Software Update Point doesn't show Win 2012 R2 and Windows 8.1 updates

I started deploying Windows 2012 R2 Datacenter servers and some Windows 8.1 workstations. I wanted to make sure that my Software Update Point was downloading updates available to those OS's and after going in to Administration -> Overview -> Site Configuration
-> Sites -> Configure Site Components -> Software Update Point, I notice that those OS's weren't available to select. 
I then did some searches on the web and thought my problem was two fold:
1 - I was using SCCM 2012 SP1. 
2 - My SCCM 2012 Software Update Point was on a Win 2008 R2 server
So the first thing I did was upgrade from SCCM 2012 SP1 to SCCM 2012 R2. I then created a Windows 2012 R2 Datacenter server and installed WSUS on it. I then added the server as a Site System Server, added the Software Update Point to it and configured it.
Unfortunately, this still didn't help me as you can see from the screen shots below:
What am I doing wrong and what needs to be done to have all the updated Operating Systems and Microsoft Software added to my Product list?
Thanks... Frank

To follow on to narcoticoo's statement, have you actually initiated a catalog sync from within the ConfigMgr console yet? If so, has it completed successfully (you can check the moniotring workspace or you can watch the wsyncmgr.log).
Jason | http://blog.configmgrftw.com
Jason...
I just ran a Synchronize Software Updates from ConfigMgr Console. I then went Monitoring -> Software Update Point Sync Status. It's showing my new WSUS server ( 2012 R2 ) but it's not showing any updates are being sync'd through it. See this screen shot:
I then went to the wsyncmgr.log file on my site server which is the OLD WSUS server ( Win 2008 R2 ) and say this:
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=PREP-SCCM12.<domain.org> SITE=STA PID=5224 TID=4028 GMTDATE=Wed Feb 26 19:00:40.236 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found on site STA. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.236+300><thread=4028 (0xFBC)>
Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.279+300><thread=4028 (0xFBC)>
Setting sync alert to active state on site STA $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.313+300><thread=4028 (0xFBC)>
Sync time: 0d00h00m00s $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.360+300><thread=4028 (0xFBC)>
Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\Win 7 Updates up to Aug 2012\0048da55-f46f-4452-b4c1-37c0f295333b\IE9-langpack-Windows7-x86-xho.exe, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.042+300><thread=4028 (0xFBC)>
Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\Win 7 Updates up to Aug 2012, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.067+300><thread=4028 (0xFBC)>
Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\Win2k8 Updates Until Aug 2012\000f8a0a-825c-457b-a15b-57ade145a09b\windows6.0-kb2653956-x64.cab, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.119+300><thread=4028 (0xFBC)>
Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\Win2k8 Updates Until Aug 2012, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.144+300><thread=4028 (0xFBC)>
Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\Win 7 Updates for Sept 2012\10f3ec1c-f096-4a82-ae41-440ba5328467\Windows6.1-RTM-Client-NEUTRAL-X86.EXE, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.173+300><thread=4028 (0xFBC)>
Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\Win 7 Updates for Sept 2012, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.199+300><thread=4028 (0xFBC)>
Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\XP Updates Until Sept 30\17165524-99fa-49f7-91e6-457d43d4a48e\Windows-KB890830-V4.12.exe, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.228+300><thread=4028 (0xFBC)>
Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\XP Updates Until Sept 30, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.254+300><thread=4028 (0xFBC)>
It appears to me that when doing a Sync, it's still trying to use my OLD WSUS server instead of my new one. I removed the Software Update Point from the OLD WSUS server and uninstalled WSUS from it. I'm not sure why it's still trying to sync from the old
server rather than the new one. Any ideas?
Thanks... Frank

Similar Messages

  • How can I get photo of callers to vshow full page since I just did the update it doesn't show but a thumbnail pic

    How can I get photo of callers to vshow full page since I just did the update it doesn't show but a thumbnail pic

    That is the design in iOS 7.1 and there isn't any way to change it. You can provide feedback to Apple if you want: http://www.apple.com/feedback/

  • HT1386 how do I sync manually, with new update it doesn't show option?

    How do I sync manually, with new update it doesn't show the option?

    For iTunes>Help>iTunes Help>Sync you device>Setup syncing
    Sync your device manually
    If you use manual syncing, you can sync items from more than one iTunes library to your iPod. (You can sync iPod touch, iPhone, and iPad with only one iTunes library.)
    You can manually sync music, movies, TV shows, podcasts, and iTunes U lessons. You can’t manually sync photos and info (contacts, calendars, bookmarks, and so on).
    Connect your iPod, iPhone, or iPad to your computer and select your device.
    Click the Summary button and select “Manually manage music and videos” (below Options).
    Click the On This Device button.
    Click Add To on the right side of the iTunes window.
    Drag items from the left side of the iTunes window to the pane on the right. To add other types of content, choose a category from the Library pop-up menu.
    Click Done.
    If you use automatic syncing, you can also add items to your device by dragging. To drag items to an automatically synced device, follow the instructions above, but skip step 2.
    The picture from the iTunes Help do not display.

  • I am on ios 6.1.2 but when i try to update it doesn't show ios 6.1.3

    I am on ios 6.1.2 but when i try to update it doesn't show ios 6.1.3

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    Also see here...
    How to update your iPhone, iPad, or iPod touch

  • Hi,my apple tv show me only computers and settings only after update the new software

    Hi my apple tv show me only computers and settings only after update the new software

    Try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router.

  • Preview doesn't show up in the capture window

    When trying to capture, the video preview doesn't show up in the capture window, only the color bars. I am able to run my transport with the buttons and the key commands, so I know the Canon ZR500 is really communicating (easy setup: DV-NTSC), via firewire. My scratch disk is a G-Raid hooked up through the firwire 800 input. The crazy thing is, it worked only one time. I've wasted one whole day and this morning, restarting, rebooting, unplugging, different tapes, etc. Next step is takew my entire setup to the so-called Genius Bart and see if Apple's Geniuses know anything about Apple software. Frustrating as ****. I will never buy Apple again.

    Careful about editorializing. There are lots & lots of Mac users who are successfully capturing from Canon camcorders. I am one of them, and have never had a problem. So there is something in your setup that needs to be uncovered, it's not FCE or Canon per se.
    One observation, you have a small hard drive (100GB) and even though you appear to have 59GB free, that's actually not a lot of space. One hour of DV consumes about 13GB and during capture the Mac temporarily needs nearly 2x that space, which means your system is using the 'inner' cylinders of the hard drive, where performance slows down; this could explain your dropped frames problem. Can you move some stuff off your system HD onto your G-RAID (say, your iPhoto and iTunes libraries if you are using those apps, they often take a lot of disk space)?

  • I have sharing set up but it doesn't show it in my itunes window

    i have sharing set up but it doesn't show it in my itunes window how do i get it to show?

    more often than not, this issue is due to network and/or firewall settings. check out these links:
    Troubleshooting security software issues
    Troubleshooting Home Sharing
    and, last but not least, see this discussion concerning bonjour being the culprit.

  • My ipod touch 4th Gen doesn't show me the music and videos

    My ipod touch 4th Gen doesn't show me the music and videos I have, even though I can see it all in the I tunes and I can see that the ipod memory is full as it was... What to do???
    Thx

    Not compatible.
    All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory. The 4G only has 256 MB

  • I just created a new apple id for my self and when i go to update an app it shows my moms email and she wont tell me her password how do i get my email to show up

    i just created a new apple id for my self and when i go to update an app it shows my moms email and she wont tell me her password how do i get my email to show up

    You should have your stuff separate from your mom's. Delete all the apps downloaded or purchased with your mom's Apple ID and download or purchase them with your own Apple ID. Back up files and data first if possible.

  • TS3694 I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

    I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

    Hi Jen.  My daughter just compleated her nursing program and is now working as a full time nurse.  Focus and study hard and soon you will be there too.  Now to the problem at hand.  I have the same problem.  I gave up on it and satisfied myself with my iPod without the upgrade.  Reason being I've read so many posts of people having problems after the upgrade.  But I'm sure other factors are involved.  Nevertheless here is the fix most say works to solve the problem:  What ever virus protection you have installed on your computer, disable it.  Then try to install the update. After that enable the protection. I had Kaspersky, and it does it's job well. The thinking is, the virus protection is blocking the upgrade.  Hope this works.   Charlie

  • Hi, my dvd drive doesn't show on my computer and device manager. can anyone help me?

    Hi, my dvd drive doesn't show on my computer and device manager. can anyone help me? Notebook HP dv6700z.
    This question was solved.
    View Solution.

    Hi,
    If the drive is not showing in the list of bootable devices, you can be fairly certain that it has suffered a Hardware failure and will need to be replaced.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HT1551 I just did the update for my apple TV and it got halfway through the update the TV screen showed a itunes logo and a plug in cord and wouldnt respond. I unplugged it and plugged it into my computer to try and restore it and now I can get audio but

    I just did the update for my apple TV and it got halfway through the update the TV screen showed a itunes logo and a plug in cord and wouldnt respond. I unplugged it and plugged it into my computer to try and restore it and now I can get audio but no vide

    DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

  • I purchased a book and it doesn't show in the library and when I try to download the message says already downloaded

    i purchased a book and it doesn't show in the library and when I try to download the messages reads already downloaded. how can i get this book into my library

    What book?
    An ibook?
    Or an audiobook?

  • The App Store doesn't show me about featured and top charts

    The App Store doesn't show me about featured and top charts

    Thanks Demo.  i had turned on restrictions but I had totally forgotten about it.  I think I had turned it on more just to see what it was, and I had never seen any app be restricted from downloading big before.  I would have never figured this out as there is absolutely no indication in the App Store as to why the button is missing.  Thanks!!

  • I am having mac book. I order for I-boost up software for $9.99 on 5th oct 2012 installed and paid through credit card. Again on 8th oct2012 my credit card debited with $9.99 please look into matter why this amount debited ,if wrongly debited please refun

    I am having mac book. I order for I-boost up software for $9.99 on 5th oct 2012 installed and paid through credit card. Again on 8th oct2012 my credit card debited with $9.99 please look into matter why this amount debited ,if wrongly debited please refund.

    Apple deosn't respond here, just other users like you.
    iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store

Maybe you are looking for