Solar01 "Message no. SOLAR_DOC020" The document cannot be edited

Hi!
I am configuring the business processes via SOLAR01 and receive the error "The document cannot be edited" Message no. SOLAR_DOC020.
It is also not possible to load the templates.
<b>Has anyone experience by solving this problem or some useful SAP note?</b>
Thank you very much!
regards

Hi!
I think it does not connection with the GUI version, because I cannot edit the Word-documents in the transaction SOLAR01.
I can edit .txt-files, but I cannot edit the .doc-documentas.
I have SAP GUI 7.10
Thank you!

Similar Messages

Message no. SOLAR_DOC021: The document cannot be displayed

Hi All,
When I am trying to display a document attached to a roadmap, (by double-clicking on it or by clicking the display button) I get the following Error Message: SOLAR_DOC021: "The document cannot be displayed"
As adittional information the roadmap is customer specific, The document has not been checked out and we are working on SP16.
Any hint?
Thanks,
Miguel

Hi,
Some possibilities;
could it be that you are using Sapgui 7.10 with Patchlevel 0?
(i mean no patch applied, just the initial release)
Unfortunately there was a bug in the intial release of Sapgui 7.10
(Patchlevel 0), which was solved with patch 1 for Sapgui 7.10.
The problem was that the access to the windows registry failed using
function from CL_GUI_FRONTEND_SERVICES.
But this is needed for opening documents, as the application looks into
the windows registry to determine which fronted application should
be started for displaying/editing the document.
Could you please install Patch >= 1 for Sapgui 7.10 and check whether
the problem is resolved afterwards?
note: #1023083 Registry functions did not work
Hope this helps.
Cheers,
sh

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, Mark

Unfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

SOLAR02 The document cannot be changed

Hello,
I have developed a program that uploads files massively to Solution Manager, and the upload process works fine.
But when i try to edit a document that i uploaded using this program, the systems shows me this popup message.
The document cannot be changed.
Because:
it was copied from a template.
it was copied from the Business Process
Repository.
it is saved in a different context.
The document is flagged for copying, e.g.
because you are in a copied project.
<ZH>It has been copied.</>
The reference to the original document is
replaced by a reference to the copy.
Has anybody seen this before or why is this message being showed.
Kind regards
Jon
Edited by: Jon Azkorra on Dec 17, 2011 2:09 PM
Edited by: Jon Azkorra on Dec 17, 2011 2:15 PM
Edited by: Jon Azkorra on Dec 17, 2011 4:30 PM

Hi Rajat,
Sorry for the delay, I was out of office.
If you really wish to switch off this protection you can use report SM_FOLDER_NO_REFCOPY. Please see note 1236369 for details
In your case you would need to add the 'Technical Folder Name' SOLAR00 using the report Start report SM_FOLDER_NO_REFCOPY At 'Technical Folder Name' enter SOLAR00 and press the add button this inserts a new entry in table IWBSETTING. You should find in this table afterwards and entry with NAME = SM_FOLDER_NO_REFCOPY and VALUE = SOLAR00
Afterwards when you try to change the documents (or their attributes) from within the implementaion project the document should not be copied anymore
But please ba aware of the fact when using this that as of then the original document in the template can be changed from within every project type.
bets regards,
Fabrcius

I am trying to delete an XLS file from a network drive and am getting a message that says the file cannot be deleted because it is in use. I can't see where it is in use and have tried to reboot the computer to no avail.

I am trying to delete an XLS file from a network drive and am getting a message that says the file cannot be deleted because it is in use. I can't see where it is in use and have tried to reboot the computer to no avail. I can delete other files but several XLS files are giving me this message.

You said it was a network drive. So is someone else on the network using that same file or may have have left with excel still accessing it on their system?

I keep getting an error message that says "the ipod cannot not be synced""an unknown error occured (13019).

I keep getting an error message that says "the ipod cannot not be synced""an unknown error occured (13019). I am trying to put albums on to my ipod by dragging and dropping. I have it set to manually manage music and videos. The albums appear in the music section under Devices, but they don't appear on my actual ipod.
I have never had any problems doing this before, only in the last few days.

I am having the exact same issue as you are with my iPod nano. This started happening the same day after I updated the iPod software, so I wonder if it is a bug within the software that Apple needs to resolve. I dragged 3 playlists of new music from my iTunes over to my iPod and sometime while it was trying to add those songs, the error 13019 popped up. Another note, which may not be related at all, was that iTunes told me at some point during this process (I believe before the error notification, but I'm not sure and that may be helpful to know) that I did not have enough room on the iPod to copy all of the songs, but it would copy as many as it could. What is curious, like in your situation, is now all the songs it supposedly copied appear to be on the iPod under the Device->iPod->Music label in iTunes when it is plugged into my computer, the playlists in question are also showing up there, and it does indeed say my memory is full under the iPod's general tab in iTunes. However, when going through my actual iPod when it is not plugged in, none of those songs or playlists are anywhere to be found.
Anyways, all the established solutions to the 13019 error do not apply to this situation, as my iPod has always been set to manually managed so "unchecking" the Sync Music option under the Music tab of the iPod and rechecking it will not work because it was never checked in the first place. And voice memos are obviously not applicable since we are not talking about an iPhone failing to sync music.
Unless anyone can provide a new solution here, I may just have to take my computer and iPod up to the genius bar. Any suggestions would be appreciated.

When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

Got prompt "the location of the document cannot be determined" then presentation GONE!

I'm freaking out! I hope someone can help.
I started getting the prompt "the location of the document cannot be determined" as well as asking me where the movie "VIBCPart1" was, which I thought was odd, as that was the name of the presention - not a movie file. Then Keynote froze - that is, I couldn't save anything and it making me force quit it, and I did.
When I went back to open it the entire preso was just gone - not in the folder at ALL. I did a search - nothing. I do have a duplicate for a backup but I did 12 hours of work on this project today - and I use Backblaze so Time Machine was turned off. And yep, there is some kind of problem with Backblaze! I await their response at this point.
I have a lot of videos in my Keynotes - I often split my presentations up into smaller parts because of that to avoid huge files. I suspect this one got big. In any case, if anyone has any ideas on recovery and how to avoid in the future, I'd be very grateful! Thank you in advance!

Only lately this started to happen to me as well. Problem happens in all iWork applications. Fortunately the apps never locked up completely.
When I try to save a document, I get the dialog that the location could no be found and whether I want to Save As... When doing a Save As the original file is still there and the dialog prompts for overwrite permission. I could save my documents. Just the other day Keynote magically found the document location again when I cancelled the dialog and then right clicked on the document title. The path to the document is correctly listed. I clicked the enclosing folder name on the popup (which did not open, resp. the Finder did not come to front), but a subsequent Save (command-S) worked
Very strange and deeply troubling.
Another observation: after it happended some days ago I ran Disk Utiltiy Verify and it found some problems, which I repaired successfully. Just now I had the very same issue again and right away ran a disk verify. AGAIN issues with the disk (Incorrect block cound for a file, volume bitmap needs minor repair for orphaned bocks, invalid volume free block count). Could this be SSD related (MBP Retina with 750GB original Apple SSD)?
Edit: some typos corrected

When I try to open a picture in iphoto a message tells me the file cannot be found. How do I find the file?

When I try to open a picture in iphoto a message tells me the file cannot be found. How do I find the file? It does not happen with all the pictures.

Is you library a "referenced" or "managed" library:
That message is generated when a library is a "referenced" library and the location of the files have been moved from where they were when originally imported into iPhoto.
Are the photos that this is happening to in the same Event(s)?
What system are your running? Where is your library located? How much free space do you have on your boot drive?
OT

It says The Document Cannot Be Printed No Pages have been selected to print

How come when I try to print a PDF file it takes a long time to flatten and then says "The Document Cannot Be Printed" and then "No Pages have been selected to print"

What is your operating system? Reader version?

I just downloaded the newest update for mountain lion. After downloading and restarting for installation, I got a message stating that the update cannot be installed due to an error. Yet when I check I have version 10..8.3 and safari version

I just downloaded the newest update for mountain lion. After downloading any restarting for installation, I got a message stating that the update cannot be installed due to an error. Yet when I check I have version 10..8.3 and safari version 6.0.3, which the update was for. Does this mean that the update is iinstalled and the message was incorrect?

Brian Gallagher wrote:
I just bought the Imac on Monday, which was placed on the shelf on Saturday. Its now Thursday and I have to update the machine. Heck I haven't even bought the printer or the new desk for all this stuff....ha ha.
Good timing! Oh well, at least you shouldn't have to update again for a while. It will be nice kickstarting your Mac with the very latest System Update knowing any hiccups from 10.8.2 would have been ironed out if they were going to affect your workflow at all.
Cheers and Happy Computing
Pete

How can I stop Firefox 4 from displaying "The document cannot change while Printing or in Print Preview" from appearing every time I click on File/Page Preview?

Clicking on File/Page Preview in Firefox 4 brings up a warning dialog "The document cannot change while Printing or in Print Preview" every time. How can I stop this from happening? It is very annoying, and it is necessary to click "OK" on this dialog twice before it will go away. Thank you.

Does it behave that way in [[Safe Mode]] ?
If it doesn't, then one of your add-ons in the culprit.

I'm trying to sync and back-up my iPad2. I keep getting an error message (1140) saying, "The iPad cannot be synced. An unknown error occured." What on earth is that all about?

I’m trying to sync and back-up my iPad2. I keep getting an error message (1140) saying, “The iPad cannot be synced. An unknown error occured.” What on earth is that all about?

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

P6R8.4 Professional : The Document cannot be launched. Please check the P6 server configuration.

I have used the mobile phone TM APP to upload pictures ， but i get a error when i lanunch the file, "The Document cannot be launched. Please check the P6 server configuration." Please tell me what I'm doing wrong, or direct me to a document that might help. "
Thanks ,
Kping

I have not do anything but the error changed just now , what should I do ?
Thanks ,
Kping

I tried to instal 10.8.3 to my MBP and it crashed. I then tried to restore from Time machine but when it is about 50% through a message comes up "the files cannot be restored"

I tried to instal 10.8.3 to my MBP and it crashed. I then tried to restore from Time machine but when it is about 50% through a message comes up "the files cannot be restored" Can anyone help me to get out of this mess?

Back up all data.
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

Solar01 "Message no. SOLAR_DOC020" The document cannot be edited

Similar Messages

Maybe you are looking for