Software Update shows error i.e. Installation requ...

I have downloaded nokia Software Updater for S60 and it shows error during the start of installation I have P4 2.95 GHZ processor and 256 MB RAM 4 GB free space on C: and D: drive.

i could never install nokia software updater on my windows 7...it had been showing numerous errors such as insufficient ram,incorrect drive,etc....finally when i completed the installation,it showed message "latest version of nokia software updater is available. You must update to latest one to be able to update your phone"...i felt ditched to the core...

Similar Messages

Software update shows error message iMac, Mac OS X (10.6.8)

Why does software update show error message, reads check network connection when the network is connected? iMac, Mac OS X (10.6.8)

solved

HT202879 I am stumped - trying to open a recent Pages file but error message says that I need a "newer version" of Pages. My software updates show that there are no updates available. I recently updated Pages but it is not consistent.

I am stumped - I am trying to open a recent Pages file (created with a newer software that I thought was correctly installed recently) but error message says that I need a "newer version" of Pages. My software updates show that there are no updates available. Pages 09 version 4.3 shows as my current version.

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5/5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5.1 sometimes can not open its own files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has not only managed to confuse all its users, but also itself.
Note: Apple has removed over 95 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

Software update show this: error NSURLErrorDomain -1100 and won't work

Today I'm looking for updates in OS X and Mac App store show me "error NSURLErrorDomain -1100". Can you help me with this??? A lot of thanks!!!

Software Update showed the iTunes update.
Could you install the update?
I was able to download the iTunes 10.7 update just now successfully.

Problem updating After Effects CC (2014) I get this message: Update Failed Error encountered during installation. (U44M1P7)

Problem updating After Effects CC (2014) I get this message: Update Failed Error encountered during installation. (U44M1P7)

Hi,
It’s version 13.1.1 It’s a trial version.
I am updating it from the Creative cloud desktop application.
I have the photography subscription with Lightroom and Photoshop with Creative Cloud.
I was interested in trying out the video software and have trials of Premiere Pro as well as others. The CC desktop app alerted me to the AF update just as it does for the others I subscribe to plus the ones I am using as trials. I have not had any problems with the other apps (trial or not), only with AF.
Thanks.
Nancy Chadwick

This is my iphone 4 ECID: ********, now restore or update showing error code 1 what can i do now?

this is my iphone 4 ECID: ******, now restore or update showing error code 1 what can i do now?

From the article:
Error 1 means that your device or computer may have a hardware issue that's preventing the update or restore from completing.
1.Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
2.Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
3.Confirm that your security software and settings are allowing communication between your device and update servers.
4.If you still see the error message when you update or restore, contact Apple support.

"software update" "An error occurred while checking for updates"

When I click on "Software Update", an error results, "An error occurred while checking for updates". It is definitely connected to the internet. I was gifted a G5 and I installed a new hard drive and loaded the OS, OS X 10.3.5. That version of Safari does not display pages correctly. E.g., support.apple.com/downloads just clocks on the righthand side of the page.
Because cannot access that link, cannot manually update the OS - I was thinking this version is "old" and as a result, unable to connect to apple's update server. Thanks.

Thanks, I upgraded with your info.
Ultimately, I am trying to access mail.google.com but receiving the following error with opera v9.5.x: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
Safari gives the following: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
I can access ask.com and using opera to type this response.

How to troubleshoot Software Update Deployment Errors

Hi Guys,
Could you guys please help me to troubleshoot 'Software Update Deployment Errors'. I have been trying to troubleshoot the below mentioned errors but I am not sure what step should I take for each different errors.
Could you guys please help me stating what kind of troubleshooting steps should we take for such update deployment errors.
Many Thanks,
Chandan

You would have to examine client-side logs like UpdatesDeployment.log, U*.log in general, ScanAgent.log, WUAHandler.log, WindowsUpdate.log and CI*.log.
Torsten Meringer | http://www.mssccmfaq.de

I tried updating my Photoshop CS6 via the cloud and received the following message...Update failed Errors encountered during installation.(U44M1P7). What does that mean

I tried updating my Photoshop CS6 via the cloud and received the following message...Update failed Errors encountered during installation.(U44M1P7). What does that mean

http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

Photoshop CS6 update failed - errors encountered during installation U44M1P7

Photoshop CS6 update failed - errors encountered during installation U44M1P7up

Hi Creativegeek_route66,
Please follow the steps mentioned in the below article.
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
Thanks

HT1338 Macbook Pro, OS X 10.8.1 when start software update receive error msg NSURLErrorDomain error -1100, pls advise what is this error and how to check software update?

Macbook Pro, OS X 10.8.1 when start software update receive error msg NSURLErrorDomain error -1100, pls advise what is this error and how to check software update?
Thank you, best regards
Sergey

Several users are reporting a server problem with Software Update. Why not wait and try again later today or tomorrow to see if the problem is resolved.
If the problem is on your computer then give this a try:
Fix for Software Update
See Troubleshooting Automatic Software Update in Mac OS X.
Delete the following files:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist where "xxx" is a number.
/Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder)

TS3694 i have dropped my iphone4 . i cant get to the software update the error has occured wt can i do

i have dropped my iphone4 . i cant get to the software update the error has occured wt can i do for software update

What is the exact wording of the error message received?

Software update unexpected error on installation

I was updating with the latest combo updater to 10.4.11 from 10.4.8, and iphoto 6.0.6 and backup 3.1.2 and I get a message that an error occurred and the software couldn't be installed. Quit software update and try from Finder. I did with same results. Used disk utility to repair permissions and no luck.
Even if I just try to install one of the three I get the same results. Have 2.1Gb available disc space.
Any ideas?

Hi.
You say you have 2.1 Gb free, but, what's the size of your hard drive? Less than 15% of free space on your hd is a recipe for disaster in OS X.
If there's less than 15% of free space, then you should transfer or delete files in order to free up space beyond the 15%, and also clear the Software Update cache by moving to the Desktop or trashing these two directories:
/Library/Caches/com.apple.SoftwareUpdate
/Users/youruserfolder/Library/Caches/com.apple.SoftwareUpdate
and launching Software Update again.
Good Luck.
Good Luck.
If your

Failed software update returns error code 0x87D00668

We are using Secunia CSI to create and publish 3rd party software update packages to SCCM 2012. I have one client computer running Windows 7 Pro x64 that is having a problem with one update. When the user tries to install the Adobe Reader update
in Software Center it fails and returns the following error.
The software change returned error code 0x87D00668(-2016410008).
I haven't been able to find any information on this error code. I was just wondering if anyone else has encountered this error and might have any information on it??

The item it's referring to in that error would seem to be the task that can't be found. No?
The issue that needs to be addressed is that the updates aren't needed - they are installed on the server. I've installed the updates manually, rebooted, Software Center should not even be reporting that the updates need to be installed. And back to
the second post above, "Software update still detected as actionable after being applied" seems to be saying that it DOES see that the patch is installed. The question is then, why is it still "actionable"?
Thanks
Why do you think that they are not needed? Have you force CM to scan again for SU? Are they show as being applied in CM12? What does the Windowsupdate.log say about that SU?
I don't think it is a task that can't be found based on that single line from the log file.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ
I don't think the updates are needed because they are installed on the server. You will see in my above posts my reasoning for concluding that the updates are installed: "I have two security updates that are indeed installed (according to Windows Update,
the Windows Update log, and Add/remove programs), yet Software Center shows "failed" and with that exact same error of "Software update still detected as actionable after being applied".
Yes, I've forced multiple rescans (before and after reinstalling the client) over the course of a few days. Software Center still shows failed.
The Windows update log shows that it installed successfully. Here's one of lines in the log for one of the updates (in fact as far as the log goes back, 7-3, it's been saying this):
WindowsUpdate Success Content Install Installation Successful: Windows successfully installed the following update: Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows
XP x86 (KB2729450)
I think, again, we're back to the fact that is is installed but the issue is: "Software update still detected as actionable after being applied" seems to be saying that it DOES see that the patch is installed. The question is why is it still
"actionable"? The client sees that it's installed but ... why is it saying it's still "actionable"?
I realize that this issue might be a little tougher to track down since I couldn't find ANY other reference to it online.
Lastly, Config Manager shows "failed to install update" which is exactly what Software Center reports.
Thanks again, am happy to upload/copy/paste any logs you think would be helpful.

Software update - networking error (Mac OS 10.4.11)

Hi everyone,
I've been having problems running software update on my 867 MHz Powerbook G4. Every time I try to run software update, I get the same message: "A networking error has occurred: timed out (-1001). Make sure you can connect to the Internet, then try again."
I'm using Mac OS X 10.4.11.
My network is running fine, and I've run Network Diagnostics several times fully through to confirm this.
I've tried repairing the disk permissions through disk utility a few times, and nothing's changed.
I tried copying three files from my Library / Preferences folder, along with my Caches folder (after reading that this could fix the problem), but still, software update doesn't work.
I tried running the 10.4.11 combo update for PPC, rebooted in safe mode, and repaired my disk permissions again, but still, no luck.
There's another problem that might be related: Safari can't load pages. Firefox 2.0.0.18 works fine, but Safari doesn't do anything. Also, closing the Safari window (Ctrl + W) doesn't work, quitting the program is the only way to make it go away.
Thanks in advance for the help, it's much appreciated!

Hi James, and a warm welcome to the forums!
To expand a bit on Sig's great advice...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
Also, how much free space do you have on your HDD?

Software Update shows error i.e. Installation requ...

Similar Messages

Maybe you are looking for