SOLAR_EVAL - Test- Project Status Analyses question
We have set up our test plans with the option 'with transactions' and deselected 'with released documents'.
However when we pull reports in project status analyses we are not receiving all the transactions in the results...why is that? Is there a way to capture all transactions?
Hi Daniel,
What is your current release level ?
Regards
Valdecir
Similar Messages
-
Searching for a Project status = CLSD and open purchase orders?
Hi,
I am searching for a project status (Project Builder CJ20N) which allowed my to set a CLSD or a simillar status for settlement with open purchase orders.
This staus should allowed to process with open orders BUT not allowed to add new orders after setting this status.
Have somebody any idee? Or it is impossible?
Tahnk you in advanced for your Help.
Regards BaldyHi TV-kid,
while I was waiting for an answer I got to the same conclusion, so what you offers me is quite tempting actually.
I got a look to your website and it seems convincing. Still though, your case studies are in other business area, It's only a mater of good knowledge of File Maker.
I did download the test-drive last version of File Maker plus their samll Business Solution. I did read most of the documentation and the learning process would be too long to construct ourself a good crossed-data base.
I'd like to get in contact with you to look for a possible colaboration. to get private, I'd liketo do it through your contact link in your website .
To whom shall I write?
Thanks
Cheers
Cheers -
Project Status Report in MS Power Point
Hi Experts!
I am very new to Project Systems. Our requirement is to create a Project Status Report. This report should be generated in MS Power Point which should be editable.
Do we have any standard reports or test reports for the same? Can someone give some pointers for the same? Your help is highly appreciable.
Thanks a lot.Try convincing your client saying that this is absolutely not possible in standard SAP. However also let the client know about other alternative stating that standard SAP reports can be downloaded to Excel which then can be used as a reference to create a power point presentation. This, though, can be done manually only.
-
Getting Error in Asmx Web Service Unit Testing & not able to debug unit-test Project.
I am getting below error message while running unit test for ASMX web service
Failed MyFunction The ASP.NET Web application at 'D:\MyProjectFolder' is already configured for testing by another test run. Only one test run at a time can run
tests in ASP.NET. If there are no other test runs using this Web application, ensure that the Web.config file does not contain an httpModule named HostAdapter.
I checked in web.config. Below line already added in web.config. i removed below line to run test again but getting same error message.
<httpModules>
<add name="HostAdapter" type="Microsoft.VisualStudio.TestTools.HostAdapter.Web.HttpModule, Microsoft.VisualStudio.QualityTools.HostAdapters.ASPNETAdapter, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</httpModules>
i am not able to debug unit test project.
Please "Mark as Answer" if this post answered your question. :)
Kalpesh Chhatrala | Software Developer | Rajkot | India
Kalpesh 's Blog
VFP Form to C#, Vb.Net Conversion UtilityHi Kalpesh,
>>Failed MyFunction The ASP.NET Web application at 'D:\MyProjectFolder' is already configured for testing by another test run. Only one test run at a
time can run tests in ASP.NET. If there are no other test runs using this Web application, ensure that the Web.config file does not contain an httpModule named HostAdapter.
In your web application root, can you find a file named 'web.config.backup'?
Reference:
https://social.msdn.microsoft.com/Forums/en-US/e2ad0c20-df90-48dc-818c-8c5ec24d9365/visual-studio-test-is-not-hitting-breakpoints-in-debug?forum=vststest
Fang also shared more information about debugging the unit test for web project here:
https://social.msdn.microsoft.com/Forums/en-US/daa16086-b1b8-4917-ad8d-65e23b49e1bc/not-able-to-read-webconfig-through-unit-test-feature-by-visual-studiovsts?forum=vststest
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Gantt Chart in Project Status Report
Hi Folks,
We are doing a custom development and creating our own Project Status Report PDF form. Is there a way (standard FM or otherwise) to generate a Gantt chart and show it on the PDF form.
The Gantt chart itself is not of the whole project structure. It is only the phases. Most projects will have 4-5 phases maximum. The Gantt chart also does not need to be too sophisticated, we just need a high level graphical representation of the phase timelines.
Let me know if my question is not clear and I can elaborate.
Thanks
LashanHello Lashan,
Building the Gantt chart in a PDF report is quite tricky. The Gantt chart view you see in cProjects is a different SAP component, JGantt (developed in Java), which is connected to the system.
Adobe forms don't have a standard Gantt element, so you'll have to render it somewhere else and send it to the form in a binary format.
For creating and rendering the graphic you can use the SAP IGS (Internet Graphics Service).
You can find some details here: http://help.sap.com/saphelp_nw04s/helpdata/en/17/86c039c7811f11e10000000a114084/content.htm
This is a little bit more complicated, you also need to use iXML libraries to transform all the Gantt data into the IGS required format.
The end result will not really look like the Gantt view, but it will contain all necessary information:
Is this the kind of graphic you need to develop?
Cheers,
Tudor -
Where do I specify the URL to test for my load testing project?
When we create a WebAndLoadTestProject in VS 2013, the only place where I can specify the URL that I actually want to test is by adding a Web Performance test to the project and specifying the URL in the recording tool.
Does this mean that I cannot have a load test without having a web performance test?
Because I've searched a lot and I don't find any other place where I can specify the URL that I want to test.
And all the blogs that are out there also talk about having both the web performance test and the load test together. I never come across a single one that explains having a load test without a web performance test.
So my question is; Can I or can not I have a load test without a web performance test? If I can, then where do I specify the URL that I want to test against ??A Visual Studio Load Test is a thing that runs other tests, looks after their results and collects some timing data. A load test can run large numbers of other tests to simulate big loads. On its own a load test does not do anything. Load tests are
really good at running Web Performance Tests and collecting their results. Load tests can also run Coded UI tests and unit tests.
The URL used in a Web Test can be derived from a context parameter. The Web Test command "Parameterize Web Servers" can be used to change all the URLs in the requests to context parameters.
Load Tests can also specify context parameters and any values they specify will override the parameter values specified in a Web Test.
Regards
Adrian -
Cannot load project status report in cprojects on portal
Hi,
I have checked all the FP_* adobe test programs and my ADS is working fine. I did test my form in ECC transaction code sfp and the form loads properly.
But, when I try to load the project status report(same form) through portal (cprojects)it is giving me connection timeout error.
Could somebody guide me?
Thanks.Hello,
there can be several reasons why the Statusreport does not come up
a) ACF component is not installed correctly
Check as described in note [766191|https://service.sap.com/sap/support/notes/766191] if the ACF is installed correctly
b) ADS is not set up correctly
Check as described in note [944221|https://service.sap.com/sap/support/notes/944221] if the ADS is installed correctly
c) cProjects config for the status reports is not set up correctly
Check as described in note [978997|https://service.sap.com/sap/support/notes/978997] if your system is set up according to the configuration guide
Best Regards, Andrea
Edited by: Andrea Langlotz on Jun 11, 2008 8:55 AM -
Dear All,
I have recently completed a Implementation project. Now I am getting a project of developing and testing XI for new realeases of XI in SAP Labs. How would this project help me hone my XI skills? Should I rather stick to development projects or Testing projects will also be worthwhile.
Regards,
Ashish
Message was edited by:
Ashish Goyal
Message was edited by:
Ashish Goyal
Message was edited by:
Ashish GoyalAshish,
This is more of a question that is a debate of whther being in a Development Project Vs Maintenance Project Vs Pure Testing projects!
It all boils down to the specifics and the work done on each of these projects.
One of my friends in testing always claims "He can see the End Product as the End user sees it", while people in development claim " Testing is monotonous, it is the same kind of work. Development is more fun" . its alll about perspectives and what you feel good doing at!
Regards
Bhavesh -
Service Status - Filter by test-connection status
I would like the script to skip computers that are not responding to the test-connection status. I have pieced this script together off others on the www. So I do not really know what I am doing. Please assist.
$strCategory = "computer"
$objDomain = New-Object System.DirectoryServices.DirectoryEntry
$objSearcher = New-Object System.DirectoryServices.DirectorySearcher
$objSearcher.SearchRoot = $objDomain
$objSearcher.Filter = ("(objectCategory=$strCategory)")
$colProplist = "name"
foreach ($i in $colPropList){$objSearcher.PropertiesToLoad.Add($i)}
$colResults = $objSearcher.FindAll()
foreach ($objResult in $colResults)
{$objComputer = $objResult.Properties; $objComputer.name}
C:\myscipts\getpcnames.ps1 > "C:\myscripts\Computers.txt"
C:\Users\wgrier\Documents\getpcnames.ps1>"C:\myscripts\Computers.txt"
Get-ContentC:\myscripts\computers.txt|ForEach-Object{
$svr=$_;
Get-Service-NameWSearch-ComputerName$svr}
|Format-tableName,status,machinename-autosize|out-file-filepathC:\results.txt
The Black script works without a issue, my part works but is slow and returns errors on the computers that are not powered on, this is why I am asking for a way to filter the script to only run on the pc's that test-connection .Wayne is your question about Configuration manager 2007? Can you please explain your scenario, it is not clear on what you are trying to achieve from your question. Please clarify so that I can move it to the right forum so that you can get more help.
Thx.
Kerim
This posting is provided "AS IS" with no warranties, and confers no rights. -
How to block project status in CJ20n
Dear All,
I am facing one scenario,and also gone through lots of sap notes and many research work, But did not find the accurate answer to resolve this issue.
My Issue is how to block Project Status in CJ20N like lock and Unlock etc. Because in our organisation if i assign the authorization for Cj20n, then every user got the access of this and they mis use it.
So i want to restrict users at this point . Please guide me through this on early manner.
Early step by step response will be appreciable.Dear Renu,
Your question seems to be confusing. I got a conclusion that either you want to lock/unlock the project or just simple not allowing users to access CJ20N transaction.
For your information. Following is the reply for both queries:-
1. To lock/unlock project, please select project definition and go to Edit>Status>Lock/Unlock-->Master Data.
2. For not allowing every user to access CJ20N, please refer to BASIS guys in your organization.
Please revert me back if you have doubt or If I am thinking in another way.
Many Thanks,
Amit
Edited by: A.Rajoria on Feb 28, 2011 7:43 AM -
Changing Project Status Switch via SE10
We have a problem with tcode SE10.
We created a display role with SE10 to be able to view transport request. However it is possible (when a user is in SE10) to go (via the menu) to edit project. There it is possible change the project status switch. These switches are connected to CHARM and therefor we don't want to have any changes to these switches.
Does anyone have a solution for this. We already tried to analyze a trace file, but it seems that no authorization checks are performed when executing the actions above.
Thanks!thanks for the update. We already checked this.
The user in question is not authorized for the authorisation object S_CTS_ADMI.
The tracefile does not indicate this object as a missing authorisation object to perform the action.
As said before it seems that no authorisation check is performed at all. -
Revision: 13681
Revision: 13681
Author: [email protected]
Date: 2010-01-20 17:50:46 -0800 (Wed, 20 Jan 2010)
Log Message:
Removed build warnings from several test projects.
Modified Paths:
osmf/trunk/apps/samples/plugins/CaptioningSample/.project
osmf/trunk/apps/samples/plugins/MASTSample/.project
osmf/trunk/plugins/CaptioningPluginIntegrationTest/.actionScriptProperties
osmf/trunk/plugins/CaptioningPluginIntegrationTest/.project
osmf/trunk/plugins/CaptioningPluginTest/.actionScriptProperties
osmf/trunk/plugins/CaptioningPluginTest/.project
osmf/trunk/plugins/CaptioningPluginTest/src/CaptioningPluginTest.mxml
osmf/trunk/plugins/MASTPluginIntegrationTest/.actionScriptProperties
osmf/trunk/plugins/MASTPluginIntegrationTest/.project
osmf/trunk/plugins/akamai/AkamaiBasicStreamingPluginIntegrationTest/.actionScriptProperti esI think I addressed all your questions in my original post, but since it ran a bit long, I'll recap....
1. I'll attach screenshots of my report options tab for the first report. The second is the same, with the only change being that it's configured for xml reports.
The temp files were deleted correctly prior to configuring for multiple reports.
2. If the first report is xml and the second is html, both are readable. If the second is xml, the xml report is not readable by a browser, whether the first is html or xml. If the first is also xml, it is apparently over-written by the second xml, which is bad.
3. I'm using a modified version of the instructions from this link to
generate multiple reports.
http://forums.ni.com/t5/NI-TestStand/Create-Two-TS3-5-Reports-XML-and-ATML/td-p/471394
I modified the instructions to work with TestStand 4.1.1. I also
modified it so I would not be changing the default sequence model. I'll attach the modified sequence model.
-Mark
Attachments:
Report_opts1.JPG 65 KB
Report_opts2.JPG 60 KB
SequentialModel_multiReport.seq 33 KB -
Using SQLCMD variables in SQL Server Unit Test Project
Is it possible to use SQLCMD variables in my SQL Server Unit Test Project? In my test initialize script I'd like to set a database name variable, something like this:
:SETVAR MyDatabase "mydatabase"
SELECT * FROM [$(MyDatabase)].[mytable]
but I get syntax errors when I run the test. Any suggestions how I can get this to work.
Result Message: Initialization method
myTest.TestInitialize threw exception. System.Data.SqlClient.SqlException: System.Data.SqlClient.SqlException:
Incorrect syntax near ':'..Hi Kevin,
What is the error?
This should work only thing i could see is no scheme specified.
SQL Server uses dbo as default schema.
In your case:
:SETVAR MyDatabase "mydatabase"
SELECT * FROM [$(MyDatabase)].dbo.[mytable]
Also check your instance collation if its Case sensitive then specify database and table name as exact case.
Example:
:SETVAR MyDatabase "[mydatabase]"
:setvar schemavar "[dbo]"
:setvar tablevar "[mytable]"
SELECT * FROM $(MyDatabase).$(schemavar).$(tablevar) -
Table for WBS project status and budget.
hi,
i am being requested to have a report with project details with the PO and PR.
but i were unable to find the table for the project status (TECO, REL) for a WBS element. may i know want table and what field they were being link?
aside, may i know under what table does the "budget assigned" to a WBS element located at?
thanksHi Ben,
in order to retrieve the status of a WBS element, please select into table JEST by object number (JEST-OBJNR = PRPS-OBJNR). This will give you an internal status code (JEST-STAT). Then go to table TJ02 with this internal code and select field TJ02-TXT04: this will give you the external status code.
For the budget, go to tables COSP and COSS, selecting by object number (OBJNR).
I hope this helps. Best regards,
Alvaro -
Set Project status error Activity 000005012744 0010 No changes possible bec
Hi All,
I am getting this error on RPM "Activity 000005012742 0010: No changes possible because of status CLSD" after setting project status to Complete Technically or Closed. I could not change the status to any other status when set to these two statuses.
I tried looking for custom implementation in the BADIs but unfortunately breakpoint is not triggered on any of the BADIs. Is this a configuration issue?
Thanks and I hope someone can help me.
Renz
Edited by: Jorenz.Llanes on Jul 5, 2011 8:43 AMI found out that the activity of a project should be released first before setting a status to the Project level after which is applied to the project hierarchy.
Maybe you are looking for
-
It is intermittent but it is terrible! It's only a week old!
-
Problem in installing CCB on AIX .
Hello , I am trying to install CCB2.2.0 on AIX5.3. Following are the details: AIX - ($ oslevel -s)--> 5300-07-01-0748 Websphere - 6.1 (Integrated Solutions Console, 6.1.0.0, Build Number: b0620.14 , Build Date: 5/16/06) CCB - 2.2.0 Perl - 5.8.8 C3P0
-
My Aperture Library does not want to open.
Hi Guys, I am trying to Reference my Aperture Library, so that I keep all my RAW (original) files on my external hard drive, and only work on the Version files in Aperture. I am having a BIG problem with it. My Aperture library does not want to ope
-
Dear Friends, I want to write an extension for Adobe Dreamweaver CS3 and also add an autocompletion-feature. Is there a good tutorial for adding autocompletion? I only want to know how to create a popup with custom listed textual content when the use
-
My Safari has been crashing lately. Has something changed?