Software update for iPhoto not working

Hi Software update tells me that iPhoto and GarageBand have updates available. The version number on my OS Mountain Lion are older than what is shown in update. But when I try to do an update it tells me that the software is already installed and to go to the apple menu to update software. But that only brings me back to the app store update window, right back where I started.
How do I get these apps updated?
Thanks
Steve...

Download them from Apple page if you purchased it in a disc > http://www.apple.com/support
If you purchased it in App Store, delete them, open App Store > Purchases and download them

Similar Messages

  • Hard Drive warning when upgrading to Mountain Lion. 2 try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

    Hard Drive warning when upgrading to Mountain Lion. 2nd try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

    Yes.
    Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.
    When you see a white screen with an Apple logo in the middle, you can release the keys.
    Click Disk Utility, and then click Continue.
    In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
    Click First Aid.
    If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
    Click Repair Disk.
    If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done.
    Otherwise, you may need to do one of the following steps.
    If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.
    If you continue to have problems with your disk, it may be physically damaged and need to be replaced

  • App store, Safari, software updates, icloud, do not work in Mavericks 10.9 using a proxy server

    App store, Safari, software updates, icloud, do not work in Mavericks 10.9. these problems are interrelated I am sure. Apple apps were working fine in 10.8.5 I could do software updates through a proxy server using password authentication. I reinstalled a new system 10.9 on another partition and it won't let me use Safari or update software using a proxy server. Firefox works fine (I am using it to post). I am very disappointed that this wasn not fully tested BEFORE releasing Mavericks. Any solutions would be greatly appreciated.

    I had this problem myself.
    Checked the system log with Console, and I found the entry:-
    Nov 11 11:16:41 teds-new-mac.ad.mycompany.co.uk ocspd[537]: Authentication challenge received for "10.203.39.212:8080", unable to obtain proxy server credential from System keychain.
    For some unknown reason, Mavericks seems to be looking in the System keychain, when these credentials are actually held in the Login keychain.
    So, I tried "Copy & Paste"  - copying the https user name & password from the Login keychain and pasting into the System keychain, which worked but it's not quite as straightforward as I initially thought.
    Pasting into the System Keychain was, I found a not-very-intuitive process:
    Having opened your Login Keychain, click once on the item to be copied and when it's highlighted, select "Copy" from the Edit menu or, of course, cmd+c.
    Select the System Keychain:- DO NOT CLICK THE PADLOCK IN THE TOP LEFT TO UNLOCK IT.
    From the Edit menu, select "Paste" or cmd+v.
    You will then get a dialogue box,, enter your administrator's password and select "Modify Keychain" or just hit return, as it's the default entry.
    I found a restart was in order before it recognised everything and would accept https pages without alert boxes, but YMMV.
    Funnily enough - and this is where it seems counter-intuitive, if you do click on the padlock and unlock the System Keychain, "Paste" is greyed out in the Edit menu and cmd+v has no effect.
    Exactly the opposite to what I'd expect..

  • After doing a software update for iPhoto, some of the photos in my library appear distorted and stretched. I have tried repairing the library but they are still distorted. Has anyone else experienced this and found a solution?

    After doing a software update for iPhoto, some of the photos in my library appear distorted and stretched. I have tried repairing the library, rebuliding and repairing the thumbnails but they are still distorted. Has anyone else experienced this and found a solution?

    What upgrade did you apply?  As a test launch iPhoto with the Option key held down and create a new, test library.  Import some photos and test to see if the same problem persists. Does it?
    OT

  • Software updates for Iphoto, Safari that work with Mountain lion

    Will completing the Software updates for Safarem Iwork, Iphoto, Imovie, create problems if I have not updated my Os from Lion to Mountain Lion

    No, software update will only offer you updates relevant to your current OS, which for you is 10.7
    This is always the case whatever OS you are running. For example, if you have a really old OS no software updates will be offered at all, because there will be none.

  • Apple software update and safari not working

    Apple software update says "could not connect verify a connection with the app store". Safari wont even display google. Both apps open up initially.
    <Edited By Host>

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Click the Clear Display icon in the toolbar. Try the action that you're having trouble with again. Post any messages that appear in the Console window – the text, please, not a screenshot.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into a message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Software update 6500, device not working anymore!!...

    Hello,
    Brought the mobile (6500 slide) yesterday and today its with local dealer for repair.. whats wrong with Nokia software update application!!!!!!
    following error pop up during the application launch,
    Error #1
    nsl_host_process.exe - Application Error
    The instruction at "0x00e17510" referenced memory at "0x0001c004". The memory could not be "written".
    Click on OK to terminate the program
    Click on CANCEL to debug the program
    OK Cancel
    Error #2
    NOKIA service layer host process has encountered a problem and need to close..
    application restarted many time and error repeats, once it didn't pop up and error and i started to update the mobile..
    during the update windows pop up with found new hardware and there you go,.. previous errors are back and the mobile doesn't respond anymore,...
    Operating system Windows XP, and matching all the configuration requirements according to Nokia,
    anyone had a remedy for this??? does anyone ever did firmware upgrade nokia 6500 using software update application??
    thanks
    Deskey

    Its solved. i guess it was all related to Windows Problem or anti virus Problem.
    XP re installed and the software works just fine..however the mobile is already with the local dealer for update the firmware. will do it again once it back on my hand!!!.
    thanks for your sympathy though!
    Desky.

  • Just upgraded to 10.4.7 by Software Update - Avid dongle not working

    I upgraded as I always do thru the Software Update - so it's the combo. Never really had problems like this before.
    I had to reboot many times to get the desktop to come up - ran disk utilitly and fixed permissions and disk - no many errors. All fixed.
    But can't run Avid Xpress pro - Avid says its a dongle combatability issue and is working on it.
    I am asking here because I am lookin for other ideas - and I know there are many people with problems right now. I haven't used very many applications yet because of the holidays.
    Someone already tried to go back to 10.4.6 with no luck.
    Any suggestions.
    PowerMac G4 Dual and PB G4 17'   Mac OS X (10.4.7)  

    FYI - there has been an unofficial fix that works -
    download the driver for the dongle.
    http://sonicstudio.com/releases/SentinelDriver10.zip
    It works.
    i am on 10.4.7 and was freaked when it didnt work but this driver did the trick
    thakyou

  • Software Update Right Now Not Working!

    I know there is a Software Update right now, its Update 1 for Java for OS X Lion updating java to SE6 to 1.6.0_29
    So I run Software Update on my Mac and it advises all software up to date!
    I checked the version of Java I have, its the old version.
    So what is going on, is there a problem with the Software Update software on my Mac, why dosen't the update show up on my Mac, it has done for the past three years so why not now.
    Or is it something which is being rolled out around the world to stagger the strain on servers, they never did this before?
    Or should I just update direct from the Apple Update page?
    Thanks
    Phil

    Apple did some maintenance, maybe it has influenced the Software Update as well.
    You can, of course download the installer from Apple Downloads and install it http://support.apple.com/kb/DL1421
    I updated yesterday without problems using Software Update.
    Stefan

  • Can't get Software Update for 755p to work

    I've followed the directions explicitly but at the point where I point the memory card into the Treo for the update it doesn't work.  How does the software update (1.08) get onto the memory card?  Do I download it onto my computer, double-click the zip file and copy it all into the PALM folder on my Mac?
    here's the site I'm using:
    http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,kb=PalmSupportKB,t=ooccase,case=obj(9156) 
    Thank you for your help. 
    Post relates to: Treo 755p (Verizon)

    Hi Alan,
    Yes, I reformatted/erased the card.
    I'm wondering if there is a snag in how I need to get the downloaded new softeware from my computer to the card.  I have tried both dragging the zip file directly into the Palm folder and, opening it first and then dragging all items in.
    thank you for your help.
    Mark 
    Post relates to: Treo 755p (Verizon)

  • TS1702 How can i load sibeluis scorch ,because since the software update it will not work any more, before it worked well ?

    How can i load sibelius scorch, before the software update it worked well,now it will not work, even re down loading it will not hold, please help?

    That would appear to be a Mac program, so posting here in the iTunes Store forum isn't likely to get you any useful advice. If this support article from Sibelius doesn't help:
    http://avid.force.com/pkb/articles/en_US/FAQ/en362435
    I'd suggest asking in the Sibelius forums or contacting Avid/Sibelius support.
    Regards.

  • Updated to 10.6.8 software update and itunes not working

    I recently upgraded to 10.6.3, then installed the 10.6.8. I have tried using the software update and it tells me that my network is not available, but when I when the check it says everything is fine. I have tried to connect to the Mac App store & Itunes and it gives me the same error message. Any ideas???

    Did you use the Combo update.   This is the route to go; then software update (about seven of them).
    Mac OS X 10.6.8 Update Combo v1.1

  • Updates for apps not working

    ive got an iPhone 4s. Tons of apps installed
    Yesterday I had an update for an app. A red 1 appearing on the App Store icon. Went to update the app and instead it opened the app instead of updating it !
    Now I've got 3 updates. I go to update the app and same thing. Friends on a forum I post on are having the same issue
    How come I can't update my apps ??  Never had this before.

    I got an iPhone 4s and I'm experiencing the same problems.  I used facebook messenger, and used to get the push notifications to that app, but now that i've deleted it I no longer get the messages directly to the facebook app.
    I have push on in the mail settings and notification center for facebook are on as well.  I also have push notifications on in the settings for facebook.
    I've tried deleting the app and reinstalling, no fix.  I haven't tried a hard reset yet.
    So far, I figured out that it's not iOS or the facebook app, somehow it is a problem with my account.  I logged into my wife's account on my iphone and her account is able to recieve push notifications to my iphone.
    Any thoughts?

  • Software Update web page not working

    For several days I can't access the "device software update" web page. I click on Get Started with the intention to download the NSU but the page is contentless.
    Is anyone experiencing such an issue? Any suggestions?
    Solved!
    Go to Solution.

    Hi pepelyankov
    There is no problem at time of post with download here:
    http://europe.nokia.com/A4579163
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • TA24326 How to tell if Software Update for Windows is working correctly when no updates are available  --- the link is not working correctly.

    The link in the article does not go to the answer. It goes to a generic apple site.

    Well, the article is archived meaning it is no longer valid for the current version of iTunes.
    If you want the current version of iTunes... go to apple.com/itunes/download.

Maybe you are looking for

  • My new (8/2012) iPod Touch: voice control suddenly activates on its own. Is there a reason for this and how do you get it to stop?

    For reasons unknown to me, my brand new ipod touch keeps activating Voice Control. I am not pressing the home button or touching any controls. I can be doing nothing with it and it just kicks on, sometimes interrupting what is already going on (like

  • Help!!!Urgent!!! Please!!! Installing CS5.5 master collection programs

    I downloaded CS5.5 master collection but didn't install all the programs. What happened to the ones I didn't install? Where can I find them? Can I install them later? Do I have to download the whole collection again? Where is the installer for the re

  • Parameter reports

    HI In report builder am creating paramters.for that i have taken EMP table from Scott user in deptnum am displaying distinct deptno.if i select dept 10 ,empnum drop down should display empno's of deptno 10..if i select dept 20, empnum drop down shoul

  • Removing items in my startupitems folder

    My own account login items list in my systems preferences window is limited to one item- an istat menus helper app. But my mac hd/library/StartupItems folder contains two items that I don't recognize and don't think have much to do with starting up t

  • How this works - how do you use it

    I am confused if you sign up for 3g does it operate when you have wifi available or do you have to turn it on and off. How much useage can you get for 2gb a month. How do others use it as a at their work.