Software Update via Server Admin 10.5.1 not working.
I have a headless XServe running 10.5.1 that I control using Server Admin. Unfortunately, the feature to install updates via Server Admin doesn't seem to be working.
When I click Check Now, it says it is "Checking for new software", then stays for a bit on "scanning in progress". It then stops, and there's no updates listed.
When I use ARD to log into the machine and run Software Update there, there are updates to be installed.
Does anyone know why this isn't working?
I experienced this with a pre-release build from the past.
You didn't specify where the build came from. Is it possible that the Admin that gave you the disk gave you an older pre-release build?
These disks often came from bit torrents or the developer connection pre-release builds. Todays modern binaries are not compatible with the pre-release OS, so its typical to see the error messages that you have experienced.
If you used a genuine apple branded production build then you may want to try the update again as I've seen that the update servers go down from time to time.
Similar Messages
-
My iPad Air has the latest software version(iOS 7.1.2) update, since that update the location services have stopped working. have a solution?
I have had the same problem, so many apps do not work properly without it! Apple says the internet satellite, the Internet satellite says Apple, back and forth with the blame instead of fixing the problem. Have turned location on and off, reset everything multiple times ( lots of hours and bandwidth to download ), Siri is now working part time, I guess she has cut back her hours for the summer. Even in these forums was suggested to check with Skyhook who does the global positioning, and after hours with them, they ended up saying that they have nothing to do with it anymore, Apple does. All to no avail and much frustration! I wonder if this is happening with the iPhone's? i'd like to know if this is happening with others that do not use satellite as their ISP? That would help narrow down the argument with Apple vs. satellite. Fell for you! Someone please help us! Ta
-
Updated to server 10.7 status graphs not working
updated to server 10.7
in the server app under stats none of the graphs seem to work for processor usage, memory usage or network traffic. Anyone know how to fix this?So far the only solution I have been able to find has been launching the recovery partition and running disk repair. That will fix the problem until you trigger it again. Fortunately, or unfortunately, I have pinpointed what triggers it on my computer.
Seems to be a flaw in keychain access. When Safari's connection times out due to an expired certificate (common in university networks that require a log in every few hours), the security settings freak out and effectively shut down safari's ability to do anything. The fact that it attacks KeyChain access and iPhoto and more is just a really big system wide glitch. Here's the run down:
http://digit.algravitas.com/2011/10/major-networking-glitch-found-in-os-x-v10-7- 2/ -
Software update via desktop manager failed, phone will not boot
I used the Desktop Software (I had to update this first to version 6.00.43; anyway, that's what the Rim.Desktop.exe file properties in Windows Explorer says it is) to update my Curve 8900 's software. It went through the first two steps of downloading and installing; then just sat there stuck on the reboot step -- no kind of error message, just stuck, with phone displaying the AT&T sign on screen for probably a good chunk of lat night (started doing this a little before bed) and all through the day today. Only removing the battery will shut off the phone; once restarted, the white progress bar fills up over a number of minutes and goes back to the AT& screen again; hangup button will not shut the phone down. If I reconnect the USB and the Desktop Software is still running, status message continues to say "disconnected"; if I first connect the USB and then start the software, get a "connecting..." status message but it never connects. Windows 7 "Safely Remove Hardware" list does not display it.
Any way to fix this?
Bard55Close Desktop Manager.
Then do this:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
Then follow the instructions exactly in the first post of this thread to install the OS listed there.:
http://www.blackberryforums.com/general-8900-series-discussion-javelin/227412-os-8900-v5-0-0-1168-5-...
Once you have that done, then you can use Desktop manager to restore the backup file that the original update should have made.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
Till my last software update on my MacBook Air I have been able to use my iPhone as a modem via USB. Now it's not working anymore. Other functions via USB are still fine. Any ideas???
The Mac was recently upgraded so it is the Mac, or is it?
Looking for a common denominator: I'l start with wi-fi as the common communication medium.
Known:
A) Broken: iPhone —> wi-fi —> Mac.
B) Broken: iPhone —>USB—> Mac.
C) Broken: iPhone —> Bluetooth —> Mac.
D) Working: Mac —> USB —> other USB devices.
Unknowns:
E) Test Mac —> wi-fi —> a non-iPhone router.
F) Test iPhone —> wi-fi —> another wi-fi device.
Given not A, not B and not C either the Mac or the iPhone could be the culprit.
1) E | F : Non sequitur (deepens the mystery).
2) not E | F : The Mac is the common denominator.
3) E | not F : The iPhone is the common denominator.
4) not E | not F : All heck broke loose.
For case 1: It would be something on the Mac that prevents it talking to the iPhone through three media even though it can talk to other routers over wi-fi. That would be weird indeed, given the iPhone is talking to other wi-fi devices with no trouble.
For case 2: All of the Mac’s intranet media broken (wi-fi, Bluetooth, and wired-USB) and at least wi-fi works on the iPhone. Something weird is going on in the Mac.
For case 3: The iPhone router function is broken. Upgrade the iOS? Test using another iPhone?
For case 4: Throw everything in the trash and start over. -
while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?
Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808 -
I did the ios6 software update on my iphone and it did not complete because it said there was an error. It then gave me a message that I needed to restore my phone. When I tried to restore my backup it says it cannot be completed because there is not enough storage. I cant delete anything to make more storage because my phone is not usable because it wont restore. What do I do?
Something in your backup may be corrupt. Try wiping it and setting it up as a new device, then sync your apps, data and media back to it from iTunes. DO NOT resotre from your backup. If the problem is contained in the backup, it will bring it right back again if you restore.
-
Server Admin says Web service Not Available
The service status indicator is dark grey (not the dimmed grey of a service being off), and even the Settings view switch button is not showing.
However, Apache is running and serving just fine.
I had someone install Tomcat 5.0.28 today (using port :8080), and I really think that's related as the problem wasn't present until after this. This person unfortunately removed the built-in Tomcat and installed Tomcat 5 in its place (which we'll move tomorrow), but I'm wondering if there's some config settings or something that could be causing a conflict?
Or, maybe there's another reason altogether. What would make Server Admin think Apache is not even available, when in fact it is actually running just fine.
Thx for any ideas...
Xserve G5 DP 2.3GHz Mac OS X (10.4.4)The service status indicator is dark grey (not the dimmed grey of a service being off), and even the Settings view switch button is not showing.
However, Apache is running and serving just fine.
I had someone install Tomcat 5.0.28 today (using port :8080), and I really think that's related as the problem wasn't present until after this. This person unfortunately removed the built-in Tomcat and installed Tomcat 5 in its place (which we'll move tomorrow), but I'm wondering if there's some config settings or something that could be causing a conflict?
Or, maybe there's another reason altogether. What would make Server Admin think Apache is not even available, when in fact it is actually running just fine.
Thx for any ideas...
Xserve G5 DP 2.3GHz Mac OS X (10.4.4) -
I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, 3. View preferences in windows don't hold, etc. Anybody at Apple listening? Anybody else out there having these kinds of problems?
10.7 was horrible unstable so I waited until 10.7.1 and tried it again. Well I have to say that it is still a defective OS. I am reverting to Snow as we speak from my carbon clone copy.. This is really the worst OSX I have ever used. It gives me random Kernel panics for no reasons, unstable airport and hundreds of small issues that are just not necessary. For instance I can't use QuickTime in Lion to trim a videoclip ( the UI goes mad and the trimslider becomes inoperable and hangs the Player window ) while in Snow it is no problem. Itunes gives me crackling sound when the equalizer is turned on, Graphical glitches in Photoshop, games crashing, Preview.app not working with some pdfs, so I need Adobes reader which I never used before.. It is definately not ripe for mass usage. Might 10.7.2 or 10.7.3 fix it, but not yet.
* and just for the records : the hardware is absoltely ok. Because in Snow it works as it should. ( So many Lion fanbois are talking : "your Ram is defect", defintely NOT. - Lion is defect! ).
Shame on you Apple.
Message was edited by: Sjazbec -
HT1338 After a software update, how do I get my camera to work on my Mac Air?
After a software update, how do I get my camera to work on mu MacBook Air?
Launch the app that does what you want to do with the camera:
OS X Mavericks: Use your Mac computer’s built-in camera.
Message was edited by: EZ Jim
Mac OSX 10.9 -
cannot install itunes 7 because os 10.6.8 is needed. I select software update and the 10.6.8 is not available to be downloaded. I'm trying to load itunes to the iphone5
If you're using a PowerPC Mac, you can't.
If you're using an Intel Mac, phone the online Apple Store and order a Mac OS X 10.6 DVD.
If you don't know, choose About this Mac from the Apple menu.
(70291) -
I accidentally hit the install software update on my IPad and I am not by my computer and won't be for 2 weeks. Is there any way I can get my IPad off the picture of connecting to ITunes?
No. You must connect your iPad to a computer (it does not have to be yours) in order to restore it to factory settings.
Once you're home, you can restore it from a backup.
Any content that you did not backup has been lost.
~Lyssa -
prompted to update iTunes today and now it does not work. tried reinstalling and caanot successfully reinstall.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?
Has your problem been solved by the updates??
Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
Microsoft Office 2011: version 14.2.3
Mountain Lion: 10.8.2 (12C60) -
I am using iPhone 4S lock came from Japan. From beginning, it is IOS 5.1.1 but now i have updated to IOS 7 and it is not working anymore now. Can you tell me what i have to do now?
No Japanese carrier provides unlocking services. Therefore, your phone must have been hacked to unlock it. That hack was removed when you updated the software. You need to be a legitimately unlocked phone.
Best of luck.
Maybe you are looking for
-
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
I am encountering this 6502 error when running a report in Crystal Reports XI. I am connecting to Oracle Server. All the documentation I've read has said to update the UserSessionFormat property... how do I do that? Thanks in advance!
-
Remove fields from contact profile jabber windows
Is it possible remove some fields from the contac profile jabber windows? For example if you see the attach i want to remove entirely the field "compañia" (company). Thanks in advance.
-
/sapapo/vs01- Adding a feild to Output Dispaly
Hi, I have appended a field to the displaying structure:/SAPAPO/VSR_G_FUNIT,which displays the orders. I tried to change the filed catalog for that structure by deleting the indicator for NO_OUT = space & TECH = X, i made same as all other fields pro
-
Separating an album in 'Events'
I have an album with over 400 photos in it. How do I separate the album into multiple, so each is a different event?
-
hi im using oracle 9i on windows ...i export the sys schema.... i want to import to another database.. my queston is that before import to another database...can we create user or tablespace of old database. in new database....