SOLAR01 - assign message to issue

In SOLAR01, I would want to assign message to issue, however we could not do so, as when we list the message to be assigned, none could be found.
Strangely, this can be done from transaction SOLUTION_MANAGER > Issue Management > Issues.
Anyone encountered this before ?

Hi,
Since your current stack level is unknown, perhaps this note maybe of interest to you, 1162628
Cheers,
SH

Similar Messages

  • WHAT ALL MESSAGE'S ISSUED WHILE CREATING PO

    Sir,
    ply let me know after saving the po i want to know what all messages were issued while creating the po.
    Like "warning" or "information" message
    where  can i see this
    regards
    amey

    Hi,
    PAth- Spro-MM-Purchasing-Environment Data-Define Attributes of System Messages...
    Here are few message type:
    Contract has different purchasing organization &     W
    Validity period of contract does not start until &     W
    Validity period of contract expired on &     W
    Target value of contract & exceeded by & &     W
    Net price for item & taken from conditions     W
    Purchase requisition & item & already deleted     W
    Scheduled quantity & & greater than target quantity & &     W
    Quantity smaller than invoiced quantity &     W
    Target quantity exceeded by  & &     W
    Not possible to determine a consumption account     W
    Release date lies in the past     W
    Base unit of measure & adopted from material master record
    Release date: next workday is &     W
    Contract target value & reached     W
    Please only use plants with company code &
    Order unit copied from material master record     W
    Hope it helps.
    Utsav..

  • Duplicate Message ID issue in case of Multi mapping (without BPM)

    Hi Experts,
    I am doing one sample Example for my requirement of converting the single source message data into the multiple Target messages.
    for example, when sender system is sending the 5 sale order details into a single message in PI then my Inbound proxy class of ECC R/3 receiver system must get this sale orders separately, that means inbound proxy class method must be triggered separately for 5 sale orders from sender system. for achieving this, I have used the Multi mapping concept in ESR (without BPM).
    This scenario is in Asynchronous mode.
    The below screen shots give the details on what I have configures so far.
    IN ESR
    IN ID
    IN SXMB_MONI of PI
    IN SXMB_MONI of ECC R/3 Receiver system (Error in Processing)
    due to this error, inbound Proxy class method is not being triggered for the single Sale order details as well,
    please let me know how to tackle this duplicate message ID issue when we have multiple payloads to process in a single message.
    please also let me know if is there any other workaround to fulfil this requirement.
    Thank you,
    Regards,
    Jagesh

    Hi Nunu,
    Check the below blog for restrictions.
    Multi-Mapping without BPM - Yes, it’s possible!
    Restrictions
    Messages that result from the split in a mapping-based message split are sent using one AE. So only adapters running on the AE are supported. In particular, this means that target IDOC message splits are not supported since the IDOC adapter is not part of the AE.
    Regards,
    Praveen.

  • Errors Message while issuing the material in MB1A i.e unrestricted material

    Hi Expert,
    I want know the Message while issuing the material in MB1A we are getting the error unrestricted material, so what is the reason of error.(i.e there is no stock available or any other give me the reply as soon as possible)
    Regards,
    Ram Rathode

    You are not clear. What is the error message that you get?

  • Assign message number 161 to message class F2

    Hi all,
    Whats tcode to assign message no 161-Vendor & already exists to message class F2-Master Data Maintenance: Customer, Vendor in? Then I will set as Error or Warning at tcode OBA5.
    Really appreciate your help
    Thanks

    HI,
    message maintenance: SE80, tick "edit object" go to "more" enter message class,... But when I view message class F2 message 161 is already there (SAP standard).
    Best regards, Christian

  • 0FI_AP_6 assigning to DSO --Issue

    Hi,
    I have this std Datasource 0FI_AP_6. This when i try to assign to a custom DSO (copy of Std DSO 0FIAP_O06) i am getting infopackage assignment as well which was used in earlier datamodel..
    i do not wan to have old infopackage in the new DSO assignment.
    Even if a new infopackage is automatically assigned then no issues, but the older infopackage has some selections which will simply not work in current new datamodel. and i cannot delete the infopackage as was used else where.
    any ideas?

    Hi,
    Try to create new infopackage as per your requirement
    Regards
    sivaraju

  • Cu 50 Inconsistent characteristic value assignment Message no. C1821

    Dear All
    sorry I come from Taiwan,my English is not well
    I have a question for SAP PP
    I study Make-to Order Production with Variant Configuration
    I read paper Make-to order Quotation Processing with Vaniant Procing(663)
    and In accordance with the file operations
    but when i According to cu50 display an error message：
    Inconsistent characteristic value assignment，Message no. C1821
    creat pland order in tcode co08 display an error message：
    No valid BOM exists
    i choices "no" display an error message：Error or warning occurred during master data transfer
    I do not know how to resolve
    Please help me  thank you very much

    Dear All
    Thank you for your help
    I found the problem
    1.cu50 error message Inconsistent characteristic value assignment，Message no. C1821
    ans: the paper Bast Practices Make-to-Order Quotation Processing with Variant Pricing(663) , page 85
    Dependency name : YI_PC_YI_005_SELE_OPT
    Syntax : $root.YI_004_ADD_OPT='01'
    2.creat pland order in tcode co08 display an error message：No valid BOM exists
    ans :
    a.Tcode cu42 , in BOM application select SD01 for Production-General
    b. IMG OPL8 BOM Application sele SD01

  • Messages were issued when costs were calculated (see log)

    Hi,
    When I am creating the production order ( T Code: co08 , MTO scenarios  and with reference to sale  order ) but i am getting these error messge.Error when calculating costs see log like:
    Messages were issued when costs were calculated (see log)
    Message no. CK262
    and also iam not getting planned cost .in the production order i saw log worning message like
    Object was not costed
    Message no. CK060
    Diagnosis
    The system could not find any entries that are relevant to costing.
    System Response
    The system did not cost the object.
    Procedure
    Check whether the following objects should be flagged as relevant to costing:
    o     Items in the BOM
    Display BOM
    o     Operations in the routing
    o     Control key in the routing
    1. Look at the message log.
    2. Check whether a quantity was specified in the confirmation.
    pls give me clarification ASAP
    Regards
    SAPCO

    Hi Hisapgaru,
    The error on product costing can be cause by several message which can be caused by poor master data maintenance. It does not mean, the error are found on every message line, you have to analyze the material number that involve in the message using the information provided by log message (procedure).
    To analyze product costing in a comprehensive way is by using CK11N. By this t-code you can display the product cost result from 3 pespective: Cost element, costed BOM or cost component.
    You can event check the product costing parameter from this CK11N/CK13N(display product costing). Without doing analysa to product costing, you cannot point out what cause the problem.
    Solve the problem from product cost planning side first, then after calculation free of error, you can go back to production order activity.
    Best regards,
    Irhasni

  • Wrong assign messages in the collector logs

    Hi,
    Does anyone know what causes this type of errors to show up in the vCenterDC_Errors.log file for the embedded data collector?
    2014-04-02T08:01:23.180-0400 ERROR [(32) HostsClustersAndVMTemplatesInventorySyncJob on VC 528] [propertyContent.PropertyContent] 7657: wrong assign : path=customValue[304], value=com.vmware.vim.CustomFieldStringValue@c6125d47 
    2014-04-02T08:04:12.968-0400 ERROR [(32) HostsClustersAndVMTemplatesInventorySyncJob on VC 528] [propertyContent.PropertyContent] 7445: wrong assign : path=customValue[304], value=com.vmware.vim.CustomFieldStringValue@64b6f789 
    2014-04-02T08:22:52.488-0400 ERROR [(32) HostsClustersAndVMTemplatesInventorySyncJob on VC 528] [propertyContent.PropertyContent] 6965: wrong assign : path=customValue[304], value=com.vmware.vim.CustomFieldStringValue@cae4c46a 
    2014-04-02T08:27:23.475-0400 ERROR [(32) HostsClustersAndVMTemplatesInventorySyncJob on VC 528] [propertyContent.PropertyContent] 7952: wrong assign : path=customValue[304], value=com.vmware.vim.CustomFieldStringValue@d33a1a8b 
    Cheers,
    Milos

    Hi Lakshmi,
    I suspected as much, but it is great to have it confirmed.
    We have been having some issues with the stats collection jobs failing and turning the status of the collector to down, so I was trying to wade through the voluminous  logs and noticed these ERROR messages occurring regularly. One less thing to look into now
    Thanks.
    Cheers,
    Milos

  • Assigned message tones do not play

    8707g
    The assigned tone for the messages folder plays. I disabled this as I thought it may be over-riding the tone set for emails and SMS but still they do not play. Am I to assume you cannot hear different tones for SMS and email folders?
    I have asked this question on two other forums without any solutions to my problem so maybe members here know more.
    I just wish I could sort this matter out with BB direct as the handset is only 5 days old and still no fix.
    Solved!
    Go to Solution.

    hmm ok..
    go to the profile icons and click on it, you should see here loud, vibrate etc..
    scroll down until u see advanced and click on that.
    highlight the profile u want to change and press the menu button (one with the dots on it) and then select edit.
     Here u will see different things, like messages (with ur email accounts beside them) and mms and further down SMS text.
    Highlight one and press it, then change the tone u want to hear for when u get a text message in the 'out of holster' part.
    this should do it..
    Hello from Perth!! Hope ur not getting affected by the floods..
    If your issue is resolved, put a checkmark in the green box that contains the resolution.
    OR
    If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
    ~Gday from Down Under~

  • Redraw / message-pump issues

    I am trying to solve a persistent issue in which I can't get the Flex UI to redraw in an acceptably-timely manner.
    My application consists of groups of asynchronous tasks that execute in a specific order and post status in-between each task -- pretty simple.  A javascript application layer posts the status updates to a simple Flex UI.
    In my Flex UI, callback handlers display status text by assigning the status-text strings to a member variable that is bound to a text control.
    In 99% of the cases, this works perfectly -- but for one particular set of status events, strings are being posted to the bound data-member, but the text control is seemingly never redrawn.
    Here's an example set of events:
    1: Receiving request data ...
    2: Processing contents ...
         [several-second pause here]
    3: Sending response ...
    4: Response data sent.
    Instead of the above, I see this on the screen:
    1: Receiving request data ...
         [pause happens here instead]
    4: Response data sent.
    I put logging statements in and all the messages (1-4) are getting posted to the bound member variable in the right order.  (The timing also shows that the pause comes AFTER the second message -- as it should -- so the issue isn't just that lines 2 and 3 are being displayed too quickly for the eye to catch them.)
    My first instinct was to set Javascript timers between each status update to give the Flex UI time to redraw.  I did that -- for every state change, no less -- and got exactly the same behavior.  I also tried explicitly invalidating the text control after each status update.  Also with no success.
    The only thing that DOES work is to put a JavaScript "confirm()" call before setting the setTimeout() timers after each status is posted.  Then, the Flex UI appears to refresh immediately -- but I have to click through the confirm() dialog, so that's obviously not acceptable.
    So for those of you that made it this far into my explanation: Thank you!  My question is:
    Is there some esoteric Flex-message-pumping rule I'm unaware of here that's preventing my text control from being redrawn in some instances?
    And if not, is there a way to force a text control to redraw itself?
    Any help is greatly appreciated.

    In one of my projects i have encountered a problem that flash doesn't process server response until user moves mouse over it.
    SWF was embeded in wmode transparent. Also there was JavaScript interaction. The only way was to solve this problem was remove transparent wmode.
    >> Is there some esoteric Flex-message-pumping rule
    >> I'm unaware of here that's preventing my text control
    >> from being redrawn in some instances?
    No.
    >> And if not, is there a way to force a text control to redraw itself?
    myControl.invalidateProperties();
    myControl.validateNow();

  • Cost Center assign Profit Center Issues

    Hi Controlling Expert,
    i have one issues regarding, Cost Center assign to Profit Center
    wht happened , we have made MIS Report Thru Report Painter KE80, we have map based on   Primary Cost Element, at the time of Business Transaction, we have capture the Finance Cost center i.e FI000, Marketing Cost center i.e MK000 , HR Cost Center i,e HR000 and assign the same cost  center FI000 to Profit Center i.e FI000 also same name, respectively. in MIS report there is two Head  i.e Sustaining Cost and Development Cost ,where we have to capture only Cost center  for Sustaining Cost related  to display i.e FI000, MK000 and HR000. KE80 report belongs to Profit Center wise you can see the Report. But same FI000, MK000 and HR000 also updated related with business transaction and capture above cost center like in depreciation  GL Amount 1000 cost center FI000 and sustaining cost also updated the same amount 1000 because we have assign FI000, i.e wrong . last 3 months post the amount now wht should I do for not updated sustaining cost, as I understand , should be delete sustaining Cost as well Development, and later on we can take report from KSB1 for FI000, MK000 and HR000, for management purpose, so if I cannot assign profit center FI000 to Cost Center .kindly correct me whether ryt or wrong. Coz Fianance, HR cost and marketing is only cost center. not suppose to assigh profit center, in this case how Profit Center removed from Cost center. kindly let me knw, or give me other option.
    wen we see the report same Profit Center showing two times along with amount i.e wrong coz of Sustaining Cost we have assign Profit Center
    in this report particulars are Below
    Revenue  : Relevant GL ( At time of Business Transaction we have captured the Relevant Profit Center i.e Finished Product i.e R100: RA Tube
    and RA Tube R100 assign with same Cost Center R100.
    B.Material Cost : Relevant Primary Cost Element
    Manpower      : same like Above
    2.Energy            : same like Above
    3.Consumption   : same Like Above
    Conversion Cost (1+2+3)
    Sustaining Cost   : Here we have given Profit Center i.e FI000, MK000 and HR000 these profit center assign 
    Development Cost : Here we have given profit Cente EN000
    Profit      (A-B-C-D-E-F)
    G.Depreciation : Relevant Primary  Primary Cost Element
    Financing Cost : Relevant Primary Cost Element
    I. Other Income/Loss : Relevant Primary Cost Element
    PBT : (F-G-H-I)
    Kind regards
    Pranav Kr. Gupta
    SAP FICO Consultant.

    Hi Pranav
    You are logging same issue twice. I didnt see any difference in the two threads though.
    If its the same issue, request you not to repeat this in future.
    KE80 report two times value effected
    Regards
    Mustafa

  • LiveCache - LC10 message - Index issue

    hi,
    LiveCache - LC10, - Problem Analysis ->Performance -> Database Analyser -> bottleneck report
    The message read as follows:
    LiveCache- Bottle-neck messages:
    2 tables contain > 1.000.000 records but only 20.000 rows will be sampled for statistics.
    Table SAPR3./SAPAPO/ORDKEY contains 8247892 rows(205921 pages), sample rows 20000
    Table SAPR3./SAPAPO/STOCKANC contains 1319385 rows(25413 pages), sample rows 20000
    Looks this would affect the processing and the delay may be an issue for CIF queue processing.
    Wondering, if sampling could be increased ? is there any oss note available to do this.  This index is implemented using BADI
    Any input on this issue is appreciated.
    Thanks,
    RajS

    Please check the following notes regarding changing the sample of the statistics run:
    Note 808060 - Changing the estimated values for Update Statistics
    Note 927882 - FAQ: SAP MaxDB Update Statistics
    Kind regards,
    Mark

  • Dependent Message Choice Issue, Please Help.

    Hi All,
    I am new to OAF.
    I am desiging  dependent message choice where there are 4 message choice boxes
    I have written the code but the issue i Am facing is when i select a value from the first Mesage Choice , processFormRequest Method is not called.If I click on any lob in the page , then only processFormRequest() is called and value is populated in the second drop down.
    So I need to call processFormRequest() after a value is selected in Message Choice..
    Pleas help

    Hi,
    Follow the steps in this link. In this they have used MessageTextInput. You do the firePartialAction in MessageChoice.
    https://blogs.oracle.com/prajkumar/entry/partial_page_rendering_in_oaf
    Then write the following code in processFormRequest and modify as per your requirement.
    if ("update".equals(pageContext.getParameter(EVENT_PARAM)))  //update is the event name of the MessageChoice item
    if (pageContext.getParameter("ApplicationChoice") != null)
    ownerName1 = pageContext.getParameter("ApplicationChoice");
    System.out.println("Application value :" + ownerName1);
    Serializable ownernameParam[] = { ownerName1 };
    am1.invokeMethod("setQueueName", ownernameParam);
    System.out.println("After calling the queueName function");
    //Code in AM
    public void setQueueName(String queuename)
    SeaSoaQMsgidNameVOImpl vo1 = getSeaSoaQMsgidNameVO1();
    vo1.setWhereClause("OWNER = :1");
    vo1.setWhereClauseParam(0,queuename);
    vo1.executeQuery();
    I hope this will help you..
    Thanks and Regards,
    Myvizhi

  • IOS 8.1 Photos and/or Messages cursor issue

    I select a photo within the Photos app on my iPhone 5s or my iPad2
    Then click the little 'share arrow' and choose Messages app as the sharing method
    The photo selected does show up in the Messages 'message composition' window
    However the cursor, instead of being to the right of "To:" shows up to the left of "To:".  Happens every time.
    Submitted to Apple as a bug however I am open to ideas to fix the issue.

    I just replied on a similar thread. I also have this issue. When I either compose a new message or text a photo, my cursor is to the left of the "To:" field, but types in the appropriate area and sends without problems. It doesn't seem to affect texting capabilities, but it is annoying that the cursor is not perfectly aligned after the "To:" field.
    I tried quitting the text application by swiping out of range, and resetting my device but to no avail. I called Apple Support and am expecting a call back from them in a few hours, when it is more convenient for me to have them try to isolate the problem.
    It appears that others are having the same issue. It seems that whenever a new software update is downloaded, more problems or problems where there were none occur.

Maybe you are looking for