Software update freeze on the system update
quicktime, iTunes, etc. updates worked okay if I restart one at a time....... but I tried repeatedly to get the 10.5.5 system update and it freezes every time. Is there a workaround????
Thanks for the feedback. Good computing.
Similar Messages
-
My iPad Air crashed after updating latest iOS software. After resetting the system, Pages, Numbers and Keynotes are not available. How do I get the apps back into my iPad?
You can also re-download the apps.
App Store>Purchased>Re-download apps -
My HP Pavilion a6357c with Windows Vista 32-bit freezes until the system warms up
Any time I start the computer up when it hasn't been used, the system fails to boot. It will freeze up in the process where I have to hold the "ON" button down to shut it down and then attempt to reboot. the system will freeze just about anywhere in the process. Sometimes I get to log in with my user name, and then the screen will freeze up. Sometimes trigger a blue screen, sometimes a black screen and then perform a hard disc diagnostic routine. Once whatever component warms up, the system works great.
I am not that familiar anymore with troubleshooting Windows XP, but way back in the day I seem to recall that the Windows recovery console would be used to fix issues like the one you're describing. It sounds like you may have a corrupted boot sector if it keeps going into the windows recovery mode. The solution could be as simple as using the last known good configuration or possibly doing a system restore. You may want to try this link on Technet that explains the recovery console and the tools available in it like fixmbr..
http://technet.microsoft.com/en-us/library/bb457126.aspx
Worst case you may be looking at doing a reinstall of windows XP.
I am an employee of HP -
My office software word disappeared from the system
My Macbook Pro suffered improper handling and disappeared from the system software office word, I know how to retrieve and install it again.
Atte.
lhguerragYou need to reinstall it from the source it was initially installed from.
(65227) -
Case in point: I can not use Xp any longer since it is not supported by microsoft, and latest lan driver requires xp service packs which are no longer available for XP or Vista. So my old software as of April 2014 is now worthless as internet access software(microsoft
will not provide support or service packs for xp). So I get a new pc with WIN7 op system installed and try to do traditional backups to protect myself should my system crash in the future. (usually this means cloning a hard drive or installing Faronics Deep
Freeze to protect my op system in case of catastrophic failure.) I try to install and use some of these utility software types including Acronis Disk Director 12, Avanquest Perfect Image, Partition Commander 10, and others True Image Hdd utility for cloning
hdds. Most of these I try to run turn out to be useless, and I get pop-up messages saying my software is incompatible with win 7 op sys! I am wondering if it is the software or the fact the op system is 64bit (not 32 bit) which means that if you buy any other
software to help with utilities it will be worthless because most are written for 32 bit systems not 64. No one tells you these warning signs when you buy the pc with the 64 bit software already installed. But for a Toshiba 15" computer that normally
costs 400$ and I can get it at Goodwill used computer store(1stStreet and Fairview in Santa Ana, Ca.) for 175$ I can not complain. Being an unemployed electronic technician, I have to stretch my dollars as far as they will go...Another frustrating thing is
I buy this device made by Apricorn Driveware that allows users to hookup a second hdd using a usb cable and a three connector module that will allow the user to connect any hard drive sata or ide or the 3rd type. I try to run it and make a backup copy of internal
hdd but I get error messages saying it can not copy hdds when there are minor differences such as total mbs on each drive or slightly different hardware issues such as my pc has 580 gb internal drive and replacement backup drive is 380gb. Such as shame because
hardware setup is a good idea but without compatible software it is useless! Perhaps if I was using it on my old xp op systems I would have fewer problems with software compatibility issues. I really hate the fact that MS does not provide support for known
good op systems like xp say 20yrs? When the products and markets change so fast they run the risk of alienating customers who can not financially keep up with technology changes especially during an economic depression such as the one we are in now( they predict
it will last 20 yrs). a curious thing about the Acronis disk director 12 software I installed. It seemed I could not get partion size on hdd to change no matter what I did. I found out that if I CHANGED THE DATA BLOCK SIZE ON THE NTFS PARTITION FROM 4 KB TO
2 KB THAT I WAS NO LONGER LIMITED BY THE SOFTWARE FROM SHRINKING THE HDD PARTITION FROM 300GB DOWN TO 100GB. Once this item was changed on the hard drives the Disk Director 12 software (Acronis) was able to shrink the partition size to what I wanted.Due to phenomenal development in Windows, Microsoft released 4 generations of operating systems, succeeding Windows XP. Hence, on various aspects, Windows XP becomes too old to be used practically these days. So the support was pulled out.
I do agree that Windows XP is the most successful operating system ever, so far. But, later versions added more features, enhanced security and compatibility. Moreover, at this point, Windows XP becomes more vulnerable, although security patches are made.
Ultimately, we need to move to a more secure, feature-rich and highly compatible operating system.
With improved features in newer versions of Windows, the NTFS filesystem has also been improved, adding new features. Hence, certain feaures that are not availble in Windows XP are available in Windows 7, again, in Windows 8.1. So is the disk management
features.
As for Acronis Disk Director, it's a third party software and hence we can't comment on the features/its working.
Balaji Kundalam -
System Preferences, Software Update, Leopard Freezes
Hey,
I got Leopard 10.5.5, and have kept it pretty up to date through my use of it. However, recently, I've started to experience some problems. First, I noticed that I couldn't open system preferences. On the dock, the white ball is displayed under it, showing that its running, but no window pops up. Furthermore, I can't quit it, and Force quit won't work either. I've tried opening system preferences from a variety of ways, including spotlight, finder, trying to change the desktop background, etc. None of these seemed to work, and just freeze up the system. I've tried to restart, reset, and update the system to see if that was the problem. However, the software update program also freezes up, and won't force quit either. Any suggestions before I try to reinstall Leopard completely?No, I've been debating getting a hard drive for the past year, but keep waiting for the prices to lower so I can get a better one. Guess what I'm getting myself for christmas. What do you mean an archive and install? I'm not really sure how to completely install and all. I think I may just put all my documents and files on an external. Completely swipe the drive. And Restart. I need to fix my windows partition too, because I have to use a lot more space than I expected due to school work (engineering is not fun on macs). This break is not going to be fun. If I'm under warranty still, can I take it to the store and can they do this for me? Thanks
-
I have a 5-year-old laptop, given to me by someone else as a gift, that uses: a 32-bit operating system, Windows 7 (with Service Pack 1), and Internet Explorer 8. A system message told me I need to upgrade Adobe and Silverlight. I accomplished the Adobe upgrade without problem. For the Silverlight upgrade, the instructions say to first uninstall the existing Silverlight software before installing the updated software. However, in the System Requirements, for Windows, it says the phrase that I quoted in the "Question" box above. I am not sure what it means. I am confused by the words "for IE only"; I'm assuming IE means Internet Explorer, but I don't know what this short phrase is trying to say. Is the "bottom line" that my 32-bit operating system is insufficient to receive the Silverlight upgrade, or is it enough? I need to know. I don't want to uninstall my existing Silverlight software yet, because of the possibility that I can't install the new software; I don't know what adverse effect would occur if my laptop doesn't have any Silverlight working on it at all. So I'd appreciate being filled in on this. Thanks!
Your computer can run silverlight just fine. They are just saying that Silverlight is a 32bit application, except for Internet Explorer, where it can run as 64bit. It doesn't make any difference for you, so just go ahead and install it.
-
ITunes Library wiped out after software update - Pls help !
I set my iMac periodically runs auto software update, and after I run iTunes 6.0.5 (20) software update, I opened iTunes and a warning message says, "Files moved to iTunes Library Damaged 1", and the library is empty !!
On further search, when I go into HD, a folder "iTunes Library" seem to have those previous songs. Looking thru the files, it seems as though they are all the songs I lost. Can I load these songs back to the iTunes Library, which is empty right now? Or are these damaged files?
FYI - I previously had iLife'05, but thru periodic software updates, iTunes is now version 6.0.5 (20). Is this compatible with the specs of my mac?
Kind of mad, b/c I literally just purchased songs and did not back them up....
Any help or advice is welcome.
Thanks!The first tip is to turn off the auto update features. The Mac OS will still go look but will ask you if you wnat to install. It is usually a good idea to wait a week or so after an update see what problems others are having.
You tunes files are ok - it is the "iTunes Library" and the "iTunes Music ....xml" that are damaged. These are data base files that work with iTunes and other programs so they know where to go look if a program needs to use something in iTunes.
When you open iTunes the 2 noted files above will be located in HD>User>Music>iTunes. you can just "add" the tunes back into the library and it should be ok. Note that you will lose your old info such as "date added" etc.
You can go to the Apple Store online and select the Apple Software option to see the system requirements for iLife06.
MJ -
I can't install software update 10.5.7. Help!!
I checked the software update download the MAC OS X 10.5.7, when the software update said that the new software requires to restart the system, I pressed the "restart" button, then when it "restart" there's this window that said installing 1 item [on the top] and on the very bottom, its says "configuring installation". I thought its just normal so I left it like that. After 2 hours, it isn't finished yet and I can't wait anymore longer because I have something to do so I just shut down and open my macbook. Then i searched youtube about the update, i watched a video that says it only takes 5-7 minutes so I think there's a problem.
Please Help!Read Mac OS X 10.5: Software Update stops responding during "Configuring installation" & follow the advice given.
-
Software Updates not available without CC
I have a two month old Mac mini with OS 10.8.3. App Store shows updates for Server, iPhoto, and iMovie, but they all require a credit card. All these software items came with the system out of the box. I have never bought any software from Apple for it. How can I install updates without a credit card?
To see what I am faced with:
http://www.flickr.com/photos/36589940@N04/8966109940/sizes/k/
Notice there is no option for "None" to get past this choice. It's either PayPal or a credit card.This is the info that I asked about in your first post about this issue so that I could understand what you were facing;
https://discussions.apple.com/message/22177616
First off; with the iLife apps; iPhoto, iMovie and GarageBand, did you accept them into your Mac App Store Apple ID when you first set up your new Mac? If not, have you used any of the three apps? If you didn't accept them into your account and you used any of them, they can not be updated as per the Terms of Use for these apps.
As for the Server software, if your account does not offer the None option, then you will need to supply a bank card or redeem a small iTunes Gift Card to progress any further with your account.
If you wish "official" confirmation, check with the respective stores for your account;
iTunes Support -
http://www.apple.com/support/itunes/
Mac App Store Support -
http://www.apple.com/support/mac/app-store/ -
Primusrun crashes the system on exit
Hi there im using bumblebee on my laptop for the optimus support.
When i run any graphical application through bumblcee it crashes the whole system when i exit it.
for example:
$primusrun glxgears
It works and diplays it, but when i press ESC to exit, it freezes, crashes the system.
These are the logs from the crash.
Thnx for the help
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.744022] [ERROR][XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: P
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.744013] [ERROR][XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.744001] [WARN][XORG] (WW) Warning, couldn't open module mouse
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743990] [WARN][XORG] (WW) NVIDIA(0): Unable to get display device for DPI computation
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743978] [WARN][XORG] (WW) Unresolved symbol: fbGetGCPrivateKey
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743968] [ERROR][XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743962] [WARN][XORG] (WW) Warning, couldn't open module mouse
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743954] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or d
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743949] [ERROR][XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: P
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743943] [ERROR][XORG] (EE) systemd-logind: failed to get session: PID 4783 does not b
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743925] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/7
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743897] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/1
ago 24 01:17:58 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
ago 24 01:17:54 Archpire kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.32 Tue Aug 5 20:58:26 PDT 2014
ago 24 01:17:54 Archpire kernel: [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
ago 24 01:17:54 Archpire slim[257]: xf86: found device 1
ago 24 01:17:54 Archpire slim[257]: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
ago 24 01:17:54 Archpire kernel: vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
ago 24 01:17:53 Archpire kernel: bbswitch: enabling discrete graphicsHi!! take a look and see if you have this version of packets:
intel-dri-10.2.6-1-x86_64.pkg.tar.xz
lib32-intel-dri-10.2.6-1-x86_64.pkg.tar.xz
lib32-mesa-10.2.6-1-x86_64.pkg.tar.xz
lib32-mesa-libgl-10.2.6-1-x86_64.pkg.tar.xz
mesa-10.2.6-1-x86_64.pkg.tar.xz
mesa-libgl-10.2.6-1-x86_64.pkg.tar.xz
I had the same issue since they were updated.
Now I have downloaded to version 10.2.5-1 and solved the problem.
Let me know
Sorry about my english... -
i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!
I have exactly the same problem.
I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
What the **** Is The Microsoft Deal with all of this!?!?
PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
If anyone has a link, it would be appreciated.
Message was edited by: nostrawaggus -
While upgrading the system hanged
I was prompted to upgrade & the software downloaded, but while starting the system hangs up
after the software upgrade was installed the system was booting up and it crashed
Now when I try to start the system it asks for the password and after entering the password the systems seems to start but halfway through the process, the laptop shuts down on its own -
Last software update of OS X Lion: the system freezes before the end.
I was doing the last update of OS X Lion on a MacBook Pro (10.7.3). Before the end of the process, the system freezed. The only solution was the off button of the desktop. But after it was impossible to open it again. I had to restore OS X from the Time Machine backup. Can you help me? What is the problem? What do I have to do?
Just fixed this myself.
SWUPD is expecting a directory within the one you chose, called "html".
Example: /Volumes/XSAN/SWUPD/html
It will not create "html" if the directory doesn't exist.
Create the folder "html" then in terminal do this:
sudo chown -R _softwareupdate:_softwareupdate /path/to/the/folder
Example: sudo chown -R _softwareupdate:_softwareupate /Volumes/XSAN/SWUPD
##do not include/html. the -R means recursive and forces the same ownership on all contained directories. -
System freezes after the 10.9.3 update
Hello
New MacBook Pro, 15", 2.3 GHz, 16GB RAM, 1TB SSD
After the update to 10.9.3, the system hangs several times a day. Sometimes the freeze continues for about a minute and then the machine gets back to normal, sometimes it does not - then only hard reboot solves it. Are there any similar experiences out there? Any idea for possible causes?
Thank you
BorisAnd this is the system report - at it's "normal" state. Obviously I'll not be able to run the EntreCheck when the thing freezes...
EtreCheck version: 1.9.11 (43) - report generated May 22, 2014 at 4:59:05 PM GMT+3
Hardware Information:
MacBook Pro (Retina, 15-inch, Late 2013)
MacBook Pro - model: MacBookPro11,3
1 2.3 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information:
Intel Iris Pro - VRAM: (null)
NVIDIA GeForce GT 750M - VRAM: 2048 MB
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 4:9:12
Disk Information:
APPLE SSD SM1024F disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 899.7 GB (493.45 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
Windows 7 Pro (disk0s4) /Volumes/Windows 7 Pro: 100 GB (22.99 GB free)
USB Information:
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Anywhere
Kernel Extensions:
[kext loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
[kext loaded] com.aladdin.kext.aksfridge (1.0.2) Support
[kext loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) Support
[not loaded] com.devguru.driver.SamsungACMControl (1.4.14 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.14 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungComposite (1.4.14 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.14 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.14 - SDK 10.6) Support
[not loaded] com.driver.JRDMassStorageDriver64 (1.0.0) Support
[not loaded] com.driver.JRDMassStorageDriverType05 (1.0.0) Support
[not loaded] com.driver.JRDUSBModemData32 (1.0.1) Support
[not loaded] com.driver.JRDUSBModemData64 (4.0.8) Support
[not loaded] com.focusrite.driver.usb.audio (2.6) Support
[not loaded] com.focusrite.driver.usb2audio (1.2) Support
[not loaded] com.paceap.kext.pacesupport.leopard (5.8 - SDK 10.4) Support
[not loaded] com.paceap.kext.pacesupport.master (5.8) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.8 - SDK 10.3) Support
[kext loaded] com.paceap.kext.pacesupport.snowleopard (5.8 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.8 - SDK 10.4) Support
[kext loaded] com.senstic.driver.PocketAudioDevice (1.2 - SDK 10.6) Support
[kext loaded] com.senstic.driver.PocketCamDevice (1.0.0 - SDK 10.7) Support
[not loaded] com.senstic.driver.PocketCamDevice.UserClient (1.0.0 - SDK 10.7) Support
[not loaded] de.rme-audio.driver.RMEFirefaceUSB (1.94 - SDK 10.8) Support
[kext loaded] org.virtualbox.kext.VBoxDrv (4.2.18) Support
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.2.18) Support
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.2.18) Support
[kext loaded] org.virtualbox.kext.VBoxUSB (4.2.18) Support
Startup Items:
PACESupport: Path: /Library/StartupItems/PACESupport
VirtualBox: Path: /Library/StartupItems/VirtualBox
Problem System Launch Agents:
[loaded] com.paragon.NTFS.trial.plist Support
[loaded] com.paragon.NTFS.upd.plist Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[running] com.aladdin.aksusbd.plist Support
[running] com.aladdin.hasplmd.plist Support
[failed] com.avira.antivirus.dbcleaner.plist Support
[loaded] com.avira.antivirus.ipm.loader.plist Support
[running] com.avira.helper.watchdox.plist Support
[loaded] com.barebones.authd.plist Support
[not loaded] com.barebones.textwrangler.plist Support
[running] com.crashplan.engine.plist Support
[loaded] com.google.keystone.daemon.plist Support
[not loaded] com.gopro.stereomodestatus.plist Support
[failed] com.micromat.TechToolProDaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.paceap.eden.licensed.plist Support
[running] com.parallels.mobile.dispatcher.launchdaemon.plist Support
[loaded] com.parallels.mobile.kextloader.launchdaemon.plist Support
[loaded] com.prosofteng.DriveGenius.locum.plist Support
[running] com.senstic.DPA.PocketCamAssistant.plist Support
[loaded] com.senstic.PocketCam.DriverReloader.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
[not loaded] com.winzip.WinZip-Mac.plist Support
[running] com.xrite.device.xrdd.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
[not loaded] org.macports.rsyncd.plist Support
[loaded] PACESupport.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[running] com.amazon.sendtokindle.launcher.plist Support
[loaded] com.avira.antivirus.ipm.ui.plist Support
[loaded] com.avira.antivirus.notifications.agent.plist Support
[loaded] com.avira.antivirus.odscan.default.plist Support
[loaded] com.avira.antivirus.scheduler.agent.plist Support
[running] com.avira.antivirus.systray.plist Support
[loaded] com.avira.antivirus.telemetry.agent.plist Support
[loaded] com.avira.antivirus.update.default.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.google.keystone.agent.plist Support
[failed] com.micromat.TechToolProAgent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[loaded] com.parallels.mobile.prl_deskctl_agent.launchagent.plist Support
[loaded] com.parallels.mobile.startgui.launchagent.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
[loaded] com.xrite.device.softwareupdate.plist Support
[running] de.rme-audio.RMEfirefaceUSBAgent.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.adobe.ARM.[...].plist Support
[running] com.akamai.client.plist Support
[running] com.akamai.single-user-client.plist Support
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[failed] com.codecm.uploader.plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.parallels.mobile.startgui.launchagent.plist Support
[not loaded] com.spotify.webhelper.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
User Login Items:
CrashPlan
Mail
Calendar
Messages
CrashPlan menu bar
Notes
Data_wd_3gb
Internet Plug-ins:
o1dbrowserplugin: Version: 5.4.1.18709 Support
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
OVSHelper: Version: 1.1 Support
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
DivX Web Player: Version: 3.2.0.788 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.4.1.18709 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 55 Check version
Safari Extensions:
Open in Internet Explorer: Version: 1.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
InstantOn: Version: 7.1.2 - SDK 10.8 Support
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
BlueStacks Install Detector: Version: Unknown
Picasa: Version: 1.0 Support
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes:
Akamai NetSession Preferences Support
Flash Player Support
Flip4Mac WMV Support
FUSE for OS X (OSXFUSE) Support
Java Support
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 837.91 GB Disk used: 378.34 GB
Destinations:
TimeMachine_wd_3gb [Network] (Last used)
Total size: 3
Total number of backups: 2
Oldest backup: 2014-05-22 06:57:28 +0000
Last backup: 2014-05-22 09:40:04 +0000
Size of backup disk: Excellent
Backup size 3 > (Disk size 837.91 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
5% Finder
3% WindowServer
2% com.apple.iCloudHelper
1% hidd
1% fontd
Top Processes by Memory:
426 MB Safari
426 MB WindowServer
295 MB savapi
246 MB CrashPlan
229 MB Dock
Virtual Memory Information:
4.62 GB Free RAM
5.56 GB Active RAM
4.30 GB Inactive RAM
1.52 GB Wired RAM
1.54 GB Page-ins
0 B Page-outs
Maybe you are looking for
-
Windows 8.1 Bootcamp wont Sleep or adjust Brightness
Hey Guys, I installed windows 8.1 via bootcamp onto my 2013 rMBP, 16gig Ram, Upgraded Processor, and I have two issues with it. 1. I cannot adjust my screen brightness, which is manageable but annoying. 2. It wont go to sleep. There isnt an option an
-
Extractor for Material Characteristics - Variants
Hello Gurus, There are few characteristics that we have configured in ECC system for Materila. If you go to MM01 or MM03-> BASIC DATA 2 -> Client Specific configuration -> There is an option of creating a Cross-Plant CM. You can create additional cha
-
R12 Install Error: how to check stage area by MD5SUM / dos2unix
Hi, I am facing R 12 Install Error at Stage 3 to 5 at 92%... Windows Xp SP3 I have searched alot through this forum and resolved most of erros but for this error i found Hussein Sawwan always telling other users to run md5sum checksum for stage area
-
Accessing properties of some other iView through PAR
Hello Everybody! Can anybody tell me how to access properties of other iViews in my PAR code? Suppose i have created a PAR file and i want to access some properties of an iView which are made out of some other PAR or may be out of the box. I want to
-
Hi, My query is at a Calmonth level but I have to do the calculations at the Calday level. OverTime = Actual Hours - Planned Hours I have Cal Day in my MultiProvider. How can I use Before Aggregation in the query so that I can achieve the calculation