Software Updates Error Message 3072?

Recently when I get a notice to update software or apps, I click "Update" and get a message that says "An error occured. The operation was cancelled. (3072)" Does anyone know what this means and how I can get my software to update? Thanks.

You're trying to update an application that's running, perhaps in another account.

Similar Messages

After software updates - error message- system extensions are not valid

Every time now after installing SL, when apple update installs new software, an error message comes up - system extensions not valid, reinstall or ask the system administrator. it then goes through each extension that is wrong. it appears a lot of them are from oct 2007. What do I do about this?

here are the extensions: most of them that sya are installed incorrectly
AppleK2SATARoot.kext
AppleMPIC.kext
ATIRadeon8500GA.plugin
ATIRadeon9700GA.plugin
ATIRadeonGA.plugin
ATIRadeonGLDriver.bundle
ATIRadeon8500GLDriver.bundle
ATIRadeon9700GLDriver.bundle
GeForce2MXGLDriver.bundle
GeForce3GLDriver.bundle
GeForceFXGLDriver.bundle
ATIRadeonDVDDriver.bundle
AppleAltiVecDVDDriver.bundle
ATIRadeon8500DVDDriver.bundle
ATIRadeon9700DVDDriver.bundle
ATIRadeon8500VADriver.bundle
ATIRadeon9700VADriver.bundle
ATIRadeon.kext
ATIRadeon8500.kext
ATIRadeon9700.kext
NVDANV10Hal.kext
NVDANV20Hal.kext
NVDANV30Hal.kext
AppleNDRV
ATINDRV.kext
ATIRNDRV.kext
AudioDeviceTreeUpdater.kext
AppleDallasDriver.kext
IOI2CFamily.kext
IOI2CControllerPMU.kext
IOI2CControllerSMU.kext
IOI2CControllerPPC.kext
zfs.readonly.kext
IOPCCardFamily.kext
IOPlatformFunction.kext
AppleMacRISC2PE.kext
IOI2CPulsar.kext
IOI2CCPUVoltage.kext
IOI2CHWClock.kext
IOI2CSlewClock.kext
AppleHWClock.kext
AppleMaxim6690.kext
AppleMaxim1989.kext
AppleLM7x.kext
AppleLM8x.kext
AppleSMUMonitor.kext
IOI2CMaxim1989.kext
IOI2CMaxim6690.kext
IOI2CAD741x.kext
IOI2CLM6x.kext
IOI2CLM7x.kext
IOI2CLM8x.kext
IOI2CSMUSat.kext
IOI2CMaxim1631.kext
AppleI2S.kext
AppleMacRiscPCI.kext
IOI2CDeviceLMU.kext
AppleLMUController.kext
AppleMacRISC4PE.kext
AppleMediaBay.kext
seatbelt.kext
AppleSym8xx.kext
AppleThermal.kext
AppleCore99NVRAM.kext
AppleVSP.kext
ApplePCCard16ATA.kext
KeyLargoATA.kext
IOADBFamily.kext
ApplePCCardATA.kext
AppleLED.kext
AppleK2SATA.kext
AppleKiwiRoot.kext
AppleKiwiATA.kext
AppleI2SModemFamily.kext
AppleFlashNVRAM.kext
AppleVIA.kext
AppleFPButton.kext
PMUMotionSensor.kext
IOI2CMotionSensor.kext
IOI2CDeviceFCU.kext
AppleFCU.kext
AppleI2C.kext
AppleKauaiATA.kext
AppleKeyLargo.kext
AppleK2.kext
AppleK2Driver.kext
IOKeyLargo.kext
AppleSPU.kext
ApplePMU.kext
CMD646Root.kext
AppleSMU.kext
MacIOGPIO.kext
I2CGPIO.kext
IOI2CDriveBayGPIO.kext
AppleGPIO.kext
AppleK2Fan.kext
IOI2CADT746x.kext
AppleFan.kext
VirtualAudioDriver.kext
AppleLM87.kext

IPod software update - error message??

Dear All,
When I try to download an install the latest software (1.2.1) update for my iPod, then this error message appears (translated from danish):
'There was a problem downloading iPod-software to iPod "xxxxxxxxxxxxxx". An unknown error occurred (-3234).
What to do?
- I have tried to disable firewall and other anti-xxx while trying, but the same happens.
Please help.
Regards and a merry XMas
MJKH
iPod 30GB Windows XP

Try here:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Software Update error message

I'm running Panther 10.3.9 and when I did the Security Update this morning, after the restart I got an error message that said: System extension cannot be used. The system extension
"/System/Library/Extensions/dfe530txp.kext" was installed improperly and cannot be used. Please try reinstalling it or contact the product's vendor for an update.
That's happened almost every time I did the security update for months, but I didn't know what it meant or what to do about it so I've ignored it until now.
However, I have my new Tiger disks and I want to update from Panther to Tiger today and thought if this had to be addressed first I'd better ask about it. Perhaps updating to Tiger will take care of it?
Also should I run disk utility on my 10.3.9 first?
I will ask some questions about actually installing my Tiger in separate questions But should I be asking the update installation questions in the 10.3.9 section or the 10.4.6 section?
I'm no whiz kid and really don't want to goof things up.

Well Cornelius - how I wish I had listened to you. Upshot of a long afternoon, including 2-1/2 hrs on phone with applecare is that I cannot open my OS X. The last thing I did at their suggestion was an archive and install again - but they of course were closing and couldn't stay on the phone until it got thru. They gave me a case number and I'll be calling them again tomorrow because the 2nd install was like the first. It wouldn't open.
What happened is that everything appeared to be going well. The install checked the install disk. It checked my target disk. It did the easy install as I'd said. It got through, the little blue bar was full, it said it would restart in 30 seconds - or some such. I saw the restart button. It was pulsating. The screen went black, came back on with it's bong. But then there was no "ping" that I usually here. Got a gray screen - first with an apple in the center and the little cog wheel under it going round and round. Then the apple changed to a circle with a line thru it. It kept going and going and going - - nowhere - for 15 minutes I kept my fingers crossed.
I gave up and called them. Went from person to person to person (two segments of 15 minutes wait in between the first two). The third person had me:
Turn off the power to the computer. Turn it back on. Nothing different.
Unplug everything from the back of the computer. ethernet cords, usbs, firewire, monitor, hub - everything. Waited a minute and plugged it all back in.
Tried starting with holding down the apple option P R.
Tried starting holding down just the option.
Turned it off again and turned off the power for awhile. Started it again and my gosh - it started up in OS 9! I haven't been in there forever. I went under the apple to control panel to startup disk. The os 9, os X (which did at that point show version 10.4.6), ox X install disk. I selected my OS X and hit restart.
It restarted - and did the same thing.
At one point - don't remember what we did before that, the three icons were up together. Two arrows under them - one kind of in a circle, the other pointing straight to the right. The install icon and os 9 icon were light. The os X had a dark background. Tried to click on it. Nothing. Tried to click on the os x install disk - it turned dark and my x turned light.... until I clicked on it again at which time they reversed.
Shut down again and started up from the install disk holding down the C. He had me pull up the disk utility - was able to highlight my OS X and run repair disk. It came up needing no repair.
That's when he said to try the install again. Went through it all. Everything was the same - got to the restart countdown. It restarted with a bong and then again the gray circle with the line thru it and the cog wheel going round and round and round.
They did give me a case number so I can call back again tomorrow but I really don't know what could be left to do. Pretty scared here.
Also am going to need my new printer hooked up. Planned on hooking it up to my G4 because my macbook can print thru the wireless network. My G4 does not have wireless capabilities so I don't think I'll be able to print from it (assuming I get it running again) if I have the printer hooked up to my macbook - or my netgear router... not really sure where I'm supposed to hook it up if not to my G4.
I did transfer a couple of my applications from my external hd to this one - one of them being my Eudora (which I actually had already installed on this one I think) - just to try it - and you're right it didn't work. Just a little needle wiggling back and forth.
Guess tomorrow's another day.. but if you have any thoughts on anything to try they didn't bring up - would appreciate hearing them. Oh yeah - my install dvd is still in the drive of course. Can't get the door open with the button even when I turn the computer on. The eject key on the keyboard won't work either.
I did notice somewhere along the way that my available GB on my OS X is now down to somewhere under 5, while it was just under 10 GB to begin with. The dang new systen has to be on there just like the Version number said. But it won't open.
You told me something could happen. Wish I'd listened.
Should I be putting this on a new thread?

I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ??

I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!

I am experiencing the exact same issue during the installtion process for iTunes 10.5.
I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP!

Error when downloading itunes 10.5 that says Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package ven

Each time I attempt to download the new itunes 10.5 I keep getting the following error message:
Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SoftwareUpdate_UnregServer, location: C:\Program Files\Apple Software Update\SoftwareUpdate.exe, command: /UnregServer
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any Ideas of how to solve this one?

After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much!

Please i am unable to restore my ipad due to error 3194.The restore process stalls when it gets to the point where the firmwarwe is being updated.error message 3194 comes up.please help me

please i am unable to restore my ipad due to error 3194.The restore process stalls when it gets to the point where the firmwarwe is being updated.error message 3194 comes up.please help me

http://support.apple.com/kb/TS3694#error3194
Unable to contact the iOS software update server gs.apple.com

Software update failed message when starting firefox

When I start firefox I get an Software Update Failed message. that says the update could not be installed. please make sure there are no other copies of firefox running on your computer, and then restart.
This is the only copy I have running and when i restart i get the same message.

Please see [[How to fix the Update Failed error message when updating Firefox]]

Nokia Software Updater -- Error 1402.Could not ope...

H,
When I try to install the Software Updater for the first time to update my Nokia 6500c phone, I receive the following error message about 57% during the install process. I checked my permission keys in the registry, and they seem to have all the correct Admin permission.
Any suggestions?
Product: Nokia Software Updater -- Error 1402.Could not open key: HKEY_LOCAL_MACHINE\Software\Classes\Msxml2.DSOControl.4.0\CLSID. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Thanks.
Matt

Hi,
It looks like you do not have access to the registry key mentioned i.e. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current Version\Run\Optional Components\IMAIL.
This might be due to the fact that you may not be added to the Administrators group or the registry key has been denied access explicitly to a group that you may be part of.
People in my network setup were facing the same issue, and we fixed the same using Microsoft's "subinacl" tool. You can follow the below mentioned steps to rectify your issue as well:
1. Download Microsoft's SubinACL tool from http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe -4a91-93cf-ed6985e3927b&displaylang=en
2. Install the same by double clicking on the "subinacl.msi" just downloaded.
3. Open Command Prompt window through the Run Dialog Box (Start -> Run and type "cmd" and click OK)
4. In the Command Prompt window, type in the following commands:
i. cd /d "%ProgramFiles%\Windows Resource Kits\Tools" (Hit Enter)
ii. subinacl /subkeyreg HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents /grant=administrators=f /grant=SYSTEM=f /grant=USERS=f /grant="Creator Owner"=f (Hit Enter)
You should see some processes happening on your screen. After the process ends, retry the update operation you were originally trying to perform. Hopefully, it should succeed now.

After last automatic update, error message XUL Runner error platform version '6.0.2' is not compatible with minVersion 6.0.1. maxVersion 6.0.1. I am unable to open Mozilla Firefox at all. Had to use Explorer to ask this question!

After last automatic update, error message XUL Runner error platform version 6.0.2. is not compatible with min Version 6.0.1 maxVersion 6.0.1 appeared every time I try to open/run Mozilla Firefox.

See:
*[[/questions/869812]]
*[[/questions/869951]]

Elements 10 update error message

elements 10 update error message that says the update server is not responding?

RKV
Thanks for the reply. The deletion of the BadDrivers.txt file is your best opportunity for a resolution. So, let us pursue that.
If you have Premiere Elements 10 on Windows 7 64 bit, the BadDrivers.txt file is there. But....in your attachments, you show
Program Files
Program Files (x86)
and no signs of Program Data where you must start in the path to the BadDrivers.txt file.
a. Could you be using Windows 7 32 bit?
or
b. Are you working with Folder Options Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
In Windows 7 64 bit,
Click on Start
In the Search field that appears above Start, type in Folder Options.
Folder Options text will appear at the top of that left column for you to click on.
Clicking on Folder Options will bring up its dialog.
Click on the View Tab of the Folder Options dialog.
Then scroll down the list of options under View until you reach Show Hidden Files, Folders, and Drives,
and make sure that it is selected.
Program Data should appear in the lineup which includes Program Files and Program Files (x86).
Please let us know the outcome.
Thank you.
ATR

PS 6 is not updating: error message U44M1P7 Also have CC installed.

When I click on "more details" my finder opens like I'm supposed to choose a file and it's all gibberish to me.
Anyone encounter this and have a solution?

PS 6 is not updating: error message U44M1P7 Also have CC installed.
ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

After downloading Yosemite iPhoto is blocked. Update error message reads: Update not available for this ID either because it was bought by a different user...

After downloading Yosemite iPhoto is blocked. Directed to update. Update error message: Update not available for this ID either because it was bought by a different user..... This could be because my iPhone is now linked to the Mac and it is recognising that ID.

My previous post should read...Could this be because my iPhone is now linked to the Mac and is recognising that ID?

TS3694 software update error (1015) what is this?

software update error (1015) what is this?

Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

HT1338 Not able to down load itunes updates, error message: corrupt file could not be saved

Not able to down load itunes updates, error message: corrupt file could not be saved try again another time. All other update are able to download...... but not Itunes.
Note: My internet service is DSL and very slow (military installation with no other option).

Not able to down load itunes updates, error message: corrupt file could not be saved try again another time. All other update are able to download...... but not Itunes.
Note: My internet service is DSL and very slow (military installation with no other option).

Software Updates Error Message 3072?

Similar Messages

Maybe you are looking for