Sol 9 x86 AMD installation
Hey all. I'm in a rut career wise and decided to get certified w/Solaris. I ordered the x86 version, and I'm running into problems already.
When using CD1 or the installation CD, I get the same following error:
config error - missing controller?
filesystem not mounted
configuration assistant exited prematurely
then it continues and asks me to choose which installation method i would like to use. when choosing the interactive, i get the following error message:
could not load drivers for
root filesystem could not be loaded
the root filesystem error is something along those lines, i didn't write it down. after that, it just tells me to press a key, and my system reboots. My system config is as follows:
AMD 1600 processor
ECS K7S5A mobo
512 PC2100 DDR RAM
3 IDE drives - 2 40gigs, 1 60gig (60gig is blank, trying to install Solaris here, it's the primary master)
Currently running a few operating systems (does that matter?)
i cannot figure out what to do from here. i've checked the docs on Suns site, and i can't find a fix. i find lots of stuff about patches, etc...but i can't patch a cd now can i. i hope someone can help, i've been at it all day and starting to get a little frustrated. =] thanks for your time.
This is probably the "pci function #5" problem for SIS chipsets.
Apparently you can work around the problem by creating a custom
DCA floppy diskette and installing/replacing a fixed ata.bef file on
that floppy:
http://groups.yahoo.com/group/solarisonintel/message/45595
http://groups.yahoo.com/group/solarisonintel/message/45366
Similar Messages
-
Sol x86 1/01, Cpq Array 4200 controller install
Does anyone know of a faq or how-to on installing Sol x86 1/01 onto a compaq server that uses a Smart Array controller 4200?
I have the 4200 conf'd for raid 5, with a 4g partition logical volume and the remainder as a second volume.
I have dowloaded the Compaq DU for 2nd gen. array controllers, and add that driver.
When trying to install Sol onto this box, I get "The Solaris system could not detect a primary disk. Realmode drivers are used to detect them....."
PS: The install goes fine without an array controller. But this system is going to host a MySQL database and I would like to have a hardware raid.I did try with ttyb menu item but no use. Same issue. I agree about 1 GB but Sun documentation clearly says that 512 MB is OK for this GUI installation. Earlier I did use Solaris 2006 on that same test machine but Solaris 2007 refused the install due to what you pointed out (it needs 768 MB min installed memory). Looks like Solaris 2008 have been tweaked back to fit within 512 MB requirement (that's what the Sun's documentation says).
But why this problem is happening. I feel so sad because I've disturbed the entire disk geometry to install the 2008 version on that test machine. Maybe it's bad Christmas time to me (coz OpenSuSE 11 too has gone haywire on that test machine as X died out and hung during post install auto configuration. So silly! Only Fedora Core 9 installed smoothly apart from the existing Windows XP SP2!). -
Link to download X86 Solaris Installation for weblogic 10.3
Can please anyone let me know the link to download X86 Solaris Installation for weblogic 10.3.
I am only able to see installables for X86 windows,X86 linus & sparc but nothing for X86 Solaris.Hi;
Can please anyone let me know the link to download X86 Solaris Installation for weblogic 10.3.I belive its not available. Please check :
WebLogic 10.3 availability?
Also check certification matrix:
http://www.oracle.com/technology/support/metalink/index.html
Regard
Helios -
Hi,
This may have been asked already but i searched the forums and couldnt see if it was or not.
Anyway i was looking to deploy Weblogic on a Solaris 10 box but it is not Sparc it is an AMD processor.
Can anyone tell me if there is such an installer? Or if there is a workaround for the Sparc installer.
Regards,
DiarmaidA similar question was asked in the below post,
Re: Weblogc 10.3 64 bit
But you can find what you are looking for at the following support page, there's what looks to be a basic/general installer:
http://e-docs.bea.com/platform/suppconfigs/configs/solaris/solaris10_103.html#102349
I'm trying to install 10.3 on Solaris 10 with an AMD64 now and I hit a Fatal Error when it tried to create the domain.
Hope that helps.
Edited by: user10882084 on Feb 18, 2009 8:19 AM -
Error - SAP SOL 4.0 Installation - SLES9 - MaxDB | Error Number JS-30151
Hi Guys,
i got an Error if I want to install the Solution Manager 4:
JS-30151 Java Process Server0 of Instance SM4/DVEBMGS01 [ABAP: Active, Java: (Dispatcher; RUNNING, server0: UNKNOWN)] did not start after 18:00 minutes. Giving up.
FC0-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|4|0|startJava was executed with status ERROR.
In other Topics i read that i maybe must increase the Max Heap.. but i dont know how I can do this..
I got SLES9 with MAXDB, IBM SDK 1.5 + runtime.. where can i change the heap?
I start the installation with "sapinst.sh" an the gui connect...
Thank you for helpHey Guys,
I have found an solution, which works for me at least, should be of help to you, too.
"Out of memory" issues are often associated with wrong settings (or lets say not right settings), in this case particularly it was the Heap size, which should be adjusted.
How you can do this (with the use of configtool) you can read in SAP NOTE 710146.
From thread - How to increase memory associated to was I have used Mikes advice -
Quote Mike:
"Hi Jianhong,
The root cause of OutOfMemory error can be different though uaually it can be solved by increasing J2EE Server
MX size. To increase MX size execute J2EE ControlTool, click on the instance and select your server(s). On the right frame you will see Java settings tab. you can adjust MX parameters as follows:
-Xms1024M
-Xmx1024M
-XX:MaxNewSize=192M
-XX:NewSize=192M
-XX:MaxPermSize=256M
-XX:PermSize=256M
Also set "Max Heap Size" to the same value (1024).
Then you'll need to restart you J2EE server to activate paramters. However if you have less then 2048 Mb of RAM,I would go with 512M settings fro teh MX/MS. Otherwise your system may go into swapping.
Regards,
Mike"
If you need additional information about settings and values you can also refer to SAP NOTE 723909.
Hope this helps.
Regs,
Ati -
Installer is being run as admin. Bonjour service is installed and running.
The lack of information is a bit frustrating... nothing in event viewer that I can see..For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Jrockit jre/jdk solaris x86 AMD 64
Is there a jrockit jdk/jre for x86 64 bit ?. Is there a beta version available.
No, that is currently not available. But we have noted your interest.
Thanks,
/Staffan -
Hi Does any body if there is a version of oracle 9i
that can be installed in Solaris 9 for Intel.
If so where to get it? link??
Regards
Sudhakar JThe newest version for Solaris Intel is 8.1.7. As far as I now this version is the last on this platform/OS.
-
When installing the PowerDesigner client we receive the message below that a Microsoft Visual C++ package is required. When we select INSTALL, the operation fails due to a higher version already being present on the machine. We continue with the installation and we do not encounter further errors. Can this C++ Redistributable install failure safely be ignored? (We would prefer not to remove a higher version of the Redistributable in order to install an earlier version for PowerDesigner.)
"Sybase PowerDesigner 16.5 requires the following items to be installed on your computer. Click Install to begin installing these requirements."
Status Requirement
Pending Microsoft Visual C++ 2010 Redistributable Package (x86)
"The installation of Microsoft Visual C++ 2010 Redistributable Package (x86) appears to have failed. Do you want to continue the installation?"
Viewing the Microsoft install log:
Installation Blockers:
"A newer version of Microsoft Visual C++ 2010 Redistributable has been detected on the machine."You should be fine. The redistributable should not update a newer installation.
Which version of PD were you installing?
Chris -
downloaded installed sol x86 1/06
then downloaded and installed latest recommended patch cluster
not many of the patch cluster loaded correctly
a typical error is as follows
++++++++++++++++++++++++++++++++++++++++++++++++++++
# cd /var/sadm/patch/118344-11
# more log
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
/export/home/hfxnss/10_x86_Recommended/118344-11/SUNWarc/install/checkinstall: /
export/home/hfxnss/10_x86_Recommended/118344-11/SUNWarc/install/checkinstall: ca
nnot open
pkgadd: ERROR: checkinstall script did not complete successfully
Dryrun complete.
No changes were made to the system.
+++++++++++++++++++++++++++++++++++++++++++++++++++
yet a showrev -p displays an earlier version of the patch ?
any suggestions as to why so many of the recommend cluster did not load
Ran patch cluster in single user mode as root
...... any pointers appreciated .....thks ...... andy/export/home/hfxnss/10_x86_Recommended/118344-11/SUNWa
rc/install/checkinstall: /
export/home/hfxnss/10_x86_Recommended/118344-11/SUNWar
c/install/checkinstall: ca
nnot open
pkgadd: ERROR: checkinstall script did not complete
successfullySolaris 2 FAQ:
http://www.science.uva.nl/pub/solaris/solaris2.html#q5.59
5.59) Patch installation often fails with "checkinstall" errors.
Try putting the patches in /tmp.
Darren -
Windows 8 Consumer Preview: AMD Switchable Graphics - Unswitchable
Hello everyone,
I have a HP Pavillion dv6-6004tx notebook computer, and I recently upgraded it to the Windows 8 Consumer Preview (Build 8250). I would like some troubleshooting from those who have/are experiencing this and may have found a way around it.
As far as the specs of my computer goes:
Intel Core i7-2720QM
6 GB DDR3 RAM
64-Bit OS
AMD Radeon HD 6700M
Intel Graphics Family
The problem lies within my display drivers. Some of you may also have a Switchable Graphics feature installed in your computers. But for those who don't, basically what it is is a feature that allows one to switch their display adaptor from a Power-Saving GPU to a High-Performance GPU, and vice versa.
In my case, as you can see above, the High-Performance GPU is the Radeon 6700M, while the Power-saving GPU is the integrated Intel one. My problem deals with not being able to switch back and forth between them, like I was able to back on Windows 7. As this is a feature of AMD Catalyst Control Center, I have searched their website and they actually have a supported driver version for Windows 8 CP, albeit it still being a beta and sometimes glitchy.
http://support.amd.com/us/kbarticles/Pages/Windows8ConsumerPreviewDrivers.aspx
(As you can see, my model: AMD Radeon HD 6000M Series is listed)
After installing the Control Center, I restarted and a pop-up notifcation tells me that:
"The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter. Please update your AMD graphics driver, or enable your AMD adapter using the Displays Manager."
I found this odd at first, as my model clearly was listed. But after some inferencing, I realized that my computer must be running on the integrated Intel graphics by default. This was further reinforced when I tried playing some games and other applications (It would be slightly choppy - as experienced before when I had forgotten to switch back onto High-Performance GPU).
The AMD Radeon card used to have an error (The device won't start. Code: 10) under device manager, but with a fresh install of the driver obtained from AMD, it seems to be working fine. However, my computer is still using the Intel card by default, and I have no way of switching to the other GPU as Catalyst will not start.
Has anyone found a way around this?
This question was solved.
View Solution.I'll give you a two way to make it work!!!! There is so much incompatibilities with the FIRST METHOD listed, you won't get use a Intel (less power consuming card) GPU to work after the changes! you've got to wait till HP let's it work properly or deal with power hungry AMD GPU even in battery mode .
THE SECOND METHOD listed works without any problem with compatibility in any apps BUT IT IS Require pace and order ( may be exhaustive for newbie's, no worries listed below got all the info you need to make it work)
SO the first option:
NOTE:THIS WILL TRIGER THE OUTCONTROL EVENTS SO PRECAUTION METHODS I WILL ADVISE FURTHER AS WE GO STEP BY STEP _ DOWNLOAD CHROME IF YOU RUNNING INTERNET EXPLORER ( GRAPHIC CARD WILL WORK WITH GAMES BUT NOT WITH METRO APPS THEY WILL NOT CRASH JUST NOT LAUNCH
ALL THE METHODS BELOW TESTED BY MYSELF AND GET WORKED YET MANY INCOMPATIBILIES STILL WILL REMAIN USE IT ON YOUR OWN RISK!
as i can tell all the games working properly yet battlefield 3 won't launch
1. AT first make sure that windows UPDATE IS SWITCH OFF or let you choose to download and instal (not automaticly or it will update ur device (at device manager) without ur permision and all eforts are gone!
2.uninstall AMD Catalyst from "program and components" at control panel, then uninstal all the devices Intel and AMD at device manager at the control panel (check unistal driver at intel HD driver)
3.reboot! after reboot download this http://www2.ati.com/drivers/hotfix/win8/amd_catalyst_win8_consumer_preview_[rc10].exe
and this
ftp://ftp.hp.com/pub/softpaq/sp53001-53500/sp53025.exe - 300mb
4. instal sp53025.exe at windows 7 compatibility mode (it'll unpack by default in C:/SWsetup)
then start the istalation make sure u choose a "custom" , THIS IS CRUCIAL - uncheck the CATALYST (check all the rest intell driver amd driver ect.) after the instalation do not reboot
5. Next start the instalation of the windows 8 consumer preview driver from AMD.
uncheck all the rest ( after the sp53025 there will be only AMD driver (check/uncheck) and the catalyst (check/uncheck) box available) uncheck the AMD driver and install only the CATALYST driver!!!!
Reboot! Enjoy !!! There will be no CATALYST(only the intel preference and settings where the CATALYST should've be) at the right mouse click but switchable graphic is now awailable LIKE THIS
Unfortunately you'll won't be available to choose between the INTEL and AMD ! AMD is now working by default
All the .exe will now recognize 6770m
AND METRO APPS WON"T WORK!!!!!!! AS internet explorer will crash as you'll open it
SECOND METHOD IF THE FIRST FAILS (WHICH IS IMPOSSIBLE IF HANDS ARE STRAIGHT MORE OR LESS)
FURTHER IS TESTED!
THIS METHOD EXCLUDE THE METRO APPS CRASH AND ALL THE REST INCOMPATIBILITIES WITH EVERY EXECUTABLE PROGRAMS AND GAMES!!!!
Note: Requires knowledge to sign your own drivers, disable signing enforcement at boot and modding some inf files.
I am not responsible for any damage that may arise. This guide is not exhaustive.
Requirements:
.NET Framework 3.5 -- Can be enabled within Windows 8, in "Turn Windows features on or off"
Windows Driver Kit (WDK) -- Can be downloaded from here
Configure Windows Update to only "Download updates but let me choose wether to install them", and hide both Intel and AMD updates. This is to prevent our driver be updated by Windows.
1.Download the latest switchable graphics drivers from this site: leshcat blog IT Tips & Tricks: Catalyst 12.3 Pre-WHQL UnifL for Switchable Graphics
2. Run the installer that will extract the contents of the file, by default it will ask you to disable "Signing enforcement of Windows", you will know that it is working after rebooting because a "Test Mode" watermark is added to the desktop, above "Windows 8 Consumer Preview".
3. At this moment, do not run the AMD installer yet. We need to modify some files. By default, the driver will be extracted to "C:\Drivers\Catalyst 12.3 Pre-WHQL UnifL".
4. Go to this directory, and open the following file "Packages\Drivers\Display\W76A_INF\C7133662.inf"
Do the following changes:
In the section [Version] add:
Code:
[Version]
CatalogFile=C7133662.CAT
There is a section that has the listing of all the supported cards. Rename it from "[ATI.Mfg.NTamd64.6.1]" to "[ATI.Mfg.NTamd64.6.2]"
It should look like this:
Code:
[Manufacturer]
%ATI% = ATI.Mfg, NTamd64.6.1, NTamd64.6.2
[ATI.Mfg.NTamd64.6.2]
"%AMD68F2.1%" = ati2mtag_VancouverC_PXAI, PCI\VEN_1002&DEV_68F2
"%AMD9519.1%" = ati2mtag_VancouverC_PXAI, PCI\VEN_1002&DEV_9519
5. Follow this guide to Test-Sign a Driver Package. (This guide is generic)
6. After the previous step, you should have a Catalog file and the inf file we modified previously.
7. Now proceed to run the AMD installer in "Win 7" Compatibility Mode. It is most likely that the driver install will fail at this stage, but the rest of Catalyst software will be installed.
8. Now install the driver using the "Have disk" method in device manager and your modified INF for both Intel and AMD cards.
9.If you did the test-signing process correctly, the installation will succeed for both cards.
10. Reboot and enjoy your switchable graphics under Win 8.
I still have to figure out how to make brightness controls to work.
BTW sorry for any grammar mistake, I am not a native English speaker.
Known issues:
- Sometimes switching may not work, resulting in BSOD.
- When AMD gpu is active, Intel driver context menu options are still available.
Features:
AMD gpu can be turned off, so battery will last longer. -
I am installing SQL Server 2012 Developer (from ISO image written on DVD), my machine has Windows 7 (Edit: Windows 7 with service pack 1) on it. This machine already has SQL Express and SQL 2008 R2 Express installed in it.
On running 2012 setup it goes fine from Setup Support Rules to Installation Progress. In Installation Progress after some progress installation fails.
Windows show the following components couldn't installed:
Managment Tools Complete Failed. Client Tools Connectivity Failed. Client Tools SDK Failed. Client Tools Backwards Compantibility Failed. Managment Tools Basic Failed. SQL Server Data Tools Failed. Reporting Services -Native Failed. Database Engine
Services Failed. Data Quality Services Failed. full-Text and Semantic Extractins for Search Failed. SQL Server Replication Failed. Integration Services Failed. Analysis Services Failed. SQL Client Connectivity SDK Failed.
In detail for failure of every component it provide these details:
Action required:
Use the following information to resolve the error, and then try the setup process again.
Feature failure reason:
An error occurred for a dependency of the feature causing the setup process for the feature to fail.
In summary log file it provide the following details:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068643839
Start time: 2012-07-31 16:23:37
End time: 2012-07-31 16:33:32
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for Conn: Use the following information to resolve the error, and then try the setup process again.
Next step for SDK: Use the following information to resolve the error, and then try the setup process again.
Next step for BC: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for BIDS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for DQ: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Next step for IS: Use the following information to resolve the error, and then try the setup process again.
Next step for AS: Use the following information to resolve the error, and then try the setup process again.
Next step for SNAC_SDK: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: Haansi-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2005 SQLEXPRESS MSSQL.1
Database Engine Services 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SQL Server Replication 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SharedTools 1033
Express Edition 9.4.5000 No
SQL Server 2005
Tools 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient\Connectivity 1033 Express Edition
9.4.5000 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 Database Engine Services 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 SQL Server Replication 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1617.0 No
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2318.0 No
SQL Server 2012
Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SS2012
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSOLAP$SS2012
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Manual
ASSYSADMINACCOUNTS: PC\Haansi
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, BIDS, CONN, IS, BC, SDK, SSMS, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SS2012
FTSVCPASSWORD: <empty>
HELP: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SS2012
INSTANCENAME: SS2012
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SS2012
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Manual
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SS2012
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Haansi-PC\Haansi
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools SDK
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Data Tools
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Client Connectivity SDK
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\SystemConfigurationCheck_Report.htmPlease help.
I did what you suggested, but, still got error message to install SQL server data tools: Here is the log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068037632
Start time: 2014-09-29 15:05:38
End time: 2014-09-29 15:15:55
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SSDTBI_VS2012: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: MSBI
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2008 Management Tools - Basic
1033 Express Edition 10.0.1600.22 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Basic
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Complete
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools SDK
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 SQL Server Data Tools
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Integration Services
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\9f7a58aa5d6d76ffe6be968a4ad339f5\x86\setup\
Installation edition: Express
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x86
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x86
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SSDTBI_VS2012, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\ConfigurationFile.ini
Detailed results:
Feature: SQL Server Data Tools - Business Intelligence for Visual Studio 2012
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio Tools for Applications 2012
Component error code: 0x80044000
Component log file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\VSTA2012_LangsSupport_Cpu32_1.log
Error description: VS Shell 2012 installation has failed with exit code -2147205120.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3436.0&EvtType=VSTA2012_LangsSupport%40Install%400x-2147205120
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\SystemConfigurationCheck_Report.htm -
Installation issue : sql server 2008 r2 some services failed to installed on windows 7
I have been facing this problem while installing sql server 2008 r2.. i tried so many times but same result .. it shows sql server installed with some errors
database engine service : failed
SQL Server Replication : failed
Full-Text Search : failed
Analysis Services : failed
Reporting Services : failed
And my Log file (or) summary file is (it is in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log):
Overall summary:
Final result: User cancelled
Exit code (Decimal): -2068380094
Exit facility code: 1207
Exit error code: 1602
Exit message: User has cancelled.
Start time: 2014-08-14 21:15:26
End time: 2014-08-14 21:23:58
Requested action: AddNode
Machine Properties:
Machine name: MANJU-PC
Machine processor count: 4
OS version: Windows Vista
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Database Engine Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER SQL Server Replication
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Full-Text Search
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSAS10.MSSQLSERVER Analysis Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSRS10.MSSQLSERVER Reporting Services
1033 10.0.1600.22
No
Sql Server 2008
Management Tools - Basic 1033 Developer Edition
10.0.1600.22 No
Sql Server 2008
Management Tools - Complete 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility 1033 Developer Edition 10.0.1600.22 No
Sql Server 2008
Client Tools SDK 1033
Developer Edition 10.0.1600.22 No
Sql Server 2008
Integration Services 1033 Developer Edition
10.0.1600.22 No
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: D:\Softwares\JAVA & .NET SW\SQL Server 2008\SQL Server 2008\x86\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: AddNode
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: *****
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
CONFIGURATIONFILE:
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERNETWORKNAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTANCENAME: <empty>
MEDIASOURCE: D:\Softwares\JAVA & .NET SW\SQL Server 2008\SQL Server 2008\
PID: *****
QUIET: False
QUIETSIMPLE: False
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: *****
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140814_210558\ConfigurationFile.ini
Detailed results:
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140814_210558\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CancelException
Message:
User has cancelled.
Stack:
at Microsoft.SqlServer.Configuration.UIExtension.Request.Wait()
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.SubmitAndWait(Request request)
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.NavigateToWaypoint(String moniker)
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceService.Waypoint(String moniker)
at Microsoft.SqlServer.Configuration.UIExtension.WaypointAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)Requested action: AddNode
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Database Engine Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER SQL Server Replication
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Full-Text Search
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSAS10.MSSQLSERVER Analysis Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSRS10.MSSQLSERVER Reporting Services
1033 10.0.1600.22
No
Sql Server 2008
Management Tools - Basic 1033 Developer Edition
10.0.1600.22 No
Sql Server 2008
Management Tools - Complete 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility 1033 Developer Edition 10.0.1600.22 No
Sql Server 2008
Client Tools SDK 1033
Developer Edition 10.0.1600.22 No
Sql Server 2008
Integration Services 1033 Developer Edition
10.0.1600.22 No
Instead of installing SQL server instance you selected add node which is to be selected when SQL server installation is to be made on Node which is being added to cluster. Since your OS is not clustered I am sure you selected worng option.
Please right click on setup file and select run as administrator. Now installation window which pops up on that on left hand side select
installation and then on page that appears select 'New server standalone installation or add feature to existing installation'.
You already have SQL server 2008 installed on your machine as per feature discovery report
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Oracle Enterprise Manager Agent deployment (Installation and Configuration) Error
Hello,
I am trying to create an agent on a linux server using Oracle Enterprise Manager 12.1.0.3. The user is created with root privilege on the server, by change /etc/sudoers entry username the same as the root entry. After that I tried to add host target by clicking Setup->Add Target->Add target Manually->Add Host Targets in the Oracle Enterprise Manager.
In the Add Target view: I clicked on add, then I entry host and platform information. After that I click next. Then I provided the Linux x86-64 : Installation Details for
Installation Base Directory, Instance Directory, Name Credential ... then click next. then click Deploy Agent.
In the Add Host Status view: stages Initialization and Remote Prerequisite Check successfully passed, but in the stage Agent Deployment, it failed in the Installation and Configuration phrase of the Agent Deployment stage.
The log content is shown below. There are numerous SEVERE Errors. But I don't have much experience in dealing with these type of problems. I thank you in advance for all the helps.
lf
WARNING: Validation of XML schema is disabled because AggregateDescriptions.xsd could not be found
INFO: Creating new CFM connection
INFO: Creating a new logger for oracle.sysman.top.agent
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.12_1_0_3_0.xml
INFO: Creating a new logger for OuiConfigVariables
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/OuiConfigVariables.1_0_0_0_0.xml
INFO: Aggregate Description oracle.sysman.top.agent:12.1.0.3.0:common successfully loaded
INFO: Aggregate Description OuiConfigVariables:1.0.0.0.0:common successfully loaded
INFO: Successfully returning from CfmFactory.connect()
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: oracle.sysman.top.agent:IAction.perform() was called on {Action state:configuration in CfmAggregateInstance: oracle.sysman.top.agent:12.1.0.3.0:common:family=CFM:oh=/users/ncgf/em_agent/core/12.1.0.3.0:label=1}
INFO: Framework waiting for Action to complete at 15:08:10.272
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=0 stepIndex=0 microStep=0
WARNING: Skipping environment variable line: "}": oracle.sysman.emCfg.common.CfwException: A non-empty environment line must contain "=": }
WARNING: Failed to read environment variable file /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties: java.io.FileNotFoundException: /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties (No such file or directory)
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.agent.config.AgentConfiguration
INFO: oracle.sysman.top.agent:Classpath = /users/ncgf/em_agent/core/12.1.0.3.0/oui/jlib/srvm.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/agentConfig.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/emConfigInstall.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/emagentSDK.jar:/users/ncgf/em_agent/core/12.1.0.3.0/modules/oracle.http_client_11.1.1.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/log4j-core.jar
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration has been started
INFO: oracle.sysman.top.agent:Parametes passed to agent configuration are:
1.ORACLE_HOME=/users/ncgf/em_agent/core/12.1.0.3.0
2.AGENT_PORT=3872
3.ORACLE_HOSTNAME=nsn175-89.us.oracle.com
4.b_doDiscovery=false
5.AGENT_BASE_DIR=/users/ncgf/em_agent
6.AGENT_INSTANCE_HOME=/users/ncgf/em_agent/agent_inst
7.s_hostname=nsn175-89.us.oracle.com
8.OMS_HOST=nsn175-105.us.oracle.com
9.b_startAgent=false
10.b_secureAgent=true
11.b_chainedInstall=false
12.b_forceConfigure=false
13.EM_UPLOAD_PORT=4904
14.b_forceAgentDefaultPort=false
15.s_staticPorts=
16.PROPERTIES_FILE=
b_skipValidation=false
INFO: oracle.sysman.top.agent:Validating OMS_HOST and EM_UPLOAD_PORT
INFO: oracle.sysman.top.agent:Validating with http protocol ...
INFO: oracle.sysman.top.agent:URL framed is:http://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:Connection refusedUnexpected end of file from server
INFO: oracle.sysman.top.agent:Validating with https protocol ...
INFO: oracle.sysman.top.agent:URL framed is:https://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:The EM_UPLOAD_PORT passed is a secure port. Hence AGENT_REGISTRATION_PASSWORD or s_encrSecurePwd should be passed
INFO: oracle.sysman.top.agent:EM Protocol Switch determined: https
INFO: oracle.sysman.top.agent:Performing free port detection..
INFO: oracle.sysman.top.agent:Trying for host : nsn175-89/10.134.175.89 and port : 3872
INFO: oracle.sysman.top.agent: Trying for host : /127.0.0.1 and port : 3872
INFO: oracle.sysman.top.agent:** Agent Port Check completed successfully.**
INFO: oracle.sysman.top.agent:Agent Port from User Passed Port3872
INFO: oracle.sysman.top.agent:Paths after canonical format conversions are :
1. state_dir=/users/ncgf/em_agent/agent_inst
2. agentBaseDir=/users/ncgf/em_agent
3. oraHome=/users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Parent directory of agent instance home:/users/ncgf/em_agent
INFO: oracle.sysman.top.agent:AgentConfiguration:perform:AgentPortHandler for /users/ncgf/em_agent/core/12.1.0.3.0 and hosts=nsn175-89.us.oracle.com returned Port to Use=3872
INFO: oracle.sysman.top.agent:Instantiating emctl.template file #DEFAULT_EMSTATE# with /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Writing the following contents into /users/ncgf/em_agent/core/12.1.0.3.0/install/oragchomelist
INFO: oracle.sysman.top.agent:/users/ncgf/em_agent/core/12.1.0.3.0:/users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Both /etc/oragchomelist and /var/opt/oracle/oragchomelist does not exist.
INFO: oracle.sysman.top.agent:Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:AgentConfiguration: Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:Executing the command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com
INFO: oracle.sysman.top.agent:Creating shared install...
INFO: oracle.sysman.top.agent:Source location: /users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Destination (shared install) : /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Secure Mode: No
INFO: oracle.sysman.top.agent:DeployMode : agent
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:Creating directories...
INFO: oracle.sysman.top.agent:Creating private.properties...
INFO: oracle.sysman.top.agent:Creating blackouts.xml...
INFO: oracle.sysman.top.agent:Creating targets.xml...
INFO: oracle.sysman.top.agent:Creating emctl control program...
INFO: oracle.sysman.top.agent:Creating emtgtctl control program...
INFO: oracle.sysman.top.agent:Agent will not be secured.
INFO: oracle.sysman.top.agent:Secure REPOSITORY_URL found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Secure emdWalletSrcUrl found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Property 'agentTZRegion' is missing from /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties. Updating it...
INFO: oracle.sysman.top.agent:An agentTZregion of 'US/Pacific' is installed in /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties.
INFO: oracle.sysman.top.agent:The command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com completed with status=0
SEVERE: oracle.sysman.top.agent:Securing of agent step will be skipped because of the following reasons:
1. Agent Registration Password was not passed.
2. b_secureAgent was passed as false
3. The flag -forceConfigure was assed from agentDeploy.sh
INFO: oracle.sysman.top.agent:Plugin File:/users/ncgf/em_agent/plugins.txt
INFO: oracle.sysman.top.agent:Plugin Homes found.
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/core/12.1.0.3.0/perl/bin/perl /users/ncgf/em_agent/core/12.1.0.3.0/bin/AgentPluginDeploy.pl -oracleHome /users/ncgf/em_agent/core/12.1.0.3.0 -agentDir /users/ncgf/em_agent -pluginIdsInfoFile /users/ncgf/em_agent/plugins.txt -action configure -emStateDir /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:The Agent emStateDir location passed is /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent: The log file is /users/ncgf/em_agent/agent_inst/install/logs/agentplugindeploy_2013_10_16_15_08_11.log
INFO: oracle.sysman.top.agent: The temp file created to check R/W permissions in Oraclehome: /users/ncgf/em_agent/core/12.1.0.3.0 is /users/ncgf/em_agent/core/12.1.0.3.0/rwFile
INFO: oracle.sysman.top.agent:Plugin command completed with status=0
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/agent_inst/bin/emctl listplugins agent -type all
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
SEVERE: oracle.sysman.top.agent:ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log /users/ncgf/em_agent/agent_inst/install/logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
SEVERE: oracle.sysman.top.agent:Agent configuration has failed
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: done waiting for Action from 15:08:10.272
Thank you for your help AkankshaSheoranKaler. I have executed the following command based on your request. If there is any issue, please let me know. Thanks!
"Can you run this command to make sure that the agents bits were downloaded correctly : oms home /bin /emcli verify_updates
Share the output of the command. I am suspecting this is a know issue (Bug 17300008) but i will wait for your output. Also if you can open an SR with oracle support to track this issue and its resolution. "
[ncgf@nsn175-105 bin]$ ./emcli setup -url=https://nsn175-105.us.oracle.com:7803/em -u sername=SYSMAN
Oracle Enterprise Manager 12c 3.
Copyright (c) 1996, 2013 Oracle Corporation and/or its affiliates. All rights reserve d.
The configuration directory "/users/ncgf" may not be local. See the "dir" option in t he help for the setup command.
Do you want to continue using this directory? [yes/no] yes
Enter password
Emcli setup successful
[ncgf@nsn175-105 bin]$ ./emcli verify_updates
Verifying updates. Starting validation...
Type : Plug-in
Description: Demo Hostsample Test Plugin
Attributes
Version: 1201000100
Revision: 0
OS Platform: Generic Platform
Plug-in Name: Demo Host Sample Plugin
Archives are missing from the Software Library. Unable to determine the URL for downloading the update. The update might not have come from Oracle Enterprise Manager Store.
For each update with missing archives, emcli import_update can be used with a -force option to re-upload the archives to the Software Library.Hello AkankshaSheoranKaler
We have done the following, but we aren't able to resolve this issue. Thank you for your help!
lf
“This happen if the software library is not accessible, readable or unmounted (if it is in shared file system).”
On Enterprise Manager server [nsn175-105], we did the following:
1. we modified /etc/exports to include this line: /export *(rw,no_root_squash,sync)
we start nfs service by executing command “service nfs start”.
On Management Agent server (nsn175-89), we verified that we are able to mount /export directory of EM server.
On Management Agent server, we started firefox browser and were able to run successfully https://nsn175-105.us.oracle.com:4904/empbs/genwallet
After making this change, we ran agent deployment again. We encountered the same error as shown above.
“You can fix the software library or you can download the agent bits in offline mode.”
For fixing the software library, select Setup->Provision and Patching->Offline Patching, then select Offline Patching radio button, download: https://updates.oracle.com/download/em_catalog.zip. Next upload this zip file.
“Try downloading the bits again”
We are not sure what agent bits are. Would you please explain this and provide procedure how we can download this?
(Here I have attempted to fix the software library, but I am new to Enterprise Manager and not sure how to interpret this). -
SQL Server Express intermittent installation issue
Have been seeing this error for several months trying to duplicate and troubleshoot. SQL Server 2008 R2 SP2 Express being installed on Windows 7 (x86 or x64) Professional, various processors, various execution environments (VM and non-VM). Yesterday duplicated
on x86 Win7 Pro VM clean install (installed Win7 Pro, loaded all updates except .NET 4.5, and installed my application). App installer copies .NET 4, Visual Studio 2010 C++ run-time, and then SQL Server 2008 R2 SP2. Below is portion of detail.txt from
setup failure log:
2014-07-12 18:22:17 Slp: ----------------------------------------------------------------------
2014-07-12 18:22:17 Slp: Running Action: SqlEngineDBStartConfigAction_install_configrc_Cpu32
2014-07-12 18:22:17 Slp: Action Data:
2014-07-12 18:22:17 Slp: Feature = SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu32
2014-07-12 18:22:17 Slp: Scenario = install
2014-07-12 18:22:17 Slp: Timing = ConfigRC
2014-07-12 18:22:17 Slp: ConfigObjectType = Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig
2014-07-12 18:22:17 Slp: FeatureName = SQL_Engine_Core_Inst
2014-07-12 18:22:17 Slp: FeatureCpuType = Cpu32
2014-07-12 18:22:17 Slp: FeaturePackageId = sql_engine_core_inst
2014-07-12 18:22:17 Slp: SlipstreamInstall = 1
2014-07-12 18:22:17 SQLEngine: --SqlEngineDBStartConfig: Install: SqlEngineDBStartConfig Configuration
2014-07-12 18:22:17 SQLEngine: : Action Scenario: Install, Feature Scenario: Install, Resolved Scenario Install
2014-07-12 18:22:17 Slp: Sco: Attempting to get network service account name
2014-07-12 18:22:17 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2014-07-12 18:22:17 Slp: Sco: Attempting to get account from sid S-1-5-20
2014-07-12 18:22:17 Slp: Sco: Attempting to get network service account name
2014-07-12 18:22:17 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2014-07-12 18:22:17 Slp: Sco: Attempting to get account from sid S-1-5-20
2014-07-12 18:22:17 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2014-07-12 18:22:17 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2014-07-12 18:22:17 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.ActiveNode =
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.IsActiveNodeUpgraded = False
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.Version =
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.IsDefaultInstance = False
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.InstanceId = MSSQL10_50.SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.ReferenceInstanceId = MSSQL10_50.SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.InstanceName = SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.SqlServerServiceName = MSSQL$SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --ProductProperties: Retrieving product properties from local node.
2014-07-12 18:22:17 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-07-12 18:22:17 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 Slp: Sco: Attempting to get registry value ProductCode
2014-07-12 18:22:17 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-07-12 18:22:17 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 Slp: Sco: Attempting to get registry value Language
2014-07-12 18:22:17 SQLEngine: --GroupProperties: Loading group properties from local machine.
2014-07-12 18:22:17 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-07-12 18:22:17 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 Slp: Sco: Attempting to get registry value SQLGroup
2014-07-12 18:22:17 Slp: Sco: Attempting to get account from sid S-1-5-21-3076291671-3154185214-3698330068-1005
2014-07-12 18:22:17 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-07-12 18:22:17 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 Slp: Sco: Attempting to get registry value SQLPath
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: Dumping Effective Properties for new instance.
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: InstanceId = MSSQL10_50.SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: InstanceName = SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: IsDefaultInstance = False
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: SqlServerServiceName = MSSQL$SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: IsExpressSku = True
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: IsWorkgroupSku = False
2014-07-12 18:22:17 SQLEngine: --InstallProperties: Dumping Install Properties
2014-07-12 18:22:17 SQLEngine: --InstallProperties: EnableRanu = True
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SecurityMode =
2014-07-12 18:22:17 SQLEngine: --InstallProperties: LoginMode = 1
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SqlCollation = SQL_Latin1_General_CP1_CI_AS
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SqlAdminAcounts =
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SqlServiceStartupType = Automatic
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SqlAccount = NT AUTHORITY\NETWORK SERVICE
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SqlDomainGroup =
2014-07-12 18:22:17 SQLEngine: --InstallProperties: AddCurrentUserAsSQLAdmin = True
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: Dumping Registry Properties
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: SqlServiceRelativeRegPath = System\CurrentControlSet\Services\MSSQL$SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: CompleteInstanceRegPathByName = SOFTWARE\Microsoft\Microsoft SQL Server\SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: CompleteInstanceRegPathById = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: ReferenceInstanceRegPathById = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: MSSQLServerInstanceRegPath = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQLServer
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: ReferenceMSSQLServerInstanceRegPath = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQLServer
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: SetupInstanceRegPath = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: ReferenceSetupInstanceRegPath = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 SQLEngine: --ProductProperties: Dumping Product Properties
2014-07-12 18:22:17 SQLEngine: --ProductProperties: ProductCode = b5153233-9aee-4cd4-9d2c-4faac870dbe2
2014-07-12 18:22:17 SQLEngine: --ProductProperties: LCID = 1033
2014-07-12 18:22:17 SQLEngine: --GroupProperties: Dumping Group Properties
2014-07-12 18:22:17 SQLEngine: --GroupProperties: SqlEngineGroupSid = S-1-5-21-3076291671-3154185214-3698330068-1005
2014-07-12 18:22:17 SQLEngine: --GroupProperties: SqlEngineGroupNameFromSid = WIN-EAD5VG4PBDE\SQLServerMSSQLUser$WIN-EAD5VG4PBDE$SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --GroupProperties: SqlEngineGroupNameFromSidNoDomain = SQLServerMSSQLUser$WIN-EAD5VG4PBDE$SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: Dumping Directory Propreties
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: DataRootDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: SystemDataDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: InstallSqlInstanceDir = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: DefaultDataDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: DefaultLogDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: BackupDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Backup
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: TempDbDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: TempDbLogDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: ErrorLogDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: TemplateDataDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Template Data
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: SqlInstanceBinnDir = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Binn
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: SqlInstanceTemplatesDir = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Binn\Templates
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: MasterDbPath =
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: MasterLogPath =
2014-07-12 18:22:17 SQLEngine: --SqlEngineDBStartConfig: ConfigRC : SqlEngineDBStartConfig Configuration
2014-07-12 18:22:18 Slp: Sco: Attempting to set directory full path
2014-07-12 18:22:18 Slp: Sco: Attempting to normalize directory path c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:18 Slp: Sco: Attempting to set directory full path
2014-07-12 18:22:18 Slp: Sco: Attempting to normalize directory path c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:18 Slp: Sco: Attempting to set directory full path
2014-07-12 18:22:18 Slp: Sco: Attempting to normalize directory path c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:18 SQLEngine: --SqlServerStartup: SQLEngine: Slipstream case: Enable traceflag -T902
2014-07-12 18:22:18 SQLEngine: : Checking Engine checkpoint 'StartEngineService'
2014-07-12 18:22:18 SQLEngine: --SqlServerServiceSCM: Starting SQL via SCM (-mSqlSetup -f -Q -qSQL_Latin1_General_CP1_CI_AS -T4022 -T4010 -T3659 -T3610 -T902 -dc:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Template Data\master.mdf -lc:\Program
Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Template Data\mastlog.ldf)...
2014-07-12 18:22:18 Slp: Sco: Attempting to start service MSSQL$SQLEXPRESS
2014-07-12 18:22:20 Slp: Sco: Service MSSQL$SQLEXPRESS started
2014-07-12 18:22:20 Slp: Sco: Attempting to get service process id for service MSSQL$SQLEXPRESS
2014-07-12 18:22:20 Slp: Invoking QueryServiceStatusEx Win32 API
2014-07-12 18:22:20 Slp: Sco: Returning service process id 3480
2014-07-12 18:22:20 SQLEngine: : Checking Engine checkpoint 'GetSqlServerProcessHandle'
2014-07-12 18:22:22 SQLEngine: --SqlServerServiceSCM: Waiting for nt event 'Global\sqlserverRecComplete$SQLEXPRESS' to be created
2014-07-12 18:22:24 SQLEngine: --SqlServerServiceSCM: Waiting for nt event 'Global\sqlserverRecComplete$SQLEXPRESS' or sql process handle to be signaled
2014-07-12 18:22:24 SQLEngine: : Checking Engine checkpoint 'WaitSqlServerStartEvents'
2014-07-12 18:22:59 Slp: Sco: Attempting to initialize script
2014-07-12 18:23:01 Slp: Sco: Attempting to initialize default connection string
2014-07-12 18:23:03 Slp: Sco: Attempting to set script connection protocol to NotSpecified
2014-07-12 18:23:03 Slp: Sco: Attempting to set script connection protocol to NamedPipes
2014-07-12 18:23:03 SQLEngine: --SqlDatabaseServiceConfig: Connection String: Data Source=\\.\pipe\SQLLocal\SQLEXPRESS;Initial Catalog=master;Integrated Security=True;Pooling=False;Network Library=dbnmpntw;Application Name=SqlSetup
2014-07-12 18:23:03 SQLEngine: : Checking Engine checkpoint 'ServiceConfigConnect'
2014-07-12 18:23:03 SQLEngine: --SqlDatabaseServiceConfig: Connecting to SQL....
2014-07-12 18:23:03 Slp: Sco: Attempting to connect script
2014-07-12 18:23:04 Slp: Connection string: Data Source=\\.\pipe\SQLLocal\SQLEXPRESS;Initial Catalog=master;Integrated Security=True;Pooling=False;Network Library=dbnmpntw;Application Name=SqlSetup
2014-07-12 18:24:16 Slp: Sco: Connection error code from SqlException is : -2
2014-07-12 18:24:30 Slp: Watson Bucket 1
Original Parameter Values
2014-07-12 18:24:30 Slp: Parameter 0 : SQL Server 2008
R2@RTM@
2014-07-12 18:24:30 Slp: Parameter 2 : System.Data.SqlClient.SqlInternalConnection.OnError
2014-07-12 18:24:30 Slp: Parameter 3 :
Microsoft.SqlServer.Configuration.Sco.ScoException@1211@1
2014-07-12 18:24:30 Slp: Parameter 4 :
System.Data.SqlClient.SqlException@-2146232060
2014-07-12 18:24:30 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
2014-07-12 18:24:30 Slp:
Final Parameter Values
2014-07-12 18:24:30 Slp: Parameter 0 : SQL Server 2008
R2@RTM@
2014-07-12 18:24:30 Slp: Parameter 2 : 0x1BBF2F31
2014-07-12 18:24:30 Slp: Parameter 3 : 0x0A2FBD17@1211@1
2014-07-12 18:24:30 Slp: Parameter 4 : 0x3906094D
2014-07-12 18:24:30 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
2014-07-12 18:24:36 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2014-07-12 18:24:36 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2014-07-12 18:24:36 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2014-07-12 18:25:26 Slp: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
2014-07-12 18:25:32 Slp: Watson bucket for exception based failure has been created
2014-07-12 18:25:32 SQLEngine: Copying 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' to 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt' ...
2014-07-12 18:25:32 Slp: Sco: Attempting to set file full path to 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG'
2014-07-12 18:25:32 Slp: Sco: Attempting to normalize directory path 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG'
2014-07-12 18:25:32 Slp: Sco: Attempting to check if file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' exists
2014-07-12 18:25:32 Slp: Sco: Attempting to copy file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' to file 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to check if file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' exists
2014-07-12 18:25:32 Slp: Sco: Attempting to normalize directory path 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to set file full path to 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to normalize directory path 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to check if directory path 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' is equal to path 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to check if directory path 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' is equal to path 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to normalize directory path 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG'
2014-07-12 18:25:32 Slp: Sco: Attempting to normalize directory path 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to get security descriptor for file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG'
2014-07-12 18:25:32 Slp: Sco: Attempting to check if file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' exists
2014-07-12 18:25:32 Slp: Sco: Returning security descriptor O:NSG:NSD:AI(A;ID;FA;;;NS)(A;ID;FA;;;SY)(A;ID;FA;;;BA)(A;ID;FA;;;S-1-5-21-3076291671-3154185214-3698330068-1005)(A;ID;0x1201ff;;;S-1-5-21-3076291671-3154185214-3698330068-1006)
2014-07-12 18:25:32 Slp: Sco: Attempting to dispose script
Please note that this is NOT a question about fixing this one installation. This is an SQL Server Express install as part of my application install and MUST WORK FIRST TIME, EVERY TIME. Please direct me.
Paul T.Here are the parameters used with the SQL Server Express installer EXE (both x86 and x64):
/q /hideconsole /action=Install /features=SQL /instancename=SQLEXPRESS /enableranu=1 /sqlsvcaccount="NT Authority\Network Service" /AddCurrentUserAsSqlAdmin /skiprules=RebootRequiredCheck /IAcceptSQLServerLicenseTerms
I presume that TCP/IP is not enabled by default for Express installs. I THINK that named pipe should be enabled.
Summary.txt is copied below:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068119551
Exit facility code: 1211
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-07-12 18:06:14
End time: 2014-07-12 18:25:44
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.4000.0%26EvtType%3d0x1BBF2F31%400x3906094D
Machine Properties:
Machine name: WIN-EAD5VG4PBDE
Machine processor count: 1
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: c:\b610200f3dc88995d16c2effd8b6ac\x86\setup\
Installation edition: EXPRESS
Slipstream: True
SP Level 2
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: c:\b610200f3dc88995d16c2effd8b6ac\PCUSOURCE
PID: *****
QUIET: True
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Authority\Network Service
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0x0A2FBD17@1211@1
Configuration error description: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Detail.txt
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0x0A2FBD17@1211@1
Configuration error description: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Detail.txt
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SystemConfigurationCheck_Report.htmd
The entire contents of the installation log can be found in ZIP format here:
https://onedrive.live.com/redir?resid=8E983C44B610198D!3984&authkey=!AFbuZaCG3Lm38Pw&ithint=folder%2c.zip
Paul T.
Maybe you are looking for
-
Hierarchy load - Error RSAR 683 Syntax error in generated program, row 0
Hi guys, When I load the hierarchy on ZMATERIAL (load from 0MATERIAL hierarchy - source system BW), I have this error message : RSAR 683 Syntax error in generated program, row 0. I have found several SAP notes, especially [Sap Note 944842|https://www
-
NiUSRP 1.2 / USRP N210 / beat frequencies LO
Hi, I made a Labview 2012 program based on some examples of the ni USRP 1.2 software, for being executed in my USRP N210. The objective of my program is to measure a signal, that right now is generated by a RF signal generator, after doing an fft plo
-
Offsetting Weeks to check for sick days
Hi, this is all a bit new to me so please forgive any naivety (or simplicity) of this request I've got the number of absent days by week per line in a DSO, For each instance of a sickday in a week I'd like to be able to see if that is equal to the nu
-
2 Second Button Press Activation
I'm working on a touchscreen application and I have a basic control that has large buttons on it. I want to make the buttons only activate if the user has held his/her finger on the button for 2 seconds or more. I'm using Mouse Down event structures
-
How do I figure out what fonts won't turn into graphics?
Ok. I've made sure that opacity it set to 100% for my text but they are still appearing as graphics when published to my .Mac account. I'm not assuming that there are only certain fonts that stay as text (as long as you leave opacity at 100%). Is the