Software version from IMEI

Hello all,
How can I understand the iOS version of an iPhone by checking its IMEI? I think the last part of IMEI is called SVN which shows the software version. I have an iphone 4 with an IMEI ending with 17 and I'm using 6.0.1. So what does 17 mean?
Thanks for the help

I'm talking about IMEISV, Please read the wiki,
The IMEISV drops the Luhn check digit in favour of an additional two digits for the Software Version Number (SVN), making the format AA-BBBBBB-CCCCCC-EE
For example, the old style IMEI code 35-209900-176148-1 or IMEISV code 35-209900-176148-23 tells us the following:
TAC: 35-2099 - issued by the BABT (code 35) with the allocation number 2099
FAC: 00 - indicating the phone was made during the transition period when FACs were being removed.
SNR: 176148 - uniquely identifying a unit of this model
CD: 1 so it is a GSM Phase 2 or higher
SVN: 23 - The "software version number" identifying the revision of the software installed on the phone. 99 is reserved.

Similar Messages

  • HT4623 I have an iPad2 w/ wi-fi, 16gb.  I would like to update my software version from 4.3.5 to a later version; however, when I go to settings, general, the "software update" option does not appear???

    I have an iPad 2 w/wi-fi, 16 GB.  I would like to update my software version from 4.3 to a later versionn; however, when I go into Settings, General, the "Software Update" option is not there???

    Judi126 wrote:
    ... "Software Update" option is not there???
    That is only a feature of iOS 5 or later...
    You have iOS 4... See Here...
    http://support.apple.com/kb/HT4972
    OR...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • TS3694 I'm trying to update my iphone 3g with software version from 2.2.1 (5H11) to 2.2.1 and an unknown error occurred (-1)

    I'm trying to update my iphone 3g with software version from 2.2.1 (5H11) to 2.2.1 and an unknown error occurred (-1)

    eepereira wrote:
    an unknown error occurred (-1)
    That Error message is indicative of a Hardware issue. The Device may need Service. Take it in for evaluation.

  • Is there any problem in converting my 3g phone software version from 3.0 to 4.2.1

    is there any problem in converting my 3g phone software version from 3.0 to 4.2.1

    yes you can upgrade from 3.0 to 4.2.1 without any problem if it's officially unlocked.

  • HT4972 Upgrade iPhone software version from 4.3.4 to the latest available

    I am trying to upgrade my iPhone software version from 4.3.4 to the latest and keep getting this message whenever I hit <Update> or <Restore>.  "The iPhone software update server could not be contacted" - what should I do?

    Start by making sure you have disabled any firewall or antivirus programs.

  • Can I update my software version from 4.0.1 to 5.0.1?

    Dear friends,
    I have an iphone, gifted to me, with a software version of 4.0.1.  I have just been using it for more than a year now with itunes and other Apps.  Everytime I connect it to the computer, it is telling that a new version 5.0.1 is available but I am afraid to download it fearing any adverse effect on my existing content and apps. (Especially so because I am not aware of its purchase details and other particulars).  Some of the Apps I have do not get installed in my phone since they all need 4.3.0 or more.  Please advise whether I can go ahead with downloading the latest version or whether any risks are associated.
    Thanks for the help in advance!
    Nrn

    Plug into iTunes, select iPhone under DEVICES and right click and do a backup first before you update to 5.0.1.
    It will ask you to restore, so you can choose to restore from backup.

  • Going from Mavericks back to Mountain Lion, how do I download the correct software versions from app store for apps like iPhoto etc.

    I have a somewhat older iMac and after installing Mavericks the computer slowed down and the harddrive died. I just got a new harddrive installed and they had trouble getting mavericks to work on it also so they installed Mountain Lion which I am pleased with. I have purchased apps from the app store such as iPhoto and Pages, etc. so I thought I would easily be able to download them for mountain lion. When I look for the apps to download on the app store it lists the versions I had with Mavericks. iPhoto for example says I can download it for free but in the compatibility sections it says it requires OS 10.9 or later. Where can I find and install versions of my software such as iPhoto and iLife that will work again with Mountain Lion?

    Try downloading an app. There are those here who believe that the MAS will determine that you have OS X Mt Lion and actually download the app that your kit needs.

  • Retrieve software versions from NI licence manager

    Hello
    We want to retrieve the serial numbers of active licenses of our testsystems automaticaly and store the info in our database.
    So it possible to retrieve data from the  NI license manager in C# 2012  (ore maybe in Labview)?.
    Is there an API ?
    thanks in advance
    Tonnie

    Hello
    We want to store the information in a Mircosoft SQL database.
    We had a idea to creat a sequence in each testprogramm that stores the licence info of each tester in the sql database.
    In the current situation, when we want to have a overview of all licences,   we have to do this by hand. This costs us a lot of time.
    So we thought, maybe we can automated this process.
    tonnie

  • HT1947 Remote app requirements are stated as "software version 3.1.3 or later". I am running 4.2.1 and when I try to download it says 4.3 required. Where can I get the (old) version that runs on my IOS?

    'Remote' app requirements are stated as "software version 3.1.3 or later". I am running 4.2.1 and when I try to download it says 4.3 required.
    OK, I understand that new versions make use of facilities that come with new versions of IOS, but there is/was a version that runs on 3.1.3 and therefore, I assume 4.2.1. Where can I get the (old) version that runs on my IOS?
    The app store seems to ignore all legacy equipment owners, and want me to spend loadsa money to get the latest shiny toy. It probably makes business sense, but I dislike companies that take that approach. This is my first venture into smart phones, and I like the IOS interface, but I'm not sure I can afford the maintenance.

    The app store seems to ignore all legacy equipment owners, and want me to spend loadsa money to get the latest shiny toy. It probably makes business sense, but I dislike companies that take that approach.
    This is standard for Apple.  While there is little official mention of the software support lifespan for equipment, typical support has been about 4-5 years for computers.  It strikes me that newer items, especially mobile devices, are not built as sturdily nor do they have the hardware upgrade capabilities required to keep up with newer systems.  When we bought an iPhone 4S we were told by the person in the store we'd probably be looking at a newer model in two years.  The iPhone 3G could be anywhere from 2 to 4 years old, putting it well into.
    As for app availability, Apple typically pulls old software versions from its site when new versions appear.  If it is a non-Apple app then I guess it is up to the vendor. It is indeed tiresome but it is not at all unusual.  Since I only ever run used Macs, I download current versions even though my computer won't run them, stick them on a hard drive, then I have them when I upgrade to a newer used computer.  If you run older equipment you have to learn a different mode of operation to exist with the Apple 'new and innovative' but 'forget about the old' philosophy.

  • IPad software version downgrade

    Please any ideas how to downgrade my iPad 2 software versions from 5.0 to 4.3 as the 5.0 is not compatible with the application code I just completed on my Xcode 4.3.

    Downgrading the iOS is not supported by Apple. If you are a developer, you are in the wrong forum. If you are a developer and you need help, I think you can start here.
    https://developer.apple.com/devforums/

  • I have the iPhone 5 and have with 6.0.1 software version.  Although I had them when I moved from iPhone 4 to the 5, the latest update has most of my songs on the phone listed in grey (over 95% of them) and I can't play them.  They are still listed though.

    I have the iPhone 5 and have with 6.0.1 software version.  Although I had them when I moved from iPhone 4 to the 5 (could play them), the latest update has most of my songs on the phone listed in grey (over 95% of them) and I can't play them.  They are still listed in the iTunes library.  When I look in the Summary for the iPhone, it shows Audio as only .16 GB - I have over 5 GB of songs, so what gives?
    P.S. When I look at my Playlists most of the songs are greyed out.  However, at the bottom of the list there is a cloud icon with a downward facing arrow.  When I click on it each song starts to "load" and after a few minutes I have the songs back on in the list.  I have to do this to all my playlists (I had over 100) in order to get access to all my songs.  Then I did a sync and it happened again!
    I use iCloud for documents and some other things (calendar, contact, etc.) but am not aware that I have anything music-wise in the cloud.  Any thougnts?

    You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

  • I have just received an iphone 4 from a friend and it is in software version 4.3.2 still and will not update to latest version. It updates for about 3o minutes and then an error reading that my interent connection timed out? Any suggestions?

    I have an Iphone 4 from a friend. It was never updated with him and now I am trying update to latest software version. It is currently in 4.3.2 and it updates till the last few seconds and then a message, with no error number, states that the internet connection had time out during update. I am using my PC and have tried unsuccessfully for a week. I have tried to restore setting on phone first before plugging in to PC and updating software through Itunes? I took it to my mobile phone outlet and they couldn't help? Is there another way?

    Read through this:
    http://support.apple.com/kb/ht1808

  • Unable to read software component versions from System Landscape Directory

    Hi XI,
    Once I could import software component version but now I can't. Maybe I did something wrong in SLD.
    Could you please give me some hints?
    Thanks,
    Bruce

    hi,
    i have also problem with "import software componenet version "
    i got a message like
       "unable to import software component version from
    system landscape directory ......."
    than i gone for SLDCHECK...i got an error it is ............
    calling function LCR_LIST_BUSSINESS_SYSTEM
       Retreiveing data from the sld server function call returned   exception  code 4
      connection to sld does not work
      check sld function and configuration
    what that i have to do ...to make it work ....please give me any solution for that please give me detailed info
    with regards
    Edited by: praneeth mamgunta on Jun 27, 2008 4:04 PM
    Edited by: praneeth mamgunta on Jun 27, 2008 4:07 PM

  • Unable to read software component version from System Landscape Directory "

    I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
    A) Is my understanding on resolution correct?
    Should I go and apply notes 940309 and create client copy of existing client 001
                                        OR
    change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
    I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
    B) Here is what I have done and the error:
    1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
    /people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
    2) When I import the SWC from integration repository getting error
    (Unable to read software component version from System Landscape Directory "server:5<system number>00").
    C) Pointers used from the forum to debug the issue, but still no luck
    Below are the points checked from the forum and all steps are correct, but still have issues with the import
    1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
    2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
    3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
    4) logged using PIAPPLUSER http://server:port/sld and it works
    5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
    Notes: 940309
    You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
    You don't want to use the default client 001, but another client as Integration Server.

    applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
    Note:
    I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
    A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
    http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
    1.      Call the wizard-based configuration tool as described in Configuration Wizard.
           2.      Select the scenario PI and the task PIPostInstallProcess.
           3.      Choose Execute.
    A list of the steps to be executed by the wizard is displayed.
           4.      Choose Install.

  • Unable to read software component versions from System Landscape

    Dear all,
    I have an ECC system with ABAP and Java installed.
    I already configured so that SLDCheck, RFC destination configuration run successfully.
    PIAPPLUSER is not locked and can logon.
    However, when I import software component version in Integration Builder, the system return error message "Unable to read software component versions from System Landscape Directory "Server:50000".
    Please tell me how to correct this error.
    Giang

    Hi,
    Check this
    http://****************/Tips/XI/SWComponentError/Resolve.htm
    "Unable to read software component versions from System Landscape Directory
    Unable to read software component versions from System Landscape Directory
    unable to import from SLD
    Regards
    Seshagiri

Maybe you are looking for

  • ESA Authentication Log

    Hi all, We have two IronPort Email Security Appliances and one Management Security Appliance.  I just took a look at the authentication log on one of my ESAs and I saw that the user "smaduser" was connecting from the MSA every few seconds.  This make

  • CPF monthly report

    Hi, Can anyone explain relevance of various option in IT0186(Voluntary contribution) and impact of using those options on CPF monthly return? In my case,if i give flat amount as CPf contribution,it doesn''t reflect in CPF report,how to get correct CP

  • Conversion of internal table into excel file format &put it on app server

    Hi, My requirement is to convert the internal table into excel file format and I have to store it on application server so that administrator can send the file thr e-mail attachment. So, please let me know how to convert the records of internal table

  • Snapshot too old errror

    Hi Team I have a string lets say by the name v_instr :='insert into temp values(:request_id,deptno)'; IF (l_record_count = 0) THEN -- For BV -- modified by skhairna on 12Jun2008, added order source CSCC+Ciber for Data validation qry_string:= 'select

  • Story - not able to log in and retrieve written work

    I have cs 5.5 production premium and have been using story for a lot of written work and script writing over the summer. I didnt log in for a month or so and now it says i need to upgrade and i click the link and it just takes me to the adobe product