Sol Man 4.0 installation - dispatcher stops
Hi All,
I have just installed oracle 10.2.0.2. Now I am installing Solution Manager 4.0. (OS is windows 2003) I have reached the stage where it tries to 'start the ABAP instance'. The issues is that the dispatcher stops and the sapinst throws error.
The dev_disp says :
Tue Jun 26 13:02:40 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5275]
MtxInit: 30000 0 0
ERROR => DpSysAdmExtCreate: ShmCreate (CREATE) [dpxxtool2.c 607]
ERROR => dispatcher already running ???? [dpxxtool2.c 608]
ERROR => I better EXIT before I do any (more) damage [dpxxtool2.c 610]
I have enabled the /PAE /3GB option in boot.ini. Increased the paging file size to 54 GB. Restarted the system.
Increased profile parameters PHYS_MEMSIZE to 9216.
SAPOSCOL and all other services are running. R3trans -d is successful.
Database is OPEN.
Still when I try to start SAP from MMC the dispatcher stops.
Even updated the kernel (it shows two kernels, UC n Non-UC - updated both). Still No luck.
I do have another 'Java Only' system (live auction) installed on the same server.
Any Ideas ??
Cheers
Kunal.
Hey Buddy,
Looks to me like its looking for Host address and its unable to resolve hostname.
Kindly check once with your network port IP. Is this running on Domain or local host?
If local host assign a IP adddress ( static ) and check it should work.
Thanks & Regards
Vivek
Similar Messages
-
Sol Man 4.0 Installation Error ECJS-30196 Connect to SAP gateway failed
Hi Experts
I am trying to install Solution Manager 4.0.
While installing SolMan, everything goes fine, until step # 31 create java users (creating SAP Jsf user), then it runs into below error messages.
CJS-30196 Connect to SAP gateway failedConnect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1LOCATION CPIC (TCP/IP) on local host with UnicodeERROR partner 'solman:sapgw23' not reachedTIME Mon Aug 13 17:44:59 2007RELEASE 700COMPONENT NI (network interface)VERSION 38RC -10MODULE nixxi.cppLINE 2770DETAIL NiPConnect2SYSTEM CALL connectERRNO 10061ERRNO TEXT WSAECONNREFUSED: Connection refusedCOUNTER 1
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR timeout occured
TIME Mon Aug 13 17:17:35 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -5
MODULE gwxx.c
LINE 480
DETAIL timeout 60000 msecs
SYSTEM CALL NiRead
COUNTER 1
Any suggestions/ideas for this error
Regards
RahulHi Experts
I am trying to install Solution Manager 4.0.
While installing SolMan, everything goes fine, until step # 31 create java users (creating SAP Jsf user), then it runs into below error messages.
CJS-30196 Connect to SAP gateway failedConnect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1LOCATION CPIC (TCP/IP) on local host with UnicodeERROR partner 'solman:sapgw23' not reachedTIME Mon Aug 13 17:44:59 2007RELEASE 700COMPONENT NI (network interface)VERSION 38RC -10MODULE nixxi.cppLINE 2770DETAIL NiPConnect2SYSTEM CALL connectERRNO 10061ERRNO TEXT WSAECONNREFUSED: Connection refusedCOUNTER 1
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR timeout occured
TIME Mon Aug 13 17:17:35 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -5
MODULE gwxx.c
LINE 480
DETAIL timeout 60000 msecs
SYSTEM CALL NiRead
COUNTER 1
Any suggestions/ideas for this error
Regards
Rahul -
How to check whether my sol man installation is on sol man 7.0 or?
Hellol All,
Can anyone help me How to check whether my sol man installation is on sol man 7.0 or sol man 7.0 EHP1.
Thank you,
SrihariHi,
Your system status should tell you that. Any logged in screen of your solution manager system --> Status. Component Version should be as "SAP EHP 1 for SAP Solution Manager 7.0" to be Ehp1 or "SAP Solution Manager 7.0"
Hope this answers your question.
Feel free to revert back.
-=-Ragu -
Dispatcher stopped because of error while applying patches.
<b>Hi All,
I was applying basis patch level 12 on a Netweaver '04 application server but unfortunately the tablespace got filled up and the SAP application became unresponsive.
Now i have created new datafiles and also deleted the patch entry from tables PAT01 and PAT02. But still the dispatcher stops when i try to logon.
I am pasting the contents of the file dev_disp.
Please somebody help me out.</b>
trc file: "dev_disp", trc level: 1, release: "640"
Tue Feb 27 13:00:30 2007
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, Unicode
pid 3816
***LOG Q00=> DpSapEnvInit, DPStart (00 3816) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Tue Feb 27 13:00:35 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 25008 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04550040, size: 3207168)
DpShMCreate: allocated sys_adm at 04550040
DpShMCreate: allocated wp_adm at 04551B58
DpShMCreate: allocated tm_adm_list at 04557D08
DpShMCreate: allocated tm_adm at 04557D30
DpShMCreate: allocated wp_ca_adm at 047FE978
DpShMCreate: allocated appc_ca_adm at 04804738
DpShMCreate: allocated comm_adm_list at 04806678
DpShMCreate: allocated comm_adm at 04806690
DpShMCreate: allocated vmc_adm_list at 0484D360
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0484D388
DpShMCreate: allocated wall_adm at 0484D390
MBUF state OFF
Tue Feb 27 13:00:36 2007
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1227 blocks reserved for free list.
ES initialized.
Tue Feb 27 13:00:37 2007
J2EE server info
start = TRUE
state = STARTED
pid = 2244
argv[0] = F:\usr\sap\HMI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = F:\usr\sap\HMI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=F:\usr\sap\HMI\SYS\profile\HMI_DVEBMGS00_hsdnt2400904
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1108
argv[5] = -DLISTEN_PORT=1109
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=HMI
argv[8] = -DSAPMYNAME=hsdnt2400904_HMI_00
argv[9] = -DSAPPROFILE=F:\usr\sap\HMI\SYS\profile\HMI_DVEBMGS00_hsdnt2400904
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
***LOG Q0K=> DpMsAttach, mscon ( hsdnt2400904) [dpxxdisp.c 9736]
Tue Feb 27 13:00:39 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
Tue Feb 27 13:00:40 2007
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Tue Feb 27 13:00:42 2007
DpJ2eeLogin: j2ee state = CONNECTED
Tue Feb 27 13:01:17 2007
ERROR => W0 (pid 936) died [dpxxdisp.c 12187]
ERROR => W1 (pid 2252) died [dpxxdisp.c 12187]
ERROR => W2 (pid 3820) died [dpxxdisp.c 12187]
ERROR => W3 (pid 2264) died [dpxxdisp.c 12187]
ERROR => W4 (pid 732) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W5 (pid 2268) died [dpxxdisp.c 12187]
ERROR => W6 (pid 2292) died [dpxxdisp.c 12187]
ERROR => W7 (pid 2300) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W8 (pid 2308) died [dpxxdisp.c 12187]
ERROR => W9 (pid 2316) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W10 (pid 1732) died [dpxxdisp.c 12187]
ERROR => W11 (pid 1704) died [dpxxdisp.c 12187]
ERROR => W12 (pid 2344) died [dpxxdisp.c 12187]
ERROR => W13 (pid 2352) died [dpxxdisp.c 12187]
ERROR => W14 (pid 2360) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W15 (pid 2368) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W16 (pid 1740) died [dpxxdisp.c 12187]
ERROR => W17 (pid 2384) died [dpxxdisp.c 12187]
ERROR => W18 (pid 2328) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-936 (SIGUSR2)
ERROR => DpWpKill(936, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-2252 (SIGUSR2)
ERROR => DpWpKill(2252, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3820 (SIGUSR2)
ERROR => DpWpKill(3820, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-2264 (SIGUSR2)
ERROR => DpWpKill(2264, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-732 (SIGUSR2)
ERROR => DpWpKill(732, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-2268 (SIGUSR2)
ERROR => DpWpKill(2268, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-2292 (SIGUSR2)
ERROR => DpWpKill(2292, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-2300 (SIGUSR2)
ERROR => DpWpKill(2300, SIGUSR2) failed [dpxxtool.c 2468]
killing W8-2308 (SIGUSR2)
ERROR => DpWpKill(2308, SIGUSR2) failed [dpxxtool.c 2468]
killing W9-2316 (SIGUSR2)
ERROR => DpWpKill(2316, SIGUSR2) failed [dpxxtool.c 2468]
killing W10-1732 (SIGUSR2)
ERROR => DpWpKill(1732, SIGUSR2) failed [dpxxtool.c 2468]
killing W11-1704 (SIGUSR2)
ERROR => DpWpKill(1704, SIGUSR2) failed [dpxxtool.c 2468]
killing W12-2344 (SIGUSR2)
ERROR => DpWpKill(2344, SIGUSR2) failed [dpxxtool.c 2468]
killing W13-2352 (SIGUSR2)
ERROR => DpWpKill(2352, SIGUSR2) failed [dpxxtool.c 2468]
killing W14-2360 (SIGUSR2)
ERROR => DpWpKill(2360, SIGUSR2) failed [dpxxtool.c 2468]
killing W15-2368 (SIGUSR2)
ERROR => DpWpKill(2368, SIGUSR2) failed [dpxxtool.c 2468]
killing W16-1740 (SIGUSR2)
ERROR => DpWpKill(1740, SIGUSR2) failed [dpxxtool.c 2468]
killing W17-2384 (SIGUSR2)
ERROR => DpWpKill(2384, SIGUSR2) failed [dpxxtool.c 2468]
killing W18-2328 (SIGUSR2)
ERROR => DpWpKill(2328, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:27 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Tue Feb 27 07:31:27 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 936 Ended no 1 0 0
1 DIA 2252 Ended no 1 0 0
2 DIA 3820 Ended no 1 0 0
3 DIA 2264 Ended no 1 0 0
4 DIA 732 Ended no 1 0 0
5 UPD 2268 Ended no 1 0 0
6 UPD 2292 Ended no 1 0 0
7 UPD 2300 Ended no 1 0 0
8 ENQ 2308 Ended no 1 0 0
9 ENQ 2316 Ended no 1 0 0
10 BTC 1732 Ended no 1 0 0
11 BTC 1704 Ended no 1 0 0
12 BTC 2344 Ended no 1 0 0
13 BTC 2352 Ended no 1 0 0
14 BTC 2360 Ended no 1 0 0
15 SPO 2368 Ended no 1 0 0
16 UP2 1740 Ended no 1 0 0
17 UP2 2384 Ended no 1 0 0
18 UP2 2328 Ended no 1 0 0
Dispatcher Queue Statistics Tue Feb 27 07:31:27 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Tue Feb 27 07:31:27 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Feb 27 07:31:27 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:32 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2244)
killing process (2244) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiSelClear: removed hdl 8 from selectset
DpDelSocketInfo: del info for socket 8 (type=8)
NiBufClose: clear extensions for hdl 8
NiBufSetStat: bufstat of hdl 8 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 8 / socket 1324
NiSelClear: removed hdl 4 from selectset
DpDelSocketInfo: del info for socket 4 (type=9)
NiBufClose: clear extensions for hdl 4
NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 4 / socket 1548
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (2216) (SOFT_KILL)
Stop icman
killing process (2220) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:2216 HANDLE:1568)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:33 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:2216 HANDLE:1568)
[DpProcDied] Process died (PID:2220 HANDLE:1560)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:34 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:35 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:36 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:38 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:39 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:40 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:41 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:42 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:43 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:44 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:45 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:46 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:47 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:48 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:49 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:50 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:51 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:52 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:54 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:55 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:56 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:57 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:58 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:59 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:00 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:01 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:02 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:03 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:04 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:05 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:06 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:07 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:08 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:09 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:10 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:11 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:12 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:13 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:14 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:15 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:16 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:17 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:18 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:19 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:2244 HANDLE:1536)
NiIMyHostName: hostname = 'hsdnt2400904'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 5 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/19
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 5
NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 5 / socket 1540
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3816) [dpxxdisp.c 8495]
Good Bye .....
<b>Thanks in Advance,
Abhishek Srivastava</b>Hi Matt,
I am pasting the contents of tha file dev_w0.
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Tue Feb 27 17:34:23 2007
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\HMI\SYS\exe\run\dboraslib.dll' ...
B Library 'F:\usr\sap\HMI\SYS\exe\run\dboraslib.dll' loaded
B Version of 'F:\usr\sap\HMI\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.39)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 43
M intno 20020600
M make: multithreaded, Unicode
M pid 2664
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2664) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 25008 (1316)
M DpShMCreate: sizeof(tm_adm) 2780232 (13832)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (372)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04550040, size: 3207168)
M DpShMCreate: allocated sys_adm at 04550040
M DpShMCreate: allocated wp_adm at 04551B58
M DpShMCreate: allocated tm_adm_list at 04557D08
M DpShMCreate: allocated tm_adm at 04557D30
M DpShMCreate: allocated wp_ca_adm at 047FE978
M DpShMCreate: allocated appc_ca_adm at 04804738
M DpShMCreate: allocated comm_adm_list at 04806678
M DpShMCreate: allocated comm_adm at 04806690
M DpShMCreate: allocated vmc_adm_list at 0484D360
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0484D388
M DpShMCreate: allocated wall_adm at 0484D390
X
X Tue Feb 27 17:34:24 2007
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Feb 27 17:34:27 2007
M calling db_connect ...
C Got ORACLE_HOME=F:\oracle\HMI\920 from environment
C *** ERROR => Couldn't initialize Oracle Client Library
please check your installation
[dbsloci.c 8095]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1269]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9413]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server hsdnt2400904_HMI_00 on host hsdnt2400904 (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Tue Feb 27 17:34:27 2007
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9589
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2664) [dpnttool.c 357]
Please help me out if you have any solution.
Regards,
Abhishek Srivastava -
hai gurus
i need to start my sap server dispatcher stopped probleam as
how to over come this problem
gvrkdear markus
iam new to sap , how to chcek database up one more old log
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid ECC
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 3660
Fri Dec 10 14:08:08 2010
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3660) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Fri Dec 10 14:08:13 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc62_ECC_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06640040, size: 4653368)
DpShMCreate: allocated sys_adm at 06640040
DpShMCreate: allocated wp_adm at 06641E40
DpShMCreate: allocated tm_adm_list at 066465C0
DpShMCreate: allocated tm_adm at 066465F0
DpShMCreate: allocated wp_ca_adm at 06A15890
DpShMCreate: allocated appc_ca_adm at 06A1B650
DpShMCreate: allocated comm_adm at 06A1D590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06A9E450
DpShMCreate: allocated gw_adm at 06A9E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06A9E4C0
DpShMCreate: allocated wall_adm at 06A9E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Fri Dec 10 14:08:15 2010
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0F=> DpLoopInit, nomstry () [dpxxdisp.c 1710]
ERROR => Connection to Message Server failed - check installation [dpxxdisp.c 1711]
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Dec 10 14:08:16 2010
CCMS: start to initalize 3.X shared alert area (first segment).
Fri Dec 10 14:08:55 2010
ERROR => W0 (pid 3964) died [dpxxdisp.c 14241]
ERROR => W1 (pid 3972) died [dpxxdisp.c 14241]
ERROR => W2 (pid 3980) died [dpxxdisp.c 14241]
ERROR => W3 (pid 3988) died [dpxxdisp.c 14241]
ERROR => W4 (pid 3996) died [dpxxdisp.c 14241]
ERROR => W5 (pid 4004) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W6 (pid 4012) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W7 (pid 4020) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W8 (pid 4028) died [dpxxdisp.c 14241]
ERROR => W9 (pid 4036) died [dpxxdisp.c 14241]
ERROR => W10 (pid 4044) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W11 (pid 4052) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W12 (pid 4060) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xa0 --> 0x80
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 10 14:09:05 2010
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Dec 10 08:39:05 2010
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3964 Ended no 1 0 0
1 DIA 3972 Ended no 1 0 0
2 DIA 3980 Ended no 1 0 0
3 DIA 3988 Ended no 1 0 0
4 DIA 3996 Ended no 1 0 0
5 DIA 4004 Ended no 1 0 0
6 UPD 4012 Ended no 1 0 0
7 ENQ 4020 Ended no 1 0 0
8 BTC 4028 Ended no 1 0 0
9 BTC 4036 Ended no 1 0 0
10 BTC 4044 Ended no 1 0 0
11 SPO 4052 Ended no 1 0 0
12 UP2 4060 Ended no 1 0 0
Dispatcher Queue Statistics Fri Dec 10 08:39:05 2010
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
4
4
2000
4
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 8
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Fri Dec 10 08:39:05 2010
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Dec 10 08:39:05 2010
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 10 14:09:10 2010
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >gcecc62_ECC_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3900) (SOFT_KILL)
Stop icman
killing process (3956) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3900 HANDLE:1556)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 10 14:09:11 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3900 HANDLE:1556)
wait for end of icman
[DpProcDied] Process lives (PID:3956 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 10 14:09:12 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3956 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 10 14:09:13 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3956 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 10 14:09:14 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3956 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 10 14:09:15 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3956 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 10 14:09:16 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3956 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 10 14:09:17 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3956 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 10 14:09:18 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3956 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 10 14:09:19 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3956 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 10 14:09:20 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3956 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 10 14:09:21 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3956 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 10 14:09:22 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3956 HANDLE:1560)
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3660) [dpxxdisp.c 10259]
Good Bye ..... -
Dispatcher stopped and Workprocessors are Ended State
Hi Experts
Suddenly my dispatcher stopped and all work processors are in Ended state in the ECC6.0 with Oracle database in windows 2003. I have checked the Memory parameters and resetted the values but still getting the same problem here i am pasting the dev_disp and dev_w0 files. Please help me need full
Regards
Chandra
dev_disp::
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid CHE
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 175
intno 20050900
make: multithreaded, Unicode, optimized
pid 1536
Sun Dec 07 13:05:43 2008
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 1536) [dpxxdisp.c 1261]
shared lib "dw_xml.dll" version 175 successfully loaded
shared lib "dw_xtc.dll" version 175 successfully loaded
shared lib "dw_stl.dll" version 175 successfully loaded
shared lib "dw_gui.dll" version 175 successfully loaded
shared lib "dw_mdm.dll" version 175 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Sun Dec 07 13:05:54 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0081.qqq.nxst) took 11 seconds
Sun Dec 07 13:05:59 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >I3LSERVSAP1_CHE_00 <
DpShMCreate: sizeof(wp_adm) 23856 (1704)
DpShMCreate: sizeof(tm_adm) 4415616 (21968)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06840040, size: 5081056)
DpShMCreate: allocated sys_adm at 06840040
DpShMCreate: allocated wp_adm at 06842118
DpShMCreate: allocated tm_adm_list at 06847E48
DpShMCreate: allocated tm_adm at 06847E78
DpShMCreate: allocated wp_ca_adm at 06C7DEF8
DpShMCreate: allocated appc_ca_adm at 06C83CF8
DpShMCreate: allocated comm_adm at 06C85C38
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06D06AF8
DpShMCreate: allocated gw_adm at 06D06B38
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06D06B68
DpShMCreate: allocated wall_adm at 06D06B70
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 4075 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1668]
***LOG Q0K=> DpMsAttach, mscon ( I3LSERVSAP1) [dpxxdisp.c 12364]
DpStartStopMsg: send start message (myname is >I3LSERVSAP1_CHE_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 175
Release check o.K.
Sun Dec 07 13:06:39 2008
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:06:49 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sun Dec 07 07:36:49 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 6120 Ended no 1 0 0
1 DIA 2860 Ended no 1 0 0
2 DIA 6020 Ended no 1 0 0
3 DIA 5632 Ended no 1 0 0
4 DIA 588 Ended no 1 0 0
5 DIA 6016 Ended no 1 0 0
6 UPD 484 Ended no 1 0 0
7 ENQ 2268 Ended no 1 0 0
8 BTC 584 Ended no 1 0 0
9 BTC 6064 Ended no 1 0 0
10 BTC 4228 Ended no 1 0 0
11 BTC 5980 Ended no 1 0 0
12 SPO 1984 Ended no 1 0 0
13 UP2 5996 Ended no 1 0 0
Dispatcher Queue Statistics Sun Dec 07 07:36:49 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Sun Dec 07 07:36:49 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Sun Dec 07 07:36:49 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:06:54 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >I3LSERVSAP1_CHE_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (6084) (SOFT_KILL)
Stop icman
killing process (6128) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:6084 HANDLE:1484)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:06:55 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:6084 HANDLE:1484)
wait for end of icman
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:06:56 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:06:57 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:06:58 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:06:59 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:07:00 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:07:01 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:07:02 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:07:03 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:07:04 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:07:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6128 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Dec 07 13:07:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:6128 HANDLE:1488)
DpStartStopMsg: send stop message (myname is >I3LSERVSAP1_CHE_00 <)
NiIMyHostName: hostname = 'I3LSERVSAP1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Sun Dec 07 13:07:07 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12710]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1420 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1420 (pos=2)
SiSelNRemove: removed sock 1420
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/14
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1420
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 1536) [dpxxdisp.c 10908]
Good Bye .....
dev_w0::
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Sun Dec 07 13:05:59 2008
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\CHE\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'F:\usr\sap\CHE\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'F:\usr\sap\CHE\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.167)
B New connection 0 created
M sysno 00
M sid CHE
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 175
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 6120
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 6120) [dpxxdisp.c 1323]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 23856 (1704)
M DpShMCreate: sizeof(tm_adm) 4415616 (21968)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1544)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06840040, size: 5081056)
M DpShMCreate: allocated sys_adm at 06840040
M DpShMCreate: allocated wp_adm at 06842118
M DpShMCreate: allocated tm_adm_list at 06847E48
M DpShMCreate: allocated tm_adm at 06847E78
M DpShMCreate: allocated wp_ca_adm at 06C7DEF8
M DpShMCreate: allocated appc_ca_adm at 06C83CF8
M DpShMCreate: allocated comm_adm at 06C85C38
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06D06AF8
M DpShMCreate: allocated gw_adm at 06D06B38
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06D06B68
M DpShMCreate: allocated wall_adm at 06D06B70
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Sun Dec 07 13:06:00 2008
M ThInit: running on host I3LSERVSAP1
M
M Sun Dec 07 13:06:01 2008
M calling db_connect ...
C Prepending F:\usr\sap\CHE\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@CHE on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0672A1A8 0672F744 0672EFCC
C Attaching to DB Server CHE (con_hdl=0,svchp=0672EF18,srvhp=06740B04)
C Starting user session (con_hdl=0,svchp=0672EF18,srvhp=06740B04,usrhp=06755878)
C Now '/@CHE' is connected: con_hdl=0, nls_hdl=0, session_id=85.
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0672EF18,usrhp=06755878)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@CHE on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0672A1A8 0672F744 0672EFCC
C Starting user session (con_hdl=0,svchp=0672EF18,srvhp=06740B04,usrhp=06755878)
C Now 'SAPSR3/<pwd>@CHE' is connected: con_hdl=0, nls_hdl=0, session_id=85.
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance CHE is running on I3LSERVSAP1 with ORACLE version 10.2.0.2.0 since DEC 07, 2008, 12:36:31
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20081207 130601 I3LSERVSAP1
C build_stmt: reallocating stmt buffer: 256 -> 2000 characters
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0B3A0040, size: 4400000)
I *** ERROR => [MapOsShm] Can't find free space for Shared Memory (Size=720000 KB)
[shmnt.c 2174]
I *** ERROR => [CreateOsShm] MapViewOfFile(Key=9,Handle=0x000004DC) failed with Err=0
[shmnt.c 2174]
I *** ERROR => ShmCreate: Create (9,737280000,3) failed [shmnt.c 506]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel Pentium Pro
Processor-Count : 8
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 2
NT Pagefile Informations
Config. minimum size : 12570624 K
Config. maximum size : 12570624 K
Avail. maximum size : 12570624 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
4190208 K
4190208 K
4190208 K
4190208 K
2
d:\pagefile.sys
4190208 K
4190208 K
4190208 K
4190208 K
3
f:\pagefile.sys
4190208 K
4190208 K
4190208 K
4190208 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 0
Commit Charge Total : 6571584 K
Commit Charge Limit : 15822776 K
Commit Charge Peak : 7495116 K
Phys.Memory Total : 54 K
Phys.Memory Available : 93650276 K
File Cache : 17399116 K
Kernel Memory Total : 2084222616 K
Kernel Memory Paged : 0 K
Kernel Memory Nonpaged : 93650304 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 837328 K
Private Pages : 0 K
Total heap size : 14532 K
Virtual memory regions : 0 K
Uncommitted heap memory : 6440 K
Allocated heap memory : 6850 K
Moveable heap memory : 0 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
1940
sapstartsrv.exe
15956 K
15956 K
18656 K
18700 K
4
5716
msg_server.EXE
[MS] CHE_00
8508 K
8508 K
11000 K
11000 K
2
1536
disp+work.EXE
[DP] CHE_00
93256 K
93256 K
69540 K
69540 K
22
5772
igswd.EXE
[**] CHE_00
2796 K
3048 K
1436 K
1724 K
0
1304
igsmux.exe
12012 K
12012 K
13032 K
13032 K
2
5696
igspw.exe
2536 K
2536 K
2336 K
2336 K
0
5688
igspw.exe
2536 K
2536 K
2336 K
2336 K
0
6084
gwrd.EXE
[GW] CHE_00
10164 K
10164 K
9996 K
17924 K
2
6128
icman.EXE
[**] CHE_00
86128 K
86128 K
88096 K
88096 K
21
6120
disp+work.EXE
31808 K
31904 K
82200 K
85356 K
7
2860
disp+work.EXE
[WP] CHE_00
30604 K
30604 K
81656 K
85356 K
7
6020
disp+work.EXE
[WP] CHE_00
16080 K
16080 K
67372 K
67372 K
3
5632
disp+work.EXE
[WP] CHE_00
16104 K
16104 K
67372 K
67372 K
3
588
disp+work.EXE
[WP] CHE_00
28804 K
28804 K
80672 K
85356 K
7
6016
disp+work.EXE
[WP] CHE_00
16084 K
16084 K
67372 K
67372 K
3
484
disp+work.EXE
[WP] CHE_00
16084 K
16084 K
67372 K
67372 K
3
2268
disp+work.EXE
[WP] CHE_00
16080 K
16080 K
67372 K
67372 K
3
584
disp+work.EXE
[WP] CHE_00
19112 K
19112 K
85360 K
85360 K
4
6064
disp+work.EXE
[WP] CHE_00
30972 K
30972 K
81696 K
85356 K
7
4228
disp+work.EXE
[WP] CHE_00
30376 K
30376 K
81488 K
85356 K
7
5980
disp+work.EXE
[WP] CHE_00
16080 K
16080 K
67372 K
67372 K
3
1984
disp+work.EXE
[WP] CHE_00
16080 K
16080 K
67372 K
67372 K
3
5996
disp+work.EXE
[WP] CHE_00
16080 K
16080 K
67372 K
67372 K
3
Sum
534240 K
1248476 K
M *** ERROR => ThShMCreate: ShmCreate SHM_ROLL_AREA_KEY failed [thxxhead.c 2598]
M *** ERROR => ThIPCInit: ThShMCreate [thxxhead.c 2095]
M ***LOG R19=> ThInit, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1532]
M in_ThErrHandle: 1
M *** ERROR => ThInit: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 10534]
M
M Info for wp 0
M
M pid = 6120
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server I3LSERVSAP1_CHE_00 on host I3LSERVSAP1 (wp 0)
M * ERROR ThInit: ThIPCInit
M *
M * TIME Sun Dec 07 13:06:01 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 17
M * MODULE thxxhead.c
M * LINE 10754
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 6120) [dpnttool.c 333]Hi Chandra
If you look at the DEV_w0 log you can see the work process are not comming you as they are not getting enough shared memory see this error message
" Can't find free space for Shared Memory (Size=720000 KB) "
Please review the parameter changes made by you in Instance profile before restart of instace. Check the values of these parameters and if you are not sure of the value changed by you undo the parameter changes made before the instace restart
Restart the instance again after these changes in instance profile. for now you can change the instace profile file from OS but don't forget to import this changed profile when instace is up
if you did not changed any Profile parameters, check the physical memory available. chance could you some hardware memory issue. get your os team to check.
Its a clear case of memory issue ..
Rajeev -
Sol Man HP QC Integration -Install TAO Client
Hi Team,
I am having the requirement to integrate SAP Sol Man with HP QC. In the process, it has been mentioned that, "Install TAO Agents in the SAP Backend systems".
What is TAO clinet? Why this is to be installed?
Backend system means , all the satellite systems which have been conneted with sol Man?
Thanks in advance
KumarHi Kumar,
What is TAO clinet? Why this is to be installed?
This is just another type of application. The SAP Test Acceleration and Optimization application supports customers in automating their business process tests by automatically generating draft test cases and test components. Its tight integration with SAP Solution Manager helps in identifying the impacted test cases and components when there are changes in the landscape. The SAP Test Acceleration and Optimization application creates modular test cases, which are easy to maintain, when the test cases are damaged due to functional changes.
The SAP Test Acceleration and Optimization application supports customers in automating their business process tests by automatically generating draft test cases and test components for SAP GUIu2013based transactions. Using this application in combination with the SAP Quality Center application by HP, you can modify, compose and execute automated business process tests in SAP software development and test systems. The SAP Test Acceleration and Optimization application also provides a lot of reusable library components, which could be used for test composition.
Backend system means , all the satellite systems which have been conneted with sol Man?
It might be all the systems or the system through which you want to perform, or the systems that you want to test the Business Processes
For more details please check these SAP Notes.
Note: 1391728 SAP TAO 2.0 Release and Upgrade Information.
Note: 1404715 SAP TAO 2 Installation Information.
SAP TAO Agent will be available with the SAP Solution Tools Plug-In ST-PI which has to be implemented on all the managed systems that we are planning to connect to the SolMan and SAP TAO systems.There is a compatibility matrix which you can find in the Note: 1404715.
Also you can find some materials and demos under http://service.sap.com/testing Test Management and Media Library.
Hope this is helpful.
Thanks & Best Regards,
Raghavendra.
Edited by: Raghavendra B Deshpande on Jul 2, 2010 6:42 AM -
Sizing SOl Man and number/impact of Alerts
We are trying to access our sizing for a Sol man implementation. We
have read the sizing document and it proposes not to have more then 40
alterts per server. Is this 40 limitation at the alert group level or
the alert name level?
Example: Is the 40 limit based on a, b, c or (d and e)?
a. Database Monitoring
b. Space management
c1.Tablespaces
system
d.free space
e. used space
c2.Segments
c3.Performance
c4.SAP consistency
c5.HealthHello Jim,
Yes, this is correct for your current release and SP. There is no standard way to generate alerts for Communication Channels which are in error status. The alerting mechanism is based on messages. The message must throw an error for an alert to be generated.
However, some new functionality will be available with SP13. It does not cover exactly your requirement i.e. when a channel is in error. But it does cover channels that stop polling. See note 1808222 Trigger alerts if channel stops polling, for more details.
Regards
Mark -
Printer Software Installer has stopped working
Product: HP Laser Jet M1005 MFP
OS: Windows 7, 64-bit
Notebook ACER , Aspire 5349, Intel Celeron CPU B800 @ 1.50 GHz
(new notebook, old printer - printer worked well on Windows XP)
I downloaded driver ljM1005-HB-pnp-x64-en. Driver had been extracted and setup started.
Installation started and after some initialization (~10 sec) it kept writing:
Preinstalling the driver files... or Copying files to hard drive... (switching approx. once per second) after a while (~ 20 sec)
Printer Software Installer has stopped working. Windows tried to find solution but did not find anything.
I TRIED ALREADY EVERYTHING. I used patch for AMD processors (of course, did not work); I have Windows installer up to date; I disabled Internet Explorer 9.0 (I cannot uninstall and iether can I step back to IE 8.0 since notebook is brand new); There is no windows driver preinstalled for this printer and there is no similar driver working.
Driver cannot be installed and printer does not work.
Please, help.Hello,
Thanks for the post. This is an odd one, I might suggest the method outlined below in the third link, if that does not help, I might recommend that you post this question on the following links below. Good Luck!
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.* -
Problem installing SQL Server 2012 SP1: "managed sql server installer has stopped working"
Hello,
I have a big problem.
I just downloaded SQL Server 2012 SP1 and I only want to install SSMS. The installer always crashes with an error message "managed sql server installer has stopped working".
I already tried all solutions from Google for this problem but nothing works.
Can someone help me plase?
My System: Window 8 Pro with Visual Studio 2012.
Thanks
SvenWould you please uplaod/share SQL Server setup logs
C:\Program
Files\Microsoft
SQL Server\110\Setup
Bootstrap\Log\20130125_133342
to file sharing service like SkyDrive.com
FAQ
Regards,
Ahmed Ibrahim
SQL Server Setup Team
My Blog
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful"
on posts that help you.
This can be beneficial to other community members reading the thread. -
Error while copy document in Sol Man
Dear friends,
I am working in Sol Man 4.0.
I have loaded the doc 'ABC" in SOLAR02. Now i want to copy the document in RMAMAIN using the option
"Assign Document" ---L> as a copy, i am getting the following error
"FOLDER CLASS IWB4FOLDER is NOT valid for objects of info object class SOLARGEN"
Please guide to solve this..
Regards
KumarAlso have a look at the following notes:-
=> Note 26050 - FIPP:Posting not poss. (SAPMF05A,0700,batch input)
=> Note 800177 - FB01: No batch input data for SAPMF05A 0700
thanks
G. Lakshmipathi -
Generation of Configuration document through Sol Man
Dear Friends,
We are using Solution Manager for our R/3 implementation. In realization phase, we are capturing all transports in BC sets through Sol Man. Via Sol Man, i am executing t.code SCPR3 (Maintain BC set), after capturing all the confugurations in BC set, i am maintaining configuration related details in the same BC set, as below.
In SCPR3 t.code, in top menu,
Edit-----Add documentation.
Here i am maintaining all configuration related details. And saving as "Raw version".
The same way, for all the BC sets, i am maintaing the configuration related details within the same BC set itself.
My client requirement is:
1. Now i am calling all the BC set in Sol Man (t.code SOLAR02, "Configuration" tab, under "type" coloum, i am selecting, "BC set".
2. <b>Now, if i generate "Configuration Guide", the system has to automatically pick the the configuration details, what i have maintained in the BC set (as Add documentation).</b>
How to do this?
regards
SenthilDear Friends,
In SCPR3 t.code, in top menu,
Edit-----Add documentation. can we make this "Add documentation" to be mandatory? So without entering the details, one should not possible to SAVE the BC set.
Can we make any settings for this?
Thanks
Senthil -
hi all, i am facing this problem while starting sap in the console root the status of dispatcher turns from green to yellow and shows status "dispatcher stopped in sap" i went into the work directory file and tried to analyse trace file: "dev_w0"
and trace file: "dev_disp" from the work directory the contents of both the files are included below,i want to know the corrective action so as to start the dispatcher and the work process
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sun Jan 12 02:34:33 2003
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\ERP\SYS\exe\run\dboraslib.dll' ...
M
M Sun Jan 12 02:34:34 2003
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\ERP\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\ERP\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 3460
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3460) [dpxxdisp.c 1016]
I
I Sun Jan 12 02:34:38 2003
I MtxInit: -2 0 0
X
X Sun Jan 12 02:34:39 2003
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X
X Sun Jan 12 02:34:40 2003
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Sun Jan 12 02:34:41 2003
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\ERP\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\ERP\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\ERP\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server dev_ERP_00 on host dev (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sun Jan 12 02:34:41 2003
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3460) [dpnttool.c 345]
trc file: "dev_disp", trc level: 1, release: "620"
Sun Jan 12 02:34:24 2003
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c 226]
Error 126 = "The specified module could not be found."
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 251
intno 20020600
pid 3396
***LOG Q00=> DpSapEnvInit, DPStart (00 3396) [dpxxdisp.c 966]
shared lib "dw_xml.dll" version 252 successfully loaded
shared lib "dw_xtc.dll" version 252 successfully loaded
shared lib "dw_stl.dll" version 252 successfully loaded
Sun Jan 12 02:34:28 2003
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3140]
MtxInit: -2 0 0
MBUF state OFF
Sun Jan 12 02:34:29 2003
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1190 MB
<ES> 1189 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( dev) [dpxxdisp.c 8832]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Sun Jan 12 02:34:30 2003
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 940]
DpMsgAdmin: Set patchno for this platform to 251
Release check o.K.
Sun Jan 12 02:35:09 2003
ERROR => W0 (pid 3460) died [dpxxdisp.c 11210]
ERROR => W1 (pid 3468) died [dpxxdisp.c 11210]
ERROR => W2 (pid 3476) died [dpxxdisp.c 11210]
ERROR => W3 (pid 3484) died [dpxxdisp.c 11210]
ERROR => W4 (pid 3492) died [dpxxdisp.c 11210]
ERROR => W5 (pid 3500) died [dpxxdisp.c 11210]
ERROR => W6 (pid 3512) died [dpxxdisp.c 11210]
ERROR => W7 (pid 3520) died [dpxxdisp.c 11210]
ERROR => W8 (pid 3536) died [dpxxdisp.c 11210]
ERROR => W9 (pid 3544) died [dpxxdisp.c 11210]
ERROR => W10 (pid 3572) died [dpxxdisp.c 11210]
ERROR => W11 (pid 3580) died [dpxxdisp.c 11210]
ERROR => W12 (pid 3596) died [dpxxdisp.c 11210]
ERROR => W13 (pid 3604) died [dpxxdisp.c 11210]
ERROR => W14 (pid 3616) died [dpxxdisp.c 11210]
ERROR => W15 (pid 3624) died [dpxxdisp.c 11210]
ERROR => W16 (pid 3636) died [dpxxdisp.c 11210]
my types changed after wp death/restart 0xbf --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
ERROR => DpMBufRead: state MBUF_PREPARED, opmode MBUF_USE [dpxxmbuf.c 503]
ERROR => DpModState: DpMBufRead failed (-1) [dpxxdisp.c 13129]
Sun Jan 12 02:35:18 2003
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9058]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3396) [dpxxdisp.c 7637]Hi,
> M Sun Jan 12 02:34:34 2003
> M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\ERP\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
> M Error 126 = "The specified module could not be found."
> B *** ERROR => Couldn't load library 'C:\usr\sap\ERP\SYS\exe\run\dboraslib.dll'
As per the error, it looks like some library files are missing in kernel directory. Have you done the kernel upgrade recently ?
Thanks
Sunny -
Problem in moving project from Old Sol Man 3.1 to New Sol Man 4.0
Hi All,
I am trying to move a project from solution manager 3.1 version to a new solution manager 4.0 version. I followed the below steps:
1.Slected and transported the project using solar_project_admin tcode and created the transort requests in the old sol man version 3.1.
2.Copied the cofile and datafiles from old sol man and kept in trans directory of new Sol man 4.0 version at OS level.
3.Imported the requests into the new Sol Manager 4.0 successfully
4.When I tried to open the imported project it told me to run the "solman_log_comp_mgr program" to convert the project to the central logical components. I just did it and it went well.
I can see the project and do see the document types but no document names and getting all sorts of error messages when I tried to open these documents. Also I dont see the logical components under system landscape.
Before importing, I just have configured servers/hosts, databses and all the components of system landscapes in the new solution manager.
I request you to help me solve this issue. I also would like to know whether i followed proper procedures that i listed above? If not please suggest what procedures I should have follwed.
Thanks in advance.
Aravind SerikarHi Aravind,
to transport a project from 3.1 to 4.0 I would not use SOLAR_PROJECT_ADMIN to "migrate" a project. There for we developed SOLAR_MIGRATION there you can transport system landscape info, also you can transport projects. You should only transport system landscape info if in 4.0 SMSY is EMPTY. To transport projects you have only to specify your project and define a local folder. In this folder we store a few important information. Then all information will be collected in a batch job and automatically exported. Then you have to copy the data file and the cofile into the new trans folder. BUT do NOT forget the i-file. In the folder cofiles you will find a i-file, because we export knowledge warehouse content. This file is important, if you forget it you will get a return code 8. You do NOT have to add the files in the import buffer, we will do this automatically. To import the project, you have to call SOLAR_MIGRATION in SolMan 4.0 there you have to select import, then specify the folder with the few important information. We upload the info and start the import. That is it
Regards,
uDo -
Hi all,
I want to request SAP the latest DVDs of Support Package Stack for NW7.0, ERP 6.0, and Sol Man. 4.0, is it possible & how to do it?
Thanks,
Toan DoHi Toan,
It's possible to order them or download them from SAP Marketplace
http://service.sap.com/swdc
Regards
Juan
Maybe you are looking for
-
Some devices in MBP are not working in win7 with bootcamp drivers
Hi. I've just got my new mac book pro 15", with SSD 255 disk and hi-ress antiglare screen. I've used bootcamp to partition the disk and I've installed windows 7 64bit pro Greek. The problem is that, after installing the bootcamp drivers, some hardwar
-
How to add new CMP field to CMP bean
I am back for your amusement. I have seen similar things to this in other postings, but I have not been able to find one that, when action is taken, solves my problem. I am using Sun Java Studio Enterprise 7 2004Q4 Our database changed by adding one
-
hi, last week i change the e-mail on my idapple, yesterday night i restore my iphone 5 but i can`t activate it because the first time was actived whith the old icloud account! what i can do now ??
-
Different WHERE clause condition
Guys, What the below statement denotes ? sd.account_type_key = act.account_type_key() what is mean by () ?
-
UIX related JDev question.
Hello, I am currently using the printable facet in some of my applications. I was wondering if their was way to create a facet that would ressemble the printable facet, but with all the chrome and some functionnalities. Basically I would like to crea