Software updater configuration error

Hope somebody can help...
I tried to update my N95's firmware via the Nokia Software Updater.
It was downloading the file (about 135mb) just fine when an error occured after it downloaded around 80mb . I did not make note of the error unfortunately. Now when starting the NSU, the starting screen appears and idles for about 2 minutes. The updater will not start up and comes back with an message saying: "configuration error"
I have tried to uninstal and re-instal, uninstal and deleting remaining folders that are left behind but no luck. I also tried the port scanning thingy that Nokia suggested but could not find only closed ports on IP Address 127.0.0.1 between 62700-62750.
So the odd thing is that it worked fine at first and now won't even startup, No firewall settings were changed.
I would appreciate any suggestions
I run windows Vista home premium.
Thanks

Willowy wrote:
I know it's been a while, but I found another way to solve the annoying "configuration error" and I'd leave it here for someone else. Nokia tells you to turn off the Internet File Sharing in the FAQ of the NSU. Here it didn't work. So I decided if it is a network problem than I'd turn off the ICS. It worked and I didn't have to turn off any of my security software (firewall and antivirus). So.
Start menu > Execute (or use the Search box in the start menu of Windows Vista) > Services > Find ICS in the list of services  > Right mouse > Stop. Now NSU will find the new firmware.
Please turn on the ICS again after you finish the update.
Thanks man! This has been my problem for such a long time!

Similar Messages

  • "software update"  "An error occurred while checking for updates"

    When I click on "Software Update", an error results, "An error occurred while checking for updates".  It is definitely connected to the internet.  I was gifted a G5 and I installed a new hard drive and loaded the OS, OS X 10.3.5.  That version of Safari does not display pages correctly.  E.g., support.apple.com/downloads just clocks on the righthand side of the page.
    Because cannot access that link, cannot manually update the OS - I was thinking this version is "old" and as a result, unable to connect to apple's update server.  Thanks.

    Thanks,  I upgraded with your info.
    Ultimately, I am trying to access mail.google.com but receiving  the following error with opera v9.5.x: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
    Safari gives the following: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
    I can access ask.com and using opera to type this response.

  • How to troubleshoot Software Update Deployment Errors

    Hi Guys,
    Could you guys please help me to troubleshoot 'Software Update Deployment Errors'. I have been trying to troubleshoot the below mentioned errors but I am not sure what step should I take for each different errors.
    Could you guys please help me stating what kind of troubleshooting steps should we take for such update deployment errors.
    Many Thanks,
    Chandan

    You would have to examine client-side logs like UpdatesDeployment.log, U*.log in general, ScanAgent.log, WUAHandler.log, WindowsUpdate.log and CI*.log.
    Torsten Meringer | http://www.mssccmfaq.de

  • Software update shows error message iMac, Mac OS X (10.6.8)

    Why does software update show error message, reads check network connection when the network is connected? iMac, Mac OS X (10.6.8)

    solved

  • HT1338 Macbook Pro, OS X 10.8.1 when start software update receive error msg NSURLErrorDomain error -1100, pls advise what is this error and how to check software update?

    Macbook Pro, OS X 10.8.1 when start software update receive error msg NSURLErrorDomain error -1100, pls advise what is this error and how to check software update?
    Thank you, best regards
    Sergey

    Several users are reporting a server problem with Software Update. Why not wait and try again later today or tomorrow to see if the problem is resolved.
    If the problem is on your computer then give this a try:
    Fix for Software Update
    See Troubleshooting Automatic Software Update in Mac OS X.
    Delete the following files:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    /Home/Library/Preferences/com.apple.SoftwareUpdate.plist
    /Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist where "xxx" is a number.
    /Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder)

  • TS3694 i have dropped my iphone4 . i cant get to the software update the error has occured  wt can i do

    i have dropped my iphone4 . i cant get to the software update the error has occured  wt can i do for software update

    What is the exact wording of the error message received?

  • Software Updates Synchronization, error code 0X80131500

    Hello,
    I need some help to get the Software Updates Synchronization to work again.
    Some days ago the Software Updates Synchronization ended to work, with the error code 0X80131500.
    (I have cleaned out, and now only test with updates for Skype and Windows 8, normally we only use the Software Updates for third-party updates via Secunia CSI)
    In SMS_WSUS_SYNC_MANAGER, you will see the following error:
     WSUS Synchronization failed.
     Message: Failed to sync some of the updates.
     Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates.
    If I check the log wsyncmgr.log, I sees the following:
    Wakeup by inbox drop SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:31:18 10496 (0x2900)
    Found local sync request file SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:31:23 10496 (0x2900)
    Starting Sync SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:31:23 10496 (0x2900)
    Performing sync on local request SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:31:23 10496 (0x2900)
    Read SUPs from SCF for stocm.OURDOMAIN.local
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:23
    10496 (0x2900)
    Found 1 SUPs SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:31:23 10496 (0x2900)
    Found active SUP stocm.OURDOMAIN.local from SCF File.
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:23
    10496 (0x2900)
    STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=stocm.OURDOMAIN.local SITE=SOP PID=5264 TID=10496 GMTDATE=må jul 15 06:31:23.766 2013 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:23
    10496 (0x2900)
    Synchronizing WSUS server stocm.OURDOMAIN.local
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:25
    10496 (0x2900)
    STATMSG: ID=6704 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=stocm.OURDOMAIN.local SITE=SOP PID=5264 TID=10496 GMTDATE=må jul 15 06:31:25.025 2013 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:25
    10496 (0x2900)
    Using account SODERBERGPARTN\SCCMLocalAdmin to connect to WSUS Server
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:25
    10496 (0x2900)
    Synchronizing WSUS server stocm.OURDOMAIN.local ...
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:25
    11696 (0x2DB0)
    sync: Starting WSUS synchronization SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:31:25 11696 (0x2DB0)
    sync: WSUS synchronizing categories SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:31:31 11696 (0x2DB0)
    Done synchronizing WSUS Server stocm.OURDOMAIN.local
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:33
    11696 (0x2DB0)
    Sleeping 2 more minutes for WSUS server sync results to become available
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:31:33
    11696 (0x2DB0)
    Set content version of update source {A0A0CEF9-7800-4617-A320-D74A9E7BEB37} for site SOP to 589
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
    10496 (0x2900)
    Synchronizing SMS database with WSUS server stocm.OURDOMAIN.local
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
    10496 (0x2900)
    STATMSG: ID=6705 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=stocm.OURDOMAIN.local SITE=SOP PID=5264 TID=10496 GMTDATE=må jul 15 06:33:34.319 2013 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
    10496 (0x2900)
    Using account SODERBERGPARTN\SCCMLocalAdmin to connect to WSUS Server
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
    10496 (0x2900)
    Synchronizing SMS database with WSUS server stocm.OURDOMAIN.local ...
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
    10160 (0x27B0)
    sync: Starting SMS database synchronization
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
    10160 (0x27B0)
    requested localization languages: en,sv SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:33:34 10160 (0x27B0)
    Syncing all updates SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:33:34 10160 (0x27B0)
    Requested categories: Product=Windows 8, ProductFamily=Skype, UpdateClassification=Security Updates, UpdateClassification=Update Rollups, UpdateClassification=Service Packs, UpdateClassification=Tools, UpdateClassification=Feature Packs, UpdateClassification=Updates,
    UpdateClassification=Definition Updates, UpdateClassification=Critical Updates
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
    10160 (0x27B0)
    sync: SMS synchronizing categories SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:33:34 10160 (0x27B0)
    sync: SMS synchronizing categories, processed 0 out of 214 items (0%)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:34
    10160 (0x27B0)
    sync: SMS synchronizing categories, processed 214 out of 214 items (100%)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:36
    10160 (0x27B0)
    sync: SMS synchronizing categories, processed 214 out of 214 items (100%)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:36
    10160 (0x27B0)
    sync: SMS synchronizing updates SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:33:36 10160 (0x27B0)
    sync: SMS synchronizing updates, processed 0 out of 32 items (0%)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:38
    10160 (0x27B0)
    Synchronizing update 2489efa5-a44c-4157-9f65-db2cc4c272d7 - Security Update for Microsoft .NET Framework 3.5 on Windows 8 (KB2833959)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:38
    10160 (0x27B0)
    error 14: SQL Error Message Failed to generate documents:A .NET Framework error occurred during execution of user-defined routine or aggregate "fnGenerateLanternDocumentsTable": ~~System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnection'
    threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters'
    threw an exception. ---> System.MethodAccessException: Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.SwitchElementsCollection..ctor()' failed. ---> System.Security.SecurityException:
    Request failed.~~System.Security.SecurityException: ~~   at System.Security.CodeAccessSecurityEngine.ThrowSecurityException(RuntimeAssembly asm, PermissionSet granted, PermissionSet refused, RuntimeMethodHandleInternal rmh, SecurityAction action, Object
    demand, IPermission permThatFailed)~~   at System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet grants, PermissionSet refused, PermissionSet demands, RuntimeMethodHandleInternal rmh, Object assemblyOrString, SecurityAction action, Boolean
    throwException)~~   at System.Security.PermissionListSet.CheckSetDemandWithModification(PermissionSet pset, PermissionSet& alteredDemandSet, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.CheckSetDemand(PermissionSet
    pset, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet)~~   at System.Security.CodeAccessSecuri~~
    ...~~System.TypeInitializationException: ~~   at System.Data.SqlClient.SqlConnection..ctor()~~   at System.Data.SqlClient.SqlConnection..ctor(String connectionString)~~   at Microsoft.SystemsManagementServer.SQLCLR.Utilities.IsDesktopConfigurationItem(String
    ciAuthoringScopeId, String ciLogicalName, Int32 ciVersion)~~   at Microsoft.SystemsManage..., Digest:<DesiredConfigurationDigest xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/07/10/DesiredConfiguration"><SoftwareUpdate
    AuthoringScopeId="Site_A0A0CEF9-7800-4617-A320-D74A9E7BEB37" LogicalName="SUM_6c9323cb-22d6-4bdb-8309-9ed6ded8bce2" Version="202"><Annotation xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/06/14/Rules"><DisplayName
    Text=""/><Description Text=""/></Annotation><ConfigurationMetadata SmsUniqueIdentity="6c9323cb-22d6-4bdb-8309-9ed6ded8bce2" Version="202"><Provider SourceType="default"><Operation
    Name="Detect"><Parameter Name="ScanTool"><Property Name="ScanToolId" Value="{A0A0CEF9-7800-4617-A320-D74A9E7BEB37}"/><Property Name="MinCatalogVersion" Value="590"/></Parameter></Operation><Operation
    Name="Install"><Content ContentId="6c9323cb-22d6-4bdb-8309-9ed6ded8bce2" Version="1"><FileContent Name="windows8-rt-kb2833959-x86.cab" Size="6429955" Signed="true" Hash="A37A1D40B0581FDC6EC0E5FB1DC04EE84AD7FC52"
    HashAlgorithm="SHA1" SourceURL="http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2013/05/windows8-rt-kb2833959-x86_a37a1d40b0581fdc6ec0e5fb1dc04ee84ad7fc52.cab"/></Content><Parameter Name="CommandLine"><Property
    Name="CommandLine" Value="/WUSInstaller /UpdateID:6c9323cb-22d6-4bdb-8309-9ed6ded8bce2"/></Parameter><Parameter Name="RequiresExclusiveHandling"><Property Name="RequiresExclusiveHandling" Value="False"/></Parameter></Operation></Provider></ConfigurationMetadata></SoftwareUpdate></DesiredConfigurationDigest>
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:46
    10160 (0x27B0)
    Failed to sync update 2489efa5-a44c-4157-9f65-db2cc4c272d7. Error: Failed to save update 6c9323cb-22d6-4bdb-8309-9ed6ded8bce2. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:46
    10160 (0x27B0)
    Synchronizing update 2a50d8b7-4c3f-4a67-b5ed-8054af0e2409 - Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2832418)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:46
    10160 (0x27B0)
    error 14: SQL Error Message Failed to generate documents:A .NET Framework error occurred during execution of user-defined routine or aggregate "fnGenerateLanternDocumentsTable": ~~System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnection'
    threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters'
    threw an exception. ---> System.MethodAccessException: Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.SwitchElementsCollection..ctor()' failed. ---> System.Security.SecurityException:
    Request failed.~~System.Security.SecurityException: ~~   at System.Security.CodeAccessSecurityEngine.ThrowSecurityException(RuntimeAssembly asm, PermissionSet granted, PermissionSet refused, RuntimeMethodHandleInternal rmh, SecurityAction action, Object
    demand, IPermission permThatFailed)~~   at System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet grants, PermissionSet refused, PermissionSet demands, RuntimeMethodHandleInternal rmh, Object assemblyOrString, SecurityAction action, Boolean
    throwException)~~   at System.Security.PermissionListSet.CheckSetDemandWithModification(PermissionSet pset, PermissionSet& alteredDemandSet, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.CheckSetDemand(PermissionSet
    pset, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet)~~   at System.Security.CodeAccessSecuri~~
    ...~~System.TypeInitializationException: ~~   at System.Data.SqlClient.SqlConnection..ctor()~~   at System.Data.SqlClient.SqlConnection..ctor(String connectionString)~~   at Microsoft.SystemsManagementServer.SQLCLR.Utilities.IsDesktopConfigurationItem(String
    ciAuthoringScopeId, String ciLogicalName, Int32 ciVersion)~~   at Microsoft.SystemsManage..., Digest:<DesiredConfigurationDigest xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/07/10/DesiredConfiguration"><SoftwareUpdate
    AuthoringScopeId="Site_A0A0CEF9-7800-4617-A320-D74A9E7BEB37" LogicalName="SUM_0a75ed46-8be8-416d-8899-68dc6aea56e5" Version="203"><Annotation xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/06/14/Rules"><DisplayName
    Text=""/><Description Text=""/></Annotation><ConfigurationMetadata SmsUniqueIdentity="0a75ed46-8be8-416d-8899-68dc6aea56e5" Version="203"><Provider SourceType="default"><Operation
    Name="Detect"><Parameter Name="ScanTool"><Property Name="ScanToolId" Value="{A0A0CEF9-7800-4617-A320-D74A9E7BEB37}"/><Property Name="MinCatalogVersion" Value="590"/></Parameter></Operation><Operation
    Name="Install"><Content ContentId="0a75ed46-8be8-416d-8899-68dc6aea56e5" Version="1"><FileContent Name="windows8-rt-kb2832418-x64.cab" Size="6031583" Signed="true" Hash="5527FCE8AC04F289CFBAF42619CA25648577012F"
    HashAlgorithm="SHA1" SourceURL="http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2013/05/windows8-rt-kb2832418-x64_5527fce8ac04f289cfbaf42619ca25648577012f.cab"/></Content><Parameter Name="CommandLine"><Property
    Name="CommandLine" Value="/WUSInstaller /UpdateID:0a75ed46-8be8-416d-8899-68dc6aea56e5"/></Parameter><Parameter Name="RequiresExclusiveHandling"><Property Name="RequiresExclusiveHandling" Value="False"/></Parameter></Operation></Provider></ConfigurationMetadata></SoftwareUpdate></DesiredConfigurationDigest>
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
    10160 (0x27B0)
    Failed to sync update 2a50d8b7-4c3f-4a67-b5ed-8054af0e2409. Error: Failed to save update 0a75ed46-8be8-416d-8899-68dc6aea56e5. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
    10160 (0x27B0)
    Synchronizing update 2223c30d-27f0-43d6-bcf7-52d3fc7bd83d - Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2833959)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
    10160 (0x27B0)
    error 14: SQL Error Message Failed to generate documents:A .NET Framework error occurred during execution of user-defined routine or aggregate "fnGenerateLanternDocumentsTable": ~~System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnection'
    threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters'
    threw an exception. ---> System.MethodAccessException: Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.SwitchElementsCollection..ctor()' failed. ---> System.Security.SecurityException:
    Request failed.~~System.Security.SecurityException: ~~   at System.Security.CodeAccessSecurityEngine.ThrowSecurityException(RuntimeAssembly asm, PermissionSet granted, PermissionSet refused, RuntimeMethodHandleInternal rmh, SecurityAction action, Object
    demand, IPermission permThatFailed)~~   at System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet grants, PermissionSet refused, PermissionSet demands, RuntimeMethodHandleInternal rmh, Object assemblyOrString, SecurityAction action, Boolean
    throwException)~~   at System.Security.PermissionListSet.CheckSetDemandWithModification(PermissionSet pset, PermissionSet& alteredDemandSet, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.CheckSetDemand(PermissionSet
    pset, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet)~~   at System.Security.CodeAccessSecuri~~
    ...~~System.TypeInitializationException: ~~   at System.Data.SqlClient.SqlConnection..ctor()~~   at System.Data.SqlClient.SqlConnection..ctor(String connectionString)~~   at Microsoft.SystemsManagementServer.SQLCLR.Utilities.IsDesktopConfigurationItem(String
    ciAuthoringScopeId, String ciLogicalName, Int32 ciVersion)~~   at Microsoft.SystemsManage..., Digest:<DesiredConfigurationDigest xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/07/10/DesiredConfiguration"><SoftwareUpdate
    AuthoringScopeId="Site_A0A0CEF9-7800-4617-A320-D74A9E7BEB37" LogicalName="SUM_393a2161-b85d-439e-9038-7fc7befaeed0" Version="202"><Annotation xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/06/14/Rules"><DisplayName
    Text=""/><Description Text=""/></Annotation><ConfigurationMetadata SmsUniqueIdentity="393a2161-b85d-439e-9038-7fc7befaeed0" Version="202"><Provider SourceType="default"><Operation
    Name="Detect"><Parameter Name="ScanTool"><Property Name="ScanToolId" Value="{A0A0CEF9-7800-4617-A320-D74A9E7BEB37}"/><Property Name="MinCatalogVersion" Value="590"/></Parameter></Operation><Operation
    Name="Install"><Content ContentId="393a2161-b85d-439e-9038-7fc7befaeed0" Version="1"><FileContent Name="windows8-rt-kb2833959-x64.cab" Size="11789251" Signed="true" Hash="8150A8E8BD5CC80D396C628BD55E94A8BA2DC0B4"
    HashAlgorithm="SHA1" SourceURL="http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2013/05/windows8-rt-kb2833959-x64_8150a8e8bd5cc80d396c628bd55e94a8ba2dc0b4.cab"/></Content><Parameter Name="CommandLine"><Property
    Name="CommandLine" Value="/WUSInstaller /UpdateID:393a2161-b85d-439e-9038-7fc7befaeed0"/></Parameter><Parameter Name="RequiresExclusiveHandling"><Property Name="RequiresExclusiveHandling" Value="False"/></Parameter></Operation></Provider></ConfigurationMetadata></SoftwareUpdate></DesiredConfigurationDigest>
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
    10160 (0x27B0)
    Failed to sync update 2223c30d-27f0-43d6-bcf7-52d3fc7bd83d. Error: Failed to save update 393a2161-b85d-439e-9038-7fc7befaeed0. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
    10160 (0x27B0)
    Synchronizing update 0eec7b70-2ba5-46cc-8d57-d9ca1f9cb309 - Security Update for Microsoft .NET Framework 3.5 on Windows 8 x86 (KB2832418)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:47
    10160 (0x27B0)
    error 14: SQL Error Message Failed to generate documents:A .NET Framework error occurred during execution of user-defined routine or aggregate "fnGenerateLanternDocumentsTable": ~~System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnection'
    threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters'
    threw an exception. ---> System.MethodAccessException: Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.SwitchElementsCollection..ctor()' failed. ---> System.Security.SecurityException:
    Request failed.~~System.Security.SecurityException: ~~   at System.Security.CodeAccessSecurityEngine.ThrowSecurityException(RuntimeAssembly asm, PermissionSet granted, PermissionSet refused, RuntimeMethodHandleInternal rmh, SecurityAction action, Object
    demand, IPermission permThatFailed)~~   at System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet grants, PermissionSet refused, PermissionSet demands, RuntimeMethodHandleInternal rmh, Object assemblyOrString, SecurityAction action, Boolean
    throwException)~~   at System.Security.PermissionListSet.CheckSetDemandWithModification(PermissionSet pset, PermissionSet& alteredDemandSet, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.CheckSetDemand(PermissionSet
    pset, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet)~~   at System.Security.CodeAccessSecuri~~
    ...~~System.TypeInitializationException: ~~   at System.Data.SqlClient.SqlConnection..ctor()~~   at System.Data.SqlClient.SqlConnection..ctor(String connectionString)~~   at Microsoft.SystemsManagementServer.SQLCLR.Utilities.IsDesktopConfigurationItem(String
    ciAuthoringScopeId, String ciLogicalName, Int32 ciVersion)~~   at Microsoft.SystemsManage..., Digest:<DesiredConfigurationDigest xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/07/10/DesiredConfiguration"><SoftwareUpdate
    AuthoringScopeId="Site_A0A0CEF9-7800-4617-A320-D74A9E7BEB37" LogicalName="SUM_0979de90-24e7-46e7-862f-febf7a8a6348" Version="202"><Annotation xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/06/14/Rules"><DisplayName
    Text=""/><Description Text=""/></Annotation><ConfigurationMetadata SmsUniqueIdentity="0979de90-24e7-46e7-862f-febf7a8a6348" Version="202"><Provider SourceType="default"><Operation
    Name="Detect"><Parameter Name="ScanTool"><Property Name="ScanToolId" Value="{A0A0CEF9-7800-4617-A320-D74A9E7BEB37}"/><Property Name="MinCatalogVersion" Value="590"/></Parameter></Operation><Operation
    Name="Install"><Content ContentId="0979de90-24e7-46e7-862f-febf7a8a6348" Version="1"><FileContent Name="windows8-rt-kb2832418-x86.cab" Size="4313255" Signed="true" Hash="485B6961AC836D2D6C047D4A63299D98C4B44542"
    HashAlgorithm="SHA1" SourceURL="http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2013/05/windows8-rt-kb2832418-x86_485b6961ac836d2d6c047d4a63299d98c4b44542.cab"/></Content><Parameter Name="CommandLine"><Property
    Name="CommandLine" Value="/WUSInstaller /UpdateID:0979de90-24e7-46e7-862f-febf7a8a6348"/></Parameter><Parameter Name="RequiresExclusiveHandling"><Property Name="RequiresExclusiveHandling" Value="False"/></Parameter></Operation></Provider></ConfigurationMetadata></SoftwareUpdate></DesiredConfigurationDigest>
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:48
    10160 (0x27B0)
    Failed to sync update 0eec7b70-2ba5-46cc-8d57-d9ca1f9cb309. Error: Failed to save update 0979de90-24e7-46e7-862f-febf7a8a6348. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:48
    10160 (0x27B0)
    Synchronizing update 6bac21e0-8b77-47f2-a8d8-d80026de4e6d - Security Update for Microsoft .NET Framework 4.5 on Windows 8 (KB2833958)
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:48
    10160 (0x27B0)
    error 14: SQL Error Message Failed to generate documents:A .NET Framework error occurred during execution of user-defined routine or aggregate "fnGenerateLanternDocumentsTable": ~~System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnection'
    threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters'
    threw an exception. ---> System.MethodAccessException: Attempt by method 'System.Configuration.TypeUtil.CreateInstanceRestricted(System.Type, System.Type)' to access method 'System.Diagnostics.SwitchElementsCollection..ctor()' failed. ---> System.Security.SecurityException:
    Request failed.~~System.Security.SecurityException: ~~   at System.Security.CodeAccessSecurityEngine.ThrowSecurityException(RuntimeAssembly asm, PermissionSet granted, PermissionSet refused, RuntimeMethodHandleInternal rmh, SecurityAction action, Object
    demand, IPermission permThatFailed)~~   at System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet grants, PermissionSet refused, PermissionSet demands, RuntimeMethodHandleInternal rmh, Object assemblyOrString, SecurityAction action, Boolean
    throwException)~~   at System.Security.PermissionListSet.CheckSetDemandWithModification(PermissionSet pset, PermissionSet& alteredDemandSet, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.CheckSetDemand(PermissionSet
    pset, RuntimeMethodHandleInternal rmh)~~   at System.Security.PermissionListSet.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet)~~   at System.Security.CodeAccessSecuri~~
    ...~~System.TypeInitializationException: ~~   at System.Data.SqlClient.SqlConnection..ctor()~~   at System.Data.SqlClient.SqlConnection..ctor(String connectionString)~~   at Microsoft.SystemsManagementServer.SQLCLR.Utilities.IsDesktopConfigurationItem(String
    ciAuthoringScopeId, String ciLogicalName, Int32 ciVersion)~~   at Microsoft.SystemsManage..., Digest:<DesiredConfigurationDigest xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/07/10/DesiredConfiguration"><SoftwareUpdate
    AuthoringScopeId="Site_A0A0CEF9-7800-4617-A320-D74A9E7BEB37" LogicalName="SUM_a8891461-32fe-450f-8585-1b5ffbd91788" Version="202"><Annotation xmlns="http://schemas.microsoft.com/SystemsCenterConfigurationManager/2009/06/14/Rules"><DisplayName
    Text=""/><Description Text=""/></Annotation><ConfigurationMetadata SmsUniqueIdentity="a8891461-32fe-450f-8585-1b5ffbd91788" Version="202"><Provider SourceType="default"><Operation
    Name="Detect"><Parameter Name="ScanTool"><Property Name="ScanToolId" Value="{A0A0CEF9-7800-4617-A320-D74A9E7BEB37}"/><Property Name="MinCatalogVersion" Value="590"/></Parameter></Operation><Operation
    Name="Install"><Content ContentId="a8891461-32fe-450f-8585-1b5ffbd91788" Version="1"><FileContent Name="windows8-rt-kb2833958-x86.cab" Size="7255481" Signed="true" Hash="F88D2B25DC19094E48A3AF0D34202CE6861E4644"
    HashAlgorithm="SHA1" SourceURL="http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2013/05/windows8-rt-kb2833958-x86_f88d2b25dc19094e48a3af0d34202ce6861e4644.cab"/></Content><Parameter Name="CommandLine"><Property
    Name="CommandLine" Value="/WUSInstaller /UpdateID:a8891461-32fe-450f-8585-1b5ffbd91788"/></Parameter><Parameter Name="RequiresExclusiveHandling"><Property Name="RequiresExclusiveHandling" Value="False"/></Parameter></Operation></Provider></ConfigurationMetadata></SoftwareUpdate></DesiredConfigurationDigest>
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10160 (0x27B0)
    Failed to sync update 6bac21e0-8b77-47f2-a8d8-d80026de4e6d. Error: Failed to save update a8891461-32fe-450f-8585-1b5ffbd91788. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10160 (0x27B0)
    Too many consecutive failures. Aborting sync.
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10160 (0x27B0)
    Sync failures summary: SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:33:49 10160 (0x27B0)
    Failed to sync update 2a50d8b7-4c3f-4a67-b5ed-8054af0e2409. Error: Failed to save update 0a75ed46-8be8-416d-8899-68dc6aea56e5. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10160 (0x27B0)
    Failed to sync update 6bac21e0-8b77-47f2-a8d8-d80026de4e6d. Error: Failed to save update a8891461-32fe-450f-8585-1b5ffbd91788. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10160 (0x27B0)
    Failed to sync update 0eec7b70-2ba5-46cc-8d57-d9ca1f9cb309. Error: Failed to save update 0979de90-24e7-46e7-862f-febf7a8a6348. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10160 (0x27B0)
    Failed to sync update 2223c30d-27f0-43d6-bcf7-52d3fc7bd83d. Error: Failed to save update 393a2161-b85d-439e-9038-7fc7befaeed0. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10160 (0x27B0)
    Failed to sync update 2489efa5-a44c-4157-9f65-db2cc4c272d7. Error: Failed to save update 6c9323cb-22d6-4bdb-8309-9ed6ded8bce2. CCISource error: 14. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10160 (0x27B0)
    Sync failed: Failed to sync some of the updates. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10496 (0x2900)
    STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=stocm.OURDOMAIN.local SITE=SOP PID=5264 TID=10496 GMTDATE=må jul 15 06:33:49.449 2013 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates"
    ISTR1="Failed to sync some of the updates" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10496 (0x2900)
    Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:33:49 10496 (0x2900)
    Setting sync alert to active state on site SOP
    SMS_WSUS_SYNC_MANAGER 2013-07-15 08:33:49
    10496 (0x2900)
    Sync time: 0d00h02m25s SMS_WSUS_SYNC_MANAGER
    2013-07-15 08:33:49 10496 (0x2900)
    Environment:
    Windows Server 2008 R2 (fully updated)
    System Center Configuration Manager 2012 SP1 CU2
    SQL Server 2008 (fully updated)
    wsyncmgr.log are here: http://sdrv.ms/1bBxYRj
      

    I observed a similar error in a topology that had a CAS and 2 primary child sites.  The CAS seemed to update without issue, but the primary server reported 0X80131500.  I was not able to locate the SMSSQLCLR
    node in any of the 3 site databases.  It appears that some updates worked but at 10% it failed:
    In my case, I restarted the child site SUP and forced sync on the CAS again.  It seems to be doing better now.  This might have just been an intermittent error...
    Mike Crowley | MVP
    My Blog --
    Planet Technologies

  • Software update - networking error (Mac OS 10.4.11)

    Hi everyone,
    I've been having problems running software update on my 867 MHz Powerbook G4. Every time I try to run software update, I get the same message: "A networking error has occurred: timed out (-1001). Make sure you can connect to the Internet, then try again."
    I'm using Mac OS X 10.4.11.
    My network is running fine, and I've run Network Diagnostics several times fully through to confirm this.
    I've tried repairing the disk permissions through disk utility a few times, and nothing's changed.
    I tried copying three files from my Library / Preferences folder, along with my Caches folder (after reading that this could fix the problem), but still, software update doesn't work.
    I tried running the 10.4.11 combo update for PPC, rebooted in safe mode, and repaired my disk permissions again, but still, no luck.
    There's another problem that might be related: Safari can't load pages. Firefox 2.0.0.18 works fine, but Safari doesn't do anything. Also, closing the Safari window (Ctrl + W) doesn't work, quitting the program is the only way to make it go away.
    Thanks in advance for the help, it's much appreciated!

    Hi James, and a warm welcome to the forums!
    To expand a bit on Sig's great advice...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    Also, how much free space do you have on your HDD?

  • Software update unexpected error on installation

    I was updating with the latest combo updater to 10.4.11 from 10.4.8, and iphoto 6.0.6 and backup 3.1.2 and I get a message that an error occurred and the software couldn't be installed. Quit software update and try from Finder. I did with same results. Used disk utility to repair permissions and no luck.
    Even if I just try to install one of the three I get the same results. Have 2.1Gb available disc space.
    Any ideas?

    Hi.
    You say you have 2.1 Gb free, but, what's the size of your hard drive? Less than 15% of free space on your hd is a recipe for disaster in OS X.
    If there's less than 15% of free space, then you should transfer or delete files in order to free up space beyond the 15%, and also clear the Software Update cache by moving to the Desktop or trashing these two directories:
    /Library/Caches/com.apple.SoftwareUpdate
    /Users/youruserfolder/Library/Caches/com.apple.SoftwareUpdate
    and launching Software Update again.
    Good Luck.
    Good Luck.
    If your

  • ...my mac mini is 2010 version. Upgraded to OSX 10.8.2 Mountain Lion. I can't download software updates. Error message: NSURLErrorDomain error - 1012. What Can I do ?

    I can't access the software updates available. I'm getting the message: (NSURLErrorDomain error-1012.).
    What can I do to find resolution to the problem?

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • Help - Software Updates has error, "No repository found"

    I just launched Flash Builder 4.7 (latest version) for the first time and went to Help -> Software Updates and get this error.
    "'Contacting Software Sites' has encountered a problem. No repository found at http://aesplugins.adobe.com/aes/tooling/plugin/10.0."
    Really sloppy, Adobe. Put this in your QA checklist!!

    So agree! Cobwebs are gathering fast on FB.

  • Software update reads "error" on my PC. How do I get the software?

    I want to update my IPhone 4 but the software update window says "error." To correct this I need to go to "Tools>Download Only." Where is the "Tools" tag? How can I get the software update?

    Connect your iPad to your computer and launch iTunes. If you auto sync, let the process complete. Then click on your iPad name on the left side bar under the Devices heading and click on the Music Tab in the iTunes window at the top on the right. Select the album - click on the box next to the Album name, (make sure the heading -Sync Music is checked) and then click Apply in the lower right corner of the iTunes window.
    That should sync the album to the iPad and look for it in the iPod or Music App, depending on which iOS you are running.

  • Software update installer - Error 1720

    Hi. Anyone else unable to install the Software Updater on XP Professional SP2?
    "Error 1720: There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contat your support personnel or package vendor. Custom actino Kill_process error -2147217407, : Line 5, Column 1, "
    Thanks!
    Greg

    I had the same error when trying to run software updater - turned out to be corrupt repository:
    To fix a corrupted WMI repository, you have to reinstall WMI. Follow these steps:
    For Windows XP Service Pack 2
    Click Start, Run and type the following command:
    rundll32 wbemupgd, UpgradeRepository
    This command is used to detect and repair a corrupted WMI Repository. The results are stored in the setup.log (%windir%\system32\wbem\logs\setup.log) file.
    For further info please do Internet search on WMI repository

  • 10.4.6 Software Update Install Error

    After downloading the 10.4.6 update using Software update on an iBook G4 (1.42 GHz, 1 GB DDR SDRAM, OS X 10.4.5) and pressing the "Install" button, I recieve this error:
    "The update cannot be installed: The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by Apple."
    I have attempted to install this update multiple times - first over a wifi connection, later on a wired ethernet connection. The package Software Update is downloading obviously contains the correct signature, as it is the same data downloaded and installed by many other OS X users, without a hitch.
    Instead, I think the part of OS X that checks for the digital signature is somehow corrupted or otherwise invalid. Where is this component located? Is it something I can fix myself?
    I could be entirely wrong, though. Any information would be much appreciated.

    hi Spook_y, Welcome to Apple Discussions.
    Sorry to hear of your problem.
    Instead, I think the part of OS X that checks for the digital signature is somehow corrupted or otherwise invalid. Where is this component located? Is it something I can fix myself?
    I can not answer these questions, however if i were you I would dump that one download and follow a brodys advice in his Topic:
    Now that 10.4.6 is out, let's review the upgrade steps
    a brody's to update.
    I followed this advice, including restarting twice and i have no issues, at all.
    Good luck
    Hope this helps.
    Please keep us posted~ Eme
     Power PC G4 (3.3) ♥ iMac Flat Panel 10.3.9 ] 15 Alum.PowerBook Tiger   Mac OS X (10.4.6)   AEBS & iMac G5 Dual Intel
    Message was edited by: Eme

  • "Can't connect to iPad Software Update Server" Error. How Can I Fix This?

    I keep getting an error saying, "The iPad cannot be updated at this time because the iPad software update server could not be contacted or in temporarily unavailable.", whenever I try to update to 3.2.2 or restore my iPad. This has been happening for a couple of months now. Can someone please help me!? Apple only addresses this issue for Windows. And have searched all of google and can't find anything.

    Ahha! I have just overcome this problem myself.
    Being a highly tech savvy I immediatly assumed that this was a most complex and difficult problem to overcome. So naturally I started looking at things like port 80 and internet proxy options.
    But alas, it was my anti-virus which caused this error! A most dispicable fiend.
    Solution:
    I have Avast anti-virus so I will tell you how I disabled mine.
    Open up the program and its friendly user interface, go to Settings at the top. In the newly opened Settings window go to the left and chose Troubleshoot from the nice little list at the bottom and then in the check box area that has appeared uncheck the Avast defence module. Now hit OK / APPLY.
    Now you may close Avast completely. (Since exitting out only hides it in the background)
    Hit control+alt+delete and open the Task panel.
    Scroll across from programs -> processes,
    Now find the AvastUI.exe or something along those lines and end that process.
    Avast! It is now closed! and you may Restore/Update at will!

Maybe you are looking for

  • Bus2014 Work flow display problem

    Hi Folks, In my work flow I am using BUS2014, when I am trying to interpet the process for decison step, the process should display the purchase contracts, In some users its diaplaying and in some users its not displaying even though the same authori

  • Create OPC I/O server and front panel data socket problem

    Hi all! I installed the NI OPC server. When I try to create a new server I/O in a LabVIEW project I don't see the "OPC client" possibility. Is something software missing?  Other question: I tryed to connect to OPC server using front panel data socket

  • Laptop to TV display

    I have never had any particular issue with switching display from T61 to HD TV but now when I click Fn Space switch resolution instead of switch between displays.  (using monitor plug connection}.  I have tried adjusting display settings and just see

  • Oracle BPA suite NOT WORKING

    I download BPA suite today and installed in Window XP. But when I click create new model and group, it goes on starting standard database and error saying "unable to run local business server" What am I doing wrong or what I have to do to rectify thi

  • Incremental backup, can earliest dates be deleted?

    We are backing up incrementally to a 500GB external drive that now is completely full. We backup daily using Apple Backup software, not Time Machine. Is it valid to delete the earliest dates from the backup drive creating new space? If not, what do p