Software Update not finding missing loops

I've just updated my MacBook Pro (OS X 10.6.8) from iLife 09 to iLife 11.
In Garageband most of the loops are missing (greyed out). When I click on one I'm given the option of downloading later or now. When I choose 'now' it opens Software Update which searches for updates and tells me that all my software is up to date. If I click on a missing look again the message says that the software instrument or Apple Loop is currently being installed and that I should open Software Update for additional information.
How do I install all the missing loops if Software Update is telling me all my programs are up to date?
Graham

What do you have in...
/Library/Receipts folder?
Getting them Directly is better antway.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Mac OS X 10.5.4 Update ...
http://www.apple.com/support/downloads/macosx1054update.html
Repair Permissions after re-install, then reboot again.

Similar Messages

Problem description: mac mail not opening, software updates not working, app store not opening. imac osx 10.9.5

Problem description:
mac mail not opening, software updates not working, app store not opening. 10.9.5
EtreCheck version: 2.0.11 (98)
Report generated 1 December 2014 16:51:49 CET
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
BenQ GL2240 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 1:32:17
Disk Information: ℹ️
WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (164.03 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
EPSON EPSON Epson Stylus S22 Series
Canon MX410 series
ASMedia AS2105 1 TB
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 210 MB
Backup (disk3s2) /Volumes/Backup : 999.86 GB (506.24 GB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader 7.95 GB
S.M.A.R.T. Status: Verified
EOS_DIGITAL (disk1s1) /Volumes/EOS_DIGITAL : 7.94 GB (7.83 GB free)
Western Digital My Book 1140 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
2TB (disk2s2) /Volumes/2TB : 2.00 TB (1.50 TB free)
Wacom Co.,Ltd. CTE-450
Contour Design ShuttlePRO v2
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24217.979618) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24217.979618) Support
[not loaded] com.parallels.kext.netbridge (9.0 24217.979618) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24217.979618) Support
[not loaded] com.parallels.kext.vnic (9.0 24217.979618) Support
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
/System/Library/Extensions
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
WkSvMacX: Path: /Library/StartupItems/WkSvMacX
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.epson.epw.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist Support
[failed] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.barebones.textwrangler.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[not loaded] com.gopro.stereomodestatus.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.tvmobili.tvmobilisvcd.plist Support
[loaded] fi.polar.libpolar.plist Support
[running] fi.polar.polard.plist Support
[failed] xxx.qnation.PeerGuardian.kextload.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[running] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[invalid?] com.plexapp.helper.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
SmartDaemon Application (/Library/Application Support/CleverFiles/SmartDaemon.app)
SilverKeeper Scheduler ApplicationHidden (/Applications/SilverKeeper.app/Contents/Resources/SilverKeeper Scheduler.app)
Dropbox Application (/Applications/Dropbox.app)
Garmin ANT Agent UNKNOWN (missing value)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.5.7r609 Support
Google Earth Web Plug-in: Version: 6.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
PandoWebInst: Version: 1.0 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.239
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 10.1.12 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
Safari Extensions: ℹ️
Open in Internet Explorer
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS4 Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
GoPro Support
Growl Support
Java Support
MacFUSE Support
MenuMeters Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
Back Up [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      12% Google Chrome
      12% WindowServer
      4% Dock
      2% Little Snitch Agent
      2% SystemUIServer
Top Processes by Memory: ℹ️
399 MB iTunes
322 MB mds_stores
216 MB Google Chrome Helper
193 MB Google Chrome
155 MB com.apple.IconServicesAgent
Virtual Memory Information: ℹ️
6.64 GB Free RAM
3.51 GB Active RAM
1.36 GB Inactive RAM
1.11 GB Wired RAM
1.91 GB Page-ins
0 B Page-outs

[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
Un-install according to the developer's un-install instructions.
You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
CleanMyMac - Uninstall
CleanMyMac2 Un-install
After un-installing, run this program to make sure you got all the pieces.
EasyFind – Spotlight Replacement
Do a backup.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.appstore.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Why is the software update not showing up in general settings?

Why does my software update not show up in general settings?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

Software Update not working

On my Mac Mini Software Update is not working as expected. I have this machine setup with multiple accounts and my kids accounts are very limited so they can use the computer safly while I am not home. My account has admin permissions. When I log into the computer and run Software Update it finds many (11) updates. I click install all and go do something else. I come back about 20 mintues later and found the system sitting at the "login" screen. I thought great it finished. Then I thought that was way to fast. So I log in and run Software Update again. You guessed it the same 11 items need an Update. So now I try and update them one at a time. I successfully updated a few items. Then I thought let me update the 4 items that require a reboot at one time. I started the update and left the machine alone for a while. I came back to the system saying I needed to restart. I clicked on OK. The system then said that it couldn't log out because "Software Update" was running. I could not do anything at this point except hold the power button in until the system powered down and I could then restart it.
To me it seams like a problem with the multi-user setup. Does anyone have any thoughts?
Thanks,
Scott

This did not solve the problem. I repaired disk permissions and deleted all the SoftwareUpdate ".plist" files found in the link. I restarted the Mac Mini. When I tried to run the Software Update for everything it still died. I then ran each update by itself and it worked fine so my system is up to date. However, I suspect the problem will reappear the next time Apple releases many updates together.
I guess I need to figure out the best way to contact Apple directly. And thanks for the info you provided.

HT4623 The 'software update' tab is missing from the General menu. How do I get it reinstalled?

Software Update tab is missing from General settings. How do I fix this. I NEED TO LOAD NEW new a new iOS

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

Software Update Not Working Automatically

Since I upgraded my OS X from Tiger to Leopard, Software Update could not have been working automatically even if it is set to check updates daily or weekly, and the machine is turned on at the scheduled time with an Internet connection. Well, by clicking on "Check Now," I can manually check to see if any updates are available, though.
Does anyone know how to fix this problem?

Thank you for your response, Ahsan.
But, Software Update should run automatically according to your setting, whether or not any updates are available. If nothing is available, Software Update displays a "Last check" date and time, and says, "No updates are available" or something like that. In fact, when I just manually hit "Check Now" button, Software Update did find "Time Machine and AirPort Updates v1.0" published on 3/19/08 while I had set it in the preference "weekly" almost two weeks before.
Strange, isn't it?

Software update cannot find installed App's in sub-folder

Hi All,
I have same kind of problem - I created folder called "iLife' 11" and moved there all App's which belong to this package. As soon as I did this Software Update cannot find anything. For example Apple released iPhoto' 11 (9.1.1) update and Software Update did not find it until I moved it back to "Applications".
BTW I have same problem with Adobe App's. Adobe update did not see Photoshop which has been moved to sub-folder.
My question is DO I have any chance to put App's to sub-folder and get them automatically updated by Software update? IF so, what should I do?

All sub-folders located in /Applications/ not in /Users/username/Applications. Actually /Users/username/Applications/ is empty on my mac.
What I trying to have is sub-folder (for example called Photo where I will have all applications for working with images (Photoshop, Nikon Scan, SilverFast and so on) in one locations or iLife' 11.
I took this idea from folder "Utilities" I can put App there and it worked and updated without any problems.
As far as I understand this problem (from Unix point of view) is a PATH problems. Software Update cannot find App in the folder which not listed in PATH.
If I create link (allies) for application in /Applications/ folder it will updated.

Software does not find the Database server

Hi all,
We are going to move database from old server MSSQL 2005 Express to the MSSQL 2008 R2 STD. For test I backuped DB from old server then restored at the new one. For some reason the software does not find the new server.
I checked everything as from the link described:
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx?Redirected=true
Also at the new server we have another production DB that is running without any issues...
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected
host has failed to respond 195.30.95.163:80
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at OptoWare.OrderEntry.OrderInterfaces.WebReferenceOWEdix.OWEdixService.OWEdix_GetStatus(String custID, String password, String countryCode)
at OptoWare.OrderEntry.OrderInterfaces.EdixInterface.b(Object A_0, DoWorkEventArgs A_1)
2014-03-31 16:54:58,924 [1] ERROR OptoWare.OrderEntry.Controls.Config.ServiceControl - Connetction to FI1-sv-prod014\mssqlserver failed.
System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured
to allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at OptoWare.OrderEntry.Controls.Config.ServiceControl.i()

It looks like the connection is getting refused because of your application configuration.
Refer similar thread
http://forums.asp.net/t/1180127.aspx?A+connection+attempt+failed+because+the+connected+party+did+not+properly+respond+after+a+period+of+time+or+established+connection+failed+because+connected+host+has+failed+to+respond+
-Prashanth

Mac Book Software Update not working, iTune will not update because of that, iPhone 4 won't connect to iTunes because iTunes is not updated. Mac v.10.5.8, iTunes v.10.5.2, iPhone4 iOS 6

Mac Book Software Update not working (Software Update does not have any new software for your computer at this time), my current MacBook version is 10.5.8.
As a result I can't update iTunes, version 10.5.2 (This software requiers Mac OS X version 10.6.8 or later)
Now when I connect my iPhone 4, version iOS 6 iTunes can't connect to iPhone (The iPhone "XXXXX's iPhone" cannot be used because it requiers iTunes version 10.6.3 or later.)
so in a nutshell can't use iphone 4, because iTune is not updated and will not update because Mac Book is not up to date and will not update either.
Please help.
Thank you
bt465

Welcome to Apple Support Communities
Snow Leopard is a paid upgrade. http://support.apple.com/kb/sp575 Call Apple to buy Snow Leopard. Then, make a backup, insert the DVD and upgrade. When it finishes, open  > Software Update

Luxadm probe / Could not find the loop address for the device at physical path

Using EMC FibreChannel Disks on a Solaris 10
# luxadm probe
No Network Array enclosures found in /dev/es
Error: Could not find the loop address for the device at physical path.
# echo $?
255
Any ideas how to fix?
Thank,
Marcel

Hi Marcel,
Which Solaris 10 release is this?
I found a very old bug that says this problem is already fixed in Solaris 10 although the bug description says
its mostly seen on Solaris 8 and 9.
https://bug.oraclecorp.com/pls/bug/webbug_print.showbug?c_rptno=15123550
The bug says that these errors are displayed when StorADE 2.1 is running its rasagent cron job, which executes a luxadm display.
This process runs in the background so the user is not aware that another luxadm display process is running.
Work-around: Do not run Storade rasagent cron job at same time as another luxadm display process.
I hope this might help to debug this problem but I puzzled why this might be happening if its already fixed.
Let me know if the workaround helps or so I can follow-up with the right support team.
Thanks, Cindy

TS1394 Software Update NOT WORKING (Snow Leopard)

Software Update NOT WORKING (Snow Leopard)
Hi, I am currently using Snow Leopard 10.6 on my iMac. I opened iTunes and was told there was an update available so I clicked the button to download it. This obviously opened up the 'download' screen with blue bar. The blue bar does not move and the message comes up that the download failed. I have tried troubleshooting, but the message I get is that I am not connected to the internet - which I am.
Please help.

Check your iTunes version, it's reporting v10.6.3 here on 10.6.8 and no updates required.
You should be able to download it from here
https://www.apple.com/itunes/

My phone is saying "software update not available at this time" - is anyone else seeing this?

my phone is saying "software update not available at this time" - is anyone else seeing this?

With everyone and their iDogs trying to update at the same time, things are gonna be a bit bumpy off the bat trying to update and/or activate.

Have been using successfully Acrobat 8 Standard, version 8.3.1 for years. Suddenly can not digitally sign anything because software can not find "existing digital ID file?

Have been using successfully Acrobat 8 Standard, version 8.3.1 for years. Suddenly can not digitally sign anything because software can not find "existing digital ID file?

Are you still using Acrobat 8? If not read further.
All Acrobat versions prior to 11.0.07 had a security flaw that they allows signing with certificates that had "Extended Key Usage" (EKU) restricted to certain certificate uses and those did not include document signing. Most frequently those were certificates with "Client Auth" or "Server Auth" in EKU. Acrobat/Reader 11.0.07 fixed this problem, which also means that while previous versions accepted such certificates for signing 11.0.07 and later do not.

Software updates not available

I downloaded the new IOS 7 via Wi-Fi with my iPhone 4. After download completed IOS 7 doesn't want to install. I get this message : software update not available for the moment. Try later.
Anyone have this issue?... Is there any procedure for this?
Thanks,
Al

Alanders wrote:
I downloaded the new IOS 7 via Wi-Fi
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

Software update cant find updates

software update cant find updates

If you just got an iOS 6 or later on your iPad, you'll want an Intel Mac to get any updates directly from it to the iOS device. PowerPC Macs won't cut it. That means go to your Mac's Apple menu -> About This Mac to determine if you have Intel or PowerPC G4, or G5.
See this tip:
https://discussions.apple.com/docs/DOC-6021

Software Update not finding missing loops

Similar Messages

Maybe you are looking for