Software update from OS X 10.6.8?

I have a MacBook (model 7,1) operating OS X 10.6.8. Is it possible to upgrade to a later operating system? When I check for software updates I am advised there is no update available. I have recently purchased a Garmin Vivofit and when I try and load on the software to sync with the Mac it fails as the software is incompatible. I know my Mac is quite old, but thought I could update the software rather than having to buy a new one. Any suggestions would be appreciated!!

Back up your data, check your applications for compatibility, and download Yosemite from the Mac App Store.
(120664)

Similar Messages

I'm running os 10.5.8 and want to upgrade to new mountain lion but need to first upgrade to 10.6.8. I downloaded that but got message saying i needed 10.6 first, which I can't seem to find anywhere. When i try Software Update from the apple menu, it says

Help! I want to upgrade to the new Mountain Lion OS but first need to upgrade rto 10.6.8. I'm currenty running 10.5.8. When i try the Software update from my desktop apple menu, it says i already have the most redent software. I tried downloading 10.6.8 but when i tried to run it said i first need 10.6, which i can't seem to find anywhere on the Apple site or internet. Any suggestions? Can i somehow not upgrade form 10.5.8 to 10.6 or higher?
Thanks.

Get this from Amazon before the prices really get out of control!
OS X 10.6.3
http://www.amazon.com/Mac-version-10-6-3-Snow-Leopard/dp/B001AMHWP8/ref=sr_1_1?s =software&ie=UTF8&qid=1343250995&sr=1-1&keywords=OS+X+Snow+Leopard
OR
OS X 10.6.0
http://www.amazon.com/Mac-OS-Snow-Leopard-10-6/dp/B002KG02QO/ref=sr_1_2?s=softwa re&ie=UTF8&qid=1343250995&sr=1-2&keywords=OS+X+Snow+Leopard

HT1349 How do I delete a notification of a Software Update from a 3G Iphone. It shows up in my General Settings.

How do I delete a notification of a Software Update from a 3G IPhone. It shows up in my General Settings and I do not know how to delete it. It is for the 3Gs IPHone.

What she said. And it's recommended you do the updates. Especially for that old beast.

Are RHEL packages downloaded in software update from RHN

We have RHEL 5 in our setup. I have 1 conceptual query with regard to software update from Red Hat Network (RHN), are the missing pages or updated packages downloaded in software update from RHN? Also, is a .repo file need to be created in /etc/yum.repos.d.
I hope my query is clear that are the RHEL packages downloaded in software update from RHN.
Please revert with the reply to my query.
Regards

975148 wrote:
We have RHEL 5 in our setup. I have 1 conceptual query with regard to software update from Red Hat Network (RHN), are the missing pages or updated packages downloaded in software update from RHN? Also, is a .repo file need to be created in /etc/yum.repos.d.
I hope my query is clear that are the RHEL packages downloaded in software update from RHN.
Please revert with the reply to my query.
Regards
I suggest you go ask RedHat your question.
It is their product, not Oracle's product.
Go get your answer directly from the company that created that OS distro.

My iPhoto on mac is not opening and its saying please upgrade your os to 10.7.2 .... but my os is latest ..... i even tries software update from apple menu .... please help

i upgraded my os to the latest lion os on 39th NOV . But unfortunately i had to reinstall the os back ( A big story ) .
so i reinstalled and brought it back to 10.7.1
Now when i try to open iphoto it says i need os > 10.7.2
every other ilife apps are opening .
please help
i even tried software update from apple menu but it says my os is up to date

The current version of the OS is 10.7.2.
Regards
TD

Client not receiving the software update FROM SCCM 2012 R2

We have SCCM 2012 R2 installed and configured for SUP.and i have synchonice the SUP with WSUS server in the same which is there in the same machine.
Now i can able to deploy the software update from SCCM 2012 R2 without any erro to the windows 7clients, but client side when i check there is no update installed in the clients , but seems there is no error in the client logs

Hi,
I'd start with running a "Software Updates Scan Cycle" from the configuration manager control panel applet and check the log file Windowsupdate.log, WUAhandler.log.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Point a client to get software updates from the local OS X Server

I have an OS X Server that's serving only clients as a File Share device that I would like to use for Software Updates. There are three Mac Clients and a bunch of iOS clients. How do I use Software updates from the Server? I read the instructions on configuration but have the following questions:
Where do I find the correct port and catalog file name?
The instruction specify a port of 8088 and a catalog of 'index.sucatalog" in the example. Is this always the case?
I can write to the .plist specified but cannot read from it (get an error). I can see that the file has been written and the data is correct. What's wrong?

Apple's Software Update Server only provides updates for Apple Mac software. It does not provide updates for Mac Applications via the AppStore nor does it provide any updates for iOS devices.
Apple's Caching Server works differently. When a Mac or iOS device on your network requests an update from either the Mac AppStore or the iOS AppStore this will then be 'cached' on the server so that next time a device requests the same update it is available locally.
The URL for a local Software Update Server would be of the form
http://server.domain.com:8088/index.sucatalog
This would be written on a client Mac as follows
sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL http://server.domain.com:8088/index.sucatalog
It would be read on a client Mac as follows
defaults read /Library/Preferences/com.apple.SoftwareUpdate CatalogURL
Note: Older versions of OS X had a version of the defaults command which did not like you including the file extension of the plist file so in the past the following would fail.
defaults read /Library/Preferences/com.apple.SoftwareUpdate.plist CatalogURL

When attempting to install "Software Update" from Apple, the process talls at "Configuring Installation". Even allowing it to run for 24 hours does not result in any progress.

When attempting to install "Software Update" from Apple, the process stalls at "Configuring Installation". Even allowing it to run for 24 hours does not result in any progress.

Thanks for the straightforward tip. I had restarted once already, but the second time was a charm. The install button now works. Don't know if it mattered, but I also repaired disk permissions and then restarted in safe mode this time.
The printer driver is apparently a different issue in itself. It turns out that the my printer, the HP Deskjet F380, has some fluke that makes it incompatible in 10.6. A new driver is coming out from HP according to Rickmeister in this thread: http://discussions.apple.com/thread.jspa?messageID=10076690&#10076690
In case anyone else has the same problem with the F380: Like the user in the aforementioned thread, I downloaded and installed the old HP drivers for 10.5, and now at least I can print in the meantime.

Nokia E71 - after software update from PC suit - p...

Nokia E71 - after software update from PC suit - problem started for GPRS connection showing "no network connection'
I am using vodafone service, also saved setting many times but it didnt work.
How to solve the problem? also wanted to know hard reset or 3 finger reset process and steps.

Menu » Tools » Settings » Connection » Access points » Options » New access point
For the reset, does this help? Because Vodafone operates in different countries with different settings, in which country do you live?

HT1222 How do I un-install iOS 6.0.1 Software Update from my iPhone 5? It is draining my battery life and has changed anything so it is unnecessary.

How do I un-install iOS 6.0.1 Software Update from my iPhone 5? It is draining my battery life and has changed anything so it is unnecessary.

jshenice wrote:
How do I un-install iOS 6.0.1 Software Update from my iPhone 5?
You can't.

How can I delete old Apple Software Updates from 10.6 server?

Hi guys!!
First of all, please, excuse my english......i know it's the worst possible and will try to develop it.
My question is the following.
The hard disk of my xServe is almost full and I need to delete the old Apple Software Udates that it contains (some of them are from 2005!!)
And I don´t know how to make it!!
I`ve uncheck the "automatically enable copied updates" option in Server Admin and I´ve check-in the "Purge unused/legacy software", but i don´t know how to delete the oldest Apple Software Updates because I don´t know where the **** are they!!
Thank's in advance from Spain.
Any help will be very wellcome
J.

You could try what
s in <http://discussions.apple.com/message.jspa?messageID=9289958#9289958>, or, as this is a new setup which isn't in use, you could just nuke the system and reinstall and this time use the correct DNS name.

24" iMac won't install any 'large' Apple software updates from the internet

I am having a serious issue with my iMac and neither the people on the phone at Apple Care or the 'Geniuses' at the Genius Bar have been able to assist. So, maybe someone here can:
First - here is the background information about what happened and what I've done:
A few weeks ago when the new iTunes 10 came out I went to upgrade. The upgrade failed it said. So, I thought perhaps Apple was having issues with the new software or something. So, I thought - Ok, I'll give it a day or two.
I come back and try again from Apple.com - no luck. Hmmmm - well, I just happened to see my 'software update' icon pop up and there was iTunes. I thought "Great! Now I'm sure it'll install!" No luck.
So, I think - well, perhaps I've done something to corrupt my profile. So, I create a new profile and try again. No dice.
So now I'm really confused and figure - ok, let me try a partition and I'll try again. Still nothing.
Finally I figure - ok, something is wrong here. So, since nothing is working I backup my music and important files and wipe out the hard drive and start over. No luck. And, in fact - since I had gone back to 10.5.4 or whatever - software updates needed to install to get me back to 10.5.5. Those wouldn't install through software updates OR when downloaded from Apple.com - Smaller downloads like, flash, java, firefox, etc - all download and install without issue.
I decided to engage "Apple Care" and they call me at the time I specified and we begin to do some tests on the hardware and everything came back ok. We tried from Apple.com and software updates again - still won't install the software. Keeps coming back with "Software installation failed" something about the package installer was corrupted during downloading.
The guy at Apple care thinks perhaps its my network corrupting something. This begins to make a little sense and I think, maybe he's right. My wireless router isn't that great so, maybe I'll just go replace it. However, while I'm checking out I begin to think that maybe its NOT my wireless router - because I do have 2 other computers in my house who haven't had issues downloading anything. So, this is unlikely. But, I didn't like the wireless router anyway - so I went ahead with the purchase.
I get it home - set it up and try again. STILL not working. So, I make an Appointment at the "Genius Bar". I take it in - show them the screen shots of the errors and we get started. They try to do the install of either iTunes or the combo update on THEIR network - still won't work. The genius thinks I have a bad HD and takes the computer for 2 days to look at it.
I finally get to go pick it up - excited that I'll have my iMac (which I use for work) back and functioning again. I go pick it up and they decided that it wasn't my hard drive - but likely my RAM. They couldn't prove it was the RAM but figured since I bought the RAM after I bought the iMac that this must be the issue (even though it was up to exact Apple standards and was from Crucial). So, I think - well, while I have a blank slate I'll go ahead and install Snow Leopard. So, I pick up Snow Leopard and get new RAM too and go home to install.
I get the computer home, put the new RAM in, install snow leopard and get ready to work! After snow leopard install is done - it has some new updates it needs to install. And the update FAILS to install again. Oh, and they never replaced the HD.
So, I call Apple Care again - they have no clue. They suggest making an Apple Genius Bar appointment. So, I take it in again. They run diagnostics on it from their 'Triage' external hard drive and everything checks out. He says its probably the hard drive (same conclusion they came to the first time) and said that they would replace it.
I get the computer back - take it home. Everything is up to date. All the software updates were back in place including iTunes 10. However, I still want to test and see if I can download iTunes and/or do updates. So, I uninstall iTunes and download it again. Same problem. STILL won't install any large software downloads. But, again - Smaller downloads like, flash, java, firefox, etc - all download and install without issue. Just no core Apple updates or things like iTunes will download and install on my iMac.
I then took it to a friends house - set it up on his network - same issue.
So to sum up:
I have re-imaged the hard drive several times
I have replaced the ram
I have replaced my networking hardware (even though other machines on the network have no issues)
I have taken it in twice to the Genius Bar and they still haven't fixed it
The Problem followed the machine and exhibited the same issues in store as it did in my home (so we know the problems stays with the machine)
I have tried it on yet a 3rd network and the issue still exists
The people at the Genius Bar told me that If I still have issues then its with my network - even though its been proven it wasn't.
Its only larger downloads like Combo Updates and iTunes that won't install.
Any ideas? Sorry for the long post but its been quite an ordeal.

Yes, I have tried the updates directly from the Apple website and a different issue occurs. When I do that I get various different errors - the most common saying 'Codec overrun'. This has happened both before and after complete software OS reinstalls (Completely wiping the HD clean).
I did a video of my issue on my iPhone. I had to cut it and compress it to get it off my phone without syncing (because I can't sync it since I can't get iTunes installed now). So, its about a minute long if anyone wants to see it:
http://www.youtube.com/watch?v=8leWwEoIeXI
And yes, we tried to repair permissions a couple times but didn't seem to have any effect on whether it would install these updates. Again, it's NOT all software downloads/installs. It seems to be limited to LARGER pieces of software. Example: Firefox, Flash, Java and Silverlight have all downloaded and installed without error on my iMac. Apple combo updates and iTunes won't install at all.

Blackberry Bold 9900 OS software update from version 7.0.0 to version 7.1.0

Helo Everyone
I tried to upgrade my Blackberry Bold 9900 device software from version 7.0.0 to version 7.1.0 but having difficulties. I tried using the Blackberry Desktop Manager but there was no version 7.1.0 listed among the available updates. Even when I tried to do it directly via the Blackberry official website, Version 7.1.0 was also not listed. Finally I tried to do the update with my phone directly by accessing: Options>Device>Software Updates.
It displayed my Current Version of 7.0.0 Bundle 2406 and an available version 7.1.0 Bundle 1149. But when I Clicked Perform Update to download the new version it showed preparing to download but then displayed an error message such as "The download cannot continue because your device cannot connect to the update server using any of the following methods:Wi-Fi".
Meanwhile, I did not perform the upgrade with Wi-Fi because I have an active blackberry data subscrip of 2GB from my mobile network provider.
Please I need help on how to perform the upgrade from version 7.0.0 to version 7.1.0 with the latest Bundle.
Thank you all as i await your kind solution.
Solved!
Go to Solution.

Hi and Welcome to the Community!
The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to remove OTA Settings badge after delete of IOS 8.0.1 software update from storage

Running iOS 8 I had downloaded and not installed IOS 8.0.1 software update. A "1" Badge appears as expected on my Settings icon. I then removed the software from storage. Settings->General->Usage->Manage Storage but the badge was not removed. Things I have already tried that did not work:
- Checked for software update
- Rebooted phone

So with the release 8.0.2 the badge went away once I updated.
I did however download, watching it until it completed. Then chose "LATER" before the timer ran out.
Then went back to install it. I am not sure if forcing later is needed, but I wanted to make sure it would force it to update the badge to "1" once I went to install it. If someone else who has the problem tries it without choosing "LATER" please update the thread for others to let them know if it was needed.

My workstation won't see Software Updates from my server

Hi guys,
I'm toying around with Software Update Services. I've setup the Software Update service on my Xserve, and I've downloaded the update packages & made them available for clients to download.
The trouble is, when I run Software Update on my workstation, it still seems to connect to Apple for updates; instead of the workgroup server. How do I troubleshoot this? If I look on the Xserve, there is nothing in the Server Admin logs for Software Update that relate to my workstation failing to connect. In Workgroup Manager, I have the Preferences set for my workstation where "Software Update server to use" is set to "http://bugs:8088". With Safari on my workstation, I can open http://bugs:8088 and see the directories where the packages are stored... yet Software Update ignores them!
The Xserve is running OS X Server 10.4.2 and my workstation runs OS X 10.4.5. Any suggestions? Thanks!
Mac OS X (10.4.5)

I to am having the problem with my test client not getting updates from the server. I am the lone IT man in this company so I've had to work slowly to get my Mac server online. I am following the System Imaging and Software Update Administration guide. It said to enable the service, enable and mirror the updates I wanted. For an unmanaged client (like this one) do:
defaults write com.apple.SoftwareUpdate CatalogURL http://ifire.local:8088/. Each time software update runs I get no new software available. I used terminal with softwareupdate -l and followed the process. I get 'Unable to use product xxx' on everything and the line that followes is 'Failed to load distribution file xxx.' I know there is one update for me, Quicktime.
!!HELP!!
G5 Mac OS X (10.4.7)

Problem Connecting to Internet after recent Software Updates from Apple

I have an old iMac 15" flat panel, running OS X 10.3.9, just ran the Software Update an hour ago. Now my computer won't connect to my wireless network via the Airport. I tried to open the Internet Connect apps from Apple and it won't even load, it has this swirling beachball has been on for 15 minutes and it says "Loading Internet Connect..."
Anybody experience something like this! Could this be another Apple blunder with their software update?
I tried, restart, remove the plist of Internet Connect, all those did not help!
Please help. Thanks

Try resetting Airport as per this article;
Resetting AirPort Express
By the way, if your problem has not been solved then leave it as unanswered until such time it is, as you will get more responses.
regards roam

Software update from OS X 10.6.8?

Similar Messages

Maybe you are looking for