out and in... yes I'm aware I'm able to update from the app directly.  The issue I found in the past is when I updated Lightroom from Lightroom itself, the cc app did not see it as being updated... still saw it as the earlier version.  So the app said there was an update and I was trying to go into cc to perform the update instead of the app....
    Would be interested in hearing more about the error 43 from Adobe...
    I'm attaching two screen shots, one of the error and the second of the greyed-out preference option.
    Thanks,
    -Erik

  • TS3694 IPHONE 3G CANNOT RESTORE AND UPDATE ERROR CODE 1015

    IPHONE 3G CANNOT RESTORE AND UPDATE ERROR CODE 1015

    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743
    ERROR 1015...
    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • My Pavillion m7760n has stopped installing windows updates, Error Code 0x80070020. Unable to find a

    my Pavillion m7760n has stopped installing windows updates, Error Code 0x80070020.  Unable to find a fix for it.

    Start with this: http://support.microsoft.com/mats/windows_update/en-us?entrypoint=lightbox
    Then if that does not do it: http://support.microsoft.com/kb/883825/en-us
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

Maybe you are looking for

  • Trying to find the best format for an external hard drive

    I have a new iMac 20", and I am now converting an external hard drive I had on another computer to be compatible with this one. The ext. HD was formatted as NTFS, and I would like to make it much more easily read/write. I've tried using various tools

  • Get the status of recurring schedule

    Which is the field used to identify the status of recurring schedule? I have a recurring schedule and I want to retrieve only the future instances of the schedule and not the completed instances. Using the SDK the value oInfoObject.getSchedulingInfo(

  • Joining two datasets in Crosstabs

    Hi....I have a requirement in crosstabs... I have 3 data sets-. Ds1, ds2, ds3 Month column comes from all the 3 data sets. I have a Category Column which comes from all three datasets-. (category = Mother board,mouse,key board ) Max sales, Avg sales,

  • I have no trash can in my ipad photos. How to delete photos

    I have no trash can in my ipad photos.  How do I delete photos.  I have the new OS 6

  • Adobe website download incorrect for 10.3.184.16 activex installation

    I normally go here http://www.adobe.com/products/flashplayer/distribution3.html to download the MSI version of the adobe flash player (activex) but this time it is labled correcly with 10.3.183.16 but that is not what you get when you download.  You