Sol 10 driver update issues!

Hey All;
I'm trying to install Solaris 10 1/06 (x86) from DVD onto our HP ProLiant DL585--we have 4 scsi disks, and I've configured the basic raid 5 array in the controller interface.
The problem happens when I try the driver update that's required in order for solaris to see the controller and disks. When we get to the 'select and installation type' menu, I'm picking "5 Apply driver updates", then choosing the floppy w/ the DU image from HP. That seems to go fine, but after it's extracted the driver to the miniroot system, I choose e for end (or maybe f for finished) and it goes straight into the interactive setup--there isn't an option to pick the solaris interactive text.
The problem with that is, the install hangs, and the solaris install manager screen says "failed to start the java VM" etc etc. It openes and interactive shell window, where I can run format and confirm that the disks are recognized now, but I can't seem to get any further. There is a note on the HP driver readme that says to select option 4 (solaris interactive text (console session), but I seem unable to specify the install option after doing the driver update.
Anyone have any advice for me? It's driving me slightly nutty at this point.

Hey All;
I'm trying to install Solaris 10 1/06 (x86) from DVD
onto our HP ProLiant DL585--we have 4 scsi disks, and
I've configured the basic raid 5 array in the
controller interface.
The problem happens when I try the driver update
that's required in order for solaris to see the
controller and disks. When we get to the 'select and
installation type' menu, I'm picking "5 Apply driver
updates", then choosing the floppy w/ the DU image
from HP. That seems to go fine, but after it's
extracted the driver to the miniroot system, I choose
e for end (or maybe f for finished) and it goes
straight into the interactive setup--there isn't an
option to pick the solaris interactive text.
The problem with that is, the install hangs, and the
solaris install manager screen says "failed to start
the java VM" etc etc. It openes and interactive shell
window, where I can run format and confirm that the
disks are recognized now, but I can't seem to get any
further. There is a note on the HP driver readme that
says to select option 4 (solaris interactive text
(console session), but I seem unable to specify the
install option after doing the driver update.
Anyone have any advice for me? It's driving me
slightly nutty at this point.Yes you will not be able to select option 4, it directly boots with option 1.
Now if you want to continue installation with option 4 then, install the drivers, and continue with the installation.
Hit escape when you see the �Proposed Window system configuration for installation� screen.... to go to the �Current or Proposed Window System Configuration� screen. Select �F3� in the �Current or Proposed Window System Configuration� and the install will proceed as a text install.
hope this will help.....

Similar Messages

Radeon HD 6970M driver update issue

I just got Battle Field 3 and it said i needed driver updates to my graphics card in order to play. So I went and tried to update like a fool without looking to see how on bootcamp. I updated to the latest driver and now my display resolution is limited to 1600x1200. It wont give me the option to go up to the native resolution of 2560x1440. I know I probably did a lot wrong, but is there anyway to fix this?

I tried using the update to 9.2 (12.1 Catalyst) update technique, the one when graphic card shows as 6700M, but the drivers still froze my comp and had to manualy restart the laptop (this happens only when in fixed mode, otherwise while in dynamic mode it says the driver stoped responding but recovered and/or it just switches to the working graphic card).
Dont know why, but I am having a lot of issues with AMD drivers lattely and cant seem to get a stable driver setup, even when using the older offical version (in the link above). Acctualy this is also the reason why I would like to update my drivers, since stability was the only reason I was using obsolete drivers in the first place.
Is there any way to update drivers to the latest version, or close to the latest version, that works for all those hybrid HP laptops?
If any more info is needed please let me know...

Jan 2014 Imaging driver update issues

I upgraded my ZCM Primary server from 11.2.2 to 11.2.4 over the weekend. Today I downloaded the Jan 2014 Imaging Driver update from the 11.2.4 patches page. I downloaded the zenworks11.2.4_MU1_Jan14 that said it was for 11.2.4 and 11.2.4 MU1. I followed the readme.txt file that says to run the imaging_driver_update.bat file. I ran this and I get:
"Applying wrong imagin driver updates........Exiting driver update."
Does anyone have any solutions to get this fixed up? If I go to %zenworks_home%\share\preboot\update and look at the ZUpdate.sig file it shows 112303 for the [zen_client_version] If I go into the ZCC management page and look under the primary server all of the version show correct as being 11.2.4.
Thanks for any information you can give. I also cannot PXE boot at this time as well. It gets through PXE fine and I choose "Start Zenworks Imaging Maintenance" from the Imaging menu screen and then it starts loading but then pops up "cannot connect to Zenworks repository" or something like that. I don't have it right in front of me now.
Thanks for any help.
Andrew
Network Administrator
West York Area School District

Marceldejager,
> Anyone any idea's?
yes - read the screen when you go to the November Update you are redirected to the Monthly Update, sure - but at the top, with a bright yellow background are the words
"You have been automatically redirected to this patch because it supercedes the patch you originally requested. The patch you originally requested is still downloadable, click here to download it instead of this newer patch."
if you click on the link it takes you to the patch you want...
Shaun Pond (now working for ENGL)
newly reminted as a Knowledge Professional

Satellite C660-23M - graphic driver update issue

New to this forum so dont know if this problem has been covered.
Have installed Photoshop elements 11 and premier elements 11.
The elements program runs ok but cannot get get premier elements to open new project. Adobe advised trying to update drivers which I have tried without success.
When running driver update on laptop it says latest driver installed. 8.15.10.2189
On checking Toshiba update site it shows later version 8.15.10.2353.
Have downloaded this ,I then unzipped it and it says will start automatic installation when finished but nothing happens.
Have tried several times but once unzipped it will not install.
Any help would be appreciated and infact confirmation of latest driver.

Just done a direct x scan and this is an extract of results.
"Time of this report: 11/9/2012, 14:51:13
Machine name: KEITHR-TOSH
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120830-0333)
Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
System Model: Satellite C660
BIOS: Phoenix SecureCore Version 2.00
Processor: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz (4 CPUs), ~2.4GHz
Memory: 6144MB RAM
Available OS Memory: 5938MB RAM
Page File: 3592MB used, 8282MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 64bit Unicode
Shows DX Setup Parameters: Not found
does this mean something is missing and not starting up?

HP Compaq 6530b Fingerprint scanner Driver update issue

I tried to install a fingerprint scanner driver directly from the support page of my computer(http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3687781&swItemId=ob_82368_1&swEnvOid=4053... and when I tried to install, I got an error message as follows:
INFO: ****************************************
INFO: 12/09/2014 13:29:34
INFO: Product Version 2.1.0.0.
INFO: Version: 6.0.6000
INFO: Platform ID: 2 (NT)
INFO: Service Pack: 0.0
INFO: Suite: 0x0100, Product Type: 1
INFO: Architecture: AMD64.
INFO: Running under Local System Account
INFO: Interactive Windows Station
INFO: Command Line: '"C:\Program Files\Fingerprint Sensor\Drivers\DPInst.exe" /SW /LM /SA /F /PATH "C:\Program Files\Fingerprint Sensor\DRIVERS"'
INFO: DPInst is a multi-lingual binary.
INFO: ****************************************
INFO: Current working directory: 'C:\Program Files\Fingerprint Sensor\Drivers'
INFO: Running on path 'C:\Program Files\Fingerprint Sensor\DRIVERS'
INFO: No valid 'dpinst.xml' file provided.
INFO: Install option set: Suppressing Wizard but no OS popups.
INFO: Install option set: legacy mode on.
INFO: Install option set: Force install if driver is not better.
INFO: Install option set: Suppress Add or Remove Programs entries.
INFO: Found driver package: 'C:\Program Files\Fingerprint Sensor\DRIVERS\ATSwpWDF.inf'.
INFO: Preinstalling 'c:\program files\fingerprint sensor\drivers\atswpwdf.inf' ...
INFO: ENTER: DriverPackagePreinstallW
SUCCESS:c:\program files\fingerprint sensor\drivers\atswpwdf.inf is preinstalled.
INFO: RETURN: DriverPackagePreinstallW (0x0)
INFO: ENTER: DriverPackageGetPathW
INFO: RETURN: DriverPackageGetPathW (0x0)
INFO: ENTER: DriverPackageInstallW
WARNINGRIVER_PACKAGE_LEGACY_MODE flag set but not supported on Plug and Play driver on VISTA. Flag will be ignored.
INFO: Installing INF file 'c:\program files\fingerprint sensor\drivers\atswpwdf.inf' (Plug and Play).
INFO: Looking for Model Section [AuthentecModels.NTamd64]...
INFO: Installing devices with Id "USB\VID_08FF&PID_2810&REV_1703" using INF "C:\Windows\System32\DriverStore\FileRepository\atswpwdf.inf_amd64_neutral_1157314f3152342c\atswpwdf.inf".
INFO: ENTER UpdateDriverForPlugAndPlayDevices...
SUCCESS:RETURN UpdateDriverForPlugAndPlayDevices.
INFO: Installation was successful.
SUCCESS:Install completed
INFO: RETURN: DriverPackageInstallW (0x0)
INFO: Successfull installation of 'c:\program files\fingerprint sensor\drivers\atswpwdf.inf'.
INFO: Returning with code 0x1
INFO: 12/09/2014 13:29:38
INFO: ****************************************
INFO: 12/09/2014 13:41:23
INFO: Product Version 2.1.0.0.
INFO: Version: 6.0.6000
INFO: Platform ID: 2 (NT)
INFO: Service Pack: 0.0
INFO: Suite: 0x0100, Product Type: 1
INFO: Architecture: X86.
INFO: Interactive Windows Station
INFO: Command Line: 'Dpinst32.exe /SW /LM /SA /F'
INFO: DPInst is not multi-lingual.
INFO: ****************************************
INFO: Current working directory: 'C:\swsetup\SP47728'
INFO: Running on path 'C:\swsetup\SP47728'
INFO: No valid 'dpinst.xml' file provided.
ERROR: System requires 64-bit version of DPInst.exe.
INFO: Returning with code 0x80000000
INFO: 12/09/2014 13:41:23
INFO: ****************************************
INFO: 12/09/2014 13:42:03
INFO: Product Version 2.1.0.0.
INFO: Version: 5.1.2600 Service Pack 2
INFO: Platform ID: 2 (NT)
INFO: Service Pack: 2.0
INFO: Suite: 0x0100, Product Type: 1
INFO: Architecture: X86.
INFO: Interactive Windows Station
INFO: Command Line: 'Dpinst32.exe /SW /LM /SA /F'
INFO: DPInst is not multi-lingual.
INFO: ****************************************
INFO: Current working directory: 'C:\swsetup\SP47728'
INFO: Running on path 'C:\swsetup\SP47728'
INFO: No valid 'dpinst.xml' file provided.
ERROR: System requires 64-bit version of DPInst.exe.
INFO: Returning with code 0x80000000
INFO: 12/09/2014 13:42:03
INFO: ****************************************
INFO: 12/09/2014 13:48:07
INFO: Product Version 2.1.0.0.
INFO: Version: 6.0.6000
INFO: Platform ID: 2 (NT)
INFO: Service Pack: 0.0
INFO: Suite: 0x0100, Product Type: 1
INFO: Architecture: AMD64.
INFO: Interactive Windows Station
INFO: Command Line: 'C:\Users\DEFAUL~1.DEF\AppData\Local\Temp\DL2.tmp\NIVO\DpInst.exe /q /se'
INFO: DPInst is a multi-lingual binary.
INFO: ****************************************
INFO: Current working directory: 'C:\Users\DEFAUL~1.DEF\AppData\Local\Temp\DL2.tmp\NIVO'
INFO: Running on path 'C:\Users\DEFAUL~1.DEF\AppData\Local\Temp\DL2.tmp\NIVO'
INFO: User UI Language is 0x409.
INFO: Install option set: Running in quiet mode. Suppressing Wizard and OS popups.
INFO: Install option set: legacy mode on.
INFO: Install option set: Suppressing EULA.
INFO: Install option set: Suppress Add or Remove Programs entries.
INFO: Found driver package: 'C:\Users\DEFAUL~1.DEF\AppData\Local\Temp\DL2.tmp\NIVO\DisplayLinkUsb.inf'.
INFO: Preinstalling 'c:\users\defaul~1.def\appdata\local\temp\dl2.tmp\nivo\displaylinkusb.inf' ...
INFO: ENTER: DriverPackagePreinstallW
SUCCESS:c:\users\defaul~1.def\appdata\local\temp\dl2.tmp\nivo\displaylinkusb.inf is preinstalled.
INFO: RETURN: DriverPackagePreinstallW (0x0)
INFO: ENTER: DriverPackageGetPathW
INFO: RETURN: DriverPackageGetPathW (0x0)
INFO: ENTER: DriverPackageInstallW
WARNINGRIVER_PACKAGE_LEGACY_MODE flag set but not supported on Plug and Play driver on VISTA. Flag will be ignored.
INFO: Installing INF file 'c:\users\defaul~1.def\appdata\local\temp\dl2.tmp\nivo\displaylinkusb.inf' (Plug and Play).
INFO: Looking for Model Section [Devices.ntamd64]...
INFO: No matching devices found in INF "C:\Windows\System32\DriverStore\FileRepository\displaylinkusb.inf_amd64_neutral_e907fbad491ddaa4\displaylinkusb.inf" on the Machine.
INFO: No drivers installed. No devices found that match driver(s) contained in 'C:\Windows\System32\DriverStore\FileRepository\displaylinkusb.inf_amd64_neutral_e907fbad491ddaa4\displaylinkusb.inf'.
INFO: RETURN: DriverPackageInstallW (0xE000020B)
INFO: No matching device was found for 'c:\users\defaul~1.def\appdata\local\temp\dl2.tmp\nivo\displaylinkusb.inf'. Driver will be installed when plugged in.
INFO: Returning with code 0x100
INFO: 12/09/2014 13:48:15
INFO: ****************************************
INFO: 12/09/2014 13:48:15
INFO: Product Version 2.1.0.0.
INFO: Version: 6.0.6000
INFO: Platform ID: 2 (NT)
INFO: Service Pack: 0.0
INFO: Suite: 0x0100, Product Type: 1
INFO: Architecture: AMD64.
INFO: Interactive Windows Station
INFO: Command Line: 'C:\Users\DEFAUL~1.DEF\AppData\Local\Temp\DL2.tmp\ASIX\x64\win7\DpInst.exe /q /se'
INFO: DPInst is a multi-lingual binary.
INFO: ****************************************
INFO: Current working directory: 'C:\Users\DEFAUL~1.DEF\AppData\Local\Temp\DL2.tmp\ASIX\x64\win7'
INFO: Running on path 'C:\Users\DEFAUL~1.DEF\AppData\Local\Temp\DL2.tmp\ASIX\x64\win7'
INFO: User UI Language is 0x409.
INFO: Install option set: Running in quiet mode. Suppressing Wizard and OS popups.
INFO: Install option set: legacy mode on.
INFO: Install option set: Suppressing EULA.
INFO: Install option set: Suppress Add or Remove Programs entries.
INFO: Found driver package: 'C:\Users\DEFAUL~1.DEF\AppData\Local\Temp\DL2.tmp\ASIX\x64\win7\Ax88772.inf'.
INFO: Preinstalling 'c:\users\defaul~1.def\appdata\local\temp\dl2.tmp\asix\x64\win7\ax88772.inf' ...
INFO: ENTER: DriverPackagePreinstallW
SUCCESS:c:\users\defaul~1.def\appdata\local\temp\dl2.tmp\asix\x64\win7\ax88772.inf is preinstalled.
INFO: RETURN: DriverPackagePreinstallW (0x0)
INFO: ENTER: DriverPackageGetPathW
INFO: RETURN: DriverPackageGetPathW (0x0)
INFO: ENTER: DriverPackageInstallW
WARNINGRIVER_PACKAGE_LEGACY_MODE flag set but not supported on Plug and Play driver on VISTA. Flag will be ignored.
INFO: Installing INF file 'c:\users\defaul~1.def\appdata\local\temp\dl2.tmp\asix\x64\win7\ax88772.inf' (Plug and Play).
INFO: Looking for Model Section [USB.NTamd64]...
INFO: No matching devices found in INF "C:\Windows\System32\DriverStore\FileRepository\ax88772.inf_amd64_neutral_eb961649dbff943e\ax88772.inf" on the Machine.
INFO: No drivers installed. No devices found that match driver(s) contained in 'C:\Windows\System32\DriverStore\FileRepository\ax88772.inf_amd64_neutral_eb961649dbff943e\ax88772.inf'.
INFO: RETURN: DriverPackageInstallW (0xE000020B)
INFO: No matching device was found for 'c:\users\defaul~1.def\appdata\local\temp\dl2.tmp\asix\x64\win7\ax88772.inf'. Driver will be installed when plugged in.
INFO: Returning with code 0x100
INFO: 12/09/2014 13:48:16
INFO: ****************************************
INFO: 12/09/2014 13:48:16
INFO: Product Version 2.1.0.0.
INFO: Version: 6.0.6000
INFO: Platform ID: 2 (NT)
INFO: Service Pack: 0.0
INFO: Suite: 0x0100, Product Type: 1
INFO: Architecture: AMD64.
INFO: Interactive Windows Station
INFO: Command Line: 'C:\Users\DEFAUL~1.DEF\AppData\Local\Temp\DL2.tmp\SMSC\x64\DpInst.exe /q /se'
INFO: DPInst is a multi-lingual binary.
INFO: ****************************************
INFO: Current working directory: 'C:\Users\DEFAUL~1.DEF\AppData\Local\Temp\DL2.tmp\SMSC\x64'
INFO: Running on path 'C:\Users\DEFAUL~1.DEF\AppData\Local\Temp\DL2.tmp\SMSC\x64'
INFO: User UI Language is 0x409.
INFO: Install option set: Running in quiet mode. Suppressing Wizard and OS popups.
INFO: Install option set: legacy mode on.
INFO: Install option set: Suppressing EULA.
INFO: Install option set: Suppress Add or Remove Programs entries.
INFO: Found driver package: 'C:\Users\DEFAUL~1.DEF\AppData\Local\Temp\DL2.tmp\SMSC\x64\Driver\net9500-x64-n51f.inf'.
INFO: Preinstalling 'c:\users\defaul~1.def\appdata\local\temp\dl2.tmp\smsc\x64\driver\net9500-x64-n51f.inf' ...
INFO: ENTER: DriverPackagePreinstallW
SUCCESS:c:\users\defaul~1.def\appdata\local\temp\dl2.tmp\smsc\x64\driver\net9500-x64-n51f.inf is preinstalled.
INFO: RETURN: DriverPackagePreinstallW (0x0)
INFO: ENTER: DriverPackageGetPathW
INFO: RETURN: DriverPackageGetPathW (0x0)
INFO: ENTER: DriverPackageInstallW
WARNINGRIVER_PACKAGE_LEGACY_MODE flag set but not supported on Plug and Play driver on VISTA. Flag will be ignored.
INFO: Installing INF file 'c:\users\defaul~1.def\appdata\local\temp\dl2.tmp\smsc\x64\driver\net9500-x64-n51f.inf' (Plug and Play).
INFO: Looking for Model Section [SMSC.ntamd64]...
INFO: No matching devices found in INF "C:\Windows\System32\DriverStore\FileRepository\net9500-x64-n51f.inf_amd64_neutral_550b66a16278e2ac\net9500-x64-n51f.inf" on the Machine.
INFO: No drivers installed. No devices found that match driver(s) contained in 'C:\Windows\System32\DriverStore\FileRepository\net9500-x64-n51f.inf_amd64_neutral_550b66a16278e2ac\net9500-x64-n51f.inf'.
INFO: RETURN: DriverPackageInstallW (0xE000020B)
INFO: No matching device was found for 'c:\users\defaul~1.def\appdata\local\temp\dl2.tmp\smsc\x64\driver\net9500-x64-n51f.inf'. Driver will be installed when plugged in.
INFO: Returning with code 0x100
INFO: 12/09/2014 13:48:17
INFO: ****************************************
INFO: 01/02/2015 23:01:58
INFO: Product Version 2.1.0.0.
INFO: Version: 6.0.6000
INFO: Platform ID: 2 (NT)
INFO: Service Pack: 0.0
INFO: Suite: 0x0100, Product Type: 1
INFO: Architecture: AMD64.
INFO: Running under Local System Account
INFO: Interactive Windows Station
INFO: Command Line: '"C:\Program Files\Fingerprint Sensor\Drivers\DPInst64.exe" /SW /LM /SA /F /PATH "C:\Program Files\Fingerprint Sensor\DRIVERS"'
INFO: DPInst is not multi-lingual.
INFO: ****************************************
INFO: Current working directory: 'C:\Program Files\Fingerprint Sensor\Drivers'
INFO: Running on path 'C:\Program Files\Fingerprint Sensor\DRIVERS'
INFO: No valid 'dpinst.xml' file provided.
INFO: Install option set: Suppressing Wizard but no OS popups.
INFO: Install option set: legacy mode on.
INFO: Install option set: Force install if driver is not better.
INFO: Install option set: Suppress Add or Remove Programs entries.
INFO: Found driver package: 'C:\Program Files\Fingerprint Sensor\DRIVERS\ATSwpWDF.inf'.
INFO: Preinstalling 'c:\program files\fingerprint sensor\drivers\atswpwdf.inf' ...
INFO: ENTER: DriverPackagePreinstallW
SUCCESS:c:\program files\fingerprint sensor\drivers\atswpwdf.inf is preinstalled.
INFO: RETURN: DriverPackagePreinstallW (0x0)
INFO: ENTER: DriverPackageGetPathW
INFO: RETURN: DriverPackageGetPathW (0x0)
INFO: ENTER: DriverPackageInstallW
WARNINGRIVER_PACKAGE_LEGACY_MODE flag set but not supported on Plug and Play driver on VISTA. Flag will be ignored.
INFO: Installing INF file 'c:\program files\fingerprint sensor\drivers\atswpwdf.inf' (Plug and Play).
INFO: Looking for Model Section [AuthentecModels.NTamd64]...
INFO: Installing devices with Id "USB\VID_08FF&PID_2810&REV_1703" using INF "C:\Windows\System32\DriverStore\FileRepository\atswpwdf.inf_amd64_neutral_8b9c048d5b92211d\atswpwdf.inf".
INFO: ENTER UpdateDriverForPlugAndPlayDevices...
SUCCESS:RETURN UpdateDriverForPlugAndPlayDevices.
INFO: Installation was successful.
SUCCESS:Install completed
INFO: RETURN: DriverPackageInstallW (0x0)
INFO: Successfull installation of 'c:\program files\fingerprint sensor\drivers\atswpwdf.inf'.
INFO: Returning with code 0x1
INFO: 01/02/2015 23:03:02
INFO: ****************************************
INFO: 04/14/2015 17:51:40
INFO: Product Version 2.1.0.0.
INFO: Version: 6.0.6000
INFO: Platform ID: 2 (NT)
INFO: Service Pack: 0.0
INFO: Suite: 0x0100, Product Type: 1
INFO: Architecture: X86.
INFO: Interactive Windows Station
INFO: Command Line: 'Dpinst32.exe /SW /LM /SA /F'
INFO: DPInst is not multi-lingual.
INFO: ****************************************
INFO: Current working directory: 'C:\swsetup\SP47728'
INFO: Running on path 'C:\swsetup\SP47728'
INFO: No valid 'dpinst.xml' file provided.
ERROR: System requires 64-bit version of DPInst.exe.
INFO: Returning with code 0x80000000
INFO: 04/14/2015 17:51:40
INFO: ****************************************
INFO: 04/14/2015 17:52:32
INFO: Product Version 2.1.0.0.
INFO: Version: 5.1.2600 Service Pack 2
INFO: Platform ID: 2 (NT)
INFO: Service Pack: 2.0
INFO: Suite: 0x0100, Product Type: 1
INFO: Architecture: X86.
INFO: Interactive Windows Station
INFO: Command Line: 'Dpinst32.exe /SW /LM /SA /F'
INFO: DPInst is not multi-lingual.
INFO: ****************************************
INFO: Current working directory: 'C:\Drivers'
INFO: Running on path 'C:\Drivers'
INFO: No valid 'dpinst.xml' file provided.
ERROR: System requires 64-bit version of DPInst.exe.
INFO: Returning with code 0x80000000
INFO: 04/14/2015 17:52:32
INFO: ****************************************
INFO: 04/14/2015 17:53:47
INFO: Product Version 2.1.0.0.
INFO: Version: 5.1.2600 Service Pack 2
INFO: Platform ID: 2 (NT)
INFO: Service Pack: 2.0
INFO: Suite: 0x0100, Product Type: 1
INFO: Architecture: X86.
INFO: Interactive Windows Station
INFO: Command Line: 'Dpinst32.exe /SW /LM /SA /F'
INFO: DPInst is not multi-lingual.
INFO: ****************************************
INFO: Current working directory: 'C:\swsetup\SP47728'
INFO: Running on path 'C:\swsetup\SP47728'
INFO: No valid 'dpinst.xml' file provided.
ERROR: System requires 64-bit version of DPInst.exe.
INFO: Returning with code 0x80000000
INFO: 04/14/2015 17:53:47
INFO: ****************************************
INFO: 04/14/2015 17:54:24
INFO: Product Version 2.1.0.0.
INFO: Version: 5.1.2600 Service Pack 2
INFO: Platform ID: 2 (NT)
INFO: Service Pack: 2.0
INFO: Suite: 0x0100, Product Type: 1
INFO: Architecture: X86.
INFO: Interactive Windows Station
INFO: Command Line: 'Dpinst32.exe /SW /LM /SA /F'
INFO: DPInst is not multi-lingual.
INFO: ****************************************
INFO: Current working directory: 'C:\swsetup\SP47728'
INFO: Running on path 'C:\swsetup\SP47728'
INFO: No valid 'dpinst.xml' file provided.
ERROR: System requires 64-bit version of DPInst.exe.
INFO: Returning with code 0x80000000
INFO: 04/14/2015 17:54:24
Anyone have any idea what to do?

Hi @Anni_V
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you updated your system to Windows 7 professional. All was working well until an automated Windows update was installed and now the fingerprint reader is not working.
You have tried to reinstalling the original driver but receive an error when trying to uninstall it.
Would you try deleting the driver and not uninstalling it.
There is also a Digital Persona Fingerprint Reader Software(null) ,have you tried deleting/uninstalling and reinstalling it?
If the issue remains, as it was working until the update was installed you can try a restore or removing that particular update.
Using Microsoft System Restore (Windows 7)
To view the installed updates go to the control panel/programs and features/view installed updates.
If you believe the updates caused the issue you can
If the recovery partition is still intact you could try reinstalling the driver from it. Using Recovery Manager to Restore Software and Drivers (Windows 7)
I hope this helps!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

NVIDIA GeForce 9400M Driver update issue

After entering the information in the NVIDIA driver search, I'm being told that the latest driver is the "Quadro Mac OS X Driver Release 256". However, after downloading it and trying to install the driver I keep getting an error that says "this computer will not support this NVIDIA graphics solution".
I've installed the latest CUDA drivers beforehand like it says, and that has worked out fine. Not sure what I'm missing with this though.

I'm getting the driver from the official NVIDIA website.
That is the problem. The only place to download any type of updates for a Mac are from Software Update, otherwise you will run into issues such as the one you just experienced. I'm guessing you may have come from the Windows world where it's regular practice to have to go searching for new drivers, with OS X you no longer have to do this. Run Software Update and if it finds updates for your machine install them. You can also set Software Update to check on a regular basis in System Preferences - Software Update.

Driver update issues?: wireless LAN no longer works

Hi,
I'm using an X200 (7458-CTO, XP SP3). For a week (or a couple?) I've been unable to use Access Connections (AC) to get my wireless to work. When I uninstall-reinstall the driver (for the 5300 AGN) I can get Windows to do it for me -- but I have no luck with AC.
Posters with the same problem -- but other makes/models, usually T60's or T61's -- have suggested that it was related to updating several (4-5) drivers; this issue was solved in their forum (see thread titled "Access Connections 4.52 upgrade: fails to detect any WiFi networks"). The solution, however, appears to be specific to the T60-61.
This issue is not debilitating, but it *is* annoying, since it requires uninstalling-reinstalling the driver each and every time I go online, and I can't use AC (which I previously loved).
Ideas?

Hi denaliwoman,
Welcome to the Lenovo forum
If it were me, I would simply remove Access Connections, and use the standard XP wireless tools. But it sounds like you much prefer to use AC... may I ask why?
Best regards,
Frank
Edit: Just came across this post, which may help if you want to keep Access Connections.
Message Edited by fmyhr on 2009-07-12 11:03 AM
Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
Did someone help you?
Say thanks! with a kudo.
Even better: Pay it forward, help someone else.

Synaptic TouchPad Driver update issue

I am having issues with the touchpad update. I have a HP 15, non touch screen version, and the update will download but fail to install. Is this an issue with the udate it self or is it something to do with my PC?

Hi there @smiling_guy92
I understand that your touchpad drivers did not update properly. I am happy to help with this.
I assume you are using the HP Support Assistant for your updates. With that in mind, please see the following, which should help with any issues with that software.
HP PCs - Troubleshooting HP Support Assistant (Windows 8)
Using HP Support Assistant (Windows 8)
If however you still have trouble or it is not the HP support assistant that you are having problems with, please post the full product number and verify the operating system in use on your notebook. See the following documents if you need help in finding those.
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

HP Envy 15 1050NR Notebook PC ATI Driver Update Issue

I have the following computer:
HP Envy 15 Notebook PC (15-1050NR)
ATI Mobility Radeon HD 4830 Series (Driver Version: 8.712.0.0)
It has the latest driver from HP (circa 2010).
Since we can't use the AMD updates for this card, and HP hasn't updated, I am unable to play games like Titan Fall or Planetary Annihilation, even though I meet the hardware requirements.

I have tried this in the past before, and got the blue screen of death. Just in case your link was different, I did try it too. But still got the blue screen of death.
System Information
Time of this report: 9/26/2014, 22:26:25
Machine name: REFLEX_POINT
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120305-1505)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: HP Envy 15 Notebook PC
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz (8 CPUs), ~1.6GHz
Memory: 6144MB RAM
Available OS Memory: 6134MB RAM
Page File: 2733MB used, 9534MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
Display Devices
Card name: ATI Mobility Radeon HD 4830 Series
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter (0x94A0)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_94A0&SUBSYS_7009103C&REV_00
Display Memory: 3826 MB
Dedicated Memory: 1015 MB
Shared Memory: 2811 MB
Current Mode: 1920 x 1080 (32 bit) (59Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: unknown
Monitor Id: LGD01FB
Native Mode: 1920 x 1080(p) (59.934Hz)
Output Type: Internal
Driver Name: atiu9p64.dll,aticfx64.dll,atiu9pag,aticfx32,atiumd64.dll,atidxx64.dll,atiumdag,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.14.0001.6099 (English)
Driver Version: 8.712.0.0
DDI Version: 10.1
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 3/3/2010 00:06:36, 28160 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71EE2-D7E0-11CF-5F64-0850A1C2C535}
Vendor ID: 0x1002
Device ID: 0x94A0
SubSys ID: 0x7009103C
Revision ID: 0x0000
Driver Strong Name: oem43.inf:ATI.Mfg.NTamd64.6.1:ati2mtag_M9x7:8.712.0.0ci\ven_1002&dev_94a0&subsys_7009103c
Rank Of Driver: 00E60001
Video Accel: ModeMPEG2_A ModeMPEG2_C
Hopefully, the above information will help you help me. Thanks.

Satellite L670-1KZ - driver update & issue with ARMA II game

Hi everybody,
I just bought this satellite L670-1KZ in France, and I already found fews updates.
But, before doing anything I wish to have comment and recommandation from others owners, to make sure the files I have in hand are useful and will not damaged anything (never know).
1) UPDATE RECOMMANDED OR NOT ?
This is the list of the update I found :
Ati Radeon Mobility HD 2000/3000/4000/5000/6000 version 11.3 WHQL
Fabricant : ATI Technologies Inc.
Version : 8.831.2.0000
Nom du fichier inf : c7115930.inf
Date du fichier inf : 08/03/2011
Date de publication (mise en ligne) : 30/03/2011
Realtek Pilote High Definition Audio version R2.57 WHQL
Fabricant : Realtek Semiconductor Corp.
Version : 6.0.1.6299
Nom du fichier inf : hdapcee3.inf
Date du fichier inf : 25/01/2011
Date de publication (mise en ligne) : 09/02/2011
Realtek RTL8100/8101/8102/8103/8105/8401/8110/8111/8168/8169 version 7.037.1229.2010 WHQL
Fabricant : Realtek
Version : 7.037.1229.2010
Nom du fichier inf : rt64win7.inf
Date du fichier inf : 29/12/2010
Date de publication (mise en ligne) : 09/02/2011
Realtek RTL8191SE-VA2/RTL8192SE version 2019.1.1203.2010 WHQL
Fabricant : Realtek Semiconductor Corp.
Version : 2019.1.1203.2010
Nom du fichier inf : net8192se.inf
Date du fichier inf : 03/12/2010
Date de publication (mise en ligne) : 09/02/2011
Intel Chipset Device Software version 9.2.0.1025 WHQL
Fabricant : Intel
Version : 7.0.0.1013
Nom du fichier inf : ibexahci.inf
Date du fichier inf : 08/06/2010
Date de publication (mise en ligne) : 09/03/2011
Intel Rapid Storage Technology ICH7/ICH8/ICH9/ICH10/PCH version 10.1.0.1008 WHQL
Fabricant : Intel
Version : 10.1.0.1008
Nom du fichier inf : iaahci.inf
Date du fichier inf : 06/11/2010
Date de publication (mise en ligne) : 21/12/2010
2) ABOUT THE VIDEO CARD :
Also, before I had a Amilo Xi 2550-8009 that melt last week, I changed it for this Toshiba, but I am facing a problem with a game ARMA II.
The error message I got is : "Error compiling pixel shader", with black screen and a "ping" noise.
I don't understand because I found a comparative test with a GeForce and my current HD5650 that is supposed to support this shader stuff.
Did you manage to run ARMA II on your laptop ? If yes, what did I miss ?
Thanks in advance for your feedback fully appreciated,
G2MARS

Hi Syntax,
yes agree, you're so right, I just got 3BDO within 20 minutes today, still trying to understand why.
Signature du problme*:
Nom dvnement de problme: BlueScreen
Version du systme: 6.1.7601.2.1.0.768.3
Identificateur de paramtres rgionaux: 1036
Informations supplmentaires sur le problme*:
BCCode: d1
BCP1: 0000000000000028
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF8800176EB2D
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
It might come from those damned update I did.... The last one is about the video card on the pilot update through driver device, right click, update.
I was surprised he did it, but, I suspect I had a BDO before that, can't remember.
Then... Still trying to identify the reason, I might go back to the older pilot version.
About Arma 2,on the very good website "Can I run it" it said there was a problem with the video card
Video Card
Recommended: NVIDIA GeForce 8800 GT / ATI Radeon HD 4850 with Shader Model 3 and 512 MB VRAM or faster
You Have: ATI Mobility Radeon HD 5650
Upgrade Suggested: Unfortunately, your Video Card does not meet this requirement. In the other hand I found this website with a test that compared the HD5650 with a GeForce, they said :
"La Mobility Radeon HD 5650 se montre ici bien plus performante que le GeForce GT 420M qui se relgu la dernire place par le GT 330M, plus performant sur ce jeu galement."
The HD5650 is more performant than the GeForce GT 420M .... If you understand something let me know cause I don't !
[TEST ATI and GEFORCE|http://www.clubic.com/carte-graphique/carte-graphique-nvidia/geforce-400-series/article-363820-3-test-nvidia-geforce-gt-420m.html]
Amazing, because this game ran on my Amilo xi 2550-8009 and a ATI Radeon HD 2700 256 Mo.
And Arma II Operation Arrowhead didn't show this error message, but, didn't run so well even with low graphic option,I just downloaded a ultimate patch v1.59, to be followed.

Lenovo G700 Nvidia Driver Update Issue

I have a new G700 which has outdated graphics drivers on it. I've tried both installing the drivers manually from Nvidia, and by also using the GeForce Experience software to install the drivers, and both give me an error that states "This graphics could not find supported graphics hardware." What do I need to do to install the current drivers for this notebook?

I tried to change the BIOS settings, however the only graphics options I'm presented with are the choice between "Optimus" or "UMA-Only." From what I understand, the latter sets it so that only the integrated (Intel HD) graphics are used and the Optimus utilizes switching techology. I would be fine with the switching if I could actually find a way to see that it works, as I've yet to see it switch over to the nvidia card.
The card was installed by Lenovo and came installed with the new notebook purchase.

Driver update for Win 7 USB issue on nVidia chipset systems now available

This patch is needed for the TouchSmart 600 AIO Desktop series if you haven't installed it.
http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for-Win7-USB-issue-on-nVidia-chipse...

The update is not part of the desktop Win7 update disc from MS or HP - Microsoft has not yet integrated it into Win7, and it is not yet available on Windows Update (it is likely to hit there sometime in January). It was available too late to get it out on HP Update before the holiday break. I don't believe there have been any rolls to the Win7 upgrade disks. I do recommend (while still on Vista) running HP Update and installing all applicable updates - PRIOR to doing the Win7 upgrade. Also - I'd double check the drivers page for your system for any Vista updates as well, best to do any driver/BIOS/Video BIOS updates prior to the Win7 upgrade process. I know that some of them were created before Windows 7 was out - and may not want to install if it sees the newer OS.
As to the fix - this could manifest itself in many ways - but essentially - this resolves system flakyness with USB devices attached . Some internal devices (card readers, touchscreens, some Wireless LAN interfaces) connect via USB - so they could be affected, even if you haven't hooked up anything to your system externally.
Not sure just what problems you were experiencing, so can't say this was the cause (and will be the fix) - but if it applies to your system - I'd definitely give it a shot. I checked a couple of systems that had this update - I see it now on the software drivers and update page for them, so it looks like it rolled out OK.
Happy Holidays...
-DM (an HP employee, but the time and comments here are my own, not my employers)
-DM (HP Retiree)
NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

HELP Adobe flash drive update BUG?? Big Problem

I bought a 13 inch MacBook Air in August 2014.
OS X Maverick, Version 10.9.4. 4 GB memory, 256GB storage.
I have been using Safari to see lecture videos from Echo360, and they have been working well despite the slow internet of the country.
Just until two days ago, everything had been working fine, until a Adobe Flash Driver Update popped up on my screen.
At first I ignored it (b/c I usually dont care about using the latest versions; the lecture videos had been working perfectly)
but it kept popping up so I clicked update.
The next day, my mac kept losing connection to internet every 1-3 minutes, such as "resolving host" messages.
The videos kept crashing and I had to re open the page, refreshing wouldnt work. about 15 times for a 50 minute video.
I erased the Flash Driver.plugin from my internet plug-ins in the library, and the internet came back alive.
I was guessing the "updated" plugins were eating up my internet/browser...
So then I downloaded chrome so I wouldnt have to manually use adobe anymore,
and now, the videos keep freezing at random moments at about 5-10 minute intervals. Now that the internet is back alive, i just have to refresh the page, which still takes forever to load...fortunately the browsers dont crash anymore...
Right then, I completely disposed anything related to adobe flash drive. I still have Adobe pdf which works great.
But even after, it kept freezing...
Maybe I was thinking this is normal when watching videos on chrome b/c the plug ins are not manually stored in my mac?
If not, what is causing the freezing of the videos on google chrome? (i dont think my mac is losing internet connection anymore every second like yesterday)
Is there any way to fix it? Is it from yesterday's history of downloading the "update"?
I just want to be able to watch my lecture videos like I normally did the past two weeks, before I downloaded the "update"
and now I am afraid that downloading adobe might crash my internet/browsers again.
It took me several hours to come to erasing the "updated" plug ins as I am fairly a noob in computers.
I spent a lot of time and researched a lot up till 5AM in the morning just last night.
and I have exams coming up next week... I would really want this to be resolved.
Should I try downloading adobe from its actual website and see what happens?
If yes, which versions would you recommend?
Yesterday when I checked after the update, it stated the most current Adobe 15.
If this contains bugs for mavericks, I would rather do older versions.
I do not know which version I was using before the "update" when everything worked perfectly.
Thanks for reading all this
I know I am all over the place; Im just very frustrated and desperate as not knowing what to do....
I just want my mac to work like before I clicked on the "update"
Any help will be greatly appreciated
Thank you

You probably installed some kind of malware pretending to be a Flash update. That's very common.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ +N.+ =//p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

HP Laserjet 1200 and Driver Updates

On the "Download Drivers and Software" support page for the HP Laserjet 1200 printer, there is an option, "Automatically check to see if your driver needs updating".
A machine that I am supporting is having a MS Word collating issue (sometimes works, sometimes doesn't) and I don't know if its a driver issue or not. The machine is XP SP3.
If I click on this link, obviously it will check the drivers, but:
1) Will it give me the option to automatically update the drivers if it finds they are outdated, and
2) How do I roll back to the old driver if the update introduces problems?
Since this potential driver update isn't going through the normal MS XP driver update routine in Device Manager, I'm leery that I won't be able to recover if something goes wrong.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Sol 10 driver update issues!

Similar Messages

Maybe you are looking for