Software updates not completing

Hi
I have tried for the last couple of months now to update software via Software update. it never completes the update, always says that the image could not be created or something in those lines.
Some of the programs like iTunes have updated themselves but the global stuff and MacOS doesn't do that.
have tried third party download of OS but the server times out apparently.
Help! I am 2 gig in updates behind and If i waste another 2 gig in cap and again and again and the software still doesn't install I am going to...... I don't know yet.

Hiya,
I get this occasionally and I quit (or force quit) software update and do it again. On a couple of occasions, it was firewall related (as comms failed with receiving / sending info). If you are missing updates you could do a workaround:
Open system prefs/software update and click the tab "installed updates"
http://i530.photobucket.com/albums/dd348/hornybloke/applesoftwareupdate.jpg
you could go to http://www.apple.com/support/downloads/
and compare if you are missing anything.
(the installed updates vary from system to system depending on the Apple software installed.

Similar Messages

I SYNC MY IPHONE 4S WITH ITUNES..THE SOFTWARE UPDATE NOT COMPLETED DUE TO UNKNOWN ERROR. NOW MY PHONE IS NOT STARTING...WILL I LOSE ALL DATA?

BEFORE THE SOFTWARE UPDATE, THE IPHONE WAS BACKING UP..WHERE IS ALL THE DATA

PLS SOMEBODY HELP...HAVE LOTS OF IMPORTANT DATA WHICH I DO NOT WANT TO LOSE

Nokia n96 software update not complete, and now my...

after trying to update my nokia n96 firmware , via nokia suite, my phone goes idiot and when i power on my phone , it slow down so much,and screen freezes ! i've tested it, if i flip my phone and take it away to go to stand by screen, then flip on screen, now i see everything is right ,but if going to menu, it freezes and should to wait to display off and again press any key to display goes on and show me menu! and any work in my phone that change the screen,done with off/on screen to shows ! what happen to my phone ?!

First, Try re-installing the Firmware thru' Nokia Suite.
Else, Back-up all your data thru' Nokia Suite and Soft Reset the phone by dialing *#7370# followed by 12345 (default code unless changed by you..) when prompted. After the reset re-install the Firmware if necessary..
Be warned that this Reset will erase all dta from the Phone memory.You need to restore the data and MAY have to re-install a few applications.

The Deploy Software Updates Wizard completed with errors - Access is Denied

Hello, I am trying to download some updates that were synced up to the SCCM's database from another WSUS server. I am not able to get it done because the wizard fails with the access is denied error. I checked patchdownloader.log file and saw Error code
= 5 which means access denied. I tried to change permissions on the "updateservicespackages" folder within the folder, and I have full NTFS permissions for system, administrators, and read only permissions for everyone. Same thing goes for
the share permissions. My account is in the administrators group. The only way I can get it to work is by granting full permissions to "everyone", but that cannot be security friendly. Which account is "Deploy Software Updates Wizard" using
so that I can properly give it the required rights?

Hi,
You could have a look at the thread below. Lucas used ProcMon that shows an access denied with the user which he was using. Permission via group wasn't enough. Give your user full share/security access and everything works fine.
https://social.technet.microsoft.com/Forums/en-US/99859604-a803-43f3-a172-159a500fcb90/the-deploy-software-updates-wizard-completed-with-errors-access-is-denied?forum=configmgrsum
Best Regards,
Joyce

Software updates not available

I downloaded the new IOS 7 via Wi-Fi with my iPhone 4. After download completed IOS 7 doesn't want to install. I get this message : software update not available for the moment. Try later.
Anyone have this issue?... Is there any procedure for this?
Thanks,
Al

Alanders wrote:
I downloaded the new IOS 7 via Wi-Fi
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

Problem description: mac mail not opening, software updates not working, app store not opening. imac osx 10.9.5

Problem description:
mac mail not opening, software updates not working, app store not opening. 10.9.5
EtreCheck version: 2.0.11 (98)
Report generated 1 December 2014 16:51:49 CET
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
BenQ GL2240 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 1:32:17
Disk Information: ℹ️
WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (164.03 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
EPSON EPSON Epson Stylus S22 Series
Canon MX410 series
ASMedia AS2105 1 TB
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 210 MB
Backup (disk3s2) /Volumes/Backup : 999.86 GB (506.24 GB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader 7.95 GB
S.M.A.R.T. Status: Verified
EOS_DIGITAL (disk1s1) /Volumes/EOS_DIGITAL : 7.94 GB (7.83 GB free)
Western Digital My Book 1140 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
2TB (disk2s2) /Volumes/2TB : 2.00 TB (1.50 TB free)
Wacom Co.,Ltd. CTE-450
Contour Design ShuttlePRO v2
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24217.979618) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24217.979618) Support
[not loaded] com.parallels.kext.netbridge (9.0 24217.979618) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24217.979618) Support
[not loaded] com.parallels.kext.vnic (9.0 24217.979618) Support
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
/System/Library/Extensions
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
WkSvMacX: Path: /Library/StartupItems/WkSvMacX
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.epson.epw.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist Support
[failed] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.barebones.textwrangler.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[not loaded] com.gopro.stereomodestatus.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.tvmobili.tvmobilisvcd.plist Support
[loaded] fi.polar.libpolar.plist Support
[running] fi.polar.polard.plist Support
[failed] xxx.qnation.PeerGuardian.kextload.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[running] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[invalid?] com.plexapp.helper.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
SmartDaemon Application (/Library/Application Support/CleverFiles/SmartDaemon.app)
SilverKeeper Scheduler ApplicationHidden (/Applications/SilverKeeper.app/Contents/Resources/SilverKeeper Scheduler.app)
Dropbox Application (/Applications/Dropbox.app)
Garmin ANT Agent UNKNOWN (missing value)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.5.7r609 Support
Google Earth Web Plug-in: Version: 6.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
PandoWebInst: Version: 1.0 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.239
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 10.1.12 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
Safari Extensions: ℹ️
Open in Internet Explorer
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS4 Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
GoPro Support
Growl Support
Java Support
MacFUSE Support
MenuMeters Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
Back Up [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      12% Google Chrome
      12% WindowServer
      4% Dock
      2% Little Snitch Agent
      2% SystemUIServer
Top Processes by Memory: ℹ️
399 MB iTunes
322 MB mds_stores
216 MB Google Chrome Helper
193 MB Google Chrome
155 MB com.apple.IconServicesAgent
Virtual Memory Information: ℹ️
6.64 GB Free RAM
3.51 GB Active RAM
1.36 GB Inactive RAM
1.11 GB Wired RAM
1.91 GB Page-ins
0 B Page-outs

[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
Un-install according to the developer's un-install instructions.
You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
CleanMyMac - Uninstall
CleanMyMac2 Un-install
After un-installing, run this program to make sure you got all the pieces.
EasyFind – Spotlight Replacement
Do a backup.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.appstore.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Mac Book Software Update not working, iTune will not update because of that, iPhone 4 won't connect to iTunes because iTunes is not updated. Mac v.10.5.8, iTunes v.10.5.2, iPhone4 iOS 6

Mac Book Software Update not working (Software Update does not have any new software for your computer at this time), my current MacBook version is 10.5.8.
As a result I can't update iTunes, version 10.5.2 (This software requiers Mac OS X version 10.6.8 or later)
Now when I connect my iPhone 4, version iOS 6 iTunes can't connect to iPhone (The iPhone "XXXXX's iPhone" cannot be used because it requiers iTunes version 10.6.3 or later.)
so in a nutshell can't use iphone 4, because iTune is not updated and will not update because Mac Book is not up to date and will not update either.
Please help.
Thank you
bt465

Welcome to Apple Support Communities
Snow Leopard is a paid upgrade. http://support.apple.com/kb/sp575 Call Apple to buy Snow Leopard. Then, make a backup, insert the DVD and upgrade. When it finishes, open  > Software Update

Why is the software update not showing up in general settings?

Why does my software update not show up in general settings?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

TS1394 Software Update NOT WORKING (Snow Leopard)

Software Update NOT WORKING (Snow Leopard)
Hi, I am currently using Snow Leopard 10.6 on my iMac. I opened iTunes and was told there was an update available so I clicked the button to download it. This obviously opened up the 'download' screen with blue bar. The blue bar does not move and the message comes up that the download failed. I have tried troubleshooting, but the message I get is that I am not connected to the internet - which I am.
Please help.

Check your iTunes version, it's reporting v10.6.3 here on 10.6.8 and no updates required.
You should be able to download it from here
https://www.apple.com/itunes/

My phone is saying "software update not available at this time" - is anyone else seeing this?

my phone is saying "software update not available at this time" - is anyone else seeing this?

With everyone and their iDogs trying to update at the same time, things are gonna be a bit bumpy off the bat trying to update and/or activate.

Software Update not allowing me to complete....:/

What a pain! My computer is going haywire! YIKES!
It is not allowing me to complete any software update... including important security updates.
It says " The update "Security Update 2009-002 (Intel) can't be installed. A networking error has occurred: timed out (-1001). Make sure you can connect to the Internet, then try again."
What the heck!!???! I am connected to the internet, it allows me to download from there, access web-pages...etc. Thats not the problem, so why is it giving me this message!!!??
Any ideas to what is going on?

Hi kimmeh87,
You can try manually downloading the update from Apple's website and see what happens.
http://support.apple.com/downloads/SecurityUpdate_2009_002__Tiger_Intel
I assume you're running OS X 10.4.11 on this MacBook?
Secondly, you can navigate on the HD to /Library/Updates and delete the contents of this folder (leave the .plist) and attempt the process again.
As the above poster said, it's always a good idea to have a full backup prior to any significant update.

Nokia Software Updater not working on Nokia 6120 c...

My phone is the:
Nokia 6120 classic (RM-243) on the 3 network
Software Version 3.70.
I was using the Nokia software updater to update my Nokia 6120c.
It found my phone and a new software version 3.83 was available.
I then proceeded to follow the instructions on screen which led to the latest software download to the PC.
Once the download to the PC was complete another screen showed the download to the phone.
The progress bar was stuck on the same 15 seconds and no progress was made.
Another screen was then displayed showing 'phone recovery', with 4 steps available:
1.remove battery and charger from phone
2.insert the battery and insert the charger
3.click 'retry' to continue
4.press the phone's power button
After following the steps the same software update screen is displayed showing the progress stuck on 15 seconds. Once that fails the same 'phone recover' screen appears.
I closed the updater application and checked the software version using *#0000# and it still shows the same software version 3.70. No software update occured.

leas give me URL to download old Softwere v3.83 for nokia 6120c because i install v6.01 but i dont really like it thak you
hello there,
its is not possible to roll back the firmware. the only way you can update your frimware is to use NSU, for some newer phones FOTA and nokia care points. in very rare instances nokia care points will roll back the firmware but it is at thier discretion and you have to have a really good reason for asking them to do so.
usually alwyas check for the latest nsu, all the drivers and latest version of the pc suite prior to any firmware updates. if your phones are branded to a network, it is up to the network to approve firmware updates prior to release. this might be a reason why some of you are unable to download the latest firmawre for your phones. you can contact your provider and ask them if the latest firmware had been approved by them for release.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

I cannot get the iOS 5.0.1 Software Update to complete

When running the update for the ipod software iOS 5.01 the time countdown goes completely away. I get a message software update and then receive a pop-up message :
itunes message: There was a problem downloading the software for the ipod "ipod touch".
The network connection timed out.
Make sure your network settings are correct and your network connection is active, or try again later.
I have tried again later multiple times. What are the network settings supposed to be?
Thank you for any help.

Ok, so I have done all this and it's still not working. I have a Dell mini inspiron with Windows 7 Starter .... Any problem with this version? I keep getting 'network timed out'....but I also tried it on my other laptop and it updated my iPhone fine, but won't do my mini on either machine...I'm trying to switch it all over to the mini so I can give my son my other laptop...

Software update not showing any ios update

Hi I am using iphone 4s with ios6.1 ,I didnt downloaded ios 7 when it got released though i got notifications.
As of now i like to update my ios to latest(using OTA) but i not getting any software update in iphone, even when i click on software update its just keep on loading and showing "Checking for updates" but no other result is shown even after 15 mins. Internet and wifi is working properly as i can surf pages .
I tried to update via itunes too but my itunes needs to be updated to 11.0.3 when i click on download itunes latest ,its getting downloading to certain amount and get stucks with no more downloading.So i am not able to update ios via itunes.
This where it stucks
Kindly help me how to fix this..

Its quite normal for iTunes taking time to install new version 11.1.3 as it also completly depends on your internet speed as well
How are you trying to update iTunes?
1) By clicking on check for updates under under tab on iTunes or
2) or By completly uninstalling old version of iTunes and all related components from control panel add/remove programs and then trying to install fewsh copy
Its recommended that you try the 2nd step as it takes less time when compared to first method
Once you install iTunes you can connect the device and check if there is a update available for your iPhone.

Software updates not possible - New MacBook

I bought a macbook at the end of February 2008. I however have not been able to download the software update for Mac OSX 10.5.2. Each time I activate the Software Update utility, I am told that I have to restart. No problem, I proceed.
The problem is that my macbook powers down, and then sits there (to date my longest sit has been 24 straight hours!) just telling me that it is "Configuring Installation". After that I completly re-installed the Mac-Software with the original disks but having the same result. I have 3 other MacBooks with which I don´t have this problem. Please help - Thanks

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

Software updates not completing

Similar Messages

Maybe you are looking for