Software Update error - SCCM 2012 SP1

HI,
I have SCCM 2012 SP1 installed on Windows server 2008 R2 server. I have configured SUP role and tried sync from sccm console. I get the below error.
LOg:
WSUS sync running~ $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:11:42.047+00><thread=3840 (0xF00)>
WSUS sync running~ $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:12:42.255+00><thread=3840 (0xF00)>
Microsoft.SystemsManagementServer.WSUS.WSUSMSPException: WSUS sync failed with UssCommunicationError: ~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.IsSyncRunning() $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:13:12.462+00><thread=3840
(0xF00)>
Done using DEVSWAD\SWDTR-SRV-CMPATCH credentials~ $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:13:12.478+00><thread=3840 (0xF00)>
Failed to set Subscriptions on the WSUS
. Error:(-2146233088)Unknown error 0x80131500~ $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:13:12.478+00><thread=3840 (0xF00)>
STATMSG: ID=6603 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=DCMPSTPV01.devswad.net SITE=SCW PID=2764 TID=3840 GMTDATE=Thu Jan 30 14:13:12.479 2014
I have configured proper proxy account which can connect to microsoft website and the port i have configured in proxy to allow is
80 and 443. I feel the port i need to allow may be i am not sure 8530 and 8531. Or 80 and 443 is fine. Please help
Regards, Pratap

It says to check WCM.log which i posted above
wsync log:
Sync failed: WSUS update source not found on site SCW. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.118+00><thread=4388 (0x1124)>
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=DCMPSTPV01.devswad.net SITE=SCW PID=2764 TID=4388 GMTDATE=Fri Jan 31 14:02:14.119 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found on site SCW. Please
refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.122+00><thread=4388 (0x1124)>
Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.122+00><thread=4388 (0x1124)>
Setting sync alert to active state on site SCW $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.123+00><thread=4388 (0x1124)>
Sync time: 0d00h00m00s $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.132+00><thread=4388 (0x1124)>
Wakeup for a polling cycle $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:14.495+00><thread=4388 (0x1124)>
Starting Sync $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.157+00><thread=4388 (0x1124)>
Performing sync on retry schedule $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.163+00><thread=4388 (0x1124)>
Read SUPs from SCF for DCMPSTPV01.devswad.net $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.577+00><thread=4388 (0x1124)>
Found 1 SUPs $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.830+00><thread=4388 (0x1124)>
Found active SUP DCMPSTPV01.devswad.net from SCF File.~ $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.833+00><thread=4388 (0x1124)>
Sync failed: WSUS update source not found on site SCW. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.876+00><thread=4388 (0x1124)>
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=DCMPSTPV01.devswad.net SITE=SCW PID=2764 TID=4388 GMTDATE=Fri Jan 31 15:02:15.882 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found on site SCW. Please refer
to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.892+00><thread=4388 (0x1124)>
Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.912+00><thread=4388 (0x1124)>
Setting sync alert to active state on site SCW $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.915+00><thread=4388 (0x1124)>
Sync time: 0d00h00m01s $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:17.024+00><thread=4388 (0x1124)>
Next scheduled sync is a retry sync at 31/01/2014 16:02:15 $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:17.151+00><thread=4388 (0x1124)>
Regards, Pratap

Similar Messages

Client not receiving the software update FROM SCCM 2012 R2

We have SCCM 2012 R2 installed and configured for SUP.and i have synchonice the SUP with WSUS server in the same which is there in the same machine.
Now i can able to deploy the software update from SCCM 2012 R2 without any erro to the windows 7clients, but client side when i check there is no update installed in the clients , but seems there is no error in the client logs

Hi,
I'd start with running a "Software Updates Scan Cycle" from the configuration manager control panel applet and check the log file Windowsupdate.log, WUAhandler.log.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Deploy Java Updates using SCCM 2012 SP1 and SCUP 2011

What is the best way to deploy Java updates using sccm 2012 SP1 and SCUP 2011?

I didn´t find Kent´s blog useful when talking about Java. I can deploy Adobe products fine, but I have to import Java manually because not having Shavlik certificate. So with that said, I have the fallowing problem;
I have full offline installer unpacked, .msi file and Data1.cab. When I´m importing these binaries to SCUP, I only can point to .msi. Doing that, installation fails in client side fails because of lack of data1.cab fine, which is the main file.
Should I use some other downloaded files of Java? I couldn´t find any Java-update-file only type of files to download.

How would I rollback or remove a problematic software update using SCCM 2012?

How would I rollback or remove a problematic software update using SCCM 2012?
Primarily I'm thinking these patches would be Windows Vista/7/8 OS patches, but would include other Microsoft updates as well (eg. Office, etc.).
Thanks,
Bill

Hi,
You need to uninstall it using software distribution like a package/program, here is a script that can help you with the uninstallation.
http://blog.coretech.dk/jgs/vbscript-uninstall-updates-on-winxpwin2003-win7-and-win-2008-r2-automatically/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

CCMSETUP not updating on SCCM 2012 SP1 CU3/CU4 primary site

I have a SCCM 2012 SP1 CU3 primary site and i can't upgrade the local installed SCCM Client.
The error I get in ccmsetup.log is:
<![LOG[MSI: Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002]LOG]!><time="15:44:22.408-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:300">
<![LOG[MSI: Action 15:44:22: Rollback. Rolling back action:]LOG]!><time="15:44:22.562-60" date="02-08-2014" component="ccmsetup" context="" type="0" thread="2496" file="msiutil.cpp:314">
<![LOG[File C:\windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
Action: CcmRegisterHostingConfiguration.
ErrorMessages:
Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002
]LOG]!><time="15:45:00.798-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:872">
<![LOG[Client installation has failed too many times. Ccmsetup will now abort.]LOG]!><time="15:45:00.830-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7941">
<![LOG[Successfully deleted the ccmsetup service]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2496" file="ccmsetup.cpp:3320">
<![LOG[InstallFromManifest failed 0x80070643]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7086">
<![LOG[CcmSetup failed with error code 0x80070643]LOG]!><time="15:45:05.832-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2324" file="ccmsetup.cpp:10544">
I have this on my primary and secondary servers as well.
Is upgrading to R2 recommended and will that solve this issue ?
When googling to this issue i found that there is a solution for this: remove MP, upgrade Client, install MP.
But this is my primary and secondary and on secondary i am not allowed to remove the MP. It is hardcoded enabled.

Try the following steps to specify the hotfix when installing the client.
1. Open an elevated command prompt.
2. Run a command line similar to the following – if CU3 has already been installed, the MSP file below should be on the site server, in the
\\servername\SMS_SITE\Client\hotfix folder:
\ccmsetup.exe PATCH=\Configmgr2012ac-sp1-kb2882125-x64.msp
Juke Chou
TechNet Community Support

RPC server is unavailable when trying to download software updates through SCCM 2012

I have read plenty of articles concerning RPC server problems and non of them seem to relate to this issue. I have been trying to set up my CM 2012 server to deploy software updates and I am to the point of just needing to filter the updates, download
and deploy them. When I try to download the updates from the internet, I get an RPC server unavailable error and it closes. I have checked the RPC service and all of its dependencies, verified that it is looking for a correct microsoft update service
point, disabled my firewall and opened all ports on the firewall just to verify that it wasn't that, and ping tested a few other external sites (aka: Newegg.com/google.com) to see if I could get replies (which I did).
Not really sure where to go from this point. Anyone else encounter this before or know how one might fix it?
Jeffrey IT - Tech Support Tier 2 Buyseasons, INC

Apologies, it was only like 6 lines in CMTrace and I thought it posted ok. Here is the text version:
Trying to connect to the root\SMS namespace on the syscenter.BUYSEASONS.com machine. $$<Software Updates Patch Downloader><06-28-2012 15:46:04.463+300><thread=4756 (0x1294)>
Connected to \\syscenter.BUYSEASONS.com\root\SMS $$<Software Updates Patch Downloader><06-28-2012 15:46:04.465+300><thread=4756 (0x1294)>
Trying to connect to the \\nbsccm01.buyseasons.com\root\sms\site_NB2 namespace on the nbsccm01.buyseasons.com machine. $$<Software Updates Patch Downloader><06-28-2012 15:46:04.467+300><thread=4756 (0x1294)>
ConnectServer() failed to connect to nbsccm01.buyseasons.com $$<Software Updates Patch Downloader><06-28-2012 15:46:04.480+300><thread=4756 (0x1294)>
ERROR: DownloadContentFiles() failed with hr=0x800706ba $$<Software Updates Patch Downloader><06-28-2012 15:46:04.481+300><thread=4756 (0x1294)>
Trying to connect to the root\SMS namespace on the syscenter.BUYSEASONS.com machine. $$<Software Updates Patch Downloader><06-28-2012 15:46:04.680+300><thread=4756 (0x1294)>
Connected to \\syscenter.BUYSEASONS.com\root\SMS $$<Software Updates Patch Downloader><06-28-2012 15:46:04.682+300><thread=4756 (0x1294)>
Trying to connect to the \\nbsccm01.buyseasons.com\root\sms\site_NB2 namespace on the nbsccm01.buyseasons.com machine. $$<Software Updates Patch Downloader><06-28-2012 15:46:04.683+300><thread=4756 (0x1294)>
ConnectServer() failed to connect to nbsccm01.buyseasons.com $$<Software Updates Patch Downloader><06-28-2012 15:46:04.685+300><thread=4756 (0x1294)>
ERROR: DownloadContentFiles() failed with hr=0x800706ba $$<Software Updates Patch Downloader><06-28-2012 15:46:04.687+300><thread=4756 (0x1294)>
Trying to connect to the root\SMS namespace on the syscenter.BUYSEASONS.com machine. $$<Software Updates Patch Downloader><07-23-2012 16:47:05.531+300><thread=7108 (0x1BC4)>
Connected to \\syscenter.BUYSEASONS.com\root\SMS $$<Software Updates Patch Downloader><07-23-2012 16:47:05.550+300><thread=7108 (0x1BC4)>
Trying to connect to the \\nbsccm01.buyseasons.com\root\sms\site_NB2 namespace on the nbsccm01.buyseasons.com machine. $$<Software Updates Patch Downloader><07-23-2012 16:47:05.552+300><thread=7108 (0x1BC4)>
ConnectServer() failed to connect to nbsccm01.buyseasons.com $$<Software Updates Patch Downloader><07-23-2012 16:47:05.565+300><thread=7108 (0x1BC4)>
ERROR: DownloadContentFiles() failed with hr=0x800706ba $$<Software Updates Patch Downloader><07-23-2012 16:47:05.566+300><thread=7108 (0x1BC4)>
Trying to connect to the root\SMS namespace on the syscenter.BUYSEASONS.com machine. $$<Software Updates Patch Downloader><07-23-2012 17:04:05.693+300><thread=5124 (0x1404)>
Connected to \\syscenter.BUYSEASONS.com\root\SMS $$<Software Updates Patch Downloader><07-23-2012 17:04:05.694+300><thread=5124 (0x1404)>
Trying to connect to the \\nbsccm01.buyseasons.com\root\sms\site_NB2 namespace on the nbsccm01.buyseasons.com machine. $$<Software Updates Patch Downloader><07-23-2012 17:04:05.696+300><thread=5124 (0x1404)>
ConnectServer() failed to connect to nbsccm01.buyseasons.com $$<Software Updates Patch Downloader><07-23-2012 17:04:05.699+300><thread=5124 (0x1404)>
ERROR: DownloadContentFiles() failed with hr=0x800706ba $$<Software Updates Patch Downloader><07-23-2012 17:04:05.700+300><thread=5124 (0x1404)>
Nbsccm01 is also our migration server that is no longer in service, is there anyway to disconnect this server permanently?
Thanks!
Jeffrey IT - Tech Support Tier 2 Buyseasons, INC

Alert: Synchronization failure alert for software update point ( SCCM 2012 R2)

SCCM 2012 R2
Alert: Synchronization failure alert for software update point: MY.net(MY)
Alert type: Software update synchronization failure
Severity: Critical
Active time (UTC): 13-09-2014 19:37:34
Condition: Generate an alert if software updates synchronization fails for the Software Update Point role at the
MY (MY) site.
Alert Text: Software updates synchronization for the Software Update Point role at the
MY (MY)) site failed.
Please let me know what will be the cause of this Alert, how to resolve it

The reason is stated in the message: "Generate an alert if software updates synchronization fails
for the Software Update Point role at theMY (MY) site"
Examine wsyncmgr.log
Torsten Meringer | http://www.mssccmfaq.de

Some of the machines are not installing windows updates in SCCM 2012 SP1

I have deployed the current month patches to the machines. But, some of the machines are failed to install.
Most commonly I am getting the below errors in windowsupdate.log ,
Report REPORT EVENT: {811D3FE5-A254-4C7E-B7F1-6132320AD5E0}
2015-02-23 08:18:40:851-0000 1
148 101
{00000000-0000-0000-0000-000000000000}
0 80072ee2
CcmExec Failure
Software Synchronization Windows Update Client failed to detect with error 0x80072ee2.
::OnScanComplete -Scan Failed with Error=0x80072f78
How to resolve this issue with installing windows updates?
0x80072ee2 looks like time out error.

I have uploaded the log file on dropbox
https://www.dropbox.com/s/bt09vpyhab56dgs/WindowsUpdate%20log.txt?dl=0
I am going to check WSUS IIS log file. I will keep you posted with my findings.
I dont know how to confirm whether the client is talking with wsus server or not. But, I could see some more errors in softwareupdates related logs,
Below is the error in updatestore.log,
Failed to refresh Resync state message. Error = 0x87d00310.
Below are the errors in update deployment.log,
Job error (0x80072ee2) received for assignment ({1566B12B-1731-479D-BFD1-98F2D24346B2}) action - Update Deployment
Job error (0x80072ee2) received for assignment ({1566B12B-1731-479D-BFD1-98F2D24346B2}) action
Updates will not be made available

How to remove the parent-child software update point in sccm 2012 sp1

I have a CAS , Primary site server(1) and secondary site servers (7). I have software update point installed on CAS, Primary server and Secondary site servers as well.
I have a situation to reinstall the software update point which is in primary site server.
So, How to reinstall the software update point in primary site server since this is located in the middle between CAS and secondary site servers.
So, please suggest me, do I have to do anything special apart from the normal steps to uninstall and reinstall the SUP point on primary site server?
I have referred few posts on how to remove SUP
https://social.technet.microsoft.com/Forums/en-US/c7258aad-d968-427b-8826-4829916c14c9/remove-and-re-add-software-update-point-sccm-2012?forum=configmanagersdk
and how to install SUP
http://www.windows-noob.com/forums/index.php?/topic/4467-using-sccm-2012-in-a-lab-part-6-deploying-software-updates/

Hi,
>> please suggest me, do I have to do anything special apart from the normal steps to uninstall and reinstall the SUP point on primary site server?
I just tried to reinstall the SUP on the Primary site(only one SUP on Primary site and there is a SUP on Secondary site). The SUP upstream data source of the Secondary site showed empty and greyed out. But the upstream data source resumed after a while.
It seems nothing special needs to be done.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCCM 2012 SP1 WSUS/Software Update Point Synchronization error on CAS.

Hi All,
Good day to all you.
I would like to seek all your help on this issue that i have encountering.
My SCCM 2012 SP1 CAS are having a synchronization error in WSUS/Software update point. The CAS have intergrated WSUS role in it. The last good synchronization was on July 16, 2014. No error log found on WCM.log and WSUSctrl.log
Error:
Sync failed: UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall).
Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM 5776 (0x1690)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:05:32.796 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
ISTR1="UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM 5776 (0x1690)
Sync failed. Will retry in 60 minutes
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
below are wsyncmgr.log:
Setting sync alert to active state on site C01 SMS_WSUS_SYNC_MANAGER (0x1690)
Sync time: 0d00h01m14s SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Wakeup for a polling cycle SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Starting Sync SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Performing sync on retry schedule SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Read SUPs from SCF for MYHQKUL990707S.sdb.com SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
Found 1 SUPs SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Found active SUP MYHQKUL990707S.sdb.com from SCF File.
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:04:20.750 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:04:20 PM
5776 (0x1690)
Synchronizing WSUS server MYHQKUL990707S.sdb.com SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
STATMSG: ID=6704 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:04:21.763 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:04:21 PM
5776 (0x1690)
Using account sdb\SCCM-Admin to connect to WSUS Server
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
Synchronizing WSUS server myhqkul990707s.sdb.com ...
SMS_WSUS_SYNC_MANAGER 440 (0x01B8)
sync: Starting WSUS synchronization SMS_WSUS_SYNC_MANAGER
440 (0x01B8)
Sync failed: UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall). Source:
Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM
5776 (0x1690)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:05:32.796 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
ISTR1="UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM
5776 (0x1690)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
All response is much appreciated
Thank You

Hi,
I recommend you look at the IIS log. Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 SP1 errors when downloading updates

Currently using SCCM 2012 SP1 with CU2 and I am having some update download issue with Automatic Deployment Rules.
The Environment is:
Server 2008 R2
SCCM 2012 SP1 CU2 (Upgraded from SCCM 2012 CU2)
I created an Automatic Deployment Rule for Adobe Flash. Since I was having the same issue with Adobe Reader, when I published via SCUP to WSUS I chose not to sign the updates.
After publishing to WSUS I then sync SCCM, I see the updates and then in the ADR I had it download the updates and I see this error:
Authentication of file C:\Windows\TEMP\CABDEC5.tmp failed, error 0x800b0004 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 3712 (0x0E80)
ERROR: DownloadContentFiles() failed with hr=0x80073633 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download the update from internet. Error = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download ContentID 16845337 for UpdateID 16841530. Error code = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Now the funny thing is if I go to the update itself within update group that Flash is a member I can right click it and choose download and the error doesn't occur.
I observed that the UNC path for ADR Adobe flash, when the rule is ran, is populated with folders that have a name something like 44738297895427890.1 or 423154325378u867234789.1. I have come to realize that those are failed downloads. So for the
heck of it I then right clicked the update itself and chose download and it downloaded without issue. Now I'm guessing that when I chose to download directly from the update maybe the system is getting the update from adobe and not from wherever the rule was
trying to get it from. I then see the .1 removed from the directory name and there are updates within them.
Just for clarity here are the steps I go through from SCUP to Syncing...
Log in to WSUS server
Run SCUP as administrator
Get notified there are updates from Adobe and let SCUP download updates
Find the updates the specify the following publishing options
Full Content
Sign all software updates with a new publishing certificate .... (Is this necessary by the way?)
Then click Next
After that's done I then go to SCCM Manager Console and go to Software Updates and right click to Synchronize them.
After that's done then I run the ADR for Adobe Flash and when it goes to download the updates that's when the error occurs.
What am I missing?
Also, while I wait for help I just recently added the WSUS SCUP certificate to the SCCM server to see if by chance that fixes stuff. If it does then I'll post the results of adding the certificate to the SCCM server.
One other thing, is there a way to delete updates? When I was having this issue in the past, I went in to SCUP I marked the updates as expired and then deleted the updates. Went to SCCM and synchronized the updates and they went from not expired to expired
then I waited, maybe 30 days or so before I could add the updates back in.
Thanks for the help!

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Have you seen the note at the bottom of this page about this error?
http://technet.microsoft.com/en-us/library/bb932193.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 SP1 - Offline Servicing failure - Failed to find or access the update binaries to be applied on the image

Hi there
Trying to patch a new Windows 7 SP1 image within SCCM 2012 SP1, but it's failing.
I've searched for information on the failure messages I am seeing, but although there is a LOT of information online concerning Offline Servicing failures, I can't find anything on the errors I am seeing.
I've tried injecting a single update, five updates and ten updates, no difference, same messages.
We have McAfee Access Protection disabled, as we know Offline Servicing simply won't work if this is running.
In the console, in Schedule Update Status for the image I am trying to update, the following message is shown:
"Failed to find or access the update binaries to be applied on the image."
That sounds as if the process can't find the actual .cab file for any update I've tried to inject, but I don't know why it wouldn't be able to do that, we have Software Updates configured and the .cab files are on the same server.
When I looked at the OfflineServicingMgr.log file, I see the following entries:
Processing image at index 1        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:52:49        8272 (0x2050)
Mounting image at index 1. Image file='D:\ConfigMgr_OfflineImageServicing\PackageID\W7_Image.wim', MountDirectory='D:\ConfigMgr_OfflineImageServicing\PackageID\ImageMountDir', ImageFileType='WIM', Mode='ReadWrite'        SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:52:49        8272 (0x2050)
Image OS information : MajorVersionMS = 6, MinorVersionMS = 1, MajorVersionLS = 7601, MinorVersionLS = 17514        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31
8272 (0x2050)
Failed to find properties of file 4        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31        8272 (0x2050)
UnMounting Image (Commit Changes = 0) ...        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31        8272 (0x2050)
Completed processing image package PackageID. Status = Failed        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
Updated history for image package PackageID in the database        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
Schedule processing failed        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
Processing completed for Schedule with ID 16777237        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
STATMSG: ID=7910 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_OFFLINE_SERVICING_MANAGER" SYS=SCCMServer.domain SITE=Site_Code PID=8560 TID=8272 GMTDATE=Sat Jun 14 13:54:04.964 2014 ISTR0="16777237" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0        SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:54:04        8272 (0x2050)
Schedule processing thread stopped        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:05        8272 (0x2050)
I'm not sure what file "Failed to find properties of file 4" is referring to, whether dism.exe, an update or the image itself, but immediately after this message appears the image is unmounted. After that this message shows:
"Completed processing image package PackageID. Status = Failed"
As I say, there's a lot of information available re Offline Servicing but I haven't found anything with these particular messages.
If anyone has encountered this before, I'd appreciate any information you have.
Regards,
John.

Hi,
I think file named 'NO_SMS_ON_DRIVE.SMS’ might be causing this issue. If this file is present in logical drives, then please give it a shot one more time after deleting this file from the logical drives.
Due to this file, it might be preventing 'smsexec' service to skip the drive when looking for content. So worth a try!
After deleting this file, you also need to restart 'smsexec' service to reflect the changes. You can also verify from below registry value & ensure that all of your logical drives (specially where SCCMContentLib directory resides) should be listed
over there
'HKLM\Software\Microsoft\SMS\DP\ContentLibUsableDrives'
Hope this will help!
Cheers | Navdeep Sidhu

SCCM 2012 SP1 - Software Center appears twice in Start Menu

Hi guys,
i just finished implementing a fresh SCCM 2012 SP1 Installation for a customer. The whole OSD works like a charm (except some issues with the latest Windows updates breaking the whole OSD, will open a separate thread for this soon), but after the deployment
the Software Center is appearing twice in the Start Menu (We're using Win7 Enterprise SP1 x86 English with 5 integrated language packs). I first thought this has something to do with the integrated language packs, but both Start Menu entries
are always in the same language.
The strange Thing is, that one entry for the SCCM Software Center is called "Software Center" and the other one "SoftwareCenter" (without a space). We configured 2 Client policies, one with EP-enabled and one without EP. We
deployed the Client Settings to different collections so i don't think that this is causing the Problem?Do you guys have any idea why this is Happening?
Has anyone ever seen this? See a screenshot below:
Thank you.
Cheers
Stefan

Thanks for your Response Thomas.
I don't think it is related to the upgrade to SP1.I think it might be a General issue in SP1. I started with a fresh SCCM 2012 SP1 Installation and i also have 2 Software Center entries in my start menu. If i check the shortcut i can see that one shortcut
was created when i captured my base Image, the other one was created during the Install OS Task Sequence.

Windows 8.1 system with new Office 2013 install not pulling down any Office 2013 updates from my SCCM 2012 SP1 server

Hi,
I've just setup a new Windows 8.1 system and added to my SCCM 2012 SP1 server and all is good and it pulled down all the correct Windows updates and pulls down automatically the FEP updates that are distributed from SCCM 2012 daily.
I just installed Office 2013 on this system and have activated it as necessary. The problem is that the system doesn't seem to be pulling down any of the Office 2013 updates that have distributed thru SCCM. I have other systems with
Office 2013 installed and they have pulled down Office 2013 updates in the past when I published them.
If I look at the Office 2013 updates in the SCCM console software section, I can see that for example it shows that Office 2013 SP1 (x86) is needed by one system and installed on 8 other systems and shows as downloaded and deployed.
I've restarted the new system multiple times and also tried to force a software update check from the Configuration Manager applet but nothing seems to happen.
What can I check to try and determine what the problem is?
Thanks in advance,
Nick

Yes, the 8.1 system is a member of collection where the update deployment is targeted.
Are there any specific logs I should check in the client? If I check the WindowsUpdate.log I can see messages about the machine pulling down the FEP updates but that's all it appears to be doing.
in CCM\logs, focus on the updatehandler and updatedeployment, to begin with
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

WSUS SP2; SCCM 2012 SP1; Sync failed: WSUS update source not found

Hi,
I have installed the Fresh SCCM 2012 SP1 and WSUS 3.0 SP2 + KB2720211 + KB2734608. However, still the Sync is getting failed. This is what I am getting in the wsyncmgr and WCM logs:
wsyncmgr:
Sync failed: WSUS update source not found on site PR1. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=3668 GMTDATE=Fri Jan 09 18:00:00.537 2015 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found
on site PR1. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
1/9/2015 12:00:00 PM 3668 (0x0E54)
WCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Supported WSUS version not found SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
STATMSG: ID=6607 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.489 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Remote configuration failed on WSUS Server.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.515 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
I have used the default port numbers 80 and 443 still the sync is failing. Please provide your advise to fix this issue.
Regards,
Malwinder

WCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
It's not only a matter of installing the console, but also those hotfixes on a remote server ...
Torsten Meringer | http://www.mssccmfaq.de

Software Update error - SCCM 2012 SP1

Similar Messages

Maybe you are looking for