Software Update Stuck on "Checking for New Software..."

Not sure why, but today when I selected "Check for New Software" from the Apple Menu, Software Update started checking and does not proceed past that step. I've included a screenshot to show exactly where it's stuck.
http://img409.imageshack.us/img409/9536/picture1ss7.png
Thanks for any help you can give me.

You may want to go to the Apple Downloads site and download the update manually, then check the .dmg with Disk Utilities’ Verify Disk, and then run the update package.
Sometimes there is an internet interruption that can corrupt the download, especially using a modem or DSL.

Similar Messages

  • HT1338 My software updater freezes when "Checking for new software..." and then fans speed up.

    Whenever I run software update, the blue bar freezes at about a fourth of the way across while "Checking for new software..." and then the fans sometimes speed up until I click Cancel. Sometimes it eventually completes "Checking for new software..." but when it does it is usually 45 minutes to an hour later. What gives?

    If I reinstall the OS, will that jeopardize my data, docs or photo library? 
    No.  Boot into the Recovery volume (boot with the Command + R keys held down) and first select Disk Utility to  repair disk permissions and the disk.  Reboot and try the App Store again.
    If that fails boot again into the Recovery volume again and reinsatll the system.  Your data and photos will not be jeoparadized.
    OT

  • Software Update Not Working - Stuck at "Checking for New Software"

    Hey Everybody,
    I have recently been experiencing problems with my Software Update. After I open it, it gets stuck at the screen and times-out after a while asking me to check my network to see if I'm connected to the Internet. My internet is working fine yet the Software Update is still not working. I have tried removing the Software Update pdlist and trying to change the cache.db yet nothing is working. I have run the verify disk and repair disk utility with no result. Anyone got any other ideas other then a clean install?

    See if the following fixes the problem:
    Fix for Software Update
    See Troubleshooting Automatic Software Update in Mac OS X.
    Delete the following files:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    /Home/Library/Preferences/com.apple.SoftwareUpdate.plist
    /Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist
    "xxx" is a number.
    /Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder)
    Message was edited by: Kappy

  • Apple Software Update is stuck in the "Checking for new software..." phase

    I installed iTunes+Quicktime using iTunes64Setup.exe and so ASU got automatically installed as well.
    When I manually start ASU, it immediately checks for new software and the progress bar stalls at around 10%. I have not seen ASU run by the task scheduler yet.
    Bonus: The ASU logo has weird colours (http://imagebin.ca/view/XN2-zrN.html)
    Is anybody also having the same problem?

    That's an odd one.
    Have you tried a repair install of ASU?
    Head into your Uninstall a program control panel, select "Apple Software Update" and click "Repair".
    Any help with the hang or the logo issue?

  • Software Update wont check for new software.

    Software Update wont check for new software.

    No - I'm on 10.6.8 and it functions normally, though there are now very few actual updates. If there are no updates the progress bar should still complete in around 3 minutes and announce that there are no updates, so you've got something hanging somewhere. If it's still stuck hit command-option (alt)- escape, select Software Update and hit Force Quit. You could try it again (I should reboot first) in case it's a one-off glitch, but if it still sticks force quit it again.
    The best suggestion I can offer is to apply the combo updater anyway in the hope that it may over-write whatever is causing the problem.
    http://support.apple.com/kb/DL1399

  • Software Update doesn't have any new software for your computer at this time

    HI
    I manged to get all my updates downlaoded and on my server, i have currently enabled 133 of 400 updates.
    I have changed my snow leopard machine to point to the internal update server
    But then after a while of checking this displays software Update doesn't have any new software for your computer at this time
    Which is a Lie, because i know there are updates on the server that the computer needs to have.
    Any Ideas
    Many Thanks

    Oh i forgot to say in consol (from the client) i get can't instantiate distribution from server address  error Domain=NSXMLParserErrorDomain code=70 etc
    Any ideas anyone?

  • I am getting occasional Safari is out of date messages but checking for new software says "up to date".

    weI am getting occasional Safari is out of date messages but checking for new software says "up to date".  Initially we subscribed to Support but did not realize that it has expired.  We have upgraded the OS once but have not received any notices of additional upgrades. So far I have not come across a way to update on my own.

    I suspect this is the issue but wonder whether it is wise to upgrade my model:
    Model Identifier: iMac11,2
      Processor Name: Intel Core i3
      Processor Speed: 3.06 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
    Will it run it?

  • Software Update can't check for updates (Lion)

    Just downloaded and installed OSX 10.7. Tried to run Software Update and get the following alert:
    'Software Update can't check for updates because of a network problem. The file “index-lion-snowleopard-leopard.merged-1.sucatalog” couldn’t be found on the server “swscan.apple.com”.'
    Repaired permissions, created new user account... Issue persists. I'm connected to the internet. Software Update System Preference has no entries in the "Software Installed' tab.

    No I haven't tried to get the individually. I will just wait because I am not the only one in our household who's iTunes won't download app updates.
    The Software Update error has also now changed to:
    Software Update can't check for updates because of a network problem.
    A network error has occurred. Check your Internet connection, and then try again.
    as opposed to earlier when it read:
    Software Update can't check for updates because of a network problem.
    The file “index-lion-snowleopard-leopard.merged-1.sucatalog” couldn’t be found on the server “matsus2.matilda.net.au”.
    So something has changed in the last few hours. Maybe it's not my computer and just something to do with the apple servers. The matsus2.matilda.net.au is the interesting thing as it has no relevance to our internet or home network.

  • OSX checking for new software forever

    After upgrading to 10.5.5 my Dual 2gHz G5 is checking for new software forever
    when I try to upgrade to that latest version of ARDT.
    It goes about 70% and then sits there, with progressbar not making any progress beyon that.
    No crash, I can cancel and quit...but not use Software update anymore...
    Anybody with a fix?
    best
    jtm

    have you tried downloading ard 3.2.2 yourself rather than to use software update to fetch updates for you? you can read about it here http://www.apple.com/support/downloads/appleremotedesktop322admin.html
    you may also like to try the command line. i normally use the command line to perform software update instead of hitting apple > software update... because ive had less trouble running it via the command line. the command i use is +softwareupdate -ai+

  • Software Update can't check for updates because of a network problem....after firmware update

    I just bought a MBP w/Lion (10.7.4) and ran software update.  The first two items I updated were firmware for SMC (ver 1.5) and EFI (ver 2.7) and now my MBP says: "Software Update can't check for updates because of a network problem."  However, I can connect to the Internet to surf the web just fine.  This is the only update I've made.  Can firmware be uninstalled?  If I reverted to the image on my external drive that I did with CCC prior to the update, would that fix it?

    Hi! i hope i'm able to explain what i worked out and what worked for me. I had the same message coming up "no internet connection, run network/internet diagnosis" etc etc. Internet connection was fine. What i finally did:
    Open airport, check internet, internet options ; with me, IPv6 was set as  this (the letters are in german order and not in a english order, sorry...):
    In system prefs, network/TCP/IP  IPv6 was set to "automatic":
    I did change the settings in Airport back to "Link Local" and Software Update worked immediately normal whithout restarting the computer.
    No idea what changed the settings; however i did run permission repairs beforehand with no connection to any problems, just as a normal kind of 'maintenance routine'.
    Hope this helps others, it worked for me.
    Cheers
    Csico 

  • Software Update can't check for updates because of a network problem.

    The software update app fails with following error msgs. But all network functions fine.
    +A networking error has occurred: timed out (-1001). Make sure you can connect to the Internet, then try again.+
    +Software Update can't check for updates because of a network problem.+
    Deleted the software update plist files in $HOME/Library/Preferences, $HOME/Library/Preferences/ByHost, and HD/Library/Preferences, as per some posts. no effect. Problem persists.
    Any Ideas?
    Thanks

    Same here
    The last update I managed to do without problems was +Java for Mac OS X 10.5 Update 5+ - since yesterday the update process has become much, much slower and when I try to install +Security Update 2009 005+ and +iTunes 9+, it fails, usually with the aforementioned error, but also sometimes with Error 400 or Error 600, IIRC.

  • Software update can't check for updates because of a network problem mac

    hi i am facing below probelm on my mac ... i have done all the ip setting on my mac  Error is software update can't check for updates because of a network problem mac.Can any one please assit me...

    Can  Some solve my problem.....

  • "Software update can't check for updates because of a network problem" - help!

    Recently, when I perform a software update check on the pulldown Apple menu, I get this error:
    "Software update can't check for updates because of a network problem."
    The only problem is that my network works just fine. I use the internet and get emails without any problem. But I can't figure how I can fix Software Update.
    The only relevant updates have been for Glims and 1Password. Oh, and note the same problem trying to access the App Store; I just get a "Can't connect to the App Store" error.
    Any hints?

    I have to solve all my own problems.
    The problem was due to Little Snitch. Once I upgraded from 2.4.0 to 2.4.2, my system works swimmingly again.
    FIXED!

  • After installing Lion, the Software Update "can't check for updates because of a network problem.But I've no network problem. My internet is working properly. could you help me?

    After installing Lion the Software Update "can't check for updates because of a network problem". But I've no network problem. My internet is working properly. Could yoy help me?

    Hi All
    Same problem this morning but now resoloved.
    Update require using the following url  support.apple.com/kb/DL1437 update for lion 10.7.1
    updates now work with this update
    Hope this helps
    Thanks

  • Software Update won't check for updates automatically

    Hello
    Since my update to Lion, the automated Software Update (Preferences -> Software Update) won't check automatically for updates, even if it's configurated to check daily. I can see this behaviour on different MacBooks with Lion.
    If I check manually, I'll get all necessary updates - but not automatically.
    Do you've an idea or the same issue?
    Thanks & Regards

    If your logged in as Standard User it won't check.

Maybe you are looking for

  • Photoshop Elements does not start under Windows Vista

    The Twain-Module of my Canon CanoScan FS4000US Filmscanner works only under Windows Vista (no newer OS!). Fortunately I own an older Notebook with Vista as OS, so I have PSE Version 5.0.2 installed and use it to import my old color negatives via the

  • I need two header line in table control

    Hi all, I am using table control. The requirement is to have 2 headers in the table control. for example., if their is field name ' Vendor Comments', I need to display 'Vendor' in one line and 'Comments' in next line. Is it possible to have such 2 he

  • How to deal with context dependant code lists?

    Hi ByD studio forum, recently one of the ByD solution partner raised an interesting questing regarding context dependant codelists. I create this thread to share the question and the answers (provided by Thomas Schneider) to it with the community. Mo

  • Adobe CS5 Compatibility Issues?

    Can anyone tell me if the Adobe CS5 suite works well under mountain lion? More specificatlly, InDesign, Photoshop, Dreamweaver and Illustrator. Thanks

  • Unhide mouse cursor

    Hi! I know how to hide the mouse cursor in Swing with the createCustomCursor() method. But, how can I unhide it after ? Thanks in advance