Software update error while connecting to internet

Hi
I have a problem with my 3 computer (all mac) They cannot get sofware update while connecting to the server... it worked last week and now it don't on 3 computer!! It seem that they have a problem on the apple server maybe?... That's the message : A networking error has occurred: timed out (-1001). Make sure you can connect to the Internet, then try again. But I CAN connect (with mail, safari etc..) to the internet no problems, I did not touch anything on the network since the last update (friday the 9th dec.) and It's weird that all my 3 computer have the same problem... ??? Will wait t'ill tomorrow, but I Am I alone to have this message??

The server is down Genevieve. You can still download any updates from the Download page.
John

Similar Messages

Software Update says not connected to internet

Today, when loading my web email into my local
mailbox, it stopped half-way through. Nothing else
will load in. The emails are still on my internet
web page mail. So, then I tried to see if there are
any software updates. The message comes back that I
am not connected to the internet. Of course, I am or
I would not be here. I sent a test email and it was
sent and received by my web mail account, but will
not, as any others, come on over to my local mailbox.
Note: I do not have to have any browser open to
receive my local email. But today, it just stopped.
Help! Please.

I will call them tomorrow.
My ISP is Internet America.
I have been with them since they took over
Cyberamp back in the 90s.
I have DSL.
My terminology is limited. The local mail I am speaking
of is the program that came on my Mac when I
installed it. I can only access it when I am on this
particular computer. Otherwise, I call up Internet
Amer. webmail. The mail stays there, until I launch
my "local" mail here at home. This has never happened
before and today it brought about half my email over
and then just quit. Since then, nothing has come over.
I can go to the internet in every other way except when
trying to have my software updates checked. It says I
am not connected to the internet.
As I said, I will call them tomorrow and will post what
they say.
Thanks very much.

Safari, Software Update can't connect to Internet

Small home network. Mac was configured as PPoE. I purchased a LinkSys Router Wireless G router. Configured it so I don't have to enter username and password for internet any more. My windows computers work fine. My Mac connects to the to the internet with Firefox. However, software update, itunes and Safari can't connect. Any thoughts

I am having a similar problem, but only sometimes.
Did anyone ever get back to you on this?
No one got back to me but the problem is fixed. I made a new network connection to work with the router and then every thing was ok.

HT1483 I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is wor

I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is working. Was thre a change in the internet address for NANO software updates? Do I have to reconfigure something in Itunes to point to the correct address?

What version of iTunes are you using? The latest is 10.6.3. In iTunes, choose Help -> About iTunes to check the version number. If it's lower than 10.6.3, download the latest version from here.
B-rock

Ovi Suite Software Updates-Error No internet Conne...

My Phone Nokia 5800 Xpress Music..
Ovi Software update fails while cheking for updates pops up
Network Connection error dialog
Nokia Ovi Suite software update service is not responding Make sure the internet connection is working or check firewall settings, and try again.
btw I have a broadband,if firewall is turned off...
I dont know what else to do.
I click ok, its says downloading for ever....
I tried update via wifi my phone asks for server profile...which i have no idea about.
I have been trying to update for firmware for a week i dont it happening... damnnn
Nokia Ovi Suite 2.1.1.1
Ovi Player 2.1.10304.0
Nokia Photos 1.6.434.0
PC Connectivity Solution 10.6.2.0
Connectivity Cable Driver 7.1.27.0
Nokia Ovi Suite Software Updater 2010.6.0.60359
Maps Service API 3.0.38.0
Nokia mPlatform 2.6.86
Ovi Desktop Sync Engine 1.1.0.82
Operating system:
Microsoft Windows Vista 64-bit Edition, Service Pack 2
Language: English
Detected internet browsers:
- Microsoft Internet Explorer 8.0.6001.18904
- Mozilla Firefox 3.6.3 (Default browser)
Detected Bluetooth stacks:
- Microsoft (Version: 6.0.6000, Build: 16386)

i found the solution for the network connection error during the software update process.....
the error dialog box says to check ur connection or firewall settings...so i recommend the users who are having this problem...first of all if you have any antivirus software installed than turn it off or disable it before starting the update and then Go to- Control panel-Windows Firewall-Then turn it off. and now start the update application you will notice the change and i am sure the update will start and complete without any errors...i was also having the same problem but i tried and resolved it... and also a very important thing that you should take care of....you should make sure that no other application is using your internet connection, don't start any other downloading program because it will decrease the ovi suites downloading speed and it may cause an error...
if the problem persists after turning off ur firewall than restart ur pc and try again...
post me a thanks if your problem is resolved...
this will work with the nokia OVI Suite version 2.1.
because i had not tried to update the ovi suite because i like the 2.1 version very much...
I really tried it very much, because my father says that Try and try and try until you get success...
and i achieved the success..........

Software Update can't connect to the internet after a new install of 10.6

I had a clean install of 10.6 and after that the Software Update can't connect to the internet (the status bar hangs at the beginning and finally it prompts me the internet is not connected) while all my other applications can.
Someone help me out?

I am having exactly the same problem as well.. has anybody managed to solve this yet? I have uploaded Snow Leopard - try to connect to Software Update - the menu bar scans a little then stops and then an error saying 'Not connected to the internet'' but the connection is working fine!!
Is this a SL issue? or just an overload with the Software Update programme? I cant do anything - no update for itunes/iphone software, etc.. most annoying.
Look forward to seeing some good news and some answers to this one.
Cheers
Linda

Software Update can't connect to server -- error

I have Tiger 10.4.7 on a 600mH white G3 dual USB iBook. When I try to use the SoftwareUpdate function off the Apple Menu to check for any updates to Tiger, the "checking for new software" window starts up all right but immediately the error message window appears with "Software Update can't connect to the update server."
I'm otherwise connected to the internet all right and everything is working. I tried trashing the com.apple.softwareupdate.plist file from the Library/Preferences and the user/Library/Preference/ and restarting, but this didn't do it either.
I've had this problem before and it has "become" fixed, but I don't know exactly what sequence does it. Any help, please?
PM9600/233 (OS 8.6); G3 white iBook (10.4.7) Mac OS X (10.4.7)

No, I didn't try creating a new user, in part because once before doing that only made things more complicated and didn't solve any problems.
Software Update simply started working again. No idea why.
However, even after several days, Safari is still reporting that it cannot connect to the server for any URL put in. I've restarted Safari, reset Safari, manually emptied all caches, removed cookies. All very odd!
Firefox is working just fine.

HT1338 Software Update can't connect to the update server. Make sure you're connected to the Internet, and then try again

I have been getting this message on MAC OS 10.6.3 "Software Update can’t connect to the update server. Make sure you’re connected to the Internet, and then try again". Internet is working fine for everything else. Updating to 10.6.8 and applying all the security updates and patches [directly downloading from the apple website] has not resolved the issue. Read somewhere about a software update enabler for 10.6, installed it, but not helping.. [not sure of the update server settings to be entered] .Is there no way to make the software update work from the Apple Start Menu??

Problem solved.. Expired rules in Little Snitch caused the glitch

Software Update Error and Application connectivity problems

Hi. Hoping someone can help me with issues I've been having since we added a wireless access point to our network at home two weeks ago. I'm sharing a network with two pcs, a pc laptop and a ps3. All of which are working fine either using the wireless access point or ethernet through our router.
I have a macbook which is picking up the wireless fine, apart from a few applications. The biggest problem is that software update isn't connecting. I get a message telling me there is a networking error: NSURLError Domain - 1100. I go through the network diagnostics and it tells me that my connection is working correctly.
Another (less worrying but annoying) problem is that some widgets (facebook, wikipedia, translater etc) are not picking up the connection either. Facebook iphoto exporter also doesn't work. There is no in-built firewall in the access point and I haven't changed any firewall settings on my system (which was working perfectly with the ethernet connection). All I changed was the DNS server address.
The only time I have used airport previously is in the library at my university, where I needed to use a proxy address. I'm wondering if this may be interfering with my connection settings now, but am unsure of how to change the setting around. I'm a new mac user and this is the first issue I've had issues. Any help/suggestions are thoroughly appreciated.
thanks.

I'd been having this problem for the past few weeks (causing Software Update to fail with NSURLError -100 and the iTunes radio service to fail) and just fixed it myself.
For me the issue had to do with proxy settings in the browser versus proxy settings in System Preferences. For example, if you run Tor/Vidalia with Firefox, the browser has its own proxy settings that get changed when you activate Tor. But if you use Safari or anything else to set up the proxy, it's the network settings under System Preferences that get affected.
To check this, go to (Apple menu)>System Preferences...>Network, then choose whichever network interface you're currently using. If the lock icon in the lower left-hand corner is locked, click on it and authenticate with your password. Now click Configure... and choose the Proxies tab.
On my machine, I have "Configure proxies:" set to "Manually" (I've never used the other option, "Using a PAC file", so if you have that set I'm not sure how to debug it). Now look through the items in the "Select a proxy server to configure" panel. If there is anything checked there, it should be for a specific reason. If something is checked and you don't know why, try unchecking it.
Finally, click on Apply Now (giving your password again if prompted), close the System Preferences dialog, and try Software Update again.
This solved my problems (I had been fiddling with a local proxy for OS X Mail and Thunderbird). Your mileage may vary. Give that a shot and report back if it helps (or if it doesn't).
/HJ

HT6058 good morning.please help me with my iphone 5.i already downloaded iOS7 in my software update.but eventhough i have internet connection,verifying update said that i have no internet connection.what should i do?

good morning.please help me with my iphone 5.i already downloaded iOS7 in my software update.but eventhough i have internet connection,verifying update said that i have no internet connection.what should i do?

i try to reset my iphone but still the reply pf verifying update still the same.update failed because im no longer connected to internet.but i have full signal strength of internet.what should i try to do?

Software updater fails to connect to server. How can I fix?

Software updater fails tp connect with the server. I have tried a restart and checked network connections and internet access. I have no problems connecting to internet, App Store and iTunes Store. Help!

If you know what downloads to look for you get them from support.apple.com. For example the 10.6.8 combo update v1.1 can be found here.
The probelm is knowing what to look for and that's why softwere update comes in handy even if you don't want to have it do the downloads. What's probably going on was that the servers looked by software update were either temporarily down, or as mentioned above, overloaded. Wait a while and try it again.

Software Update can't connect to the update server.

I have an iMac 8-1 with OS is Mac OS X, version 10.7, 2.4 GHz Intel Core 2 Duo, and 3 GB 800 MHz DDR2 SDRAM memory.
When I try to update software I get this error message:
The file “AppleMobileDeviceSupportDelta.pkg” couldn’t be found on the server “swcdn.apple.com”.
Software Update can’t connect to the update server. Make sure you’re connected to the Internet, and then try again.
I don't know how to "connect to the update server" but I guarantee that I AM connected to the internet!

Software update fails on connection interrupt

I have two computers, one an Intel Core i5 runing 10.7.2, and the other a Core i7 running 10.7.3. Software Update hangs on checking for new software, or at the start of downloading. The problem seems like it may be related to Airport WiFi. I've noticed that at somewhat random timing, when Software Update is run, the Internet connection on both my DSL modem, and the AirPort Base Station network is dropped, and then comes back in a minute or two. The hang or failure to fetch files follows this interupt. Connection is solid at all other times. (I run connection timing on the menu bar). This is what I get from System.log on the Console:
Marker - May 3, 2012 6:15:05 PM
May 3 18:15:25 Gregs-MacBook-Pro installd[6631]: Starting
May 3 18:15:25 Gregs-MacBook-Pro installd[6631]: uid=0, euid=0
May 3 18:15:26 Gregs-MacBook-Pro fseventsd[40]: Logging disabled completely for device:1: /Volumes/Recovery HD
May 3 18:15:26 Gregs-MacBook-Pro com.apple.launchd.peruser.89[6638] (com.apple.mdworker.pool.0): Throttling respawn: Will start in 9 seconds
May 3 18:16:15 Gregs-MacBook-Pro Software Update[6626]: Layout still needs update after calling -[WebHTMLView layout]. WebHTMLView or one of its superclasses may have overridden -layout without calling super. Or, something may have dirtied layout in the middle of updating it. Both are programming errors in Cocoa Autolayout. The former is pretty likely to arise if some pre-Cocoa Autolayout class had a method called layout, but it should be fixed.
May 3 18:16:41 Gregs-MacBook-Pro Software Update[6626]: Could not find image named 'package'.
May 3 18:18:04 Gregs-MacBook-Pro Software Update[6626]: Could not find image named 'package'.
May 3 18:19:45 Gregs-MacBook-Pro installd[6631]: Exiting.
I get an error dialoge that says:
"Software Update can’t connect to the update server. Make sure you’re connected to the Internet, and then try again."
Now if I recall correctly that both my modem and AirPort Extreme base station are about 4 years old now, and I would consider replacing them, but I have heard rumors that Apple is having problems on the Server end for delivering updates.
Advice?

Mine is doing the same thing. Also having issues with it connecting to my time capsule correctly. I have tried running disk utilities and also restarting the computer and zapping the p-RAM. If I can't get updates how will I be able to download the Lion update that fixes the bug?? Ugh.

"Sync encountered an error while connecting: Failed to connect to the server. Please try again."

"Sync encountered an error while connecting: Failed to connect to the server. Please try again." message has appeared on both my desktop (OS 10.6.8, FF 6.0.2) and laptop (same).
This error is not covered in your help documentation.
I have an active internet connection.
I have tried resetting the Sync on the laptop several times over the last few weeks.
Please advise.
Thanks

Hi!
It seems that you are not using the latest version of Firefox. Please, update and try again: http://www.mozilla.org/firefox

Error while connecting to HTTPS WebService through Jdev

I am having issues while trying to connect to a webservice that require SSL. Has anybody seen similar exception below or any suggestion/best practice docs of how to setup the cert?
WARNING: Unable to connect to URL: https://itsolutions/AppIntegration/org/test/sendRequest.jpd due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
java.rmi.RemoteException: ; nested exception is:
     HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target

Dear All,I am getting this error while connecting to ASDM Please help.Your ASA Image has a version number 8.2.1 which is not supported by ASDM 6.1(3)Show Version.....User Access VerificationPassword:
Type help or '?' for a list of available commands.
ASA-PT> en
Password:ASA-PT# show verCisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 6.1(3)Compiled on Tue 05-May-09 22:45 by builders
System image file is "disk0:/asa821-k8.bin"
Config file at boot was "startup-config"ASA-PT up 12 days 0 hoursHardware:   ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KBEncryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Ext: GigabitEthernet0/0 : address is 0024.14d2.1582, irq 9
1: Ext: GigabitEthernet0/1 : address is 0024.14d2.1583, irq 9
2: Ext: GigabitEthernet0/2 : address is 0024.14d2.1584, irq 9
3: Ext: GigabitEthernet0/3 : address is 0024.14d2.1585, irq 9
4: Ext: Management0/0       : address is 0024.14d2.1581, irq 11
5: Int: Internal-Data0/0    : address is 0000.0001.0002, irq 11
6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5
<--- More --->ThanksTabrez
Hi Tabrez,
ASA5520 version 8.2.1 is supported with ASDM 6.2(1 and above). Recommended: 6.2(3).check out the below link hope that c;ear out your query !!
http://www.cisco.com/en/US/docs/security/asa/compatibility/asamatrx.html
If helpful do rate the post
Ganesh.H

Software update error while connecting to internet

Similar Messages

Maybe you are looking for