SOLAR01: Problem when entering the same T-Code twice

Hi all,
I am encountering a problem with Solution Manager 4.0, transaction SOLAR01.
When entering the same transaction code twice (in the Transactions tab) for a particular Business Process, I get the following error message:
"The specified key already exists"
Therefore, unless I flag the object for deletion (by selecting the row and choosing the "Delete Row" option), I am not able to proceed further.
Has anybody else encountered this problem and is there a proper workaround?
Thank you,
Orestis

Hi Jason,
Thank you for your post.
The reason for entering the same transaction twice is to test the sequence of the business process.
So, for a specific system integration scenario, I may need to create a customer in one transaction and return to that same transaction later to modify the customer (this is just an example). As one transaction may be used for different tasks at different points in time, I would like to reflect that sequence in the Solution Manager.
Kindly advise if you believe this is not the correct approach or if Solution Manager does not support this kind of "sequencing".
Thanks for your support!
Orestis

Similar Messages

Problem when executing the same subVI in parallel.

Hey!
I have created a subVI that I am using in two applications that executes in parallel. For some reason the applications is using the same instance of the subVI, which creates conflicts when the applications are trying to use the same subVI at the same time. Is it possible to solve this problem?
/Jakob

Open the SubVI and go to File>>VI Properties. Select Execution and check "Make VI reentrant". This should solve your problem. You should read more about reentant VIs and how they work in the site. They have different kind of uses.
Try to take over the world!

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4) A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4)
A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

Sounds kind of stupid, but check to make sure that your iphone case cover is not blocking the edge of the camera lens. I had a silicone case on my 3S and when it got older, it started tot slip and the edges of my pictures were blurred.

I have disabled my new ipad touch by entering the wrong pass code to many times. How can i fix this problem?

I have disabled my new ipad by entering the wrong pass code to many times. How do i fix this problem?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I forgot to turn off the FIND MY iPhone appplication before i reset up the phone, Now it's asking me to verify with apple or icloud ID but when i entered the same ID which was registered as apple ID, It says INCORRECT. It's been already 03 days

I have forgotten to turn off the FIND MY iPhone appplication before i reset up the phone, Now it's asking me to verify with apple or icloud ID but when i entered the same ID which was registered with itune & icloud, It says INCORRECT. It's been already 03 days, I am asking help with apple care centre, UAE, Head qurter, UK, USA but they are just sending me a link to reset up which still doesn't work. I am really dissapointed that i have wasted my 700 US dollar. Is it true that i can't use anymore this iPhone if i can't unlock? or there is any one to help in Dubai, Since i am staying in Dubai. I had called Dubai authorised care cantre. They asked my apple serial & IMEI number, They said ' the serial number is based on USA support but i bought in retail shop in UAE, They are also helpless. I am really unhappy with Apple sevice what they provide the customer. If it's so complicated the i wouldnt buy iPhone. Why they can't reset up my iphone like new mobile using their software. Please help me if anyone of you have solution for this. I am really sad that i wasted 700 USD. Can someone help me??

Thank you Chris for your concern. But It doesnt go through.
I tried through iForget,
01.
Select your authentication method.
Email authentication: To access your information, we will send an email to the address(es) on file for you.
Answer security questions: To access your information, you will need to answer the security question(s) provided when you originally created your Apple ID.
02.
Email has been sent.
When you receive your sign in information, follow the directions in the email to reset your password.
But
I m not receiving any authentication email even it says that email has been sent, & trtied to verify my birth date & all then it says
Password Reset
Your Apple ID password has been reset.
Return to My Apple ID
After all, I am just putting the same id & password, It says INCORRECT.
"Is it my problem is not clear to you all? Please help me. Thank you!
Regards
Sujan

I just brought a apple protection plan as my phone warranty is going to end in a day, when i am trying to enter the protection plan code and my phone serial no its showing an error message try after some time is there any solution to that?

i just brought a apple protection plan as my phone warranty is going to end in a day, after entering the protection plan code and my phone serial no its showing an error message "technical error try after some time", is there any solution for that?
As i need the warranty to extend for another year please help me regarding this issue.
When i bought a new iphone5 in Inda after using it for three days lock button was not working properly and it was warranty claimed and exchanged from apple service center in India, for the same phone I want to extend the warranty but its showing a error message is there any solution?

Here is some information on the applecare +:
http://www.apple.com/support/products/iphone.html
It appears that you have to buy the applecare within 30 days of buying your phone - you said that your phone warranty is almost over, so when did you buy it??? That could be the explanation for the error.

How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first

Please help!!
How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first installation?

Thank you for your answers, it helps me a lot.
But sorry for my ignorance. I understand how you mean it, but I don't know how to do it. I'm scared to lose the settings/edits of the images.

I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6 Please see spec

I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW025, DW050 ... WARNING: DW024, DW025 ..., please advice me the step to re-install the Pro-X. Thanks

Please follow Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
Do let us know if it worked.
Regards
Rajshree

HT4061 Recently I upladed the iOS and I have set a password, but when I entered the same it's now given as the "iPad is disabled"

Recently I upladed the iOS and I have set a password, but when I entered the same it's now given as the "iPad is disabled"

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Just purchased a 3rd generation iPad and cannot connect to house wifi. It keeps searching for a connection but the gear wheel just keeps on turning. The wi-fi spot is listed and I entered the security WEP code. I connected a Macbook without problems.

Just purchased a 3rd generation iPad and tried to go thru the startup and connect to the house wi-fi. Found the house wi-fi among the listings and was prompted to enter the WEP security code. Gear wheel just keeps on turning and a connection is never established. I have tried this 4 times with the same results. A desktop computer is connected and I easily connected a Macbook without any issues. Suggestions would be greatly appreciated.

Try Settings, select the network name, click on the blue arrow to Forget This Network and try signing in again.

Getting error in KO01 when entering the Settlement rule

Hi All,
In KO01, I am trying to create a internal order and a settlement rule. I enter settlement reciever as another Internal order of anothe co. code. Then, when i change the status to Release I get this error message
Settlement Rec. Obj. co. code is different. Pls use an object in the same co. code as this IO
Message no. DB000
This message clearly says to change the reciever to the same co. code. But, i was able to give a different internal order of anothe co. code and settle to it in SAP 4.6C
Now, in ECC 6.0, it isnt allowing but at the same time, when the settlement reciever is a cost centre of a different co. code, it doesnt error.
Can you please let me know ur thoughts on this.
Thanks
Ameet

Hi,
Can you tell me did you activate cross company settings in your client for settlement of one CO object from one company code to another.
Best Regards,
Ravi Reddy

I cannot use the Lion up-to-date program! I bought my MBP on June 8 and when entering the serial number says ineligible! Thanks!

Thats the deal, i am a qualifiyng user for the Up To Date Program, and when entering the serial number of my MBP it says i am ineligible. I already tried with the form that had to be filled up if the direct method didn`t work and it has the same issue. My only possible explanation is that it seems they recently added a date limit for the submission of an order to get Lion free (July 19), which makes me be very disappointed with Apple because in the first communication about the up to date program they listed: "Customers who purchase a qualifying Mac between June 6, 2011 and the date when Lion is available in the Mac App Store will have 30 days from Lion’s official release date to make a request" .
Please help me, I am from Chile and my sister bought the MBP to me by the Apple Online Store, so I can`t personally go to an Apple Store to explain my problem.
THANKS!

Muchas Gracias!
Pero dejame hacerte otra pregunta... No entiendo porque sale ahora lo de "submit before july 19th" si es que en un principio dijeron que uno tenia 30 dias desde que saliera Lion para los que compraran despues del 6 de Junio. Esa es mi gran angustia en verdad, no me importa esperar, pero me daria mucha rabia haber perdido la oportunidad de descargarlo gratis. Tu llenaste alguna orden o algo similar antes del 19 de Julio? Yo no hice nada parecido, sin embargo cuando me meto a la parte de la garantia con mi serial number me sale que mi MBP esta activo y registrado y todo.
Disculpa las molestias, y nuevamente muchisimas gracias!
P.D: No puedo llamar a Apple porque aca en Chile no esta la Apple Store oficial, es un "authorized reseller" y se llama MACONLINE, asi que no se si ellos me puedan ayudar.

HT1212 My iPad locked after 1 incorrect passcode entry and I tried what a senior advisor told my to do, but it could not download the info unless I entered the correct pass code, which I can not do since it does not give me the opportunity.

My iPad locked after 1 incorrect passcode entry and I tried what a senior advisor told my to do, but it could not download the info unless I entered the correct pass code, which I can not do since it does not give me the opportunity. How do I get the window to enter my pass code?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

User Exit For VA01 To Restrict From Entering The Same Material twice

Hello All,
I have a requirement that in sales order creation(VA01) i want to restrict From entering the same material
more than once in a sales order i.e more than one same material not allowed in sales order i have tried alot of user exists but of no use
can u tell me the exact user exit
Regard's,
Mahesh Dasari

Hi Mahesh Dasari,
1.This user exit is used to add additional datat to VBAP struture like custom fields. And this user exit is called for every single line item when processed.Say you have 10 items then this user exit will be triggered before each entry is populated in the XVBAP.
2.When the user enters item 10 with material 1 we allow him, then for the next line item say 20 we check if the material entered or processed ( this will be available in VBAP structure ) is available in XVBAP and the line item 10 is not deleted.
3. If the above check true then it means that the material entered is already existing else its not so it will proceed to next line item
e.g. in your question , item 10- Mat1 , item-20- Mat12, item-90-Mat1,
Then as per the code I have given , item 90 will be deleted or removed.
4. Now you can either delete the line item by clearing VBAP as I have done or give a error message that will be as per your requirement.
Use the logic I have provided in my earlier post , and see the behaviour.
Hope you find this answer helpful and set this questions answerd
Regards
Arun Thiyagarajan

MM STO between Plants under the same company code

Hi experts,
Please guide on the configuration steps for doing STO between Plants unders the same company code.
We have company code 100 in that Plants A B & C are theie. Each Plant can do STO to other Plant.
How to configure this scenario?

Dear,
Please follow bellow path
1. Create a vendor for the Company code of the receiving plant using account group 0007 via T-Code XK01.
2. In the purchasing data view assign the supplying plant and the schema group
3. Create customer with the sales area of the vendor.
4. The shipping conditions, the delivering plant and the transportation zone determine the route in the STO.
5. In the pricing procedure determination relevant to the STO assign document pricing procedure and customer pricing procedure to get the pricing in the invoice.
6. Maintain condition records for pricing condition.
7. Maintain carrier as a partner in the customer master.
8. In OMGN select the supplying plant and assign the company code and sales area. Similarly select the receiving plant and assign the company code and sales area (The company code to which the plant is assigned to).
9. Assign the delivery type and checking rule to the document type.
10. And finally, assign the purchasing document type to the supplying plant and the receiving plant.
11. Create the STO using T-Code ME 21N and save.
12. Check for release strategy if any and release using T-Code ME 28.
13. Create delivery in background using VL10G.
14. If delivery is created, it is an indication of correct configuration and master data creation.
Stock transfer between two plants in different company codes is known as inter company stock transfer.
Material should be maintained in both supplying and receiving plant MM01
Stock should maintain only in supplying plant MB1C
Create receiving plant as a customer in supplying plants company code and sales area XD01
Assign this customer number in receiving plant details OMGN
Assign supplying sales area in supplying plant details OMGN
Assign delivery type NB for in combination of supplying/ receiving plants.
Create STO ME21N
As it is normal there in the item details we should get shipping date i.e. customer number
Go for Delivery VL10B
Shipping point *****
Select PO go for execute
then select the delivery then go for delvy ............create delvy,,,, delvy number generated.
Goods Issue VL02
Delvy doc **********
Click on picking
enter the picking qty
Click on PGI
in the mean time check in the PO history you will get the details
Goods receipt MIGO
Stock transfers that include deliveries and billing documents/invoices are only possible between plants belonging to different company codes.
If you want to carry out a cross-company-code stock transport order with delivery but without a billing document, you must set the Relevant for Billing (data element FKREL) indicator in Customizing of the item type to "blank" (Not relevant for billing).
The following applications are involved in this type of stock transfer:
? Purchasing (MM-PUR) in entering the order
? Shipping (LE-SHP) in making the delivery from the issuing plant
? Billing (SD-BIL) in creating the billing document for the delivery
? Inventory Management (MM-IM) at goods receipt in the receiving plant
Invoice Verification (MM-IV) at invoice receipt in the receiving
Transfer of goods from one location to another location, it may be between plants within the same company code or in different company code's plants.
within the company code, but plants,
receiving plant will raise the STO in Supplying/issuing plant-ME21n,
Supplying plant will deliver the goods to receiving plants ,
then we need to pick n post the Goods Issue-VL02n,
now when we can observe that the STO qty will be added into receiving plant and reduced in Delivering plant,
To do this, we need do prior customization in SPRO-IMG,-
material should be created in both plants( receiving & Supplying)
-maintain the stock only in supplying plant
-create a dummy customer in supplying plant's sales area(if u have one sales area, create in tat comp code n sales area)
-assign this customer number to receiving plant's details along with the sales area,
-Assign the STO doc type(UB) to Supplying plant, along with checking rule
-Assign the Del type (NL/NLCC) to Supplying n receiving plant.
Stock Transport Order:
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b911d43ad11d189410000e829fbbd/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b917843ad11d189410000e829fbbd/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b918543ad11d189410000e829fbbd/content.htm
u can also use the SAP building block
with delivery
http://help.sap.com/bestpractices/BBLibrary/html/P36_IntStockTransDel_EN_IN.htm
without delivery
http://help.sap.com/bestpractices/BBLibrary/html/P38_IntStockTransWithoutDel_EN_IN.htm
Regards,
Mahesh Wagh

SOLAR01: Problem when entering the same T-Code twice

Similar Messages

Maybe you are looking for