Software update, now apps won't start?

I just updated the software in my girlfriend's Iphone 3gs, and now the downloaded apps wind up on a separate page, and they won't start up. Their title pages just flash onscreen, then discontinue. No error messages.

It sounds ljke you interrupted an update that was failing. You said it was reinstalling upon reboot? Something's wrong there.
Clone the external drive to the internal.
Use Disk Utility to Restore your external to the internal or download and use CarbonCopyCloner.
Message was edited by: Gregory Mcintire

Similar Messages

Just did software update, now mail won't open!!

I just ran a software update and now may mail application won't open. These are the five updates that I installed:
Backup 3.1.1
iPhoto 6.0.6
Airport Base Station 5.1
iTunes 7.2
Mac OSX Update Combined (PowerPC) 10.4.10
I don't think I needed to install that last one, about the Power PC....Anyone know if that is enough to keep my Mail App. from openenig? I can still check my e-mail via .Mac, just not through my Mail Appliacation.

Did you download the correct Combo for PPC, since it
appears you do not have an Intel Mac?
If the correct Combo version, then I think you should
run Disk Repair from the original Tiger install disk
to check out your hard drive.
How much free disk space do you have on your hard
drive, or if partitioned, on the boot partition?
Ernie
Ernie,
thanks for the suggestions. I'm not quite the Mac expert I'd like to be, so bear with me please. How do I know if I downloaded "the correct Combo for PPC, since it appears you do not have an Intel Mac?" Wouldn't my computer automatically download the correct one? How can I check if it's the right one? ALSO,
How do I "run Disk Repair from the original Tiger install disk to check out your hard drive"? Do I need to insert the original startup disk again, or can I do it without it?
When doing info on my mac, it says I only have 6.1 GB left available. THANKS FOR YOUR HELP!!!!
Wade

Did latest security update, now emac won't start

Hello, please help. I'm only have one mac, so I'm desperate. I have an emac running os 10.4. I just performed the latest security update (and itunes and quicktime) now the mac won't start. I get to the apple logo and the spinning/loading icon and it stays there forever. I started from my original disc and did a disc utility check, and everything is allright with the hard drive. It was working perfectly until I installed the update and did the required restart!

Hi OneDayMatt, and a warm welcome to the forums!
I agree, but 3 points...
#1, When was the last time you saw truth in advertising?
#2, I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
#3, Being in the Right in an accident may not be all you can do to save your behind!

Installed latest updates, now PB won't start up!

i installed the latest software updates for my powerbook g4 (running leopard) and it restarted normally after finishing the install.
after it restarted, i opened camino (my web browser) to check my gmail and when i signed in to gmail a dialogue box kept popping up saying that it "could not connect to spell check". huh? so then camino froze up (spinning color wheel of death) and i force quit it. when i tried to open it back up, the dock icon just bounced continuously and it never opened. so, i force quit it again. then i tried to open firefox, and same thing... bouncing dock icon, no firefox.
i went to restart the computer again, and it froze up during the restart process and i had to just push the power button to shut it off. then when i pushed the power button to turn it back on, it would not restart. it goes through the grey screen with the apple logo and the progress wheel, and then the screen goes black, and then goes back to the grey screen w/apple logo and progress wheel, screen goes black again, and repeat. i finally just shut it down.
any ideas *** might be going on here? i installed 4 updates, if i remember correctly one was for itunes, one was for my ipod nano software, one was a security update and one was for ilife. i have no idea why installing apple updates would totally fry my laptop... any help is appreciated.
p.s. i have tried resetting the PRAM to no avail. nothing happens. on another note, my battery has not been charging for the last couple of weeks (if the laptop is not plugged in to the ac adapter, it dies immediately). this is the second battery i have for this PB... the first one was recalled.

ok... i just got back from the apple store genius bar and the tech was able to boot my computer up to another mac using a fire wire cable so that i could transfer my files off (i have an emac, so when i got home i hooked them together with a fire wire cable, pressed and held the 't' key while starting the PB up, and it booted as a drive on my emac so i could copy my important files over).
my next step is to send it out to apple service. unfortunately i don't have apple care coverage, but it will only cost $310 plus tax to fix EVERYthing that is wrong with it. this works out to be a pretty good deal since i'm fairly sure i need a new logic board, dc inboard, battery, and lower memory slot. hopefully they'll be able to fix all that and send my PB back to me good as new.
unfortunately, i don't know how to solve the 'not being able to start up' issue, and i'm sorry to hear others are having the same issue. the tech at apple was not able to get my PB to start back up even after resetting the PMU. hopefully someone else will find a solution to this... as for me i'm just going to bite the bullet and send it out to get fixed.

Software update now phone won't synch!!!

Hi!
Can anymore please help me!
So i have the latest iPhone 5S, it stated it needed updating in software, so I updated it to iOS 7.1 today, but not via my itunes, it was just updated on the phone.
The software updated without any problems at all, but when I have gone to link it to my Macbook, it has stated that it is unable to start synching, this has happened every time, has anyone else had problems with this!
Thank You!!!!

Actually, it would explain why the battery depletes. If the device is constantly trying to search for the network it will run the battery down quite quickly. I'm skeptical that the sim card will fix it since Verizon doesn't use a sim card in the US. The sim card is only for international roaming. I don't know what happened during the update but you may need to reload the OS on the device.
And, "POS?" I've had my Z10 since launch day and love it.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Ran updates, now computer won't start up

Hi,
My sister just ran a bunch of software updates. A message appeared that said couldn't update iDVD because program could not be found. Then it asked to restart the computer, which she did. A grey screen appeared with the apple in the middle and a spinning disk. Then after a long while it went to a blue screen sometimes with a spinning disk again. She has tried to reboot but the same thing happens. Any thoughts? Thank you!!

Hi help209, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

Software Update now program won't recognize my camera

Monday, I installed the latest software update from apple and when I launched final cut pro, it no longer sees my camera. I am using a sony HDR-FX1 hd camera. What can I do to fix this issue?

I just had a similar issue with a different piece of equipment. Could it help to go to the Sony website or google search to see if there is a driver or other software for the camera to install to be compatible with the update??

G5, updated software and now it won't start up past the grey apple screen

Hello,
I'm in dyer need of help. I just purchased an old G5 from a friend and when I connected it the internet it said there were a few (7 or 8) updates available for the system. There was very minimal memory left on the system but I proceeded with the updates, it said the system was going to restart after the updates. The grey screen appeared with the apple logo and the circular loading graphic but right after that the screen went blank and now each time I try to start the computer up it does the same and shuts down after that screen displays.
Is there anything I can do?

I'm not able to do that without the proper install disc, am I correct?
Correct.
Is it possible for me to use that or am I in the same boat without the proper install disc?
Correct, you need an Install Disc.
Or will it try to install on my iMac?
Disconnect them to be sure.
Sooo, what is this Install Disc you're talking about? The iMac's Gray Disc? That won't work for the G5.
There's still a chance of repairing the HD, Your best bet is DiskWarrior.
http://www.alsoft.com/DiskWarrior/
BTW, you might enjoy these DiskWarrior review/recommendations...
http://discussions.apple.com/thread.jspa?messageID=9645801&#9645801
http://discussions.apple.com/thread.jspa?messageID=10541019#10541019
http://discussions.apple.com/thread.jspa?messageID=11918925&#11918925
http://discussions.apple.com/thread.jspa?messageID=12684129#12684129
http://discussions.apple.com/thread.jspa?messageID=12744794&#12744794

Installed updates, now coputer won't start

I clicked on install updates and then it wanted me to reboot, so I clicked on reboot. Now my computer will not start, a blue screen came up and it said " that a problem has been detected and windows has been shut down to prevent damage to your computer". I turned the computer off for about 4 timesa and this message still comes up.
What is the problem and how can I fix this problem?

First, try safe mode and setup check disk in the command prompt. (Start - Run - type in "cmd" - type "chkdsk /F /R /B" and hit enter, say yes and restart the computer. Check disk will run and hopefully you can boot into Windows again.
Next, try using safe mode and uninstalling updates listed under Control Panel - Programs and Features - View Installed Updates - and remove one update at a time (starting with the latest); restart the computer and try to load Windows normally until you find the update that caused the problem.

OS updated, now iMac won't start

This AM I downloaded the newest update to OS 10.4.... for intel iMac & shut down as usual after it was complete. Now my iMac won't open - the pinwhirl turns for 90 sec then it shuts down. Unplugging for 30 sec doesn't help. Hardware test is OK.
Any suggestions?

For me the bare minimum is to Repair Disk Permissions before/after and let the Mac do its thing without interference. But my advice has never really faltered when I have time to be more lengthy and serious. If you search this forum with my name I think you will find my same detailed advice all throughout last year since the Intels came out.
I can't find it tonight, but there is a Knowledge Base article from Apple that advices the same thing. Folks take the whole process for granted because Macs "just work," but if you think about it, what is more critical than Security or Mac OS X updates? So when folks come here spittin nails and cursing Apple engineers because they didn't really pay any attention to any special instructions that came with the firmware update and they screwed the pooch, had to erase and reinstall and lost all their data because they didn't have a backup, I give 'em my best Sunday mornin' sermon about how to fix it and how not to have it happen again.
I've had Macs since the first one when I went to Dallas, TX for grad school at SMU in 1984 and I barely could say hello in English and maxxed my Papa's bank card to buy it cause I didn't know how to type, and I've never had a major issue on a one of them, no major repairs. I have done stupid things and had to erase and reinstall, but it was my own dumb idea that didn't work!
I guess that is much more answer than you really wanted!

Failed update, now macbook won't start

I got a notice that I had updates available and clicked install and restart. After loading the updates, it said all updates had failed and then restarted on it's own. However, it just went to a blue screen that gets brighter and darker with the scrolling wheel popping up every few seconds. I tried an SMP reset, a safe restart by holding down the shift key at restart and also held down option, ctrl, p, r for three restart cycles. none of this is working. Any suggestions for what may be wrong and how to fix it?

Start you MacBook Pro with the original DVD that came with the MacBook Pro and run disk utility on your hard drive to repair it, also repair your permissions.

Cancelled update, now Firefox won't start

Last night I cancelled a Firefox update while it was in the process of updating (because I'm a bit of a curmudgeon) and now when I click the Firefox icon on my tool bar, it just bounces once and then does not open. I tried downloading the newest version of Firefox just a minute ago but it is not compatible with my system, thus I'm not sure what to do as I rely of Firefox and all the bookmarks I have saved. Can you please send me an update link so that I can update, and actually let it update this time? I'm running a Mac that I purchased new in July 2007, so I'm not certain of the OS or any other features.
Kindly,
Marit

Firefox 4 and later require at least OS X 10.5 and an Intel Mac.<br />
You should consider updating to OS X 10.5
* http://www.mozilla.com/firefox/6.0/system-requirements/
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

Firmware update, now it won't start poperly!

I just got my macbook back from a 29 day service, the shutdown problem, guess that dosen't matter.
However it workt fine to boot up and everyting was going fine, until I did the firmware update for SMC? The fan speed control update!
There is no doubt that the fans sounds more, they are! Alot more. Well thats not the problem.
The thing is, when I power on my macbook the only thing that happends are the "sound loop" and a black screen. Nothing more! After some google-ing i found out that I maby had to reset the "PRAM"? After powering on press altfunktionkey+RP and the machine reboots. At first I thought that solved my problem, but I have to keep resetting it every singel time I reboot/power-on the computer and that is realy annoying.
So the BIG question is, is it possible to downgrade the firmware back to the old one? And if it is HOW do I do it?
Thanks for your sugesstions!

here is the link to repair permision:
http://docs.info.apple.com/article.html?artnum=25751
just restart using your installer disc by pressing C when the disc already inside the macbook, or press option key and choose 10.4.x folder from the disc.
Then go to disk utility and repair permission, and hope that solved your problem, and repairing disk while you are there won't hurt either.
You can also reset the pmu too.
http://docs.info.apple.com/article.html?artnum=303319
Good Luck

Laptop froze during software update now it won't boot?

I can get in into disk utility and have erased my disk, but cannot reinstall OS X. I believe the issue is that cannot erase, partition, or unmount or "OS X Base System" in terminal. I've tried restoring a backup from Time Machine and even inserting an old snow leopard software disk.
Any suggestions? I'm about ready to give up!

Disk Unmount Using Terminal
Disk Unmount Using Terminal (2)

I have tried to update from Leopard to Snow Leopard using disk. New OS wouldn't load and now laptop won't start at all

I have tried to update from Leopard to Snow Leopard using disk. New OS wouldn't load and now laptop won't start at all. Simply get the Apple logo and the clock below and then after about 10 mins the laptop switched itself off. The Snow Leopard disk is a brand new family edition. Error message when attempting to install was that "this software cannot be installed on this disk".

Thanks Fred, but I've tried '''ALL''' that already.
I '''THINK''' I might have found the problem - the Profiles folder has been locked by inherited properties from the levels above. I have had to go all the way up to my User folder and reset ALL the properties from there down to be unlocked so that I could remove the prefs.js file so that it could be recreated on the next launch of FF. Exactly why my User folder is locked in such a way as to stop me/FF making changes when I have been able to alter preferences at will in the past, I don't know ...
So far, so good. I have since done a complete shutdown and when I restarted this morning, FF seems to be behaving itself ...
flashfletch

Software update, now apps won't start?

Similar Messages

Maybe you are looking for