Software versions with thin APs
I'd appreciate an explanation of all the software version reported by the WiSM,
Below are all I can find.
It involves a WiSM with 1131AG AP (converted from autonomous to LWAPP).
S/W Version ............. 4.0.179.8 (obvious)
Boot Version ............ 12.3.7.1
Mini IOS Version ......... 3.0.51.0
IOS Version.............. 12.3(11)JA
When is each piece of software relevant?
Thanks
Mark,
The boot version has to do with what IOS is loaded initially to boot the AP.
The Mini IOS Version, is an LWAPP version that is initially loaded to start that communication, I think.
The IOS Version, is the currently running version of code on the AP that it has received from the controller.
Similar Messages
-
i am trying to update my Ipad 1 but it tells me i have no updates available under my general settings. i talked to someone on the phone yesterday and they said my software version is 2 updates behind. i paid for some aps and they will not open with my cu
You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+
-
I have the iPhone 5 and have with 6.0.1 software version. Although I had them when I moved from iPhone 4 to the 5 (could play them), the latest update has most of my songs on the phone listed in grey (over 95% of them) and I can't play them. They are still listed in the iTunes library. When I look in the Summary for the iPhone, it shows Audio as only .16 GB - I have over 5 GB of songs, so what gives?
P.S. When I look at my Playlists most of the songs are greyed out. However, at the bottom of the list there is a cloud icon with a downward facing arrow. When I click on it each song starts to "load" and after a few minutes I have the songs back on in the list. I have to do this to all my playlists (I had over 100) in order to get access to all my songs. Then I did a sync and it happened again!
I use iCloud for documents and some other things (calendar, contact, etc.) but am not aware that I have anything music-wise in the cloud. Any thougnts?You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.
-
I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once -
I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.
I get the message “Adobe Lightroom 1. Cannot be installed on this disk because a newer version of this software already exists on this disk”
If it is here – I cannot find it anywhere, and I don’t believe that I ever installed it.
I have ordered the upgrade to Lightroom 5.0 and figured that I should install Lightroom 1.0 first.
How can I solve this problemActually when LR 5 starts for the first time after it is installed it will have a dialog to Buy, Try or Enter a serial number. You select Enter a serial number and enter the LR 5 serial number first and then because it is an upgrade serial number it will ask for the serial number of a Previous version. You then enter the LR 1 serial number.
-
I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
Please suggest a solution or @Apple please get a software release which can remove this bug .We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
-
I have an older iPod Touch, Model MC086LL with an IOS software version of 4.2.1. Many of the applictions which I had previously purchased were recently upgraded and they no longer can be loaded on my iPod. What is the fix?
Reload older versions from iTunes on a computer, or buy a newer device.
(73016) -
Dear Community,
Please, kindly assist me with following challenges. I use iphone 3GS. I have used the phone for almost a year now. My iphone 3GS cannot connect to the itunes store. Each time I connect my phone to my Laptop through itunes. A message will automatically come up which states that "iTunes could not connect to the iTunes Store. An unknoown error occured (306)". It also make a footnote which states "make sure that your network connection ia active and try again". When I click the button labeled OK just below the messages, another message will come up which reads, "A new iphone software version (5.1) is available for the iphone software. Would you like to download it and update your iphone now?". It gives me the option buttons such as CANCEL or DOWNLOAD AND UPDATE or DOWNLOAD ONLY. If I click on DOWNLOAD AND UPDATE or DOWNLOAD ONLY. Another message will appear which states that "The iphone software update Server could not be conted" With a Footnote that states "Make sure your network settings are correct and your network connections is active, or try again later.
The above challenge has continued for more that 3 months now. This challenge has hindered me from installing some applications like Facebook Application for iphone, LinkedIn application for iphone and a lot of other applications. Each time I try to get these applications my iphone 3GS while inform that my current ios version 4.1 cannot work with the application, that they requires at least ios version 5.1 or above.
Please, I really need your kind assistance. I am ernestly waiting for responses.Dear Tim,
I saw your message. Below are the problems:
Whenever I connect my iphone 3GS to my PC through a USB. My itunes software comes up automatically.
1. After that a message appears from the itunes that states that 'itunes could not connect to the itunes store, an unknown error cccured (306).
2. After the above, an alert message comes up which states that A new iphone software version 5.1 is availlable for my iphone. It then states would you like to download it and update your iphone now? With the options buttons as Cancel or Download and Update or Download Only. Whenever I clicked on Download and Update or Download Only, the next message that comes up is that The iphone Software Update Server Could not be Contacted and suggest make sure your network setting are correct and active or try again later.
The above is the challenges I am facing now. -
I am using iphone 3gs and have accidentally clicked "update" to software version 5. However, after I failed and all my data was lost. I manage to restore back to my previous situation. But all my apps has been gone. How can I get back all my aps? I know I can get it by itunes but there are a few problems as below:
1. I have jailed break my iphone and I never purchased any apps from itunes
2. I have some important infomation saved in one of the apps called "awesome notes". How can I get it back? Is it store inside my computer? if so, how can i restore?
3. I am using window 7
I sincerely hope you guys can help me.
Regards,
Stephen Hongalrite. I have made my mistake. I should not jail break my iphone. So if I purchase my apps again from itunes is that mean mean my data will be back?
I hope you guys can giv me some support here since I am Apple genuine buyer. I could be wrong last time and now I turn over a new leaf and learn a lesson.
Please noted that I can always create new account to ask for the same questions without mention about "jailbreak" if I want to but obviously I won't do that. Please provide me your support! Thank you! -
Version 8.0 self installed the other day. My computer immediately began having problems. I uninstalled 8.0 TODAY and it just reinstalled itself. I NEVER use any software version that ends with .0 - please fix this problem or I'll switch to another browser
'''I fixed mine by removing the Ask.com extension.'''
Tools
Add-ons
Settings icon
View Recent Updates
Ask.com '''DISABLE'''
Running FF 8.0 on Windows 7 (64-bit) -
P2P blocking on ASA 5525 with Software Version 8.6(1)2
Hello,
We have Cisco ASA 5525 with Software Version 8.6(1)2. We have permitted all the traffic from inside to outside.
Now we want to block P2P sharing Bit torrent to internet sites. Please help me with the configuration.
We have DMZ setup & also inline IPS module.
Thanks in advance.
Regards,
Sandeshc Chavan.Hi Chavan ,
You can try to block this by port.
The well known TCP port for BitTorrent traffic is 6881-6889 (and 6969 for the tracker port).
The config is
Access-list BLOCK-P2P-TRAFFIC deny tcp any any range 6881 6889 log
And applies to the desire interface with the "Access-group command"
For example:
Access-group BLOCK-P2P-TRAFFIC outbound interface DMZ
However Blocking Bittorrent is challenging, and can't really be done effectively with port blocks. The standard ports are 6881-6889 TCP, but the protocol can be run on any port, and the peer-to-peer nature of the protocol means that discovering peers that use unblocked ports is simple.
Also you can execute from the cmd on windows the command netstat -a and check the port Bit torrent is using .
Hope this helps. -
N70 having a new software version working with Tom...
Hey everyone,
I have read a couple of threads talking about Nokia N70 & TomTom. Did anyone get there phones flashed with the new software version which is V5.0609.2.01, 01-03-06, RM-84? and is using the latest tomtom mobile 5 version 5.2 (443). I want to know how it works and what all problems still exits.
Cheers!Main problems are with the bluetooth connection being dropped.
I've had mine flashed to Version 5 firmware and it still drops the bluetooth connection to the GPS receiver.
I'm not using the genuine TomTom GPS receiver so that could be causing it.
It's not any way near as bad as version 2, that was rubbish the GPS connection dropped out every 20mins.
Then you had to switch the phone on/off to reset it.
IT's been a nightmare for alot of owners!! -
I have an iphone 3gs, iTunes says my software version (4.2.1) is upto date, how to I get it to upgrade the version?
I have a friend with the same make/model who is on version 5...Doesn't sound like you have a 3GS, but rather an iPhone 3. Settings>General>About>Model...what does it say?
-
I'm trying to update my iphone 3g with software version from 2.2.1 (5H11) to 2.2.1 and an unknown error occurred (-1)
eepereira wrote:
an unknown error occurred (-1)
That Error message is indicative of a Hardware issue. The Device may need Service. Take it in for evaluation. -
Pls i was trying to update my iphone 3G to software version 4.2 using itune. The process did not complete succesfully. I then decided to restore back my restore my prevoius version 4.1, it stopped with an error code1015. Pls i need help
Go here: http://www.iclarified.com/entry/index.php?enid=750 and download iOS 4.2.1 for the iPhone 3G. Perform a restore, but hold down ALT when clicking restore. Restore from this file you just downloaded. You should not get 1015 as you are upgrading, but if you get a different error, report back.
Maybe you are looking for
-
Problem building schema in JDeveloper with user defined complex type.
Hi, I am facing proble in JDeveloper while assigning input. 1. Used Oracle BPEL Database Adaper to access the procedure in Oracle DB which accepts input in the form of record typ in database. 2. XSD file is automatically created. 3. BPEL process WSDL
-
Need help importing Hi8 footage into FCE4
Hi all, I have a Sony Digital 8 TRV310 camcorder. I'd like to be able to import the Sony footage directly into FCE 4 but am having trouble. I've successfully imported Hi8 footage from the TRV310 into FCE 4 in the past (it's been a couple years) but f
-
Does anyone know if the new iPhone 5's earphones are also compatible with the iPhone 4s?
Does anyone know if the iPhone 5's earpods are compatible with the iPhone 4s? Thanx.
-
Some emails not reaching their destination
Since moving from MobileMe to iCloud some emails are not reaching their destination.
-
Call a view's method from Component Controller.
Hi Is it possible to call a view's method from Component Controller. Regards Nikhil