Software updates not possible - New MacBook

I bought a macbook at the end of February 2008. I however have not been able to download the software update for Mac OSX 10.5.2. Each time I activate the Software Update utility, I am told that I have to restart. No problem, I proceed.
The problem is that my macbook powers down, and then sits there (to date my longest sit has been 24 straight hours!) just telling me that it is "Configuring Installation". After that I completly re-installed the Mac-Software with the original disks but having the same result. I have 3 other MacBooks with which I don´t have this problem. Please help - Thanks

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

Similar Messages

Software Update Not Getting New Updates

Guys and Gals,
I read there was a new update to iTunes and Quicktime the past week. I currently have 7.3 and 7.1.6. When I hit software update it states I am all up to date. Should I go ahead and download the stand alone downloads from the site. Is there something wrong with my software update that it is not recognizing updates?
What really gets me is when I hit Check for Updates in iTunes it states there is a update and when I proceed it opens software update then software updates states I am up to date.
Any help I would be grateful....Thanks...

I just got my MacBook Pro and ran Software Update first thing. It said I was all up to date. I then downloaded iWork '08. When I tried to install iWork it said I needed OS X 10.4.10. I checked my about mac and sure enough I am running 10.4.9. My Quicktime is also 7.1.5. Why would software update tell me I'm all up to date if I have this older software on my computer. This thing has only been out of the box a few hours and I have installed exactly nothing on it. Anyone have any ideas?

A freeze during software update killed brand new Macbook Pro?

I have only had this computer for about 2.5-3 weeks, and it came with Lion. I was installing the recommended software update (attached to power like recommended), and the update froze about 10% from being finished (the bar did not move for 20 minutes). I pushed the power button to restart it, but ever since then, it won't restart; it only will show the Apple screen, and then I hear the hard drive shut down while the circle is still spinning. I tried booting it up holding down cmd-S, to see what the text would say, and it tells me that the bootstrapper has crashed. I am able to get to the recovery pane by booting with cmd-R, which is how I am on the internet, but I can't access my hard drive at all.
I did just do a time machine backup yesterday, but I have installed the entire Adobe Master Collection since then (which took FOREVER), and I was at school all day doing work, so I have quite a bit of important stuff I'd rather not lose if I can help it.
Any suggestions? I think this computer is possessed...I have had so many problems with it since Day 1.

You do know that Apple has a 14 day No Questions Asked return policy?
So you should of taken it back when you have the first problems. Now you are past that date but you still may be able to return it for a replacement that actually works as it should. The only way to tell is to take it back to where you bought it and explain all the problems you have had, including that it will not boot after doing this latest update, and ask for an exchange for a new unit that will work correctly.
Good Luck.

Mac Book Software Update not working, iTune will not update because of that, iPhone 4 won't connect to iTunes because iTunes is not updated. Mac v.10.5.8, iTunes v.10.5.2, iPhone4 iOS 6

Mac Book Software Update not working (Software Update does not have any new software for your computer at this time), my current MacBook version is 10.5.8.
As a result I can't update iTunes, version 10.5.2 (This software requiers Mac OS X version 10.6.8 or later)
Now when I connect my iPhone 4, version iOS 6 iTunes can't connect to iPhone (The iPhone "XXXXX's iPhone" cannot be used because it requiers iTunes version 10.6.3 or later.)
so in a nutshell can't use iphone 4, because iTune is not updated and will not update because Mac Book is not up to date and will not update either.
Please help.
Thank you
bt465

Welcome to Apple Support Communities
Snow Leopard is a paid upgrade. http://support.apple.com/kb/sp575 Call Apple to buy Snow Leopard. Then, make a backup, insert the DVD and upgrade. When it finishes, open  > Software Update

Problem description: mac mail not opening, software updates not working, app store not opening. imac osx 10.9.5

Problem description:
mac mail not opening, software updates not working, app store not opening. 10.9.5
EtreCheck version: 2.0.11 (98)
Report generated 1 December 2014 16:51:49 CET
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
BenQ GL2240 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 1:32:17
Disk Information: ℹ️
WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (164.03 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
EPSON EPSON Epson Stylus S22 Series
Canon MX410 series
ASMedia AS2105 1 TB
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 210 MB
Backup (disk3s2) /Volumes/Backup : 999.86 GB (506.24 GB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader 7.95 GB
S.M.A.R.T. Status: Verified
EOS_DIGITAL (disk1s1) /Volumes/EOS_DIGITAL : 7.94 GB (7.83 GB free)
Western Digital My Book 1140 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
2TB (disk2s2) /Volumes/2TB : 2.00 TB (1.50 TB free)
Wacom Co.,Ltd. CTE-450
Contour Design ShuttlePRO v2
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24217.979618) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24217.979618) Support
[not loaded] com.parallels.kext.netbridge (9.0 24217.979618) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24217.979618) Support
[not loaded] com.parallels.kext.vnic (9.0 24217.979618) Support
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
/System/Library/Extensions
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
WkSvMacX: Path: /Library/StartupItems/WkSvMacX
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.epson.epw.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist Support
[failed] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.barebones.textwrangler.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[not loaded] com.gopro.stereomodestatus.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.tvmobili.tvmobilisvcd.plist Support
[loaded] fi.polar.libpolar.plist Support
[running] fi.polar.polard.plist Support
[failed] xxx.qnation.PeerGuardian.kextload.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[running] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[invalid?] com.plexapp.helper.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
SmartDaemon Application (/Library/Application Support/CleverFiles/SmartDaemon.app)
SilverKeeper Scheduler ApplicationHidden (/Applications/SilverKeeper.app/Contents/Resources/SilverKeeper Scheduler.app)
Dropbox Application (/Applications/Dropbox.app)
Garmin ANT Agent UNKNOWN (missing value)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.5.7r609 Support
Google Earth Web Plug-in: Version: 6.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
PandoWebInst: Version: 1.0 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.239
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 10.1.12 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
Safari Extensions: ℹ️
Open in Internet Explorer
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS4 Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
GoPro Support
Growl Support
Java Support
MacFUSE Support
MenuMeters Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
Back Up [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      12% Google Chrome
      12% WindowServer
      4% Dock
      2% Little Snitch Agent
      2% SystemUIServer
Top Processes by Memory: ℹ️
399 MB iTunes
322 MB mds_stores
216 MB Google Chrome Helper
193 MB Google Chrome
155 MB com.apple.IconServicesAgent
Virtual Memory Information: ℹ️
6.64 GB Free RAM
3.51 GB Active RAM
1.36 GB Inactive RAM
1.11 GB Wired RAM
1.91 GB Page-ins
0 B Page-outs

[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
Un-install according to the developer's un-install instructions.
You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
CleanMyMac - Uninstall
CleanMyMac2 Un-install
After un-installing, run this program to make sure you got all the pieces.
EasyFind – Spotlight Replacement
Do a backup.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.appstore.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Why is the software update not showing up in general settings?

Why does my software update not show up in general settings?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed. Error message: Panic CPU 0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platfor

I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed. It instructed me to hold power button to shut off and then press again to restart. Same error message keeps coming up and computer won't boot to home screen.
Error message:
Panic CPU 0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platform
\"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platformexpert.cpl:150 4
Debugger called panic
Kernal uuid a8ed611fb0f-3729-8392-e7a32c5e7d74
THANKS FOR ANY HELP.
ROBB

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective.

HT5244 I have a new Mac 10.7.3. Software Update yields no new software. Does that mean I'm protected?

I have a new Mac 10.7.3 (Mac Pro). Software Update yields no new software. Does this mean I have no worries about any malware, including Flashback?
Thank you.

That's correct. No malware protection is needed because Java is not installed. However, if you need Java, then you can download and install Java for OS X Lion 2012-003.

Software updates not available

I downloaded the new IOS 7 via Wi-Fi with my iPhone 4. After download completed IOS 7 doesn't want to install. I get this message : software update not available for the moment. Try later.
Anyone have this issue?... Is there any procedure for this?
Thanks,
Al

Alanders wrote:
I downloaded the new IOS 7 via Wi-Fi
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

"The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?

"The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?

this just started w/ me yesterday. I was running 10.5.3, and nothing changed - the message just appeard out of nowhere. I update to the latest iTunes 10.6 but the message is the same.
Sounds like probably some sort of Library file corruption.
The two options available in the message box are "Download" and "Quit". Download is useless because I'm already running the latest. Quit is pretty useless.
I was going to just create a new Library and re-import all my music. Of course, all my iPhone sync settings are going go have to be recreated.

Will the apple tv 2 receive a software update for the new interface?

Will the apple tv 2 receive a software update for the new interface?

J.T.Holloway wrote:
I don't love it, but I don't dislike it either. Between the two, at least initially, I think I prefer the previous interface.
I know that will be the case for me.
J.T.Holloway wrote:
The new one is a little more Apple-like with icons instead of lists, but I liked having everything right on the screen before and now I have to scroll down to get to the icons below the tv screen view.
The old interface wasn't perfect but logical - as you say the icons are for the iPhone and iPad crowd, and as i see it will entail more scrolling and button hopping on the remote.
J.T.Holloway wrote:
I do like the icon look as it is more like the iPad, iPhone, Dashboard, etc.
Quelle surprise......
It's a bit like the redesign of these discussion fora - the new layouts are designed for the younger generation but far too much scrolling and hard work to find what you want compared to the old format.
I HATE SCROLLINGTO FIND THINGS
Sorry, rant over.

TS1394 Software Update NOT WORKING (Snow Leopard)

Software Update NOT WORKING (Snow Leopard)
Hi, I am currently using Snow Leopard 10.6 on my iMac. I opened iTunes and was told there was an update available so I clicked the button to download it. This obviously opened up the 'download' screen with blue bar. The blue bar does not move and the message comes up that the download failed. I have tried troubleshooting, but the message I get is that I am not connected to the internet - which I am.
Please help.

Check your iTunes version, it's reporting v10.6.3 here on 10.6.8 and no updates required.
You should be able to download it from here
https://www.apple.com/itunes/

I just updated to a new MacBook Pro. I transferred my ITunes along with most of my programs from my previous MacBook. I then tried to update my iPhone and iPad and was informed I cannot connect these devices to my iTunes. How do I fix this?

I updated to a new MacBook Pro and transferred my iTunes along with many of my programs.
I just tried to connect my iPad and my iPhone to my new computer and was told I cannot connect any longer. How do I fix this?

cshepherd wrote:
I updated to a new MacBook Pro and transferred my iTunes along with many of my programs.
I just tried to connect my iPad and my iPhone to my new computer and was told I cannot connect any longer.
Perhaps you would post the exact message?
And when exactly did you receive this message?

My phone is saying "software update not available at this time" - is anyone else seeing this?

my phone is saying "software update not available at this time" - is anyone else seeing this?

With everyone and their iDogs trying to update at the same time, things are gonna be a bit bumpy off the bat trying to update and/or activate.

I just ran a software update for Java and MacBook Pro SMC, now my Mini Display Port to HDMI TV is not working. The TV is flickering. The Mac Display is fine.

I was just watching / streaming TV off Safari on my actual TV.
I'm using a Mini-Display Port to HDMI cable for the connection to the external display.
Software update popped-up and said there was an update for Java and for SMC.
I ran the update and upon the computer restarting, my external display (my TV) is no longer working. It is now flickering.
It won't work in Mirroring or set up as an extended display.
I've reset SMC / PRAM / Safe Mode / Even restored from a Time Machine backup (From before the updates were done).
What could it be?!

I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port.

Software updates not possible - New MacBook

Similar Messages

Maybe you are looking for