Solaris 10 11/06 can't boot if I remove DVDROM

dear all...
I try to install Solaris 10 x86 11/06 on HP Proliant DL140 with SATA HDD but no DVDROM...
I borrow my PC DVDROM and install to my HDD...eveything run fine
but when I remove my DVDROM, solaris can't boot the OS...
may be because configuration change...
Cause when I'm install solaris with DVDROM install the disk became c1d0
but with no DVDROM became c0d0...
I try gooling move solaris disk boot do some stuff like rm /dev/dsk/c* etc... devfsadm...edit /etc/vfstab
in failsafe mode, but still can't boot...
but everything run normal when I install the DVDROM?
how can I boot the solaris without DVDROM install...(change bootdisk from c1d0 toc0d0)
thank you...

Same problem. Left it sitting there for 3 hours
hoping it'd wake up.
Using burned DVD ISO image. Tried it with 2 seperate
burns. Works on another machine (which BTW can't find
any drives - possibly because of the 500G onboard
RAID-0 SATA configuration) and with a burned CD image
as well just to see if there wasn't a problem with
the DVD boot ..
Specs:
Dell precision workstation 410 dual P3-Coppermine
750
512MB RAM
440-BX motherboard
Adaptec aic7890 with:
2x Quantum Atlas 10K 9wls
IX4 onboard IDE controller with:
(Drives 0,1 unassigned)
JLMS DVD-ROM XJ-HD166 (ATAPI)
LG CD-RW CED-8080B (ATAPI)
licon Image 133 ATA controller with:
Maxtor 6Y120L0 ATA drive
en tried taking out the Sil board and disabling the
CD-RW in BIOS
Still waiting :c/Yea, this thing is useless for me. I ordered the free media kit from Sun so I can have an authentic DVD and it never arrived - so I installed Windows XP Professional Edition back on the system.
I even upgraded the RAM from 256 to 512 because I thought it was a memory issue (not enough RAM to start the installation).
Pretty useless until it actually supports more hardware - it's like trying to run MacOSX on a non-Apple system.
I'll check back in a couple years and see if it's usable, cause it isn't ATM. That is quite a shame, too.
- Nate.

Similar Messages

  • Solaris 10 can not boot; disks drive offline

    hi, solaris 10 can not boot the operating system has 10 luns and this enabled the multipathing, he settled patches and reboot the computer does not start showing me the following errors:
    WARNING: /pci@0/pci@0/pci@8/pci@0/pci@1/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875837d,1f (ssd0): drive offline
    WARNING: /pci@0/pci@0/pci@8/pci@0/pci@1/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875837d,1e (ssd3): drive offline
    WARNING: /pci@0/pci@0/pci@8/pci@0/pci@1/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875837d,1d (ssd5): drive offline
    into failsafe mode and slow 2 days in, I try to see the running operating system disk format and takes the response format and shows me the following errors:
    # format
    Searching for disks...WARNING: /pci@0/pci@0/pci@8/pci@0/pci@1/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875837d,1f (ssd0): drive offline
    WARNING: /pci@0/pci@0/pci@8/pci@0/pci@1/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875837d,1e (ssd3): drive offline
    WARNING: /pci@0/pci@0/pci@8/pci@0/pci@1/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875837d,1d (ssd5): drive offline
    hba ports have been connected
    # luxadm -e port
    /devices/pci@0/pci@0/pci@8/pci@0/pci@1/SUNW,qlc@0/fp@0,0:devctl    CONNECTED
    /devices/pci@0/pci@0/pci@8/pci@0/pci@9/SUNW,qlc@0/fp@0,0:devctl    CONNECTED
    # cfgadm -al
    Ap_Id                          Type           Receptacle   Occupant     Condition
    c2                                fc-fabric      connected    configured   unknown
    c2::203400a0b875837d  disk            connected    configured   unknown
    c3                                fc-fabric      connected    configured   unknown
    c3::202400a0b875837d  disk            connected    configured   unknown
    cfgadm -al command output c2 and c3 appears has been connected and configured, because luns in the format output informs me that disks have state drive offline?
    any idea.

    Hi--
    Can you list the steps that lead this problem, please?
    The drive offline message is a symptom of some kind of connection or underlying hardware problem.
    If there were no system changes that lead to this problem, then I would look for connection or hardware issues.
    Thanks, Cindy

  • V240 can't boot: Solaris 10

    Hi all
    I am having trouble booting one of my remote systems via the alom. Three days prior to this issue I successfully booted the machine, did some work on it, and then gracefully shut it down. I am unable to boot the machine now though.
    Here is the error I get:
    {1} ok boot
    Probing system devices
    Probing memory
    ChassisSerialNumber xxxxxx
    Probing I/O buses
    Sun Fire V240, No Keyboard
    Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
    OpenBoot 4.22.33, 4096 MB memory installed, Serial #xxxxxx.
    Ethernet address xxxxxx, Host ID: xxxxxxx.
    Rebooting with command: boot                                         
    Boot device: disk  File and args:
    Boot load failed.
    The file just loaded does not appear to be executable.I have searched on Google and found a few things which I have tried (install bootblock, etc) but it has not solved my problem. Any ideas on how to get this sorted or is it a disk fault?

    Yip, I have tried those. Tried an upgrade install as well...then hit a speed bump;
    ─ Upgrading Solaris Software - Progress     ────────────────────────────────────────
      The Solaris software is now being upgraded on     the system using the profile
      you created. Upgrading Solaris software can take up to 2 hours (may be
      longer on servers) depending on the software you've selected,     the
      reallocation of any space if needed, and the speed of     the network or local
      CD-ROM.
      When Solaris software     is completely upgraded,     the message `Upgrade complete'
      will be displayed.
           0                                                          100
    panic[cpu0]/thread=2a10277fca0: free: freeing free block, dev:0x5500000001, block:22856, ino:326218, fs:/a
    000002a10277f1c0 ufs:real_panic_v+60 (0, 18d7ad0, 2a10277f460, 180c000, 0, 60010db5880)
      %l0-3: 000000007018c078 000000007018c100 000000000180c310 000000007bbb7ce8
      %l4-7: 00000000704faa40 0000060011da5430 0000000000000064 0000000001815000
    000002a10277f270 ufs:ufs_fault_v+c8 (600168a76c0, 18d7ad0, 2a10277f460, 0, 60011d04d28, 180c000)
      %l0-3: 0000000000000000 0000000000022120 000000000187a000 0000000000000000
      %l4-7: 000000000180c000 0000000000000000 0000060011d04c80 0000000000000001
    000002a10277f320 ufs:ufs_fault+1c (600168a76c0, 18d7ad0, 5500000001, 5948, 4fa4a, 600127b60d4)
      %l0-3: 00000600127b6000 0000030003b44158 000002a10277f630 00000000018d7800
      %l4-7: 0000030003b44000 000000000000007b 0000000000000089 0000000000000001
    000002a10277f3d0 ufs:indirtrunc+28c (55c, 30003b3e000, ffffffffffffffff, 0, 10, ffffffffffffffff)
      %l0-3: 0000000000000089 0000000000000010 000006001dfcb260 000000000000008d
      %l4-7: 0000030003b3f570 00000000005c9948 000000000000055c ffffffffffffffff
    000002a10277f4a0 ufs:indirtrunc+248 (3, 30003bbc000, ffffffffffffffff, 1, 10, 0)
      %l0-3: 0000000000000089 0000000000000000 000006001dfca2e0 000000000000008d
      %l4-7: 0000030003bbc00c 00000000005c5da8 0000000000000003 ffffffffffffffff
    000002a10277f570 ufs:ufs_itrunc+690 (600168a4750, 0, 2a10277f7a8, b, 45e0c8, 8d)
      %l0-3: 0000000000000000 000002a10277f6ac 0000000000000001 000002a10277f630
      %l4-7: 0000000000000000 00000600127b6000 ffffffffffffffff 0000000000000010
    000002a10277f800 ufs:ufs_trans_itrunc+19c (600168a4750, 0, 81, 21, 0, 2a10277f8d0)
      %l0-3: 000002a10277f8d8 0000000000000080 000000000000ffbf 0000000000000040
      %l4-7: 0000060011d04cc8 00000600168a4830 0000060011d04c80 00000600127b6000
    000002a10277f8e0 ufs:ufs_delete+3a0 (60011d04c80, 600168a4750, 81a4, 0, 600168a76c0, 1)
      %l0-3: 00000000000081a4 000000000000f000 00000600168a4770 0000000000000000
      %l4-7: 00000600168a4830 0000000000000001 0000000000000000 000000000000f000
    000002a10277f9c0 ufs:ufs_thread_delete+dc (600168a4750, 18d8400, 600168a4750, 2a10277fa70, 60011d04c80, 60011d04cf0)
      %l0-3: 0000060011d04cd0 0000000000000000 00000600168a4750 0000000000000000
      %l4-7: 0000000000000001 00000600168a4750 00000600168a4750 00000600168a4750
    syncing file systems... [2] [2] [2] [2] [2] [2] [2] [2] [2] [2] [2] [2] [2] [2] [2] [2] [2] [2] [2] [2] [2] done (not all i/o completed)
    dumping to /dev/md/dsk/d13, offset 839909376, content: kernel
    100% done: 52724 pages dumped, compression ratio 3.66, dump succeeded
    rebooting...
    Probing system devices
    Probing memory
    ChassisSerialNumber xxxxxx
    Probing I/O buses
    Sun Fire V240, No Keyboard
    Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
    OpenBoot 4.22.33, 4096 MB memory installed, Serial #xxxxx
    Ethernet address xxxxxx, Host ID: xxxxxx
    Rebooting with command: boot                                         
    Boot device: disk  File and args:
    Boot load failed.
    The file just loaded does not appear to be executable.Things seem to be pointing to a faulty disk. When I ran fsck on the two mirrored boot slices I got errors. It eventually fixed them up after running fsck a few times. Still can't boot though.

  • 2 node cluster down and can't boot

    HI,
    Due to power problem my 2 node cluster (both the node) got down all of a sudden abruptly. Now i can not boot any node. Is giving following error:
    Rebooting with command: boot
    Boot device: /pci@1c,600000/scsi@2/disk@0,0:a File and args:
    SunOS Release 5.10 Version Generic_127127-11 64-bit
    Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
    Use is subject to license terms.
    Hardware watchdog enabled
    Jun 25 13:54:55 svc.startd[8]: svc:/system/cluster/cl_boot_check:default: Method "/usr/cluster/lib/svc/method/svc_boot_check start" failed with exit status 1.
    Jun 25 13:54:56 svc.startd[8]: svc:/system/cluster/cl_boot_check:default: Method "/usr/cluster/lib/svc/method/svc_boot_check start" failed with exit status 1.
    Jun 25 13:54:56 svc.startd[8]: svc:/system/cluster/cl_boot_check:default: Method "/usr/cluster/lib/svc/method/svc_boot_check start" failed with exit status 1.
    Jun 25 13:54:56 svc.startd[8]: system/cluster/cl_boot_check:default failed: transitioned to maintenance (see 'svcs -xv' for details)
    Hostname: clnode1
    Requesting System Maintenance Mode
    (See /lib/svc/share/README for more information.)
    Console login service(s) cannot run
    Root password for system maintenance (control-d to bypass):
    Could any one suggest me how to solve this?
    Thanks in advance

    Following is the log file:
    root@clnode1 #
    root@clnode1 #
    root@clnode1 # svcs -l cl_boot_check
    fmri svc:/system/cluster/cl_boot_check:default
    name Sun Cluster boot check
    enabled true
    state maintenance
    next_state none
    state_time Wed Jun 25 15:02:20 2008
    alt_logfile /etc/svc/volatile/system-cluster-cl_boot_check:default.log
    restarter svc:/system/svc/restarter:default
    dependency require_all/none svc:/system/filesystem/usr:default (online)
    root@clnode1 #
    root@clnode1 #
    root@clnode1 #
    root@clnode1 #
    root@clnode1 # cat /etc/svc/volatile/system-cluster-cl_boot_check:default.log
    [ Jun 25 15:02:14 Enabled. ]
    [ Jun 25 15:02:19 Executing start method ("/usr/cluster/lib/svc/method/svc_boot_check start") ]
    /usr/cluster/lib/svc/method/svc_boot_check: svc:/system/cluster/sc_failfast:default: not found
    /usr/cluster/lib/svc/method/svc_boot_check: svc:/system/cluster/rpc-pmf:default: not found
    /usr/cluster/lib/svc/method/svc_boot_check: svc:/system/cluster/sc_ng_zones:default^J^J#^J# The following is the list of services that this script tries to disable^J# when booting a non-global zone in non-cluster mode. While booting in a^J# cluster mode nothing is done to change the state, thereby the following^J# services keeps the same state that it was in before the boot.^J#^JCLUSTER_LOCAL_ZONE_OTHER_SVCS=svc:/system/cluster/sc_restarter:default^J^J^Jif [ ! -f /lib/svc/share/smf_include.sh ]^Jthen^J^I#^J^I# This is an smf service. It should run only on Solaris 10 and above.^J^I#^J^Iexit 0^Jfi^J^J. /lib/svc/share/smf_include.sh^J^J#^J# Get the zone name.^J#^JZONENAME=global^JERROR=0^Jif [  -ne 0 ]; then^J^Iecho Error: not found
    [ Jun 25 15:02:20 Method "start" exited with status 1 ]
    [ Jun 25 15:02:20 Executing start method ("/usr/cluster/lib/svc/method/svc_boot_check start") ]
    /usr/cluster/lib/svc/method/svc_boot_check: svc:/system/cluster/sc_failfast:default: not found
    /usr/cluster/lib/svc/method/svc_boot_check: svc:/system/cluster/rpc-pmf:default: not found
    /usr/cluster/lib/svc/method/svc_boot_check: svc:/system/cluster/sc_ng_zones:default^J^J#^J# The following is the list of services that this script tries to disable^J# when booting a non-global zone in non-cluster mode. While booting in a^J# cluster mode nothing is done to change the state, thereby the following^J# services keeps the same state that it was in before the boot.^J#^JCLUSTER_LOCAL_ZONE_OTHER_SVCS=svc:/system/cluster/sc_restarter:default^J^J^Jif [ ! -f /lib/svc/share/smf_include.sh ]^Jthen^J^I#^J^I# This is an smf service. It should run only on Solaris 10 and above.^J^I#^J^Iexit 0^Jfi^J^J. /lib/svc/share/smf_include.sh^J^J#^J# Get the zone name.^J#^JZONENAME=global^JERROR=0^Jif [  -ne 0 ]; then^J^Iecho Error: not found
    [ Jun 25 15:02:20 Method "start" exited with status 1 ]
    [ Jun 25 15:02:20 Executing start method ("/usr/cluster/lib/svc/method/svc_boot_check start") ]
    /usr/cluster/lib/svc/method/svc_boot_check: svc:/system/cluster/sc_failfast:default: not found
    /usr/cluster/lib/svc/method/svc_boot_check: svc:/system/cluster/rpc-pmf:default: not found
    /usr/cluster/lib/svc/method/svc_boot_check: svc:/system/cluster/sc_ng_zones:default^J^J#^J# The following is the list of services that this script tries to disable^J# when booting a non-global zone in non-cluster mode. While booting in a^J# cluster mode nothing is done to change the state, thereby the following^J# services keeps the same state that it was in before the boot.^J#^JCLUSTER_LOCAL_ZONE_OTHER_SVCS=svc:/system/cluster/sc_restarter:default^J^J^Jif [ ! -f /lib/svc/share/smf_include.sh ]^Jthen^J^I#^J^I# This is an smf service. It should run only on Solaris 10 and above.^J^I#^J^Iexit 0^Jfi^J^J. /lib/svc/share/smf_include.sh^J^J#^J# Get the zone name.^J#^JZONENAME=global^JERROR=0^Jif [  -ne 0 ]; then^J^Iecho Error: not found
    [ Jun 25 15:02:20 Method "start" exited with status 1 ]
    root@clnode1 #
    root@clnode1 #
    root@clnode1 #
    root@clnode1 #
    root@clnode1 #
    root@clnode1 #

  • I can't boot from cdrom at Sparc Enterprise T5120.

    Hello guys.
    I bought junk Sparc Enterprise T5120 at auction.
    It seems to be a good condition. But It can't boot from cdrom.
    When I try to boot, console return bellow.
    After that I wait an hour. But console returns no response.
    {0} ok boot cdrom -s
    Boot device: /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/storage@2/disk@0:f File and args: -s
    SunOS Release 5.11 Version 11.1 64-bit
    Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved.
    WARNING: Last shutdown is later than time on time-of-day chip; check date.
    And date is
    {0} ok date
    03/01/2000 11:10:19 GMT
    So I think it causes because date is wrong.
    But I can't find any information about changing date in ok prompt.
    How should I fix it ?
    P.S.
    IPOM date was also wrong. But I could fix it manually.
    -> show /SP/clock
    /SP/clock
    Targets:
    Properties:
    datetime = Mon Jan 3 08:59:58 2000
    usentpserver = disabled
    -> set clock datetime=112622462013

    Thank you very much.
    Your answer is very helpful.
    I confirmed .version command and get bellow.
    So I guess my t5120 firmware is 7.1.4 or something.
    OpenBoot 4.28.10
    -> version
    SP firmware 2.0.4.23.c
    SP firmware build number: 35029
    SP firmware date: Tue Jul 29 13:26:36 PDT 2008
    SP filesystem version: 0.1.14
    But I also tried latest Solaris 10. And I saw same issue...
    Is this old firmware caused same issue?
    I want to try older version of Solaris 10 or install 7.4.0b firmware. But both of required support contract....

  • I can't boot from instalation disk need help

    can anyone tell me why i can't boot from instalation disk
    i burn a DVD with verified iso with MD5 with Nero Express

    i use burn image , of course and
    i have a Sempron +2400 with asus a7s8x mainboard
    and i download all 5 file for DVD x86 and then i copy /b all this files.
    when computer boot from cd the screen is bleu with Solaris ................ v.20 message and after 1 second message became
    Aolaris ..................v.20 and computer remain in this position

  • Upgraded OBP on Ultra 1 - now can't boot

    Started out wqith an Ultra 1 at OBP 3.5. Upgraded it to Solaris 9. During the install I was offered (but declined) the option to upgrade the firmware to 3.11.
    System booted just fine - very happy.
    Then in an attack of conscience, I decided to revisit the OBP issue. Downloaded patch 104881-08 from sunsolve, followed the instructions and upgraded OBP to 3.33 (current). Install went fine. Ultra-1/Solaris 9 was listed as a supported platform in the documentation.
    Now, however, every time I start the machine, I see this:
    Sun Ultra 1 SBus (UltraSPARC???? 167MHz), No Keyboard
    OpenBoot 3.33, 128 MB memory installed, Serial #9415477.
    Ethernet address 8:0:20:8f:ab:35, Host ID: 808fab35.
    (Notice the ??? after UltraSPARC).
    When I attempt to boot I see this:
    ok boot
    Boot device: disk File and args:
    krtld: load_exec: fail to expand cpu/$CPU
    krtld: error during initial load/link phase
    panic - boot: exitto64 returned from client program
    Program terminated
    ok
    The two seem to suggest to me that OBP 3.33 cannnot properly identify the CPU.
    Now I have a non-bootable machine with no apparently easy way to revert to an earlier OBP. I have the Solaris 9 12/03 media kit but have not figured out how/if I can somehow get to the embedded 3.11 PROM I was offered earlier.
    Has anybody seen this?
    Is it a known issue with OBP 3.33? (I notice it purportedly fixed Bugid 1205113: "dev /SUNW,<a href="mailto:UltraSPARC@0" target="_blank">UltraSPARC@0</a>,0" fails. which looks suspiciously like my problem.)
    Thanks in advance,

    Remember, OBP is OS-independent so the fact you can't boot an OS doesn't mean you can't fix your OBP.
    To do this, you have a couple of options I can think of:
    Option 1. (Easy) If you have a CD-ROM installed on your box, you can unzip and burn the patch onto a CD. Then, from the OBP ok prompt, type:
    boot cdrom /104881-07/flash-update-Ultra1-latest
    Option 2. (Harder) If your shop has an installation or boot server on the network (e.g. a JumpStart installation), you can unzip the patch into that environment, making sure that it's located beneath the directory the Ultra1 would normally boot from. If you've never worked with any of Sun's over-the-net boot/installation tools before, either get some help or get ready for a lengthy (but doable) chunk of work.
    Before attempting this, you will need to make sure of the following:
    a. /etc/ethers has an entry for the MAC address of the machine you're trying to rescue
    e.g. xx:xx:xx:xx:xx:xx some-host-name
    b. some-host-name can be resolved in DNS
    c. /etc/bootparams has an entry for some-machine-name
    e.g. some-machine-name root=<your install server name>:/install-server/Solaris_9/Tools/Boot install=<your install server name>:/install-server boottype=:in rootopts=:rsize=32768
    Note: the above assumes you're not using DHCP to supply the above information. If your shop uses DHCP, then you need to go and consult with the guy who set it up because I've no experience with that part of it.
    Once your install server is set up, you can add the OBP patch to the installation.
    In the example below, I'm using PATCH_TAR to indicate the tarfile you downloaded that contains the OBP patch and assuming your working with Solaris 9.
    cd <install server main directory>
    cd Solaris_9/Tools/Boot/platform/sun4u
    mkdir flash
    cd flash
    tar -xvf PATCH_TAR
    Now, you have a flash update image you can boot from the network like so:
    boot net flash/104881-07/flash-update-Ultra1-latest
    Option 2. is trickier but I know it works because that's what I ended up doing.

  • How can I boot to a fakeRAID -Raid0 set drive from a non-raid hdd

    Hi all,
    First of all, my English is bad and I hope I can explain it what my problem is. Secondly, I need your expert help with my problem right now.
    I'll just layout some hardware information and some history before I start. Currently, my motherboard has 3 hdd controllers which are:
    1) Intel - 6 ports --> contains 2 sets of RAID drives = 2 x 60gb SSD (boot drive) and 2 x 500gb HDD (data drive) both in RAID 0
    2) Jmicron - 2 ports --> 1 port is used by the DVDROM
    3) Marvell - 2 ports --> I don't use these ports as they are slow and are so bad - currently disabled in BIOS
    HISTORY: Before, my 2 x 60gb SSDs (RAID 0) contained Arch 64 + Windows 7 64 with Grub as the main bootloader. I remembered having a hard time setting up intel fakeraid with Arch linux + Win7 dual boot before, but fortunately, with your help, I found the solution and I've been using it ever since until today.
    NOW is kind of a different issue. I bought a new 60gb SSD (just one). I totally reformatted everything with my 2 x 60gb SSD Raid 0 and I decided to just use that exclusively for windows, still in RAID 0. My brand new SSD will ONLY have Arch64 on it. So I installed Windows 7 first on my Raid SSD set. I plugged my new SSD to the Jmicron port so I can take advantage of AHCI. I don't want to mix my new SSD to the Intel Controllers since its not RAID anyway. Anyway, I installed Arch 64 on the new SSD in the JMicron Port fine.
    Now here comes the problem, I set the Jmicron port where the Arch is installed to be the primary boot in the BIOS (since GRUB is there) and I can't boot to Windows! It gives me an error that It can't find the target drive (Win7 in the Raid 0 - intel ports). I've tried modifying the menu.lst and trying so many combinations and It still fails. Of course, I can boot to Arch fine since the drive is independent. It looks like grub legacy can't boot to fakeRaid drives if its not installed on that same drive.
    Can you give me advice on how to fix this issue?
    Also, I was just thinking, is there a 3rd party Windows Bootloader, that can be installed in Raid 0, that can pick up Linux and boot from it. I was thinking of just making the Windows 7 as primary boot in BIOS, with a 3rd party bootloader, then just boot to Arch.
    Thank you!

    Yes, I have redirected my User folder to the D: drive.
    I know that some shared components must reside on the C: drive; that's fine. I just don't have room for the entire installation on there.
    The real issue here is that, when a drive other than C: is selected as the destination, the CS6 package installs into a broken state every time, out of the gate, on my system. Some components get installed to D: and some to C:, but the various components of the programs seem confused about what exists where, as shown below:
    I select a folder on D: as the destination folder for the install, and here is what I get:
    64-bit versions of the package -- Program files are installed to the D: drive as specified, but attempting to start them results in a configuration error message stating that the program must be uninstalled and reinstalled, and lists "Error code: 1".
    32-bit versions of the package -- Program files are installed to the C: drive against what I specified. The shortcuts installed in the Start menu for the 32-bit versions point to the locations where these program files SHOULD be, on the D: drive. If the Adobe folder containing the program files is copied over to the correct location on D:, these programs function normally with no errors.
    I have the 32-bit versions working by copying the program files from C: to D:. I just want to get the 64-bit versions working as well.
    Any help you could give would be greatly appreciated; I'm really looking forward to testing the CS6 suite on my system!

  • Can't boot properly in UEFI mode

    Hi!
    After enabling "windows 8 feature" and booting in uefi only mode, no boot device is detected anymore. The efi shell comes up after the bios has started and I can't boot into windows. I tried a clear cmos but it didn't work. I have a Z87-GD65 (latest 1.11 or 1.1B bios) and my sata devices are a crucial mx100 ssd (with windows 8.1 64-bit), western digital black hdd and asus dvd reader. I'd like to be able to boot in uefi normally. Thanks for your help!

    I think I've found topic for you
    https://forum-en.msi.com/index.php?topic=250729.0;topicseen
    It's about notebook but installation process is actually the same

  • Mac Mini (2011) can't boot, no screen display.

    Hi, my mac mini (2011) finally won't startup today.
    It was since two weeks ago, the mini goes freeze very frequently, I discovered that the fan speed was always below 2000rpm, meantime, the CPU temp was around 80-90 degree, it is around 25 degree in the room, last Friday I installed a software named smcfancontrol, which can manually speed up the fan, and it seems better, and the computer runs faster, I think the CPU is running in full speed.
    Today, I opened a video to watch, after about ten minutes, the computer goes freeze again, and of course I force powered it down by pressing the power button on the back, then the tragic came:
    - when I try to boot up the machine, the front light turns on, then off with a "ka" sounds like the hard drive shutting down(force powering it down)
    - after around two seconds, the light goes on again, and the fan smoothly goes to full speed, there is nothing shows up on screen, as well as no apple boot up sound.
    - I tried to reset smc (power down, unplug power cable, wait 15 seconds, plug in power cable, wait 5 seconds, power on), no luck.
    - I tried to reset pmu (at least internet says it's pmu, it seems apple website did not mention how to reset pmu on mac mini, power down, hold power button for five seconds, power on), no luck
    - I also tried to unplug the memory, try with every single one to boot, no luck
    - last Friday, when I can still boot up the computer, I thought there might too much dust, I removed the fan and cleaned it up, it looks a small piece of plastic on the fan plug were damaged, but the smcfancontrol app still can control its speed, therefore I think the fan is OK.
    - during many retry, there was one time, the fan goes full speed at startup, with no front light off,(my current status is fan goes to full speed gently).
    - the computer is connected with an AV amplifier, then output to a plasma TV, when the computer is powered off, the TV displays a background of amp, when I startup the computer, although no video output from computer, the TV goes to a "No Signal" status, I dont's think this is related to my problem.
    the computer is out of warrentee, but bought only for less than two years... I really want it back to work, can someone help me? many thanks!
    wish you all have a good day.

    Hard to troubleshoot when you can't turn on the computer on any more.  One option is to bring it to an Apple store to have them look at it.  They will tell you what is wrong and how much it will cost to fix.  I have never heard of them charging for a diagnostic and an estimate.
    If your CPU was running hot all the time and your fan had small plastic pieaces, in my opinion, something got fried.  The mini is so compact, that the excessive heat may have also over heated your hard drive causing thd "ka" sound.
    If you decide to continue in to use a Mac Mini as a media server, may I would suggest using iStat to monitor it.  I use iStat on my 2011 Mac Mini Media Server to monitor CPU usage, all sensors, and internet incoming and outcoming.

  • I need help with my Macbook Pro... I can't boot it up because of a Kernal Panic.

    Like the title says... I know there are some computer savy people especially with Macs on here so any help would be greatly appreciated.
    Okay I will try my best to describe my problem...
    I believe it was either Saturday or Sunday that the problem first happened.
    I was watching a video on a site and I don't remember if I expanded to full screen, but the computer like froze up and a dark grey curtain fell over the screen that was somewhat translucent and this message popped up.
    So since it's a 2008 MBP I have no restart button so I decide to hold down the power button until it shuts off and then turn it on again... same message appears... I do this like 3-5 more times and still the same thing.  So I decide to let it sit for a while, which turned into a day because I had to go to work, and while at work I started looking for solutions.
    Came home and tried a solution that work... temporarily... I held the X button upon startup and it worked and I then ran start up disk like it said to on the troubleshooting I learned from Google.  Thought all was well... so I decide to venture back to said site that's just like flash players like youtube, but with more geared towards young adolescences.  Things were good for a little and then the problem started happening again and more frequent.
    I kept doing the hold X thing and it work like 1-2 more times and now that Kernel Panic screen doesn't go away at all and I can't boot up the MBP at all.
    I tried doing the thing where you hold X at start up... no luck!
    I tried holding down shift at start up to boot into safe mode and it still doesn't work.
    I tried some PRAM thing where you hold down cntrl + option + p + r and that didn't work.
    I don't even know what operating system I'm on because the MBP won't boot up for me to see the system info.
    Anyone ever had this problem or know how to fix it... I'm not covered under warranty anymore so before I take it into Apple and the use the KY on me I figured I ask on here to see if anyone can help me remedy this problem.
    Thanks any help would be greatly appreciated!

    Follow these documents.
    http://support.apple.com/kb/TS3742
    http://support.apple.com/kb/TS2570
    http://support.apple.com/kb/TS1440
    http://support.apple.com/kb/HT1455
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/HT1379
    http://support.apple.com/kb/HT1509

  • Mavericks can only boot in safe mode

    In can only boot my Imac 27' (end of 2009) in safe mode.
    The problem started in Lion, when the computer suddenly froze.
    I upgraded (in safe mode) to Mavericks 10.9.2, took away all Launch Agents and Daemon that are not Apple (both in System and User's), done all the permission repairs, reset memory, fsck and turn the plug off the computer. The only thing I was not able to do is the hardware test (for some reason, the command + D to access the internet testing is not working). I have no external devices or cables attached.
    My 2TB hard drive is divided in 3 partitions. I have got 2 user accounts.
    Even with all this, I can only start in safe mode.
    Here is a copy of the log. If anyone can help, I would be grateful !
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.appstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
    Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.authd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.bookstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.eventmonitor" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.install" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.iokit.power" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.mail" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.MessageTracer" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.performance" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 kernel[0]: Longterm timer threshold: 1000 ms
    03.05.14 11:48:37.000 kernel[0]: Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
    03.05.14 11:48:37.000 kernel[0]: vm_page_bootstrap: 2015569 free pages and 65199 wired pages
    03.05.14 11:48:37.000 kernel[0]: kext submap [0xffffff7f807a6000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a6000]
    03.05.14 11:48:37.000 kernel[0]: zone leak detection enabled
    03.05.14 11:48:37.000 kernel[0]: "vm_compressor_mode" is 4
    03.05.14 11:48:37.000 kernel[0]: standard timeslicing quantum is 10000 us
    03.05.14 11:48:37.000 kernel[0]: standard background quantum is 2500 us
    03.05.14 11:48:37.000 kernel[0]: mig_table_max_displ = 74
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
    03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for TMSafetyNet
    03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for Sandbox
    03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for Quarantine
    03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    03.05.14 11:48:37.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    03.05.14 11:48:37.000 kernel[0]: The Regents of the University of California. All rights reserved.
    03.05.14 11:48:37.000 kernel[0]: MAC Framework successfully initialized
    03.05.14 11:48:37.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    03.05.14 11:48:37.000 kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)
    03.05.14 11:48:37.000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    03.05.14 11:48:37.000 kernel[0]: ACPI: sleep states S3 S4 S5
    03.05.14 11:48:37.000 kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
    03.05.14 11:48:37.000 kernel[0]: [ PCI configuration begin ]
    03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1144
    03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
    03.05.14 11:48:37.000 kernel[0]: console relocated to 0xf80010000
    03.05.14 11:48:37.000 kernel[0]: [ PCI configuration end, bridges 9, devices 21 ]
    03.05.14 11:48:37.000 kernel[0]: [ PCI configuration begin ]
    03.05.14 11:48:37.000 kernel[0]: [ PCI configuration end, bridges 10, devices 36 ]
    03.05.14 11:48:37.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 40d32dfffe04245e; max speed s800.
    03.05.14 11:48:37.000 kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
    03.05.14 11:48:37.000 kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
    03.05.14 11:48:37.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    03.05.14 11:48:37.000 kernel[0]: rooting via boot-uuid from /chosen: 48B4343E-ADD2-366E-8820-219D2141D0B7
    03.05.14 11:48:37.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    03.05.14 11:48:37.000 kernel[0]: handoff: unsupported os...
    03.05.14 11:48:37.000 kernel[0]: handoff: symbol mismatch...
    03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
    03.05.14 11:48:37.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HDS722020ALA330 Media/IOGUIDPartitionScheme/Macintosh HD@2
    03.05.14 11:48:37.000 kernel[0]: BSD root: disk0s2, major 1, minor 1
    03.05.14 11:48:37.000 kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
    03.05.14 11:48:37.000 kernel[0]: hfs: mounted Macintosh HD on device root_device
    03.05.14 11:48:37.000 kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0
    03.05.14 11:48:37.000 kernel[0]: 2.296383: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0
    03.05.14 11:48:37.000 kernel[0]: 2.300580: Atheros: mac 128.2 phy 13.0 radio 12.0
    03.05.14 11:48:37.000 kernel[0]: 2.300590: Use hw queue 0 for WME_AC_BE traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300596: Use hw queue 1 for WME_AC_BK traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300603: Use hw queue 2 for WME_AC_VI traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300609: Use hw queue 3 for WME_AC_VO traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300615: Use hw queue 8 for CAB traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300620: Use hw queue 9 for beacons
    03.05.14 11:48:37.000 kernel[0]: 2.300700: wlan_vap_create : enter. devhandle=0xd4f8c6b0, opmode=IEEE80211_M_STA, flags=0x1
    03.05.14 11:48:37.000 kernel[0]: 2.300743: wlan_vap_create : exit. devhandle=0xd4f8c6b0, opmode=IEEE80211_M_STA, flags=0x1.
    03.05.14 11:48:37.000 kernel[0]: 2.300778: ATH tunables:
    03.05.14 11:48:37.000 kernel[0]: 2.300782:   pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    03.05.14 11:48:37.000 kernel[0]: VM Swap Subsystem is ON
    03.05.14 11:48:37.000 kernel[0]: Waiting for DSMOS...
    03.05.14 11:48:37.000 kernel[0]: IOBluetoothUSBDFU::probe
    03.05.14 11:48:37.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0207
    03.05.14 11:48:37.000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xb400 ****
    03.05.14 11:48:10.829 com.apple.launchd[1]: *** launchd[1] has started up. ***
    03.05.14 11:48:10.830 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    03.05.14 11:48:37.000 kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xb400 ****
    03.05.14 11:48:37.000 kernel[0]: init
    03.05.14 11:48:37.000 kernel[0]: probe
    03.05.14 11:48:37.000 kernel[0]: start
    03.05.14 11:48:37.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xb400
    03.05.14 11:48:37.000 kernel[0]: [IOBluetoothHCIController][start] -- completed
    03.05.14 11:48:37.000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
    03.05.14 11:48:37.000 kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
    03.05.14 11:48:37.000 kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
    03.05.14 11:48:37.000 kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
    03.05.14 11:48:37.000 kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
    03.05.14 11:48:37.000 kernel[0]: ** Device in slot: SLOT--1 **
    03.05.14 11:48:37.000 kernel[0]: Previous Shutdown Cause: 3
    03.05.14 11:48:37.000 kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
    03.05.14 11:48:37.000 kernel[0]: DSMOS has arrived
    03.05.14 11:48:37.609 distnoted[66]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
    03.05.14 11:48:36.114 hidd[45]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
    03.05.14 11:48:36.115 fseventsd[46]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (502 27 1097)
    03.05.14 11:48:36.115 fseventsd[46]: log dir: /.fseventsd getting new uuid: 4CB3C308-0B39-4855-BD13-3F533C4457B9
    03.05.14 11:48:36.117 hidd[45]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    03.05.14 11:48:36.416 com.apple.usbmuxd[17]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
    03.05.14 11:48:36.633 kdc[42]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
    03.05.14 11:48:37.611 com.apple.launchd[1]: (com.apple.Kerberos.kdc[42]) Exited with code: 1
    03.05.14 11:48:37.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    03.05.14 11:48:37.000 kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    03.05.14 11:48:37.642 kdc[78]: label: default
    03.05.14 11:48:37.642 kdc[78]:     dbname: od:/Local/Default
    03.05.14 11:48:37.642 kdc[78]:     mkey_file: /var/db/krb5kdc/m-key
    03.05.14 11:48:37.642 kdc[78]:     acl_file: /var/db/krb5kdc/kadmind.acl
    03.05.14 11:48:38.242 com.apple.SecurityServer[24]: Session 100000 created
    03.05.14 11:48:38.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    03.05.14 11:48:38.000 kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x1a40 -- 0xe000 -- 0xb400 ****
    03.05.14 11:48:39.540 configd[56]: en0: DHCP duplicate configured service
    03.05.14 11:48:42.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    03.05.14 11:48:42.130 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
    03.05.14 11:48:43.069 configd[56]: dhcp_arp_router: en1 SSID unavailable
    03.05.14 11:48:43.078 configd[56]: setting hostname to "Macs-iMac-3.local"
    03.05.14 11:48:43.092 configd[56]: network changed.
    03.05.14 11:48:43.095 configd[56]: en0: DHCP duplicate configured service
    03.05.14 11:48:43.095 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
    03.05.14 11:48:43.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    03.05.14 11:48:43.492 mds[34]: (Normal) FMW: FMW 0 0
    03.05.14 11:48:44.000 kernel[0]: hfs: mounted Video on device disk0s4
    03.05.14 11:48:45.000 kernel[0]: hfs: mounted Musicas on device disk0s5
    03.05.14 11:48:46.690 com.apple.SecurityServer[24]: Entering service
    03.05.14 11:48:46.783 mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov  3 2013 18:51:09) starting OSXVers 13
    03.05.14 11:48:46.813 digest-service[67]: label: default
    03.05.14 11:48:46.813 digest-service[67]:     dbname: od:/Local/Default
    03.05.14 11:48:46.813 digest-service[67]:     mkey_file: /var/db/krb5kdc/m-key
    03.05.14 11:48:46.814 digest-service[67]:     acl_file: /var/db/krb5kdc/kadmind.acl
    03.05.14 11:48:46.816 digest-service[67]: digest-request: uid=0
    03.05.14 11:48:46.833 UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
    03.05.14 11:48:46.835 UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    03.05.14 11:48:46.870 digest-service[67]: digest-request: netr probe 0
    03.05.14 11:48:46.871 digest-service[67]: digest-request: init request
    03.05.14 11:48:46.879 digest-service[67]: digest-request: init return domain: BUILTIN server: MACS-IMAC-3 indomain was: <NULL>
    03.05.14 11:48:46.913 awacsd[59]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
    03.05.14 11:48:46.919 awacsd[59]: InnerStore CopyAllZones: no info in Dynamic Store
    03.05.14 11:48:47.229 locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
    03.05.14 11:48:47.243 locationd[40]: Location icon should now be in state 'Inactive'
    03.05.14 11:48:47.243 locationd[40]: locationd was started after an unclean shutdown
    03.05.14 11:48:47.401 airportd[63]: airportdProcessDLILEvent: en1 attached (up)
    03.05.14 11:48:47.000 kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1
    03.05.14 11:48:47.000 kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
    03.05.14 11:48:47.404 configd[56]: en0: DHCP duplicate configured service
    03.05.14 11:48:47.404 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
    03.05.14 11:48:47.000 kernel[0]: 38.870836: performCountryCodeOperation: Not connected, scan in progress[0]
    03.05.14 11:48:47.000 kernel[0]: 38.871785: setWOW_PARAMETERS:wowevents = 2(1)
    03.05.14 11:48:47.470 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    03.05.14 11:48:47.532 loginwindow[38]: Login Window Application Started
    03.05.14 11:48:47.000 kernel[0]: en1: 802.11d country code set to 'US '.
    03.05.14 11:48:47.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    03.05.14 11:48:47.589 sandboxd[113]: ([63]) airportd(63) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.506705CD-8AA9-5 340-BEA4-87BBB2A2E261.plist
    03.05.14 11:48:48.103 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:48.167 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:48.530 networkd[118]: networkd.118 built Aug 24 2013 22:08:46
    03.05.14 11:48:49.138 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:49.178 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:50.136 WindowServer[115]: Server is starting up
    03.05.14 11:48:50.229 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:50.262 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:50.542 systemkeychain[102]: done file: /var/run/systemkeychaincheck.done
    03.05.14 11:48:50.554 configd[56]: network changed: DNS*
    03.05.14 11:48:50.556 configd[56]: network changed: DNS*
    03.05.14 11:48:50.557 mDNSResponder[35]: D2D_IPC: Loaded
    03.05.14 11:48:50.557 mDNSResponder[35]: D2DInitialize succeeded
    03.05.14 11:48:50.561 mDNSResponder[35]:   4: Listening for incoming Unix Domain Socket client requests
    03.05.14 11:48:50.561 mDNSResponder[35]: Adding registration domain 156425616.members.btmm.icloud.com.
    03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AB802360 Macs-iMac-3.local. (Addr) that's already in the list
    03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AB8027F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
    03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AA81BD60 Macs-iMac-3.local. (AAAA) that's already in the list
    03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AA81C1F0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
    03.05.14 11:48:51.199 kdc[78]: KDC started
    03.05.14 11:48:51.321 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:51.362 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:51.520 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    03.05.14 11:48:51.571 awacsd[59]: Configuring lazy AWACS client: 156425616.p07.members.btmm.icloud.com.
    03.05.14 11:48:52.000 kernel[0]: [BNBMouseDevice::init][80.14] init is complete
    03.05.14 11:48:52.000 kernel[0]: [BNBMouseDevice::handleStart][80.14] returning 1
    03.05.14 11:48:52.000 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
    03.05.14 11:48:52.603 fseventsd[46]: event logs in /Volumes/Video/.fseventsd out of sync with volume.  destroying old logs. (157 8 1095)
    03.05.14 11:48:52.000 kernel[0]: [AppleMultitouchDevice::start] entered
    03.05.14 11:48:53.586 fseventsd[46]: log dir: /Volumes/Video/.fseventsd getting new uuid: DF46AA4B-9528-407F-AD85-EAC421E431C3
    03.05.14 11:48:54.638 awacsd[59]: KV HTTP 0
    03.05.14 11:48:54.655 fseventsd[46]: event logs in /Volumes/Musicas/.fseventsd out of sync with volume.  destroying old logs. (155 10 1095)
    03.05.14 11:48:55.000 kernel[0]: hfs: mounted Recovery HD on device disk0s3
    03.05.14 11:48:55.424 mds[34]: (Normal) Volume: volume:0x7f8813845200 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
    03.05.14 11:48:56.202 fseventsd[46]: log dir: /Volumes/Musicas/.fseventsd getting new uuid: DBDC9085-505D-4A24-8508-5C15EBF36DFA
    03.05.14 11:48:57.243 WindowServer[115]: Session 256 retained (2 references)
    03.05.14 11:48:57.243 WindowServer[115]: Session 256 released (1 references)
    03.05.14 11:48:57.280 WindowServer[115]: Session 256 retained (2 references)
    03.05.14 11:48:57.282 WindowServer[115]: init_page_flip: page flip mode is on
    03.05.14 11:48:57.000 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
    03.05.14 11:48:57.000 kernel[0]: AirPort: Link Up on en1
    03.05.14 11:48:57.000 kernel[0]: 48.780691: apple80211Request[10514] Unsupported ioctl 181
    03.05.14 11:48:57.000 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
    03.05.14 11:48:57.000 kernel[0]: AirPort: RSN handshake complete on en1
    03.05.14 11:48:57.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    03.05.14 11:48:57.927 fseventsd[46]: Logging disabled completely for device:1: /Volumes/Recovery HD
    03.05.14 11:48:57.000 kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
    03.05.14 11:48:58.530 WindowServer[115]: Found 39 modes for display 0x00000000 [36, 3]
    03.05.14 11:48:58.533 WindowServer[115]: Found 1 modes for display 0x00000000 [1, 0]
    03.05.14 11:48:58.534 WindowServer[115]: mux_initialize: Couldn't find any matches
    03.05.14 11:48:58.535 WindowServer[115]: Found 39 modes for display 0x00000000 [36, 3]
    03.05.14 11:48:58.538 WindowServer[115]: Found 1 modes for display 0x00000000 [1, 0]
    03.05.14 11:48:59.640 awacsd[59]: KV HTTP 0
    03.05.14 11:49:00.487 configd[56]: network changed: DNS* Proxy
    03.05.14 11:49:00.487 UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Apple Network 825b35' making interface primary (protected network)
    03.05.14 11:49:00.488 UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
    03.05.14 11:49:00.489 UserEventAgent[11]: Captive: en1: Probing 'Apple Network 825b35'
    03.05.14 11:49:00.493 configd[56]: network changed: v4(en1!:10.0.1.5) DNS+ Proxy+ SMB
    03.05.14 11:49:02.569 ntpd[135]: proto: precision = 1.000 usec
    03.05.14 11:49:02.673 racoon[157]: accepted connection on vpn control socket.
    03.05.14 11:49:02.811 UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
    03.05.14 11:49:03.100 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    03.05.14 11:49:04.537 apsd[61]: Unrecognized leaf certificate
    03.05.14 11:49:14.000 kernel[0]: utun_ctl_connect: creating interface utun0
    03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
    03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
    03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.376 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
    03.05.14 11:49:14.376 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.377 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
    03.05.14 11:49:14.377 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
    03.05.14 11:49:14.378 configd[56]: en0: DHCP duplicate configured service
    03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.378 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
    03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
    03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    03.05.14 11:49:20.396 mDNSResponder[35]: ERROR: socket closed prematurely tcpInfo->nread = 0
    03.05.14 11:49:23.596 mDNSResponder[35]: ERROR: socket closed prematurely tcpInfo->nread = 0
    03.05.14 11:50:16.742 warmd[16]: [warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
    03.05.14 11:50:16.743 warmd[16]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke:2329] Unable to open i386 shared cache: 2 No such file or directory
    03.05.14 11:50:51.617 apsd[61]: Failed to send activation record to service com.apple.ManagedClient.enroll
    03.05.14 11:51:07.187 distnoted[172]: # distnote server agent  absolute time: 177.064182367   civil time: Sat May  3 11:51:07 2014   pid: 172 uid: 502  root: no
    03.05.14 11:51:24.977 mdworker[177]: (Warning) Import: import uti:com.adobe.pdf plugin:/Library/Spotlight/PDF.mdimporter uuid:7D48EF77-69AB-47DB-BBD9-D907F89C3C17 61 exceeded cpu use limits (12) after 12997 milliseconds sizing:0 - find suspect file using: sudo mdutil -t 842802
    03.05.14 11:51:25.032 com.apple.SecurityServer[24]: Session 100003 created
    03.05.14 11:51:25.033 com.apple.SecurityServer[24]: Session 100005 created
    03.05.14 11:51:38.595 mdworker[184]: (Warning) Import: import uti:com.adobe.pdf plugin:/Library/Spotlight/PDF.mdimporter uuid:7D48EF77-69AB-47DB-BBD9-D907F89C3C17 61 exceeded cpu use limits (12) after 12980 milliseconds sizing:0 - find suspect file using: sudo mdutil -t 842802

    I have tried a few other tricks from the experts in the discussion boards (including removing all preference files that are non apple, remove all non apple extensions), still no way to start up the computer other than safe boot.
    I would like to try and turn off bonjour, as it seems like a MDNSResponder Error. But need a green light from any of you experts.
    I am posting the latest system log (on this one, I forgot to unplug the printer)
    Please help !!!
    May  4 20:38:05 localhost bootlog[0]: BOOT_TIME 1399246685 0
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.appstore" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
        Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.authd" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.bookstore" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.eventmonitor" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.install" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.iokit.power" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.mail" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.MessageTracer" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.performance" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.securityd" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:45 --- last message repeated 6 times ---
    May  4 20:38:44 localhost kernel[0]: Longterm timer threshold: 1000 ms
    May  4 20:38:44 localhost kernel[0]: Darwin Kernel Version 13.1.0: Wed Apr  2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
    May  4 20:38:44 localhost kernel[0]: vm_page_bootstrap: 2008481 free pages and 72287 wired pages
    May  4 20:38:44 localhost kernel[0]: kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000]
    May  4 20:38:44 localhost kernel[0]: zone leak detection enabled
    May  4 20:38:44 localhost kernel[0]: "vm_compressor_mode" is 4
    May  4 20:38:44 localhost kernel[0]: standard timeslicing quantum is 10000 us
    May  4 20:38:44 localhost kernel[0]: standard background quantum is 2500 us
    May  4 20:38:44 localhost kernel[0]: mig_table_max_displ = 74
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
    May  4 20:38:44 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
    May  4 20:38:44 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    May  4 20:38:44 localhost kernel[0]: calling mpo_policy_init for Sandbox
    May  4 20:38:44 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    May  4 20:38:44 localhost kernel[0]: calling mpo_policy_init for Quarantine
    May  4 20:38:44 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    May  4 20:38:44 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    May  4 20:38:44 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    May  4 20:38:44 localhost kernel[0]: MAC Framework successfully initialized
    May  4 20:38:44 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    May  4 20:38:44 localhost kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)
    May  4 20:38:44 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    May  4 20:38:44 localhost kernel[0]: ACPI: sleep states S3 S4 S5
    May  4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1144
    May  4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
    May  4 20:38:44 localhost kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
    May  4 20:38:44 localhost kernel[0]: [ PCI configuration begin ]
    May  4 20:38:44 localhost kernel[0]: console relocated to 0xf80010000
    May  4 20:38:44 localhost kernel[0]: [ PCI configuration end, bridges 9, devices 21 ]
    May  4 20:38:44 localhost kernel[0]: [ PCI configuration begin ]
    May  4 20:38:44 localhost kernel[0]: [ PCI configuration end, bridges 10, devices 36 ]
    May  4 20:38:44 localhost kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
    May  4 20:38:44 localhost kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
    May  4 20:38:44 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    May  4 20:38:44 localhost kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 40d32dfffe04245e; max speed s800.
    May  4 20:38:44 localhost kernel[0]: rooting via boot-uuid from /chosen: 48B4343E-ADD2-366E-8820-219D2141D0B7
    May  4 20:38:44 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    May  4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    May  4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    May  4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    May  4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    May  4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
    May  4 20:38:44 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HDS722020ALA330 Media/IOGUIDPartitionScheme/Macintosh HD@2
    May  4 20:38:44 localhost kernel[0]: BSD root: disk0s2, major 1, minor 2
    May  4 20:38:44 localhost kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
    May  4 20:38:44 localhost kernel[0]: hfs: mounted Macintosh HD on device root_device
    May  4 20:38:44 localhost kernel[0]: USBF:    1.518    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 3 of Hub at 0xfd140000)
    May  4 20:38:44 localhost kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0
    May  4 20:38:44 localhost kernel[0]: 2.257313: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0
    May  4 20:38:44 localhost kernel[0]: 2.261494: Atheros: mac 128.2 phy 13.0 radio 12.0
    May  4 20:38:44 localhost kernel[0]: 2.261504: Use hw queue 0 for WME_AC_BE traffic
    May  4 20:38:44 localhost kernel[0]: 2.261510: Use hw queue 1 for WME_AC_BK traffic
    May  4 20:38:44 localhost kernel[0]: 2.261516: Use hw queue 2 for WME_AC_VI traffic
    May  4 20:38:44 localhost kernel[0]: 2.261522: Use hw queue 3 for WME_AC_VO traffic
    May  4 20:38:44 localhost kernel[0]: 2.261529: Use hw queue 8 for CAB traffic
    May  4 20:38:44 localhost kernel[0]: 2.261534: Use hw queue 9 for beacons
    May  4 20:38:44 localhost kernel[0]: 2.261612: wlan_vap_create : enter. devhandle=0xd6b8f6b0, opmode=IEEE80211_M_STA, flags=0x1
    May  4 20:38:44 localhost kernel[0]: 2.261651: wlan_vap_create : exit. devhandle=0xd6b8f6b0, opmode=IEEE80211_M_STA, flags=0x1.
    May  4 20:38:44 localhost kernel[0]: 2.261688: ATH tunables:
    May  4 20:38:44 localhost kernel[0]: 2.261691:   pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    May  4 20:38:44 localhost kernel[0]: USBF:    4.521    The IOUSBFamily was not able to enumerate a device.
    May  4 20:38:44 localhost kernel[0]: USBF:    5.362    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 3 of Hub at 0xfd140000)
    May  4 20:38:44 localhost kernel[0]: USBF:    8.760    The IOUSBFamily was not able to enumerate a device.
    May  4 20:38:44 localhost kernel[0]: USBF:    9.587    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 3 of Hub at 0xfd140000)
    May  4 20:38:44 localhost kernel[0]: USBF:    10.418    The IOUSBFamily gave up enumerating a USB device after 10 retries.  (Port 3 of Hub at 0xfd140000)
    May  4 20:38:44 localhost kernel[0]: USBF:    10.418    The IOUSBFamily was not able to enumerate a device.
    May  4 20:38:44 localhost kernel[0]: process taskgated[13] caught causing excessive wakeups. Observed wakeups rate (per sec): 1596; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45036
    May  4 20:38:44 localhost kernel[0]: VM Swap Subsystem is ON
    May  4 20:38:06 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
    May  4 20:38:06 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    May  4 20:38:32 localhost hidd[44]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
    May  4 20:38:36 localhost hidd[44]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    May  4 20:38:44 localhost com.apple.SecurityServer[25]: Session 100000 created
    May  4 20:38:45 localhost distnoted[65]: # distnote server daemon  absolute time: 28.917725827   civil time: Sun May  4 20:38:33 2014   pid: 65 uid: 0  root: yes
    May  4 20:38:46 localhost revisiond[27]: sandbox cache error 3850
    May  4 20:38:46 localhost blued[57]: sandbox cache error 11: database disk image is malformed
    May  4 20:38:46 localhost ReportCrash[71]: Invoking spindump for pid=13 wakeups_rate=1596 duration=29 because of excessive wakeups
    May  4 20:38:47 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    May  4 20:38:47 localhost kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    May  4 20:38:47 localhost spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:38:47 localhost spindump[73]: Unable to register Stop Spinning port: 1011
    May  4 20:38:47 localhost kernel[0]: Waiting for DSMOS...
    May  4 20:38:48 localhost spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:38:48 localhost kdc[42]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
    May  4 20:38:48 localhost com.apple.launchd[1] (com.apple.Kerberos.kdc[42]): Exited with code: 1
    May  4 20:38:49 localhost kernel[0]: IOBluetoothUSBDFU::probe
    May  4 20:38:49 localhost kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0207
    May  4 20:38:49 localhost kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xec00 ****
    May  4 20:38:49 localhost kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xec00 ****
    May  4 20:38:49 localhost kernel[0]: init
    May  4 20:38:49 localhost kernel[0]: probe
    May  4 20:38:49 localhost kernel[0]: start
    May  4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xec00
    May  4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
    May  4 20:38:49 localhost kernel[0]: ** Device in slot: SLOT--1 **
    May  4 20:38:49 localhost kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
    May  4 20:38:49 localhost kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
    May  4 20:38:49 localhost kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
    May  4 20:38:49 localhost kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
    May  4 20:38:49 localhost kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
    May  4 20:38:49 localhost kernel[0]: Previous Shutdown Cause: 3
    May  4 20:38:49 localhost kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
    May  4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    May  4 20:38:49 localhost kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x1240 -- 0x7800 -- 0xec00 ****
    May  4 20:38:49 localhost kernel[0]: DSMOS has arrived
    May  4 20:38:50 localhost com.apple.SecurityServer[25]: Entering service
    May  4 20:38:51 localhost kdc[79]: label: default
    May  4 20:38:51 localhost kdc[79]:     dbname: od:/Local/Default
    May  4 20:38:51 localhost kdc[79]:     mkey_file: /var/db/krb5kdc/m-key
    May  4 20:38:51 localhost kdc[79]:     acl_file: /var/db/krb5kdc/kadmind.acl
    May  4 20:38:52 localhost digest-service[66]: label: default
    May  4 20:38:52 localhost digest-service[66]:     dbname: od:/Local/Default
    May  4 20:38:52 localhost digest-service[66]:     mkey_file: /var/db/krb5kdc/m-key
    May  4 20:38:52 localhost digest-service[66]:     acl_file: /var/db/krb5kdc/kadmind.acl
    May  4 20:38:52 localhost kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    May  4 20:38:52 localhost configd[55]: dhcp_arp_router: en1 SSID unavailable
    May  4 20:38:52 localhost configd[55]: network changed.
    May  4 20:38:53 Macs-iMac-3.local configd[55]: setting hostname to "Macs-iMac-3.local"
    May  4 20:38:53 Macs-iMac-3.local digest-service[66]: digest-request: uid=0
    May  4 20:38:53 Macs-iMac-3.local com.apple.usbmuxd[17]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
    May  4 20:38:53 Macs-iMac-3.local mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov  3 2013 18:51:09) starting OSXVers 13
    May  4 20:38:55 Macs-iMac-3 kernel[0]: hfs: mounted Video on device disk0s4
    May  4 20:38:56 Macs-iMac-3.local apsd[60]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:38:56 Macs-iMac-3.local aosnotifyd[61]: aosnotifyd has been launched
    May  4 20:38:57 Macs-iMac-3.local systemkeychain[94]: done file: /var/run/systemkeychaincheck.done
    May  4 20:38:57 Macs-iMac-3 kernel[0]: hfs: mounted Musicas on device disk0s5
    May  4 20:38:58 Macs-iMac-3.local configd[55]: network changed: DNS*
    May  4 20:38:58 --- last message repeated 1 time ---
    May  4 20:38:58 Macs-iMac-3.local stackshot[21]: Timed out waiting for IOKit to finish matching.
    May  4 20:38:58 Macs-iMac-3.local awacsd[58]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
    May  4 20:38:59 Macs-iMac-3.local airportd[62]: airportdProcessDLILEvent: en1 attached (up)
    May  4 20:38:59 Macs-iMac-3 kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1
    May  4 20:38:59 Macs-iMac-3 kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
    May  4 20:38:59 Macs-iMac-3.local digest-service[66]: digest-request: netr probe 0
    May  4 20:38:59 Macs-iMac-3.local digest-service[66]: digest-request: init request
    May  4 20:39:00 Macs-iMac-3.local digest-service[66]: digest-request: init return domain: BUILTIN server: MACS-IMAC-3 indomain was: <NULL>
    May  4 20:39:00 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
    May  4 20:39:01 Macs-iMac-3.local loginwindow[38]: Login Window Application Started
    May  4 20:39:01 Macs-iMac-3.local UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    May  4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: D2D_IPC: Loaded
    May  4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: D2DInitialize succeeded
    May  4 20:39:02 Macs-iMac-3.local mDNSResponder[35]:   4: Listening for incoming Unix Domain Socket client requests
    May  4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: Adding registration domain 156425616.members.btmm.icloud.com.
    May  4 20:39:02 Macs-iMac-3.local kdc[79]: KDC started
    May  4 20:39:02 Macs-iMac-3.local awacsd[58]: Configuring lazy AWACS client: 156425616.p07.members.btmm.icloud.com.
    May  4 20:39:03 Macs-iMac-3.local networkd[124]: networkd.124 built Aug 24 2013 22:08:46
    May  4 20:39:03 Macs-iMac-3.local awacsd[58]: KV HTTP 0
    May  4 20:39:06 Macs-iMac-3.local apsd[60]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:39:08 Macs-iMac-3.local mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    May  4 20:39:09 Macs-iMac-3.local awacsd[58]: KV HTTP 0
    May  4 20:39:09 Macs-iMac-3.local spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:39:10 Macs-iMac-3.local sandboxd[116] ([62]): airportd(62) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.506705CD-8AA9-5 340-BEA4-87BBB2A2E261.plist
    May  4 20:39:11 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    May  4 20:39:11 Macs-iMac-3.local blued[57]: hostControllerOnline - Number of Paired devices = 5, List of Paired devices = (
            "00-22-41-ce-73-b2",
            "7c-d1-c3-bc-ed-9b",
            "04-f1-3e-e9-76-f5",
            "d4-88-90-f0-2d-96",
            "90-27-e4-f2-fd-53"
    May  4 20:39:12 Macs-iMac-3.local blued[57]: link key found for device: 04-f1-3e-e9-76-f5
    May  4 20:39:12 Macs-iMac-3.local blued[57]: Save link key for device: 04-f1-3e-e9-76-f5
    May  4 20:39:12 Macs-iMac-3.local blued[57]: link key found for device: 7c-d1-c3-bc-ed-9b
    May  4 20:39:12 Macs-iMac-3.local blued[57]: Save link key for device: 7c-d1-c3-bc-ed-9b
    May  4 20:39:13 Macs-iMac-3 kernel[0]: [BNBMouseDevice::init][80.14] init is complete
    May  4 20:39:13 Macs-iMac-3 kernel[0]: [BNBMouseDevice::handleStart][80.14] returning 1
    May  4 20:39:13 Macs-iMac-3 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
    May  4 20:39:13 Macs-iMac-3 kernel[0]: [AppleMultitouchDevice::start] entered
    May  4 20:39:14 Macs-iMac-3.local blued[57]: [setFeatureWithReportID] Could not set report
    May  4 20:39:19 Macs-iMac-3.local awacsd[58]: KV HTTP 0
    May  4 20:39:21 Macs-iMac-3 kernel[0]: 76.792776: setWOW_PARAMETERS:wowevents = 2(1)
    May  4 20:39:21 Macs-iMac-3.local WindowServer[118]: Server is starting up
    May  4 20:39:22 Macs-iMac-3 kernel[0]: 77.481213: performCountryCodeOperation: Not connected, scan in progress[0]
    May  4 20:39:22 Macs-iMac-3.local locationd[40]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this compatiblity mapping behavior in the near future.
    May  4 20:39:22 Macs-iMac-3.local locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
    May  4 20:39:22 Macs-iMac-3 kernel[0]: en1: 802.11d country code set to 'US '.
    May  4 20:39:22 Macs-iMac-3 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    May  4 20:39:22 Macs-iMac-3.local mds[34]: (Normal) FMW: FMW 0 0
    May  4 20:39:23 Macs-iMac-3.local locationd[40]: Location icon should now be in state 'Inactive'
    May  4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FA01AD60 Macs-iMac-3.local. (Addr) that's already in the list
    May  4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FA01B1F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
    May  4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FB801B60 Macs-iMac-3.local. (AAAA) that's already in the list
    May  4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FB801FF0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
    May  4 20:39:27 Macs-iMac-3 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
    May  4 20:39:27 Macs-iMac-3 kernel[0]: AirPort: Link Up on en1
    May  4 20:39:27 Macs-iMac-3 kernel[0]: 83.354881: apple80211Request[10514] Unsupported ioctl 181
    May  4 20:39:27 Macs-iMac-3 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
    May  4 20:39:27 Macs-iMac-3 kernel[0]: AirPort: RSN handshake complete on en1
    May  4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 retained (2 references)
    May  4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 released (1 references)
    May  4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 retained (2 references)
    May  4 20:39:28 Macs-iMac-3.local WindowServer[118]: init_page_flip: page flip mode is on
    May  4 20:39:28 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 39 modes for display 0x00000000 [36, 3]
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 1 modes for display 0x00000000 [1, 0]
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: mux_initialize: Couldn't find any matches
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 39 modes for display 0x00000000 [36, 3]
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 1 modes for display 0x00000000 [1, 0]
    May  4 20:39:30 Macs-iMac-3.local configd[55]: network changed: DNS* Proxy
    May  4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Apple Network 825b35' making interface primary (protected network)
    May  4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
    May  4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: en1: Probing 'Apple Network 825b35'
    May  4 20:39:30 Macs-iMac-3.local configd[55]: network changed: v4(en1!:10.0.1.5) DNS+ Proxy+ SMB
    May  4 20:39:31 Macs-iMac-3.local racoon[146]: accepted connection on vpn control socket.
    May  4 20:39:32 Macs-iMac-3.local ntpd[132]: proto: precision = 1.000 usec
    May  4 20:39:32 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
    May  4 20:39:33 Macs-iMac-3.local apsd[60]: Unrecognized leaf certificate
    May  4 20:39:35 Macs-iMac-3.local mds_stores[129]: (/private/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T)(Error) IndexCI in void _indexEmergencyUnmap(void *):live.1. marking invalid
    May  4 20:39:43 --- last message repeated 1 time ---
    May  4 20:39:43 Macs-iMac-3 kernel[0]: utun_ctl_connect: creating interface utun0
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    May  4 20:40:25 Macs-iMac-3.local warmd[16]: [warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
    May  4 20:40:25 Macs-iMac-3.local warmd[16]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke:2329] Unable to open i386 shared cache: 2 No such file or directory
    May  4 20:40:31 Macs-iMac-3 kernel[0]: considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild
    May  4 20:40:42 Macs-iMac-3.local com.apple.kextcache[154]: kext com.jmicron.JMicronATA  101069000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASRAID  307029000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASHBA3  100059000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASHBA  200009000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressPCIUl4  404029000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOCelerityFC  304089000 is in exception list, allowing to load
    May  4 20:40:55 Macs-iMac-3.local com.apple.kextcache[154]: kext com.Accusys.driver.Acxxx  300029000 is in exception list, allowing to load
    May  4 20:41:16 Macs-iMac-3.local com.apple.kextcache[154]: Created prelinked kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.
    May  4 20:42:17 Macs-iMac-3.local distnoted[161]: # distnote server agent  absolute time: 252.755084619   civil time: Sun May  4 20:42:17 2014   pid: 161 uid: 502  root: no
    May  4 20:42:18 Macs-iMac-3.local mdworker[157]: sandbox cache error 3850
    May  4 20:42:37 Macs-iMac-3.local distnoted[169]: # distnote server agent  absolute time: 272.385323107   civil time: Sun May  4 20:42:37 2014   pid: 169 uid: 89  root: no
    May  4 20:42:38 Macs-iMac-3.local com.apple.SecurityServer[25]: Session 100005 created
    May  4 20:42:38 Macs-iMac-3.local com.apple.SecurityServer[25]: Session 100004 created
    May  4 20:42:50 Macs-iMac-3.local mds[34]: (Normal) Volume: volume:0x7faf09848800 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.vXiC4Y
    May  4 20:45:38 localhost bootlog[0]: BOOT_TIME 1399247138 0

  • Can't boot iBook with install disc

    Hi All,
    I've inherited an old clamshell iBook that freezes every time I try to boot from the install disc.
    The iBook came with 0S9.2 installed and everything seemed to be working OK. I then tried to upgrade it using a retail Jaguar disc and it froze on booting up. Now it won't even load OS9 but instead gives me a blinking folder with a question mark.
    When I try to install from the Jaguar boot disc, I get the Apple logo and then it freezes right there. I tried zapping the P-Ram a few times and that didn't fix it. I tried holding Option key when loading and got to the screen where it lists boot options. I chose OS X and it after the logo comes up, it freezes.
    Have also tried re-seating and completely removing the RAM. No difference.
    When I go into verbose mode I get some kind of kernel panic error freeze and the keyboard won't let me input anything.
    I reached the open firmware screen and it says Powerbook2,1 4.1.7f4 so I think that means my firmware is fine for OS X.
    I unfortunately don't have access to an OS 9.2 disc so can't boot into that from disc. I think my 9.2 system folder needs to be re-blessed or something like that but have no way to reach it.
    Any suggestions?

    Ok, well, I believe that in order to re-bless the OS 9 system folder, you need the OS 9 CD. (I'm not an OS 9 expert, but that's what I've seen online).
    However, if you install 10.2 (or 10.3) on the computer, it should boot right into it and you don't even "need" OS 9 any more.
    I'm starting to think you have a hardware problem of some kind, and the first place to check is the RAM. OS X is more finicky than OS 9 was with RAM, so do you have another memory module you could install to check? Or perhaps another clamshell (like was suggested) to try your RAM in?
    Do you have an Apple Hardware test disk? My next suggestion would be to get one and to run the test and see what (if any) hardware is having problems.
    And one more thought: if you can boot using the 10.3 disk, try running Disk Utility and repairing your disk a couple of times. Maybe there's a problem in your hard drive.
    Rich

  • Can't boot from external HD with Leopard on MacBook Pro or PowerBook

    I can't boot from an external HD with 10.5.5 Leopard on either my MacBook Pro or my PowerBook G4. I had a PowerBook G4 from which I could boot from either an external FW400 drive or an external FW800 drive. At some point, I stopped being able to boot from any HD, but I'm not sure if it was after upgrading to Leopard or not? Recently I just bought a MacBook Pro 15" and transferred all my files over from the PowerBook to the MacBook Pro during the install. However, even with the new computer, still cannot boot from an external drive. I have Leopard 10.5.5 running on both the external HD and the internal HD.
    Is this a common problem? Anybody know how to fix it?
    Thanks!

    That probably wasn't very clear was it? I have several ext. HD's, some with bootable systems and some just backups. One bootable disk was made with CopyCloner and the other was a clean format and only had an original install of the OS just to use for an emergency boot. They both booted just fine. Then at some point, they stopped being bootable. I have used the Control Panel "Startup" and also used the Option key boot and picked the bootable disk. Neither one boots anymore. It started doing this on the old PowerBook and then also refused to boot on the MacBook Pro. This is not the problem with the HD since it happens with any bootable HD. Something is going on at the system level and it was transfered from the PowerBook to the MacBook.
    Thanks,
    Bill

  • Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

    Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

    Which keyboard layout you were using? German, French ... I suppose your layout is reset to the default: US and you are unable to find the "?" or "/" ...
    Please have a look into the keyboard viewer, to see how the layout of your keyboard is actually.
    marek

Maybe you are looking for

  • "could not save list changes to the server" while creating a new form in SharePoint Designer - custom content type

    i am getting "could not save list changes to the server" while creating a new form in SharePoint Designer. Actually the list was created with a custom content type. When i try to create a new form from the custom content type, it fails. However, when

  • XY Graph problems

    Hi, i have a NI 6008 data aquisition board and i have to do a XY graph using two voltage signals. I can see the signals in labview but i cant create the graph like i want, it has Amplitude/time, i want signal1/signal2, how do i do it? Another questio

  • Downloadable ACLs and Access Points

    Is it possible to use Downloadable ACLs (via ACS) with WLAN Clients that attach to a 1200AP? I have tried but it is not working. I think it is because the AP is acting as a bridge to the clients and the ACLs are layer 3/4 aware, but i am new to Airon

  • 5.1 sound through headphones with music player?

    5.1 works great through the headphones when you're watching a video on the net. Does not work when listening through the music player. I get an error message that says I need to turn the effects off. Ok..done what I can and still no luck. Oh yea, unp

  • Wireless ad hoc routing protocols

    I have an application that uses wireless ad hoc routing protocols (node-to-node communication).  Has anyone developed any application that implements wireless ad hoc networking protocols, such as route discovery, route maintenance etc. using LabView?