Software version 30.0.011 for 5800 is

I updated my phone to version 30.0.011, but after that, phone is not working properly, green button to make a call is not working when phone is on main screen, only when I push menu, after that I can use green button to make a call and battery comsumption is higher then before, I tried to reinstall the software but no change,and new version 31 is still not available for Slovak republik.
Please could anyone let me know what to do?
thanks

You might want to consider resetting your phone. This is sometimes necessary, but I agree that it shouldn't be.
Note that this operation is going to erase the phone's memory entirely, so make sure you have backups of software that you've installed because this procedure is going to wipe that too.
Start by using the built-in backup in the file manager to back up your messages, contacts, calendar entries and bookmarks. Do not back up files or settings.
Switch the phone off.
Press and hold the green, red and "camera" buttons.
With these buttons pressed down, switch the phone on and keep them pressed down until you see the "Nokia" logo appear on-screen.
Let the phone start up, then restore the backup you made previously.
Finally, re-install the software that was deleted by the reset.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • Is there a manual I can PRINT for the Airport Utility Software Version 5.5.3 for Windows?

    Is there a manual I can print for the Airport Utility Software Version 5.5.3 for Windows?
    If there is, I can't seem to find it anywhere (in the Software, by using Google, etc).

    I dont' believe there were manuals out there for different versions of the utility. That would be quite a few different manuals.
    There are different manuals for the different base stations however...

  • WLC: which software-version support SHA2 certificates for Web Authentification and Web Management ?

    Hello,
    I tried to install new SHA2 3th-Party certificates on our WLCs. There are old WiSM1-Boards and 2504 to support our old 1230 Access Points, running 7.0.251.2, which didn't install it, although the config manual for 7.6 and 8.0 say that SHA2 certificates are supported since 7.0.250.0. When I tried to install the SHA2-certificates I get the message "File transfer failed" an the log says:
    *TransferTask: Dec 12 13:22:14.394: #UPDATE-3-CERT_INST_FAIL: updcode.c:1869 Failed to install Webauth certificate. rc = 1
    *TransferTask: Dec 12 13:22:14.394: #SSHPM-3-KEYED_PEM_DECODE_FAILED: sshpmcert.c:4085 Cannot PEM decode private key
    I tried to install the same certificates on our WiSM2-Boards, running 7.4.121.0 and I failed too. The same certificates could be installed on a 2504 running 8.0.100 without any problems.
    In all 3 cases I tried to install unchained certificates for web management and Level 3 chained certificates  for web authentication. I used the following guides to get the certificates (e.g. taken from the config manual 8.0.100):
    http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
    http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.pdf
    Which software versions support SHA2 certificates and which didn't ? Is the a list for it ?
    Regards

    Hello,
    I solved the problem. First I used a Debian Linux system with Openssl 1.0.1. After I searched the internet using one of the log messages above I found sites which mentioned to use Openssl 0.9.x. So I tried a productive and security fixes Debian Linux System running Openssl 0.9.8 and I succeeded. The wlcs accepted the certificate files and used it after a reboot. The Web GUI still shows a SHA1 Fingerprint, but the certificate signature Algorithm is SHA2:
    Signature Algorithm: sha256WithRSAEncryption
    When you check the openssl.org homepage Openssl 0.9.8 is still one of the actual version of openssl and is still available and fixed. But the Openssl Roadmap says:
    "We don't want to have to maintain too many branches. This is likely to include a timescale for the EOL of version 0.9.8"
    I don't know the differences between certificates made with openssl 0.9.8 and 1.0.1. Is there anybody who can explain it to me ?
    Regards

  • Looking for software version 4.2.173 for my 8800

    I have a software version 4.2.1.101 on my 8800. Its blutetooth version does not seem compatible with my car. i am looking for ways to download version 4.2.173 which is recommended by my car manufacturer. Can you point me to the right download URLsite? I do not seem to be able to find it.
    Thks and Best Regards
    Samy

    A1367 indicates you have a 4G iPod. Those can go to iOS 6.1.6.
    You can verify by see if the iPod has cameras, if yes it is a 4G
    Connect the iPod to your computer and update via iTunes
    iOS 4: Updating your device to iOS 5 or later
    You need iTunes 10.7 or later on the computer

  • Upon opening itunes, message says new iphone Software Version 4.3.5 for the iphone.  I click on download.  As it starts download, the est time is 58 minutes! I try it anyway, but the network "times out," no software update occurs.

    Upon opening itunes, I try to download Software Version 4.3.5 update.  Starts off with estmated time of 58 minutes.  Download never completes.

    I'm not sure about your problem but i can tell you that since my girlfriend updated her phone to 4.3.5 it doesnt let her put pictures on. I hadn't updated my iphone and could put pictures on my phone. Since i have updated my iphone to 4.3.5 i can not put pictures on my iphone either and results in my itunes library crashing and closing. How do i email apple to let them know of this prob?? Sorry i couldn't help you with your problem.

  • Is the software version 1.1.1 for 80GB classic the most current?

    I have just submitted feedback to apple and they asked me what software i was currently using on my ipod classic. However the drop down menu showed that v 1.1.1 (which i have) is for the ipod VIDEO 5th gen and that for ipod CLASSIC 6th gen it is v 1.0.2. But in itunes it says that the most current version is 1.1.1 for my ipod. What's going on there cos I am having some problems with random pausing during playback, so could this be the problem?

    The iPod feedback pages are out of date as far as firmware version numbers are concerned. V1.1.1 is the current firmware for Classic models.
    I take it you've tried reseting the ipod. Is this problem random or does it happen at the same point every time in particular files? If the later you may be able to fix it by reripping the tracks or converting to a different format.
    tt2

  • Going from Mavericks back to Mountain Lion, how do I download the correct software versions from app store for apps like iPhoto etc.

    I have a somewhat older iMac and after installing Mavericks the computer slowed down and the harddrive died. I just got a new harddrive installed and they had trouble getting mavericks to work on it also so they installed Mountain Lion which I am pleased with. I have purchased apps from the app store such as iPhoto and Pages, etc. so I thought I would easily be able to download them for mountain lion. When I look for the apps to download on the app store it lists the versions I had with Mavericks. iPhoto for example says I can download it for free but in the compatibility sections it says it requires OS 10.9 or later. Where can I find and install versions of my software such as iPhoto and iLife that will work again with Mountain Lion?

    Try downloading an app. There are those here who believe that the MAS will determine that you have OS X Mt Lion and actually download the app that your kit needs.

  • Common Array Management software version 6.10.1 for Linux x86_64 availability?

    My apologies if this is not the right location but I'm trying to find out when the Common Array Management Software 6.10 will be available for Linus/SUSE 64 bit systems if anyone knows.
    Thank you for your time.
    G Treadway

    Please refer "What’s New in CAM 6.10" in page 7 of Release Notes
    mentioned by Nicolas. It says "The Sun Storage Common Array Manager
    (CAM) 6.10 release is available only for Solaris OS management hosts.
    CAM 6.10 for Linux and Windows hosts is in development and will be
    available once it is complete. Until then, continue to use CAM 6.9 for
    Linux and Windows, which is available from My Oracle Support (MOS)
    https://support.oracle.com ."
    Rajkumar S

  • Cannot download iPod software version 1.1.1

    Hi there,
    Since days I try unsuccessfully to download the iPod software version 1.1.1 for my brand new iPod nano 8GB. I allways get an "unknown error -23" after having connected to the download server. My internet connection is absolutely fine.
    Any suggestions how to get the latest software version?
    Thanks!
    iPod Nano 8GB   Windows XP  

    Okay.
    I don't think you're getting this error message, but try these steps anyways...
    http://docs.info.apple.com/article.html?artnum=304468
    btabz

  • CJS-00081  Assertion failed: No db client software version available

    Hi Experts,
    I'm doing system copy on Oracle.9.2 and SAP R/3 Enterprise 4.70 Ext.Set 1.10 SR1 in AIX5L, I haved check Note:659509,
    during run the Installation Master,The Central Instance and Oracle software is installed and when I installing Database instance, the error massage show up as following:
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_ClientVersion.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_ClientVersion.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_ClientVersion.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tORA_TablespaceNameMapping.insertRow(), inserting
    TRACE      [iaxxhcache.hpp:534]
               CDomainObjectCache::readFromKeyDb(iastring, bool, const iastring &)
    CDomainObjectCache::readFromKeyDb: Reading from tGlobalDbParameters WHERE dbSid = 'PRD'
    TRACE      [iaxxejsexp.cpp:138]
               EJS_Installer::writeTraceToLogBook()
    tGlobalDbParameters.updateRow(, WHERE dbSid = getContextParameter('dbSid')), updating
    ERROR      2011-06-25 07:29:41 [iaxxinscbk.cpp:219]
               abortInstallation
    CJS-00081  Assertion failed: No db client software version available in tORA_ClientVersion for client type AIX_64
    have any advice?

    Oracle 9 is out of support. Why are you using this version. You can install R/3 4.7 on Oracle 10g, and as per your problem have you installed oracle through setup.exe or Sapserver.cmd ?
    Regards,
    Subhash

  • New software for the Nokia N79 version of "30,011....

    News update software, it is information that came out of the new software for the Nokia N79 version of "30,011." Why is it not available to update via the Nokia Software Updater????

    release of firmware updates depends on Nokia and on network operators. if you have a generic, unbranded phone then it will ome very soon to be released for your product code. if you have a branded handset however (i.e. with your operator's logos/animations all over the firmware), then this will take longer or may not come at all. since your operator has the choice whether to release the firmware with their own customisations to the customers, or not.
    If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

  • Unable to update my software version on Nokia 5800

    Hello Friends,
    Ever found yourself in a situation where you are unable to update your software version...??? 
    My current software version on my 5800 is v 20.0.012 and the software version date is 26-01-2009. I am unable to update it when I try to - It checks for updates, but then, it says no updates available - Kindly help
    Thanks in advance!

    Is your phone network branded? Firmware updates for network branded phones have to approved by the network before they are released. Some networks are very slow to approve them and sometimes they don't bother unless someone chases them, So if your phone is branded, ring your network and give em hell.

  • Nokia 5800 Software Version V31.0.101 failed to up...

    Hi Nokia!
    I purchased your Nokia 5800 Xpress Music mobile phone and I am trying to update the software/driver to improve 1: Touch Screen scrolling, 2: version of OviMaps, 3: Ovi Contacts, 4: SW application, and 5:  WLAN performance.
    I called technical support for mobile phones, unfortunately it is unavailable according to the recording, i've waited for i think its wrong, but nothing happened the call dropped.
    The current software version is V31.0.101, Software version date: 16-09-2009, type: RM-356 and it does not upgrade. I have tried using my phone options to upgrade/update the software, this did not work, i have tried using the Nokia Software Updater but it can not find the new version of the software, and I have tried searching for the new software version by using my phone code under the battery and still it can not find the new software version.
    Has anyone resolve this issue? I need help on resolving this issue.
    Nokia any solution?
    I hope to hear from you soon.
    Have a good one.
    Cheers!
    03/02/2010

    NOKIA 5800
    Mobile Issues
    The phone touch screen is not very responsive.
    Limited setting/shortcut you can set on the main screen.
    Alarm is inconsistent. Sometimes it’s late.
    Clock settings/time zone is not working properly.
    The charger port on the phone is a bit loose. Charging gets interrupted even if there is only little movement.
    Option is to update NOKIAs 5800 software. Current version is V31.0.101, the latest version is V40.0.005.
    Nokia PC Suite / Nokia Software Updater cannot find the update
    Tried to use the mobiles code, still cannot find the update
    My mate has the same mobile NOKIA 5800 on a Virgin Mobile plan; he was able to update the software. I got images of his phone and my phone with different versions, mine was the old version his got the new 40.0.005 His mate has the same phone as well, which they manage to update the software. He tried helping me update the software, but ended up unable to update the software and got frustrated.
    Option is to speak with TeleChoice Barrack Street. After TeleChoice checked the phone why it will not upgrade they suggested having the phone serviced/checked by Nokia Care in Morley.
    I let Nokia have a look at the mobile/issue, they told me they will be able to update the software for me, I left my mobile with them, and after 3 business days and the going back and forth to Nokia, and they were unable to update the software. Very sadly, they said it’s being locked by Optus.
    I am using 3 as my provider, the mobile I bought it outright from TeleChoice, no plan whatsoever. So I don’t understand why Nokia said it is being locked by Optus.
    The option provided for me is to patiently wait for updates, which is available now or to return the product.
    Now I am processing a replacement of the device from TeleChoice 10/02/03, hoping to have the issue rectified. They should rectify this, or there will be a violation againts fair trading.

  • Nokia N79 software version 30.011 released

    Hey everybody a new SW for the N79 is out!
    Nokia N79 software version 30.011 released
    This software release comes with stability improvements and new features that help you stay in touch with your friends. Contacts include Ovi features that allow you to locate your friends and receive updates on what they are doing. You can also chat with your friends and share your favorite places with them. This release also includes improved video stabilisation. To get this software through your device, type in *#0000# on the home screen or go to Device Manager. Select Options > Check for updates and follow the on screen prompts. Additionally this software release is available through the Nokia Software Updater: www.nokia.com/softwareupdates.
    Maybe some N79 users can give us some feedback about it?
    Message Edited by illinjah on 15-Jun-2009 08:17 AM
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

    Check out the link below, there you´ll find a probable reason why the update isn´t out for your phone yet...
    http://linux.sgms-centre.com/nokiafaq/branded-phones/
    Greetz,
    illinjah
    Message Edited by illinjah on 15-Jun-2009 09:42 AM
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

  • My iPhone 4s says that my software version 5.0.1 is up to date.  Why am I not receiving the notification that the new update is available for me to download?

    I have an iPhone 4s, not jailbroken.   I was able to update to 5.0.1 when it came out last year.  When 5.1.1 came out, I noticed that I never received the
    notification that a new update was available.  I updated my 2 ipads and my wife's iphone 4.  I didn't bother looking into it, since I didn't feel the need to update to 5.1.1.  Now I want to update to ios 6, but when I go to Settings > General > Software Update.  It checks for updates , but still shows me that my 5.0.1 is up to date.  I plug into itunes and check for update there and it still indicates that 5.0.1. is up to date as well. 
    Does anyone know what this is happening and how I can update to ios 6?
    Thanks for the input.

    muneer86 wrote:
    hi, i have iphone 4s with version 5.1.1(9B206). im unable to update the version to ios 6? if im updating my phone in middle it says this an error occur while updating . can anyone help me to update my phone to latest version?
    Follow the instructions that were already given in this discussion.

Maybe you are looking for

  • Jam Packs in Logic 8

    I seem to having a problem loading some apple loops into the arrange screen in Logic 8. Sometimes it lets me load a few in, but in the case of most of them, i'm having no luck! Whenever I try and drag an apple loop into the arrange screen, it just bo

  • What will happen if I change the name of my Apple Id?

    I have only one Apple Id, which is my email address "[email protected]". My Apple Id and primary email are the same. I now have a new email address, and want to change my Apple Id to my new email address. I've been to the Apple Id support page, and ha

  • Scratch disk error plus canvas image error help

    so i recently restored my computer back to factory settings .. so my computer doesnt even have any new downloaded app .. i download photoshop cs6 now im getting scratch disk errors ..which i dont see possible if my computer doesnt have anything on it

  • Help needed with a Nav Bar and PHP page.

    Hello, i'm designing a website http://www.ahcagency.com for wich i create a nav bar in FW and exported the html to DW and inserted in a template so that way i update all the pages from the template. Everything works fine, but i have a login page for

  • I get "The connection was reset" when trying to open Hotmail from my bookmarks. Why?

    None of the solutions provided along with this message seem to apply.