Software update error - Package Authoring: my.result.title ...

Hi,
I updated three SL servers to 10.6.7 and now install.log in all three systems are filled with an error message "Package Authoring: my.result.title and my.result.message not defined or empty". And when checking for new software updates using Server Admin - Server Updates the following error also written into the install log file: Software Update[]: Can't load distribution from (null): Error Domain=NSURLErrorDomain Code=-1000 UserInfo=0x1001805d0 "bad URL" Underlying Error=(Error Domain=kCFErrorDomainCFNetwork Code=-1000 UserInfo=0x100637640 "bad URL")
Has anybody seen this before?
Searching for ideas to fix this problem.
Best Regards, Heimo

On one of my MacMini Server 10.6.7
I'm also seeing a string of these entries in my machines.
5/17/11 5:59:25 AM Software Update[30234] Package Authoring: my.result.title and my.result.message not defined or empty
Typically I get about 25 of them in a block and then
5/17/11 5:59:28 AM com.apple.launchd[1] (com.apple.suhelperd[30235]) Exited with exit code: 2
All in about 10 seconds.
This happens once a day at about the same time...
This is a not so busy MacMini Server that is providing Software Updates to clients ...
I also appear to see this on the client side of a SnowLeopard Clients....
so perhaps it is not a server error at all... But it does appear to be Software Update related.... In my case, I have an internal, local Software Update Server.

Similar Messages

I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ??

I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!

I am experiencing the exact same issue during the installtion process for iTunes 10.5.
I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP!

Error when downloading itunes 10.5 that says Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package ven

Each time I attempt to download the new itunes 10.5 I keep getting the following error message:
Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SoftwareUpdate_UnregServer, location: C:\Program Files\Apple Software Update\SoftwareUpdate.exe, command: /UnregServer
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any Ideas of how to solve this one?

After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much!

TS3694 software update error (1015) what is this?

software update error (1015) what is this?

Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

Nokia Software Updater -- Error 1402.Could not ope...

H,
When I try to install the Software Updater for the first time to update my Nokia 6500c phone, I receive the following error message about 57% during the install process. I checked my permission keys in the registry, and they seem to have all the correct Admin permission.
Any suggestions?
Product: Nokia Software Updater -- Error 1402.Could not open key: HKEY_LOCAL_MACHINE\Software\Classes\Msxml2.DSOControl.4.0\CLSID. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Thanks.
Matt

Hi,
It looks like you do not have access to the registry key mentioned i.e. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current Version\Run\Optional Components\IMAIL.
This might be due to the fact that you may not be added to the Administrators group or the registry key has been denied access explicitly to a group that you may be part of.
People in my network setup were facing the same issue, and we fixed the same using Microsoft's "subinacl" tool. You can follow the below mentioned steps to rectify your issue as well:
1. Download Microsoft's SubinACL tool from http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe -4a91-93cf-ed6985e3927b&displaylang=en
2. Install the same by double clicking on the "subinacl.msi" just downloaded.
3. Open Command Prompt window through the Run Dialog Box (Start -> Run and type "cmd" and click OK)
4. In the Command Prompt window, type in the following commands:
i. cd /d "%ProgramFiles%\Windows Resource Kits\Tools" (Hit Enter)
ii. subinacl /subkeyreg HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents /grant=administrators=f /grant=SYSTEM=f /grant=USERS=f /grant="Creator Owner"=f (Hit Enter)
You should see some processes happening on your screen. After the process ends, retry the update operation you were originally trying to perform. Hopefully, it should succeed now.

My last iPhone 4 software update to 7.0.4 resulted in overall slower phone function. Any solution to that?

My last iPhone 4 software update to 7.0.4 resulted in an overall reduction in speed with all the phone functions. Anyone know of a solution?

Early reports of the iOS 7.1 beta indicate that it is faster. Other than waiting, one other thing you might try is the following: http://www.macobserver.com/tmo/article/disable-app-zooming-for-quicker-switching -unlocking

Nokia Software Updater - Error 1720

Hi, I would be very grateful if anyone could help with the following problem:
I have downloaded Nokia PC Suite - this works fine..
When I try to download Nokia Software Updater, I receive the following error:
"Error 1720: There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor. Custom action Kill_process error -2147217407, : Line 5, Column 1, "
Could anyone please advise what I can do. (I am not very technical - so any basic advice would be appreciated!)
I am using Windows XP - Home edition. I have a Nokia 5800
Thank you

If you experience behavior such as application errors or scripts that used to work are no longer working, you may have a corrupted WMI repository. To fix a corrupted WMI repository, you have to reinstall WMI. Follow these steps:
For Windows XP Service Pack 2
Click Start, Run and type the following command:
rundll32 wbemupgd, UpgradeRepository
This command is used to detect and repair a corrupted WMI Repository. The results are stored in the setup.log (%windir%\system32\wbem\logs\setup.log) file.

Ipod Software Update: Error 1432

Can anybody help? I've tried to upload the last two software updates to my Ipod without success. The last time I've tried, I've got an "unknown error" (1432) message which I can't seem to find any info on. Any ideas?
Thanks,
Paul

Sorry, I can't help but I have a similar problem. "The iPod <iPod name> could not be restored. An unknown error occurred (1432)." My 30GB iPod video (5th generation) crashes whenever I try to sync it. I either get the error dialogue, or the 'device removal' dialog box after roundabout 4 minutes. But the connection is all right. I even tried a different cable. And a different computer. It mounts perfectly, starts to sync my library, but gets stuck after syncing a few songs. I thought the songs might be corrupted. So I tried sync my photos, not my music library. But the outcome is the same. Tried to restore. Worked once. Later, when I tried to sync the same s**t happened again. Now I can't even restore the iPod anymore, because the errors occur before the iPod can be restored. Tried to reset the iPod. Nothing. Tried the diagnostics, manual and auto. Auto shows M25 diagnostics 0.7 completed PLL: 0. Does anyone know what that means? The manual diagnostics for memory results in "Checksum=0x0CFF" for flash and "RUN: BL on / PASS: BL blink / FAIL: BL off" for SDRAM... Does that mean the memory is f**ked? Once I restart the iPod it works fine, I can navigate thru the menus etc. (Pointless without music on the iPod and without the possibility to sync...)
If the RAM was broken the iPod shouldn't boot at all, am I right?
Can anyone help???
I am getting frustrated... the iPod is just a little bit too old for warranty!

My computer install software updates error

there a problem with this windows installer package a script required for this install complete could not be run.
contact you support personnel or package vendor. custom action kill process script error 2147217406 line5
column 1

Welcome to Apple Support Communities
First of all, install OS X 10.7.5 from the Apple website > http://support.apple.com/kb/dl1582
After installing OS X 10.7.5, open  > Software Update, and install updates. This is often caused because there's a 10.7.4 update for some Macs that is installed with 10.7.5, and this makes a conflict that stops the update installation

Software Update errors

I installed Leopard on my G5 iMac yesterday and updated the install to 10.5.7. Today I checked "Software Update" and got a list of seven updated apps, which I downloaded. When I tried to install them I got an error message for two of them: Safari 4.0.2 and Java OSX 10.5 Update 4 v. 1.0. The message read "Some of the checked updates could not be saved. The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by 'Apple'." I tried repeating the download from "Software Update," but ran into the same problem on my second try.
I eventually downloaded the Safari updated successfully from the Apple Support site. I haven't tackled Java yet. But I'm wondering why OS X 10.5.7's "Software Update" would be downloading bad files in the first place? Is this a virus problem? Should I be wary of the apps that "S.U." installed successfully?

More likely it's a problem on your computer. Try the following:
Fix for Software Update
See Troubleshooting Automatic Software Update in Mac OS X.
Delete the following files:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist
"xxx" is a number.
/Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder)
See, too:
Troubleshooting Automatic Software Update in OS X
When Software Update Won't Work (System cannot see or install updates)

ITunes won't open ; Apple software update error

When I double click iTunes, the computer thinks briefly (hourglass) then does nothing. iTunes won't load.
QuickTime Player opens fine.
But Apple Software Update now gives me a strange error message.
Anybody know how to interpret it? Might it be linked to my iTunes not loading?
The procedure entry point
?CreateProductsFromXML@CSUCatalogObject@@QAEXP6AIPAXIIJ@Z0IV?$CStringT@_WV?$StrT raitMFC@_WV?$ChTraitsCRT@
_W@ATL@@@@@ATL@@@Z could not be located in the dynamic link library SoftwareUpdateFiles.dll.

I'm having similar issues on PC Windows Ultimate 7 32bit. Husband tells me iTunes updated last night on both his and my laptops (same OS), without asking for confirmation, which I thought was unusual. Tried opening iTunes various times today and no response. Restarted and still no improvement.
Tried repairing and uninstalling iTunes, very slow and glitchy but eventually seemed to have got rid of the software. Downloaded most recent installer link from Apple website and attempted reinstall, but it didn't get past the empty-barred status window.
Aborted and found an old installer from earlier back-up - version 10.2 something. Install appeared to run smoothly but I still can't actually open iTunes.
Any help appreciated as we now have two laptops that won't shut down properly (seems they think iTunes is still running, even though we can't access it or close it in Task Manager), 2 iPhone 4s and an iPad that we can't use properly!
Apple....are YOU listening?!

C2 03 Software update error code 12052

Hello,
while updating my C2 03 device software with Ovi suite, my device automatically got switch off and getting error that my device is disconnected, try connecting by removing battery and USB cable and reinsert both and press power button for one second, but doing these stuff for 2 or 3, things not worked and in last I'm getting error code of 12052.
Please help how this will fix.

Here is the correct version of the same mail.
Software update was also givinf me Error. Then it informed me to un install your OVI suite and re install. even after that some other error code persists.
The crux of the problem is that if your USB port is not directly connected to your CPU, the software update is not possible.
In most of the laptops the USB port is connected through a USB HUB. This prevents the softwareupdate. Remedy ... try updating at a different hardware OR go to NOKIA CARE.
Bye
sd55

Apple Software Update error- "Entry Point not found"

I have had Apple Software Update/ iTunes on my PC for over 4 years. Today, randomly, when I went to update iTunes to the new 10.5 version, Software Update did not prompt me to update. That was odd, but I didn't realize anything was amiss yet at this point.
In iTunes, I went Help > Check for Updates which indicated the new version was downloaded. When promted whether I'd like to update, I hit yes, which even more oddly took me to apple.com to download iTunes all over again. (Normally, updates download from within iTunes and it's an update, not a full hour-long re-download.)
I didn't want to redownload iTunes (what would happen to all of my previously downloaded apps and music, set playlists?) so I opened Software Update, and got the following error message:
SoftwareUpdate.exe - Entry Point Not Found
The procedure entry point ?CreateProductsFromXML@CSUCatalogObject@@QAEXP6AIPAXIIJ@ZOIV?@CStringT@WV?$StrT raitMFC@WV?ChTraitsCRT@W@ATL@@@@@ATL@@@Z could not be located in the dynamic link library SoftwareUpdateFiles.dll
Strange, right?
So my questions.
1.) Does anyone know why Apple Software Update would suddenly get errors? I've used it recently (this past weekend?) and everything was fine.
2.) Is there a way to fix Software Update, since I'll surely need it in the future.
3.) In the meantime, should I proceed with re-downloading the full version of iTunes again, and will it mess up anything I currently have in my iTunes library? Would I need to back it up or do anything to help ensure there are no further problems?
Thanks for your help. To say I'm confused is an understatement!

Well... after I posted this, some info from other posts came up and I found the answer!
In case anyone has the same issue that runs across this... this worked for me perfectly.
Correct Answer by Sposivo on Aug 19, 2011 5:23 PM
"Start, Control Panel, Add & Remove Programs, Apple Software Update, Change, Repair" - this fixed it for me.
See the answer in context

Software Update error on Mountain Lion

issues with app store when checking for software update an error message pops up stating "error=NSURLErrorDomain error -1100" and is unable to check update.this is on Mountain Lion 10.8.1 on my mid 2012 macbook pro 13''. it juat started acting like this from today. what should i do??

you can download it from here:
http://www.apple.com/itunes/download/
if you want to update to the new iTunes...!
Saludos

Windows software update error

I 'm getting notification saying there is software update for my phone but after it's downloaded I'm getting error message saying "the update was downloaded but couldn't be opened 8018830f error".
can any one solve this issue for me please.

I shall suggest you to kindly repost your problem here:Windows Phone
S.Sengupta, Windows Entertainment and Connected Home MVP

Software update error - Package Authoring: my.result.title ...

Similar Messages

Maybe you are looking for