Software versions on fieldpoint controller

I was updating my cFP 2120 with the newer software versions (because I'm having some problems with communication via Datasocket and logos, which I'm going to post in the Labview forum, and thought this might help), updating all software versions to that of my PC. Too late, I noticed that I updated the Labview RealTime to version 8.0 from version 7.1 but I am only running LV 7.1 both on my realtime app and on my PC. Now when I try to set my LV target to my cFP I get the error: "Access denied: LabVIEW RT communication protocol version mismatch." I'm assuming it's because of the 8.0/7.1 descrepancy. So I tried to go back to LabView RealTime 7.1 on the cFP but when I do that it gives me the error: "Cannot process install because other dependencies are required: LabView RealTime 8.0." I think I'm trapped in a circle!
So my most basic question is, How do I go back to the way it was?
My other question is, is there somewhere to get a list of the most current versions of the software that should be installed and are compatible with LV 7.1? The ones that I need to know are the ones installed on the cFP controller (the list that appears when you right-click on Software and choose Add/Remove software):
Datasocket for LabVIEW Real-time - 4.3 or 4.2?
FieldPoint drivers - 5.1.2 or 5.1.0?
FieldPoint VI Manager - 4.0.0 or 3.1.0?
LabVIEW RealTime - 7.1 or 8.0?
NI-IrDA RT - 1.0.2 or 1.0.1? (I don't even know what this is)
NI-Serial RT - 2.5.6 is OK?
NI-VISA - 3.4.1 or 3.3.1 or 3.2?
NI-Watchdog - 2.1.4 is OK?
I also have a Network Variable Engine and a Variable Client Support but neither are installed on the cFP - don't know if they should be.
In general I'm using Fieldpoint 5.0, I'm assuming this is OK for LV 7.1??
Thanks for any insight.

Hi !
I’m new on FP platform and I have quite the same problem :
on my controller (2120) :
fieldpoint drivers 5.1.2
fieldpoint Vi manager 4.0.0
real time 8.0
... (see the attached image)
this set-up was made by my predecessor (gone forever with the coding computer)
for some obscure reasons and now my boss ask me to make some modification on
the code, so I tried to deploy a new version on the FP and of course there is a
version compatibility problem with versions installed on my computer
I have tried both LV 8.0, 8.2, LV real time 8.0, 8.2
I need LV and LV RT 8.2 to open the project and I was unable to export it to a
previous version (8.0)
real time 8.0 seems to be needed by the controller (instead of 7.1) but when I
try to deploy I think 8.2 is used by my computer
the LV code deployed on the controller works fine but we need to add some fonctionalities, I was thinking of re-inteall all the compatible versions but my boss doesn’t want me to modify the software installed on the controller because
in case of a problem we have a production problem ... so I can just do watever I want with my computer
in he's memories a NI guy is came few months ago to make some modification on
the coding computer (gone) but there is no information about what does he made…
is there is a way to get off this shit ?
sorry for my
poor english
matthieu
Attachments:
max.png ‏11 KB

Similar Messages

Upgrade software version for wireless controller

Hey
Does anyone knows or recommend the best stable bug free (or less bugs) software version for Cisco controllers models 5508's and WISM2 .
Thanks
Sent from Cisco Technical Support iPad App

If you have Windows 8 machines, 7.3.101.0.
If you don't, then 7.2.111.3.
Otherwise, you can wait for the 7.4.X to be published in the next few weeks.
NOTE: Whether you are going to 7.2.X or 7.3.X or 7.4.X, please upgrade the FUS.

Software Version Upgrade for Cisco 4402 Wireless Lan Controller

Hi,
We have Cisco 4402 Wireless Lan Controller with Software Version 3.2.171.6 and we want to upgrade it to latest version.
So can anyone please let me know the latest version to upgrade the WLC?
Also since WLC is running on very lower version is it possible to upgrade to the latest version directly or we have to move it step by step to upgrade this to latest version?
Thanks

Take a look at the compatibility matrix below:
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
7.0.235 is the latest that you can go to:
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_235_0.html
The release notes outline the upgrade process.
"Upgrade to 4.0.206.0 or later 4.0 release, then upgrade to 4.2.176.0, before upgrading to 7.0.235.0."

Recommended to upgrade WLC to software version 4.0.179.8?

Hi Sir,
I'm deploying a few WLC 4404-100 in a Mobility Group. They are installed with software version 4.0.155.5.
I understand that the latest version is 4.0.179.8. Is it recommended to upgrade the WLCs to this version?
Please advise.
Thank you.
B.Rgds,
Lim TS

Hi,
I'm having a WLC 4404-100 running software version 4.0.179.8. Doing functional test now.
Created a WLAN with 802.1x and WEP 104-bits.
My wireless card is 3Com 3CRWE62092B. Windows XP SP2. Associated to the Lightweight AP and passed my EAP PEAP-MSCHAPv2 authentication with a backend Microsoft domain controller.
The connection is fine. However, every about 15 minutes, XP prompts the username/password dialog box again. My connection is cut off until I re-authenticate.
I never faced this problem before using Odyssey client previously with a WLC running software version 155.5.
Please advise.
Thank you.
B.Rgds,
Lim TS

LWAPP to CAPWAP across different software versions. ?

Hi guys,
I was wondering if someone could clarify what happens when you have controllers live on two different software versions..
We have 4 controllers.. 2 on version 4.2, which APs currently register to with LWAPP and 2 new ones on version 7..
On WCS, I have moved an AP currrently registered on a version 4.2 controller and reassigned it to the newer controller ( ver 7 ).
The AP then reboots and I can see in the event logs that it comes back up on LWAPP after resolving the entry CISCO-LWAPP-CONTROLLER.
On WCS, the AP shows as registered back on the old Controller ( ver 4.2 ) but the Primary and Secondary Controllers are still pointing to newer ones ( ver7 )..
According to the Cisco document, the transfer from LWAPP to CAPWAP should be seemless, so is this a problem migrating across different software versions. ? Will the AP sort itself out eventually.
If I console into the AP and statically assign the new controller IP address, this forces the AP to download the newer software version ( after multiple auto reboots ) and it comes up on CAPWAP.. This shows that the path between the AP and controller is ok..
Ideally, Im hoping that I can simply reassign our current APs to the new controller ( and onto CAPWAP ) rather than having to console into all our remote APs and statically reconfigure them.. Not fun !!.
Any advice would be appreciated..
Thanks.
Jon.

Hi Nicolas,
Thanks for the reply..
Yes I agree that, once on version 7 it will perform a lookup for " cisco-capwap-controller ".. I forgot to say in my original post that I had already check this and it does resolve correctly to the two newer controller IPs.. If I console into the AP and manually define the newer controller IP address, it all goes through sucessfully and I can see the discovery and correct registration process in the logs
So we know that it kind of works but Im hoping that there is a simplier solution from within WCS where I can do all this remotely, rather than consoling into every AP locally.
Your suggestion of inputting the new controller IPs in WCS instead of the names sounds good however, it needs to be on version 7 first to be able to do this ? As you say, there is a field for this in version 4.2.... Looks like there is a bit of chicken and egg going on here !!.
Any other ideas or thoughts would be appreciated.
Many thanks.
Jon.

Does MARS 5.2 support FWSM software version 3.2?

Does MARS 5.2 support FWSM software version 3.2?

Hi Andrea,
No. MARS 5.2 only supports up to FWSM 3.1
And MARS 5.3 only supports FWSM 3.1.5
Please take a look for yourself at this document:
Supported and Interoperable Devices and Software for Cisco Security MARS Local Controller 4.2.x and 5.2.x
You can reach it via this link if you are logged into CCO:
http://www.cisco.com/en/US/partner/products/ps6241/products_device_support_table09186a0080467232.html
Hope this helps.
Best,
Paul

2 Cisco 2504 controllers but different software versions

Hello,
I am configuring two 2504 controllers, which I ordered together, however they run different software versions and I don't have a contract/ login to download wlan controller software from the Cisco website.
The one with the newest version runs 7.2.103.0 while the other one runs 7.0.220.0
I want to run them together in the same subnet and use them for redundancy (10 AP's will connect)
Is there a way I can download the software from the controller, just like I am able to do with an ASA firewall? Then I can upload it to the controller with the older software version.
Thank you and regards,
Ralph Willemsen
Arnhem, Netherlands

Hello Ralph,
No, you can not download the code from the WLC. You can contact your reseller and request the firmware.
If you have a contact with Cisco sales team you can tell them and they can open a TAC case for your behalf to publish you the code.
If your device is under warranty you can send your serial number to [email protected] along with your CCO ID. They will publish you the image if the device is under warranty. (or if it is under valid contract but you don't have the contract number).
HTH
Amjad

WiSM- Latest Software version

I am using a WiSM controller with software version 7.0.116.0. Can this work with netflow. And if the answer is no, which software version can?

Here is a matrix of all wireless devices and code support. The WiSM last code support is v7.0.x.
Like the others mentioned, you need to purchase the WiSM2 or go with a WLC like the 5508 in order to use a code that supports netflow.
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
Sent from Cisco Technical Support iPhone App

Software versions with thin APs

I'd appreciate an explanation of all the software version reported by the WiSM,
Below are all I can find.
It involves a WiSM with 1131AG AP (converted from autonomous to LWAPP).
S/W Version ............. 4.0.179.8 (obvious)
Boot Version ............ 12.3.7.1
Mini IOS Version ......... 3.0.51.0
IOS Version.............. 12.3(11)JA
When is each piece of software relevant?
Thanks

Mark,
The boot version has to do with what IOS is loaded initially to boot the AP.
The Mini IOS Version, is an LWAPP version that is initially loaded to start that communication, I think.
The IOS Version, is the currently running version of code on the AP that it has received from the controller.

Upgrading wlc4402 software version

hi
i want to upgrade the software version of my wlc4402-50-k9 but i don know how to go about it,cam anyone help with a step by step approach

Hi Moakofi,
This should get you started;
You can upgrade the Cisco WLC with either one of these methods:
GUI
Command-line interface (CLI)
When a controller is upgraded, the code on its associated access points is also automatically upgraded. When an access point loads code, each of its lights blinks in succession.
Note: Do not power down the controller or any access point during this process. Otherwise, you might corrupt the software image.
The upgrade of a controller with a large number of access points can take as long as 30 minutes. The access points must remain powered, and the controller must not be reset during this time.
Cisco recommends this sequence when you perform an upgrade:
Upload your controller configuration files to a server to back them up.
Turn off the controller 802.11a and 802.11b networks.
Upgrade your controller.
Re-enable your 802.11a and 802.11b networks.
This document provides the steps to follow in order to upgrade the WLC with each of these methods.
Wireless LAN Controller (WLC) Software Upgrade
From this good doc;
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00805f381f.shtml
Hope this helps!
Rob

I have the iPhone 5 and have with 6.0.1 software version. Although I had them when I moved from iPhone 4 to the 5, the latest update has most of my songs on the phone listed in grey (over 95% of them) and I can't play them. They are still listed though.

I have the iPhone 5 and have with 6.0.1 software version. Although I had them when I moved from iPhone 4 to the 5 (could play them), the latest update has most of my songs on the phone listed in grey (over 95% of them) and I can't play them. They are still listed in the iTunes library. When I look in the Summary for the iPhone, it shows Audio as only .16 GB - I have over 5 GB of songs, so what gives?
P.S. When I look at my Playlists most of the songs are greyed out. However, at the bottom of the list there is a cloud icon with a downward facing arrow. When I click on it each song starts to "load" and after a few minutes I have the songs back on in the list. I have to do this to all my playlists (I had over 100) in order to get access to all my songs. Then I did a sync and it happened again!
I use iCloud for documents and some other things (calendar, contact, etc.) but am not aware that I have anything music-wise in the cloud. Any thougnts?

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

Error trying to update iPhone to software version 1.0.2

I have just recently purchased an iPhone. I have no problem syncing it with iTunes. The only problem I have is every time I try to update the software version of my iPhone, it downloads the entire thing then an error message pops up as shown:
*"There was a problem downloading the iPhone software for the iPhone "name". An unknown error occured (-48).*
*Make sure your network settings are correct and your network connection is active, or try again later."*
I have received this error several times and no matter what I do, I can't get it to work. The phone is not hacked, I just purchased it 2 days ago. Its BRAND NEW. I even tried erasing all setting and info, and a restore. Still, nothing.
What am I doing wrong here? Is there something I need to do in the network settings of my iPhone? Or my cpu? I don't understand the error as I am connected to the internet.
Please, someone help me!
Thank you.

Thank you for your help. I did try to do a full restore, but had to pause the download. When I came back and resumed it, the download just kept going past the 92MB file. It went all the way up to 200MB of 92MB...I have no idea what is going on with that. So I just stopped it and deleted it.
But it takes almost an hour to download it from my connection and I didn't want to try it again. Maybe I will have to.
Any other suggestions?

I have just received an iphone 4 from a friend and it is in software version 4.3.2 still and will not update to latest version. It updates for about 3o minutes and then an error reading that my interent connection timed out? Any suggestions?

I have an Iphone 4 from a friend. It was never updated with him and now I am trying update to latest software version. It is currently in 4.3.2 and it updates till the last few seconds and then a message, with no error number, states that the internet connection had time out during update. I am using my PC and have tried unsuccessfully for a week. I have tried to restore setting on phone first before plugging in to PC and updating software through Itunes? I took it to my mobile phone outlet and they couldn't help? Is there another way?

Read through this:
http://support.apple.com/kb/ht1808

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message: "there was a problem downloading the software for the i

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?

look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once

I am unable to update my software version on my iPod touch. It gets to the very end and tells me that my session timed out. What should I do?

Every time I try and update my software version for my iPod touch from version 4.2.1 to version 4.3.5 I get within .5 MB (409.5 of 409.6MB) to the end and an error pops up telling me that my network connection has timed out so that the update could not be completed. I start the nursing program next week and need to download books onto my iPod, but it will not let me download the updated versions until my software is updated. I have tried restoring my iPod but when I restore it it says I have to download new software at the same time, therefore I can't even restore it. I just tried resetting my iPod and erasing all data as well as uninstalling iTunes and downloading it again and it still wont work. What do I do? I need to update it so it is ready for school in a week. Any advice? I have tried calling but as I understand I would have to pay for anyone to help me and I really don't want to do that until I have to.

Hi Jen. My daughter just compleated her nursing program and is now working as a full time nurse. Focus and study hard and soon you will be there too. Now to the problem at hand. I have the same problem. I gave up on it and satisfied myself with my iPod without the upgrade. Reason being I've read so many posts of people having problems after the upgrade. But I'm sure other factors are involved. Nevertheless here is the fix most say works to solve the problem: What ever virus protection you have installed on your computer, disable it. Then try to install the update. After that enable the protection. I had Kaspersky, and it does it's job well. The thinking is, the virus protection is blocking the upgrade. Hope this works. Charlie

Software versions on fieldpoint controller

Similar Messages

Maybe you are looking for