Solaris 10 (10 1/06 ) Hang on install

I am installing Solaris 10 (for intel) on my HP DL 350 G4 server.(As far as I can tell I meet the requirements from Sun's Hardware Compatibility List). On CD 1 I receive the following:
"using RPC Bootparams for network configuration information." ( then it hangs forever)
I downloade the ISO Images (4 cd's) from the sun site for Solaris x64/x86 (Solaris 10 1/06 Operating System). I unziped those files and burned through Roxio. While burning I used the option "Record disc from image".
How do I fix this problem?
Thank you for your help in advance!
Deraviyam

HP dosen't support 350 g4 on solairs. Try removing any addon nics or disablling the embedded nics until the installation is done.

Similar Messages

  • Adobe AIR installation issue - hangs at "Installing..."

    Hello everyone!
    I know questions similar to this have been asked many times before, but I did not manage to find the solution to my problem after a few hours of reading and trying the various 'solutions' around the net and this forum. I apologise if I missed it.
    I cannot seem to install Adobe AIR. I run a freshly downloaded installation executable, but it hangs at "Installing..." and 0% progress for a very, very, very long time, if I let it. This last try has been going for 45 minutes as I write. The only way to get out of the installer is through Task Manager and killing the service, as hitting 'Cancel' just makes the installer attempt to cancel endlessly.
    I tried installing it in safe mode but there it gives an error saying I may not have administrative permissions (which I do have);
    I created a new user account;
    I "run as Administrator" and am using an account with administrative rights;
    I tried it through the command line with putting the file in c:\ and running "AdobeAIRInstaller.exe -silent" without quotes from c:\;
    I have shut off all my antivirus software;
    I tried downloading it with a different browser;
    I tried using the MicrosoftFixit.ProgramInstallUninstall, and took Adobe AIR off the list;
    I tried uninstalling all Adobe products and then reinstalling them, with Adobe AIR last
    ... and some more things, but none of this has helped. Here's what the installation log generates when it hangs:
    [2012-12-25:01:16:36] Runtime Installer begin with version 3.5.0.880 on Windows 7 x86
    [2012-12-25:01:16:36] Commandline is:
    [2012-12-25:01:16:36] No installed runtime detected
    [2012-12-25:01:16:40] Relaunching with elevation
    [2012-12-25:01:16:40] Launching subprocess with commandline c:\users\terri\appdata\local\temp\air7b85.tmp\adobe air installer.exe -ei
    [2012-12-25:01:16:40] Runtime Installer begin with version 3.5.0.880 on Windows 7 x86
    [2012-12-25:01:16:40] Commandline is: -stdio \\.\pipe\AIR_7668_0 -ei
    [2012-12-25:01:16:40] No installed runtime detected
    I would much appreciate any help or advice anyone can give me regarding this! This is starting to drive me nuts.
    Thank you.
    ( also, this is my first post, so please forgive if I've done anything wrong or not according to etiquette! )

    Ok, I understand.  So before we continue, we really need to figure out what the exact error is.  Can you, on at least 2 systems, generate the MSI logs we'll need?  Here's a document that explains how to enable logging and where to find the logs once they've been created:
    How to enable Windows logging
    Once you've enabled logging, try installing again.  Grab the newly created msi logs and either post here or email me at [email protected]  I'll examine the logs and see if we can find a common issue between the systems.
    Thanks,
    Chris

  • 64 bit OEL install hangs at installing dogtail in OVM 2.2

    I recently upgraded my server to OVM 2.2 and swapped out the dual core AMDs to quad core AMDs at the same time.
    Since then I have been unable to create any 64 bit OEL servers. In every instance the install hangs when Installing dogtail-0.6.1-2.el5.noarch
    This used to work at 2.1.5 and I can deploy the existing templates, but they are OEL 5.3.
    VM-Server Specs
    [root@vm-server ~]# uname -a
    Linux vm-server 2.6.18-128.2.1.4.9.el5xen #1 SMP Fri Oct 9 14:57:31 EDT 2009 i686 athlon i386 GNU/Linux
    [root@vm-server ~]# lspci
    00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
    00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3)
    00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3)
    00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
    00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
    00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
    00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
    00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
    00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
    00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
    00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
    00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
    00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
    00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
    00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
    00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
    00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
    00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
    00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
    00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
    00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
    00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
    01:06.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
    01:07.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
    03:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07)
    03:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07)
    06:00.0 RAID bus controller: Silicon Image, Inc. Unknown device 0242 (rev 01)

    2 new updates
    1) I get the same errors when trying a command line install
    2) I can successfully create fully virtualised VMs
    So if all else fails I can create fully virtualised VMs and then convert them, which is a bit of a pain but will at least give me working templates.

  • Solaris 10 x86 Won't Startup After Install - system just restarts itself?

    Ok, I'm another one of those wacky Vista people. I have a Dell Latitude D630 running a dual boot scenario with Vista Ultimate and Solaris 10.
    I had plenty of issues getting that working but it does work. Vista WILL boot. Solaris won't boot. Solaris failsafe will boot.
    Now the issue is....
    Solaris will not boot. When I select it from the GRUB menu, I see some text that flashes really quickly before the system restarts. It's the same text that I see when I boot failsafe mode.
    Something to the effect of Sun Solaris.... blah blah....Subject To License Terms and Conditions....
    So it's as if it's trying to boot Solaris, but for some reason it just restarts the system. The only thing that works is failsafe mode and Vista.
    How can I troubleshoot this issue when I can only get in failsafe?
    Please note I'm an IT professional (so I'm quite capable) but I have ZERO Solaris experience and limited (very limited) Linux experience so break it down for me if you will.
    Thank you in advance!
    SPECIFIC DETAILS:
    *1. Solaris 10 x86 Platform*
    *2. Windows Vista Ultimate*
    *3. Dell Latitude D630 Notebook, 2GHz Intel Core 2 Duo, 2GB RAM*
    *4. (1) HDD with a Vista and Solaris partition*
    *5. I have tried installing Solaris 10 (3) times to resolve. To no avail.*
    *7. Failsafe mode does boot.*
    *8. Grub looks like this:*
    kernel /platform/i86pc/multiboot
    modul /platform/i86pc/boot_archive
    Edited by: derrickonline on May 13, 2008 4:53 PM
    Edited by: derrickonline on May 13, 2008 4:57 PM

    I should have searched the forums first. This was the solution to my issue....
    http://forum.java.sun.com/thread.jspa?messageID=10249826

  • My iMac hangs when installing Yosemite.

    My iMac hangs when "installing on HD about 22 mins remaining" I did not check to see if this iMac can support Yosemite. What do I do now?

    You can try using the full offline Reader installer from
    http://get.adobe.com/reader/enterprise/

  • Hang while installing OS X Mavericks

    Hi, my MacBook Air is currently hanging while installing OS X Mavericks. I got stuck after the installer asked me about my iCloud account, which I forgot, so I clicked 'Forgot Password'. It's been showing a gray loading screen ever since. I tried to restart it a couple of times but it won't, and my laptop won't even shut down. I close my computer and then the startup comes up again, I put in password, but it's the same gray loading screen.
    I'd like to reload the installation, or at least get to access my computer files. What do I do? Any help is appreciated. Thanks.

    Nevermind! It managed to shut down after a while. Whew!

  • Tecra S1 Hangs when installing XP

    Hi,
    I have a weird problem. My Tecra S1 'hangs' when installing a 'normal' Windows XP Pro (instead of using the 'image DVD). The installation works fine up till the last 9 minutes...then it 'hangs', and the laptop stops working. Only possible solution is then to take out the battery & cut the power. Had a (1 time) similar problem of 'hanging' when using the image DVD
    Somebody who had this before ???
    Thanks a lot for all your hints & tips...

    Hej guys,
    Thanks a lot for the suggestions, and indeed, I also tried other CD's of XP pro...all with the same result. At the last 9 seconds it hangs & the only thing I can do is take out the battery. Last thing I tried was installing a Win2000 pro & that works fine. Then I tried to upgrade that version, but again...it stopped at the last 9 seconds.... :-((, so perhaps indeed I have to look in the direction of the memory problem ???

  • Installing ad-hoc application hangs on installing

    I have developed an iPad application, and added a friend to my provisioning profile and rebuilt my application.  I then sent him the .ipa and he has dropped it into his itunes application, and he can see the icon on his home screen but it just hangs on "installing".
    Any ideas?  Also, he said that the icon doesn't show in his iTunes but it does show in the organizer when i archived the application.
    Any help is greatly appreciated.

    xnav wrote:
    ...I'll bet there is a console message.
    Argh... thanks, xnav!  I feel silly, not to have seen that.. never needed it before, lol
    Plenty of info being generated there.  Also, I offloaded my app launch setup code to a separate method call and now TestFlight registers the launch too.
    Apparently a nib is having problems loading... loads no problem when I run it from xcode! 
    Ther pertinent message: <Error>: *** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Could not load NIB in bundle: 'NSBundle </var/mobile/Applications/64836972-248C-470C-91D3-3F4D76F1621B/r Evolution 2012.app> (loaded)' with name 'RootViewController''
    At least I now exactly where to look now, thanks!

  • LOB apps hanging on install from Company Portal

    Hi,
    We're having issues with LOB (.appx) app installs from the Company Portal.  We're strictly using Intune for LOB app deployment to Win8.1 Enterprise devices.  When users attempt to install a LOB app, it just hangs at installing.  We've tried
    stopping the Intune service, rebooting, even quitting the Company Portal app, but nothing will either kickstart the install or stop it so they can try again.
    If there are multiple requests for the same app via the Company Portal (say 100-200) at around the same time, will the installs be done on a staggered basis, and it's just a matter of timing?
    I appreciate any insight here.

    As you seem not to have an answer for this. From my experience with Windows devices, if an app hangs on install, it has failed but not realised it. It may be something like a config file where it does not understand or is unable to process what to do and
    is unable to skip the step.
    I would normally suggest a local test as admin but cannot advise with appx unfortunately.
    Hope that helps.

  • Oracle DB Configuration Assistant hangs (9i install on Solaris 8)

    Attempting to install 9i database (9.0.1) on Solaris 8 on Sparcstation 20. Goes OK until it gets to the Oracle Configuration Assistant. During the "Creating and Starting Oracle instance" phase, it gets to 50% and just stays there. I left it over the weekend (ie, about 60 hours) and still at 50%. The checkmark is still flashing in the Assistant UI, but obviously nothing is happening.
    So.. my questions are:
    1. I can abort the Assistant. How would I start it manually later?
    2. Has anyone seen this and remedied it?
    3. How can I determine what went wrong?
    4. How can I tell what may have gone wrong in the install process that might cause Oracle to fail to install?
    Thanks for your help!

    What is the server hardware configuration???
    Maybe if you have less memory it's happen: 60 hours it's a very long time but you can try to install only the software and then that the installation is finished you can create the database with the database configuration assistant.
    Try and say something.
    Good Luck.
    Daniele

  • SOLARIS HANG ON INSTALL

    I recently received a Sun Micosystems Solaris 10 DVD. I followed the installation instructions that are online. There was no problems until the installation process. Halfway through the installation window diseapeared. i waited for 20 minutes and then restarted my computer. If i boot from the Hard Drive i get a "bad PBR sig" and if i boot from the disc i get to the loading secound stage. then the highlight what you want to boot. Then it just says all rights reserved SunMicrosystems 1987-2006.
    Can someone please help me.
    you can call me at 316-708-6139
    or Email me at [email protected]

    Need more info here.
    What sort of Hardware are you using ?
    Is it SUN Machines or PC based Intel ?
    Check the site below for Hardware Compatibility List
    http://www.sun.com/bigadmin/hcl/

  • Solaris 10 X86 11/06 Hangs on GUI Login Screen

    1) Solaris X86 11/06 installed on a Intel Core 2 Duo,S975XBX
    10GB Partitioned for Solaris
    20GB Partitioned for Linux
    2) menu.lst edited to add support for Linux (To ensure linux boot options are not missed. )
    Thanks to the article
    http://www.sun.com/bigadmin/features/articles/multiboot_laptop.html
    3) Installation went Fine. The Grub allows me choose between Solaris , Solaris faile safe and Linux.
    4) Boot Linux [Things are fine]
    5) Boot Solaris
    After sometime GUI login screen appears,
    Mouse is enabled
    On any key press to input login id
    System hangs.
    Any help?

    I installed Solaris 10 on my x86 machine once. Worked fine, but it wouldnt apply any changes i made. Then, whenever i told it to shutdown, it just logged me off. I installed it again and it wouldnt let me login as root for first time, i double checked password when i set it. Then, i got into a nostalgia mood and installed Solaris 9 on exact same machine, hard drive etc etc. Same fault. Whats happening? Is a good spec machine according 2 HCL (is custom built)

  • Multiple Safari hangs after installing Snow Leopard

    I had 5 Safari hangs today within hours...never had one since I bought the machine in June 2009 with Leopard installed...Since the SL upgrade CD, I have had 2 system freezes that result in a complete shutdown to clear and multiple Safari hangs that I able to recover with a force quit..My daughter in college with the same machine reported that she had 3 system freezes in one day since SL...My wife who did NOT yet install the SL upgrade and is now blissfully having no problems at all and does not want to install the new OS (again same machine type, We bought 3of them in June after the announcement). I hope that this gets debugged and fixes provided...

    Hi,
    Mac OS X 10.5: What you can do if Safari quits unexpectedly
    That links is for 10.5 but the trouble shooting will work in 10.6 also.
    For system freezes try maintenance.
    Maintaining Mac OS X
    On the Macs you upgraded to SL, did you check to see if you had 3rd party software installed that might not be compatible? http://support.apple.com/kb/HT3258
    Did you repair permissions after the upgrade?
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Carolyn

  • Deploy vid SDM/J2EE hanged while Installing NW04 EP6 SR1

    Hi,
    I am installing NW04 EP6 SR1 installation on Windows 2003
    After starting SAPInst the installation hangs at Deploy vid SDM/J2EE
    at the log shows: PHASE 2006-11-15 17:07:39
    Deploying SDAs (using SDM and SAP Java EE Engine).
    But not going further from this stage, I tried restarting the Installation and even the J2EE and whole system too and no luck.
    Please help me out to over come this issue, I have checked the SAPinst.log and is as followsL
    NFO 2006-11-15 17:07:35
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
    INFO 2006-11-15 17:07:35
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
    INFO 2006-11-15 17:07:37
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html.
    INFO 2006-11-15 17:07:37
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html.
    INFO 2006-11-15 17:07:37
    Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\summary.2.html.
    PHASE 2006-11-15 17:07:37
    Prepare the installation program.
    INFO 2006-11-15 17:07:38
    Installation start: Wednesday, 15 November 2006, 17:07:32; installation directory: C:\Program Files\sapinst_instdir\NW04\EP\EP; product to be installed: SAP NetWeaver '04 SR1> NetWeaver Components Running on Java> Portal Platform> Portal Installation
    INFO 2006-11-15 17:07:39
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html.
    INFO 2006-11-15 17:07:39
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html.
    INFO 2006-11-15 17:07:39
    Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\summary.3.html.
    PHASE 2006-11-15 17:07:39
    Deploying SDAs (using SDM and SAP Java EE Engine).
    SAPinst_dev.log********* has the following error and I just found it
    Current access token
    ====================
    Could not get thread token. Last error: 1008. I assume that no thread token exists.
    Got process token.
    Privileges:
      Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
      Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
      Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
      Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
      Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
      Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
      Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
      Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
      Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
      Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
      Privilege SeUndockPrivilege, display name: Remove computer from docking station, not enabled.
      Privilege SeSecurityPrivilege, display name: Manage auditing and security log, not enabled.
      Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
      Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, not enabled.
      Privilege SeManageVolumePrivilege, display name: Perform volume maintenance tasks, not enabled.
      Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
      Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
      Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
      Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
      Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
      Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
      Privilege SeCreatePagefilePrivilege, display name: Create a pagefile, not enabled.
    Groups:
    Group count: 11
      \LOCAL S-1-2-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      BUILTIN\Administrators S-1-5-32-544 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_OWNER
      \Everyone S-1-1-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      BUILTIN\Users S-1-5-32-545 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      WATEST\Domain Users S-1-5-21-1442379584-1386351650-2746699151-513 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\INTERACTIVE S-1-5-4 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      VMTST050\ORA_DBA S-1-5-21-632969146-1124751804-835223308-1011 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\Authenticated Users S-1-5-11 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\REMOTE INTERACTIVE LOGON S-1-5-14 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      \ S-1-5-5-0-2480400 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_LOGON_ID
      NT AUTHORITY\This Organization S-1-5-15 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
    TRACE      [syxxsyshlp.cpp:185]
               syslib::logSystemState()
    System information
    ==================
    OS version, host name: Microsoft Windows NT [Version 5.2.3790 Service Pack 1] VMTST050
    RAM size (MB): 3583.45
    Swap size (MB): 10687.5
    Please help me out to over come this if any one had idea on this.
    Regards
    Narsimha

    Hi Daniel,
    I am very much thankful for your kind reply. I have to check this with the network team. I just posted whole contents of SAPinst_dev.log file can you please have a quick look so that you may have your valuable suggestions for me to over come the issue:
    Regards
    Narsimha
    TRACE      [sapinst.cpp:285]
               CSapInst::initMessaging()
    Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:344]
               CControlFile::getMessageFilePath()
    Running with messages from C:/Program Files/sapinst_instdir/NW04/EP/EP
    TRACE      [sapinst.cpp:306]
               CSapInst::initMessaging()
    This is SAPinst, version 642, build 851600
    compiled on Aug 24 2006, 03:01:15
    TRACE      [sapinst.cpp:311]
               CSapInst::initMessaging()
    Gui connected by user svc_netwvr_inst from host vmtst050
    TRACE      [syxxsyshlp.cpp:175]
               syslib::logSystemState()
    Process environment
    ===================
    Environment Variables
    =====================
       = C:=C:\Program Files\sapinst_instdir\NW04\EP\EP
       = E:=E:\software\MASTERCD\IM_WINDOWS_I386\SAPINST\NT\I386
      ALLUSERSPROFILE = C:\Documents and Settings\All Users
      APPDATA = C:\Documents and Settings\svc_netwvr_inst\Application Data
      CLIENTNAME = WS10345
      ClusterLog = C:\WINNT\Cluster\cluster.log
      CommonProgramFiles = C:\Program Files\Common Files
      COMPUTERNAME = VMTST050
      ComSpec = C:\WINNT\system32\cmd.exe
      FP_NO_HOST_CHECK = NO
      HOMEDRIVE = C:
      HOMEPATH = \Documents and Settings\svc_netwvr_inst
      JAVA_HOME = C:\j2sdk1.4.2_13
      LOGONSERVER =
    VMTST001
      NUMBER_OF_PROCESSORS = 1
      OS = Windows_NT
      Path = E:\oracle\ora92\jre\1.4.2\bin\client;E:\oracle\ora92\jre\1.4.2\bin;E:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\j2sdk1.4.2_13\bin
      PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
      PROCESSOR_ARCHITECTURE = x86
      PROCESSOR_IDENTIFIER = x86 Family 15 Model 4 Stepping 8, GenuineIntel
      PROCESSOR_LEVEL = 15
      PROCESSOR_REVISION = 0408
      ProgramFiles = C:\Program Files
      SAINST_JRE_HOME = C:\j2sdk1.4.2_13\jre\bin
      SAPINST_EXEDIR_CD = E:/software/MASTERCD/IM_WINDOWS_I386/SAPINST/NT/I386
      SESSIONNAME = RDP-Tcp#3
      SystemDrive = C:
      SystemRoot = C:\WINNT
      TEMP = C:\Temp\1
      TMP = C:\Temp\1
      USERDNSDOMAIN = WATEST.WCORP.COM.AU
      USERDOMAIN = WATEST
      USERNAME = svc_netwvr_inst
      USERPROFILE = C:\Documents and Settings\svc_netwvr_inst
      windir = C:\WINNT
    User: WATEST\svc_netwvr_inst, Id: S-1-5-21-1442379584-1386351650-2746699151-39577
    Working directory: C:\Program Files\sapinst_instdir\NW04\EP\EP
    Current access token
    ====================
    Could not get thread token. Last error: 1008. I assume that no thread token exists.
    Got process token.
    Privileges:
      Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
      Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
      Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
      Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
      Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
      Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
      Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
      Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
      Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
      Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
      Privilege SeUndockPrivilege, display name: Remove computer from docking station, not enabled.
      Privilege SeSecurityPrivilege, display name: Manage auditing and security log, not enabled.
      Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
      Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, not enabled.
      Privilege SeManageVolumePrivilege, display name: Perform volume maintenance tasks, not enabled.
      Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
      Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
      Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
      Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
      Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
      Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
      Privilege SeCreatePagefilePrivilege, display name: Create a pagefile, not enabled.
    Groups:
    Group count: 11
      \LOCAL S-1-2-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      BUILTIN\Administrators S-1-5-32-544 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_OWNER
      \Everyone S-1-1-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      BUILTIN\Users S-1-5-32-545 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      WATEST\Domain Users S-1-5-21-1442379584-1386351650-2746699151-513 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\INTERACTIVE S-1-5-4 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      VMTST050\ORA_DBA S-1-5-21-632969146-1124751804-835223308-1011 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\Authenticated Users S-1-5-11 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\REMOTE INTERACTIVE LOGON S-1-5-14 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      \ S-1-5-5-0-2480400 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_LOGON_ID
      NT AUTHORITY\This Organization S-1-5-15 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
    TRACE      [syxxsyshlp.cpp:185]
               syslib::logSystemState()
    System information
    ==================
    OS version, host name: Microsoft Windows NT [Version 5.2.3790 Service Pack 1] VMTST050
    RAM size (MB): 3583.45
    Swap size (MB): 10687.5
    TRACE      [iaxxclientacceptor.cpp:124]
               CClientAcceptor::acceptImpl()
    Running with control file E:/software/MASTERCD/IM_WINDOWS_I386/SAPINST/NT/I386/PATCOL640/WEBAS630/IND/control.xml version 642 and changelist 15172
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:142]
               CControlFile::getKeydbControlFileName()
    Running with keydb file keydb.xml
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:235]
               CControlFile::getDialogControlFileName()
    Running with dialog control file dialog.xml
    TRACE      [iaxxccontrolfile.cpp:184]
               CControlFile::getResourecFileName()
    Running with resource file C:/Program Files/sapinst_instdir/NW04/EP/EP/helppool.xml
    INFO       2006-11-15 17:07:35 [syxxcfile.cpp:402]
               CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
    INFO       2006-11-15 17:07:35 [syxxcfile.cpp:523]
               CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
    TRACE      [iaxxclib.cpp:165]
               load()
    Opened iaccdlib.dll
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE      [iaxxclib.cpp:165]
               load()
    Opened iamodos.dll
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    INFO       2006-11-15 17:07:37 [syxxcfile.cpp:402]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html.
    INFO       2006-11-15 17:07:37 [syxxcfile.cpp:523]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html.
    INFO       2006-11-15 17:07:37 [synxcpath.cpp:834]
               CSyPath::createFile()
    Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\summary.2.html.
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    PHASE      2006-11-15 17:07:37 [iaxxcwalker.cpp:416]
               CDomWalker::printPhaseInfo()
    Prepare the installation program.
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    INFO       2006-11-15 17:07:38 [iaxxcwalker.cpp:59]
               CDomWalker::walk()
    Installation start: Wednesday, 15 November 2006, 17:07:32; installation directory: C:\Program Files\sapinst_instdir\NW04\EP\EP; product to be installed: SAP NetWeaver '04 SR1> NetWeaver Components Running on Java> Portal Platform> Portal Installation
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component EP_DQE_DB_CONTENT|ind|ind|ind|EP60|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component EP_DQE_SERVICE|ind|ind|ind|EP60|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component EP_DQE_EAR_INSTALLATION|ind|ind|ind|EP60|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component startStopGenericWithoutDialogs|ind|ind|ind|ind|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component startStopGenericWithoutDialogs2|ind|ind|ind|ind|ind; available: 1; required: 0
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component EP_INSTALL_CM|ind|ind|ind|ind|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component startStopGenericWithoutDialogs|ind|ind|ind|ind|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component DEPLOY_CM_PAR_FILES|ind|ind|ind|ind|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component EP_INSTALL_***|ind|ind|ind|EP60|ind; available: 1; required: 0
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    INFO       2006-11-15 17:07:39 [syxxcfile.cpp:402]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html.
    INFO       2006-11-15 17:07:39 [syxxcfile.cpp:523]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html.
    INFO       2006-11-15 17:07:39 [synxcpath.cpp:834]
               CSyPath::createFile()
    Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\summary.3.html.
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    PHASE      2006-11-15 17:07:39 [iaxxcwalker.cpp:416]
               CDomWalker::printPhaseInfo()
    Deploying SDAs (using SDM and SAP Java EE Engine).
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    INFO       2006-11-15 17:07:39 [syxxcfile.cpp:402]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.2.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.2.xml.
    INFO       2006-11-15 17:07:39 [syxxcfile.cpp:523]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.2.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.2.xml.
    INFO       2006-11-15 17:07:39 [synxcpath.cpp:834]
               CSyPath::createFile()
    Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\keydb.2.xml.
    TRACE      [iaxxcwalker.cpp:296]
               CDomWalker::processStep()
    Executing installation step EP_PORTAL_MAIN|ind|ind|ind|EP60|ind|0|EP60|ind|ind|ind|EP60|ind|0|EP_MAIN_SP3|ind|ind|ind|EP60|ind|0|EP_ADAPT_PRT|ind|ind|ind|EP60|ind|0|EP_SET_UME_PROPERTIES|ind|ind|ind|ind|ind|0|updateJ2eeEngineSysProps
    TRACE      [iaxxejsexp.cpp:208]
               EJS_Installer::writeTraceToLogBook()
    EP_SET_UME_PROPERTIES:
          - getCD EP60 = E:/software/netweaver/EP-KMC/PORTAL
          - SDM_HOME = E:\usr\sap/J2E/JC00/SDM
          - j2ee = E:\usr\sap/J2E/JC00/SDM/../j2ee
          - configtoolPath = E:\usr\sap/J2E/JC00/SDM/../j2ee/configtool
          - xml_target = E:\usr\sap/J2E/JC00/SDM/../j2ee/configtool/ume_config.xml
          - xml_source = E:/software/netweaver/EP-KMC\TOOLS/TEMPLATES/ume_config.xml
          - configPropertiesFile = E:\usr\sap/J2E/JC00/SDM/../j2ee/configtool/config.properties

  • Solaris 3/05 no longer boots after installing 113000-07

    I can't get Solaris 10 3/05 to boot anymore after installing patch 113000-7. The patch was installed by Sun's update connection software.
    The computer is a Dell Dimension XPS T600 with 512MB ram.
    I get the error:
    Error 28: Selected item cannot fit into memory.

    I'm not sure how to edit my replies so I'm just gonna make another reply. I assumed the following values:
    GPT 3 Start
    GPT 3 End
    GPT 3 Size
    NTFS Start
    NTFS Offset
    NTFS End
    NTFS Size
    293378384
    293380320
    1936
    294649856
    1936
    490233855
    195584000
    I followed the rest of the instructions given here. I made sure to enter the second number with a + sign. After doing all of that all these checks worked:
    Test 1 - Does Bootcamp Volume show up in Finder?
    Test 2 - Can you see files in Bootcamp Volume?
    Test 3 - Can you select Bootcamp in System Preferences -> Startup Disk?
    I've always been able to access my bootcamp files from finder and I can try to boot from System Preferences -> startup disk, from rEFIt and also from my macbooks startup manager that I access by holding down option while booting.
    I'm starting to think I've misrepresented my problem and that I've been looking at the wrong threads. Every time I try to boot windows I get a black screen with the Windows logo and some text saying something like "starting automatic recovery" or something like that. It then takes me to a blue screen displaying an error number and telling me to use recovery tools on the installation media. Maybe this is different from the problems I've been looking at in other threads.
    I've tried using the same USB I used to install bootcamp with but it doesn't give me the option of repairing the installation.
    EDIT: So I figured out how to edit replies. Anyway I just tried to boot into Windows and checked. The black screen with the Windows logo says "Preparing Automatic Repair". The blue screen gives me the error 0xc00000e.

Maybe you are looking for