Solaris 10 11/06 installation problem?

hi,
i am new to solaris and just started to install the solaris 10 11/06, the partition for solaris installation is the first primary partition, auto slices was 4,4 GB for /, 1,4 GB for ovarlape,10 GB for /export/home and 500 MB for swap but i customized just for 2 slices one / 14 GB and other swap 660 MB, the installation process completed 100% but then hanged with this error messages:
Installing boot information:
-Updating boot enviroment configuration
-Installing boot blocks (c0d1)
-Installing boot blocks (/dev/rdsk/c0d1s0)
connot open/stat device /dev/rdsk/c0d1s2
ERROR: installboot (1M) failed
ERROR: could not install boot blocks
i pressed the reboot button and got the black screen with this message:
Bad PBR Sig
I wiped the installation again and want to install but waiting for help please:
First what all that error means?
Second where is my installation mistake to solve that?
Third is / and swap enough for installaion or use the auto layout of solairs as i mentioned above?

1-Make the Solaris partion "the only" active partition
2-Boot up the system in single user mode, mount "a"
3-Install solaris grub on mbr (/a/sbin/installgrub -m /a/boot/grub/stage1 /a/boot/grub/stage2 /dev/rdsk/<slice>) (i like solaris bundled version of grub :) )
before 3, make sure you got the entries for any other operating system/sytems in your active grub's /boot/grub/menu.lst file to be added to solaris's menu.lst file later.
Reboot, edit menu.lst as necessary.
Good luck.

Similar Messages

Solaris 11.2 x86 installation problem on GPT partitioned SSD

I recently bought a new computer with Windows 8.1 pre-installed on it. I want to install Solaris 11.2 as dual-boot together with the pre-installed windows 8.1.
The computer has a 128 GB SSD which is GPT partitioned. The SSD has 5 GPT partitions which are in use. I used a partition manager in Windows to shrink the size of the 5th partition (the windows system partition) so that i now have about 31 GB of unpartitioned, unused space after the 5 used partitions where i want to install Solaris into.
For installation, I downloaded the Solaris text installer ISO and burned it onto a CD-R. Now, whenever the installation menu shows me the GPT partitions of my SSD and i choose "Use a GPT partition of the disk" it always goes back to the first menu screen where it says "Welcome to the Oracle Solaris installtion menu".
Also, the installation menu shows the 5 used GPT partitions correctly, but then it shows me not one, but two partitions as "unused" with a size of 0.0 MB.
What am i doing wrong?

If you have support, then you will be better served by opening a support case.
Assuming you don't, or you would have gone there already... There may well be bugs with supporting multiple OS's under GPT partitions. I have no idea how much testing we did for such cases, and to be totally honest we put little effort into dual-booting systems these days, as using VM's in VIrtualBox or other VM managers is a better answer for 90i+% of people.
That said, posting the output from prtvtoc for the disk would give someone a chance to see if there's an obvious bug.

CTM 8.0 Solaris 10 Sparc-64 Installation Problems

I am installing CTM 8.0 on a Solaris 10, Sparc 64 Sun Server/Workstation. I am having a problem installing the CTM, I installed Oracle 9i with no problems(that I know of) with patch 9.2.0.8. When I go to start the ctmsetup.sh it checks for the latest version of JRE, which is fine, however it says that I don't have the Solaris patches for JRE and it lists them. Well the patches I have are more up to date then those listed so when I tried to install the patches they listed it said that they were obsoleted by what I have already. Secondly it gives the message "Starting Cisco CTM Server Installation using Install Anywhere" but then the next line says "You pressed Cancel/Upgrade/Install" when I hadn't pressed anything, and it just stays there. Your help is much appreciated.
Thanks!

Hi, how you setup oracle 9.2.0.8 patch?? I tried
cd /oraclesw9i/Disk1
./runInstaller -silent -responseFile /oraclesw9i/patchset_64bit_9208.rsp but, with key -silent i have an error: cannot communicate with X server, on my WinXP workstation?
echo $DISPLAY > myws:0.0

Installation problems on Solaris 9

I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp/ttainst_1/ttapkg.15978/pkg>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

from the diagnostic details:
Architecture           spso0509
Host           SunOS e220r 5.9 Generic_117171-17 sun4u sparc SUNW,Ultra-60
Package           Tarantella Secure Global Desktop Enterprise Edition for
SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Andrew
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Hangul
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Platform
Identity Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Security
Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Windows
Connectivity Pack for SPARC Solaris 2.8+ (4.10.903)
Bill Weir wrote:
Gavin,
Glad you're sorted. Can you confirm that it is 4.10.903 you are using
(not 4.00.903)? I'm concerned if this installation problem is still
present in the later version.
Bill
Gavin Westermann wrote on 31/08/2005 05:00:
Bill - that seems to have done the trick! the installation is now running.
Thanks so much for this.I am running a pair of Sun Ray 170's on my desk
here at home mated to an E220R. I am hoping to use Tarantella to be able
to access and run apps on a win3k server in the same rack.
Gavin
Bill Weir wrote:
Gavin,
This looks like a known problem with TTA 4.00.903 and some Solaris
patches which were distributed at about the same time. However, you say
you're using 4.10.903, and as far as I know the problem should be fixed
in that version.
You could try the workaround described in
http://www.tarantella.com/documentation/sgd/ee/4.0/install.html - search
for "tta_pkgadd" on that page and follow the instructions given there.
Regards,
Bill Weir, Sun Microsystems Inc.
Gavin Westermann wrote on 30/08/2005 05:06:
I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

Problem with solaris 10 08/11 installation on x86 workstation (DELL T5500)

Trying to install solaris 10 08/11 installation on x86 workstation (DELL T5500). Following error message was received after selecting the Oracle Solaris interactive Text (Desktop Session) installation method-
SunOS Release 5.10 Version Generic_147441-01 64-bit
Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.
Configuring devices.
SUNW-MSG-ID: SUNOS-8000-0G, TYPE: Error, VER: 1, SEVERITY: Major
EVENT-TIME: 0x5075a820.0x8f97a90 (0x1693e68979)
PLATFORM: i86pc, CSN: -, HOSTNAME:
SOURCE: SunOS, REV: 5.10 Generic_147441-01
DESC: Errors have been detected that require a reboot to ensure system
integrity. See http://www.sun.com/msg/SUNOS-8000-0G for more information.
AUTO-RESPONSE: Solaris will attempt to save and diagnose the error telemetry
IMPACT: The system will sync files, save a crash dump if needed, and reboot
REC-ACTION: Save the error summary below in case telemetry cannot be saved
panic[cpu0]/thread=fffffe80000b3c60: pcieb-7: PCI(-X) Express Fatal Error. (0x4)
fffffe80000b3bf0 pcieb:pcieb_intr_handler+1ea ()
fffffe80000b3c40 unix:av_dispatch_autovect+78 ()
fffffe80000b3c50 unix:intr_thread+5f ()
syncing file systems... done
ereport.io.pci.fabric ena=1693e6221600001 detector=[ version=0 scheme="dev"
device-path="/pci@19,0/pci8086,3410@9" ] bdf=2048 device_id=3410 vendor_id=
8086 rev_id=22 dev_type=40 pcie_off=90 pcix_off=0 aer_off=100 ecc_ver=0
pci_status=10 pci_command=47 pci_bdg_sec_status=0 pci_bdg_ctrl=3 pcie_status=6
pcie_command=7 pcie_dev_cap=8021 pcie_adv_ctl=5 pcie_ue_status=4020
pcie_ue_mask=100000 pcie_ue_sev=62030 pcie_ue_hdr0=0 pcie_ue_hdr1=0
pcie_ue_hdr2=0 pcie_ue_hdr3=0 pcie_ce_status=0 pcie_ce_mask=0
pcie_ue_tgt_trans=0 pcie_ue_tgt_addr=0 pcie_ue_tgt_bdf=ffff pcie_rp_status=0
pcie_rp_control=0 pcie_adv_rp_status=7c pcie_adv_rp_command=7
pcie_adv_rp_ce_src_id=2048 pcie_adv_rp_ue_src_id=2048 remainder=0 severity=44
skipping system dump - no dump device configured
rebooting...
Any ideas?

Sometimes, it's just easier and faster
to just start all over and re-install,
particularly when you have only a fresh install on your system.
This time, do not choose to include all the optional "documentation"
(that's what is held on CD5).
I have never found a reason to ever read that documentation so I stopped installing it.
... or you could download and burn a copy of CD5 and use it when prompted.

Solaris 8 installation problems

Hello,
I'm trying to install Solaris 2.8 on a Compaq server.
I have the tree cd's downloaded from your site.
config: internal ultra scsi 2 ctrlr with 1 * 18gb H/D
internal ide ctrlr with cd drive and diskette drive
In both ways , i do an update driver to recognize the internal H/D .(F4 menu at first screen)
1.When i tried to boot from Installation cd , I've a message saying : no disks that meet the criteria in the Solaris installer documentation found !! (but the disk is present when i do a format cmd and i don't know which criterias are needed ?
2.When i tried to boot on software cd 1 , i can load the software on the disk, but after that, the installer ask me to put the diskette labeled CPQNCR26350 in the diskette drive .
I put the diskette in the drive (the previously used diskette i use to update drivers at first screen) but the program said : driver cpqncr not on diskette ??
I'm sure it's the correct one .
Can anybody help me ?
Thanks for answer !!

Thanks for answer.
I've tried this m�thod:
1. Booting from dca diskette
2. Updating drivers with DU diskette (cpqncr.itu,smartii;itu,cpqfcs.itu,cpqary2.itu)
3. Continuing using cdrom 1 of 2 in interactive mode.
After that i've the message :
Solaris 8 s/w installation succeeded
Customizing system files --> ok
Customizing system devices --> ok
Installing boot information --> ok
Installing unbundled device driver support
Extracting driver list from tree ..
CPQNCR26350 drv/cpqncr
Please insert the DU diskette labeled CPQNCR26350
Press <ENTER> when ready
... I insert the diskette here ... and --> following message appears :
Driver cpqncr not on diskette
What's wrong ?
The only things I've seen is :
When i've construct the 4 DU diskettes, when QRST5.EXE has been executed to make the 4 disks, the messages on screen was :
Compaq Solaris DU diskette for Solaris 2.6 !!!!! and also in the readme files on DU diskette, 2.6 appears, but these drivers have been take from Solaris 2.8 link !!!
Perhaps it's the reason it doesn't see it as the correct drivers ?
Do you have other link to download the drivers ?
Thanks for your support.

Installation problem on Intel

I have tried to install Solaris 8 on my Dell machine.
I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
The first screen says this....
SunOS Secondary Boot version 3.00
WARNING: ACPI Tables not in Reclaim Memory
prom_panic: kmem_free block already free
Entering boot debugger:
[130ee5]:
and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
I don't know what the ACPI tables are .. and how i can fix this...
Anyone who knows this... please help..
Thanx a lot..

I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

Oracle8.1.5 installation problem on Solaris2.6

I am trying to install oracle 8.1.5 on Sun Solaris 2.6
system using OUI. During the installation and while creating
the database using DB configuration assistant, I am getting
the error message:
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java)
at WizOSD.DBQueryAvailableRAM(WizOSD.java:245)
at CheckerClass.CheckAvailableRAM(CheckerClass.java:475)
at CheckerClass.DetectAll(CheckerClass.java:62)
at DBConfigInfo_base.<init>(DBConfigInfo_base.java:901)
at DBConfigInfo.<init>(DBConfigInfo.java:44)
at DBCreateWizard.<init>(DBCreateWizard.java:414)
at DBCreateWizard.main(DBCreateWizard.java:1075)
any suggestion
thanks a lot
larry([email protected])

good gracious, Chris ...
okay, try applying the general advice on installation problems given here:
http://docs.info.apple.com/article.html?artnum=93976
... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
http://consumer.installshield.com/faq.asp#ts
keep us posted.
love, b

X86 installation problems.

Hardware: Asus motherboard MP NPV VM with Nvidea graphics, Amd x2 3600 processor
Installed Version Solaris 10 11/06 update
Problems: 1) Network card was not detected. So Internet can't be configured. 2) Display resolution problems with some monitors - some had maximum resolution that can't be changed at 480x600 in some the resolution was a little better but now on a samptron monitor the resolution is 1024x800. 3) The cursor of the mouse becomes invisible when logged out and logged back in or when restarted (instead of shut down) 4) Star office instalation started displaying errors - the installation progressed well upto 50% stage, but after that over a hundred files could not be installed
The following is the output of the prtconf -v :
System Configuration: Sun Microsystems i86pc
Memory size: 479 Megabytes
System Peripherals (Software Nodes):
i86pc
System properties:
name='acpi-status' type=int items=1
value=00000013
name='relative-addressing' type=int items=1
value=00000001
name='MMU_PAGEOFFSET' type=int items=1
value=00000fff
name='MMU_PAGESIZE' type=int items=1
value=00001000
name='PAGESIZE' type=int items=1
value=00001000
name='biosdev-0x80' type=byte items=588
value=01.eb.04.4d.33.2e.30.fa.fc.be.00.7c.bf.00.06.8c.c8.8e.d0.89.f4.8e.c0.8e.d8.51.b9.00.01.f3.a5.59.e9.00.8a.fb.b4.02.cd.16.24.03.3c.03.75.05.c6.06.61.07.01.bb.be.07.b9.04.00.80.3f.80.74.0e.83.c3.10.e2.f6.bd.75.07.b9.13.00.e9.e6.00.b4.00.cd.13.53.b4.41.bb.aa.55.b9.00.00.cd.13.72.3f.81.fb.55.aa.75.39.f7.c1.01.00.74.33.bd.a4.07.b9.03.00.e8.c8.00.5b.53.b9.05.00.66.6a.00.66.ff.77.08.66.ff.36.5c.07.6a.01.6a.10.b4.42.89.e6.cd.13.9f.83.c4.10.9e.73.7b.b4.00.cd.13.e2.dd.eb.6b.bd.a7.07.b9.03.00.e8.95.00.5b.53.8a.16.60.07.b4.08.cd.13.73.08.bd.62.07.b9.13.00.eb.79.88.c8.24.3f.a2.59.07.fe.c6.f6.e6.a3.5a.07.8b.47.08.8b.57.0a.f7.36.5a.07.89.c3.89.d0.f6.36.59.07.fe.c4.30.c9.88.fd.c1.e9.02.80.e1.c0.08.e1.88.dd.88.c6.8a.16.60.07.c4.1e.5c.07.be.05.00.b8.01.02.cd.13.73.12.b4.00.cd.13.4e.83.fe.00.75.ef.bd.88.07.b9.0e.00.eb.23.bb.00.7c.81.bf.fe.01.55.aa.74.08.bd.96.07.b9.0b.00.eb.10.8a.16.60.07.5e.66.ff.16.5c.07.bd.a1.07.b9.03.00.bb.4f.00.e8.0c.00.cd.18.80.3e.61.07.00.74.18.bb.1f.00.60.b8.01.13.ba.00.17.cd.10.b0.07.b9.01.00.cd.10.b4.00.cd.16.61.c3.00.00.00.00.7c.00.00.80.00.43.61.6e.27.74.20.72.65.61.64.20.67.65.6f.6d.65.74.72.79.4e.6f.20.61.63.74.69.76.65.20.70.61.72.74.69.74.69.6f.6e.43.61.6e.27.74.20.72.65.61.64.20.50.42.52.42.61.64.20.50.42.52.20.73.69.67.21.21.21.4c.42.41.43.48.53.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.80.00.01.01.bf.fe.ff.ff.c1.3e.00.00.00.4c.a1.12.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.55.aa.01.1e.00.00.00.ff.3f.00.00.10.00.00.00.3f.00.00.00.b0.9e.a1.12.00.00.00.00.00.02.b0.96.00.f0.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00
name='kbd-type' type=string items=1
value='US-English'
name='ata-dma-enabled' type=string items=1
value='1'
name='atapi-cd-dma-enabled' type=string items=1
value='0'
name='ttyb-rts-dtr-off' type=string items=1
value='false'
name='ttyb-ignore-cd' type=string items=1
value='true'
name='ttya-rts-dtr-off' type=string items=1
value='false'
name='ttya-ignore-cd' type=string items=1
value='true'
name='ttyb-mode' type=string items=1
value='9600,8,n,1,-'
name='ttya-mode' type=string items=1
value='9600,8,n,1,-'
name='lba-access-ok' type=string items=1
value='1'
name='prealloc-chunk-size' type=string items=1
value='0x2000'
name='bootpath' type=string items=1
value='/pci@0,0/pci-ide@e/ide@0/cmdk@0,0:a'
name='console' type=string items=1
value='text'
name='bootprog' type=string items=1
value='/platform/i86pc/multiboot'
name='boot-args' type=unknown items=1
value=00
name='ramdisk_start' type=int items=2
value=01034000.00000000
name='ramdisk_end' type=int items=2
value=055f1000.00000000
name='mfg-name' type=string items=1
value='i86pc'
name='impl-arch-name' type=string items=1
value='i86pc'
name='whoami' type=string items=1
value='/platform/i86pc/kernel/amd64/unix'
name='mmu-modlist' type=string items=1
value='mmu64'
Hardware properties:
name='bios-boot-device' type=string items=1
value='80'
name='stdout' type=int items=1
value=00000000
scsi_vhci, instance #0
System properties:
name='class' type=string items=1
value='root'
name='load-balance' type=string items=1
value='round-robin'
name='auto-failback' type=string items=1
value='enable'
Driver properties:
name='pm-want-child-notification?' type=boolean dev=none
name='initiator-interconnect-type' type=string items=1 dev=(174,0)
value='SPI'
name='scsi-selection-timeout' type=int items=1 dev=(174,0)
value=000000fa
name='scsi-options' type=int items=1 dev=(174,0)
value=00107ff8
name='scsi-watchdog-tick' type=int items=1 dev=(174,0)
value=0000000a
name='scsi-tag-age-limit' type=int items=1 dev=(174,0)
value=00000002
name='scsi-reset-delay' type=int items=1 dev=(174,0)
value=00000bb8
Device Minor Nodes:
dev=(174,0)
dev_path=/scsi_vhci:devctl
spectype=chr type=minor
isa, instance #0
Hardware properties:
name='bus-type' type=string items=1
value='isa'
name='device_type' type=string items=1
value='isa'
fdc, instance #0
Driver properties:
name='chip' type=int items=1 dev=none
value=00082077
Hardware properties:
name='dma-channels' type=int items=1
value=00000002
name='interrupts' type=int items=1
value=00000006
name='reg' type=int items=6
value=00000001.000003f0.00000006.00000001.000003f7.00000001
name='acpi-namespace' type=string items=1
value='\_SB_.PCI0.FDC0'
name='model' type=string items=1
value='PC standard floppy disk controller'
name='compatible' type=string items=1
value='PNP0700'
Register Specifications:
Bus Type=0x1, Address=0x3f0, Size=0x6
Bus Type=0x1, Address=0x3f7, Size=0x1
Interrupt Specifications:
Interrupt Priority=0x5 (ipl 5), vector=0x6 (6)
fd, instance #0
System properties:
name='mode_3D' type=int items=1
value=00000000
name='unit' type=int items=1
value=00000000
Driver properties:
name='ddi-kernel-ioctl' type=boolean dev=none
Device Minor Nodes:
dev=(36,0)
dev_path=/isa/fdc@1,3f0/fd@0,0:a
spectype=blk type=minor
dev_link=/dev/fd0a
dev_path=/isa/fdc@1,3f0/fd@0,0:a,raw
spectype=chr type=minor
dev_link=/dev/rfd0a
dev=(36,1)
dev_path=/isa/fdc@1,3f0/fd@0,0:b
spectype=blk type=minor
dev_link=/dev/fd0b
dev_path=/isa/fdc@1,3f0/fd@0,0:b,raw
spectype=chr type=minor
dev_link=/dev/rfd0b
dev=(36,2)
dev_path=/isa/fdc@1,3f0/fd@0,0:c
spectype=blk type=minor
dev_link=/dev/diskette
dev_link=/dev/diskette0
dev_link=/dev/fd0
dev_link=/dev/fd0c
dev_path=/isa/fdc@1,3f0/fd@0,0:c,raw
spectype=chr type=minor
dev_link=/dev/rdiskette
dev_link=/dev/rdiskette0
dev_link=/dev/rfd0
dev_link=/dev/rfd0c
asy, instance #0 (driver not attached)
System software properties:
name='interrupt-priorities' type=int items=1
value=0000000c
Hardware properties:
name='interrupts' type=int items=1
value=00000004
name='reg' type=int items=3
value=00000001.000003f8.00000008
name='acpi-namespace' type=string items=1
value='\_SB_.PCI0.UAR1'
name='model' type=string items=1
value='16550A-compatible COM port'
name='compatible' type=string items=1
value='PNP0501'
Register Specifications:
Bus Type=0x1, Address=0x3f8, Size=0x8
Interrupt Specifications:
Interrupt Priority=0xc (ipl 12), vector=0x4 (4)
asy, instance #1 (driver not attached)
System software properties:
name='interrupt-priorities' type=int items=1
value=0000000c
Hardware properties:
name='interrupts' type=int items=1
value=00000003
name='reg' type=int items=3
value=00000001.000002f8.00000008
name='acpi-namespace' type=string items=1
value='\_SB_.PCI0.UAR2'
name='model' type=string items=1
value='16550A-compatible COM port'
name='compatible' type=string items=1
value='PNP0501'
Register Specifications:
Bus Type=0x1, Address=0x2f8, Size=0x8
Interrupt Specifications:
Interrupt Priority=0xc (ipl 12), vector=0x3 (3)
lp (driver not attached)
Hardware properties:
name='interrupts' type=int items=1
value=00000007
name='reg' type=int items=3
value=00000001.00000378.00000008
name='acpi-namespace' type=string items=1
value='\_SB_.PCI0.LPT1'
name='model' type=string items=1
value='Standard LPT printer port'
name='compatible' type=string items=1
value='PNP0400'
i8042, instance #0
Hardware properties:
name='unit-address' type=string items=1
value='1,60'
name='interrupts' type=int items=2
value=00000001.0000000c
name='reg' type=int items=6
value=00000001.00000060.00000001.00000001.00000064.00000001
Register Specifications:
Bus Type=0x1, Address=0x60, Size=0x1
Bus Type=0x1, Address=0x64, Size=0x1
Interrupt Specifications:
Interrupt Priority=0x5 (ipl 5), vector=0x1 (1)
Interrupt Priority=0x5 (ipl 5), vector=0xc (12)
mouse, instance #0
Driver properties:
name='ddi-no-autodetach' type=int items=1 dev=none
value=00000001
Hardware properties:
name='device-type' type=string items=1
value='mouse'
name='reg' type=int items=1
value=00000001
name='interrupts' type=int items=1
value=0000000c
name='acpi-namespace' type=string items=1
value='\_SB_.PCI0.PS2M'
name='model' type=string items=1
value='PS/2 Port for PS/2-style Mice'
name='compatible' type=string items=1
value='pnpPNP,f03'
Device Minor Nodes:
dev=(116,0)
dev_path=/isa/i8042@1,60/mouse@1:l
spectype=chr type=minor
dev_link=/dev/kdmouse
dev=(116,1)
dev_path=/isa/i8042@1,60/mouse@1:internal_mouse
spectype=chr type=internal
Device Minor Layered Under:
mod=consms accesstype=chr
dev_path=/pseudo/consms@0
keyboard, instance #0
Driver properties:
name='ddi-no-autodetach' type=int items=1 dev=none
value=00000001
Hardware properties:
name='device-type' type=string items=1
value='keyboard'
name='interrupts' type=int items=2
value=00000001.0000000c
name='reg' type=int items=1
value=00000000
name='_CID' type=string items=1
value='PNP030B'
name='acpi-namespace' type=string items=1
value='\_SB_.PCI0.PS2K'
name='model' type=string items=1
value='IBM Enhanced (101/102-key, PS/2 mouse support)'
name='compatible' type=string items=1
value='pnpPNP,303'
Device Minor Nodes:
dev=(101,0)
dev_path=/isa/i8042@1,60/keyboard@0:kb8042
spectype=chr type=minor
Device Minor Layered Under:
mod=conskbd accesstype=chr
dev_path=/pseudo/conskbd@0
none (driver not attached)
Hardware properties:
name='interrupts' type=int items=1
value=0000000a
name='reg' type=int items=3
value=00000001.00000330.00000002
name='acpi-namespace' type=string items=1
value='\_SB_.PCI0.MIDI'
name='model' type=string items=1
value='Audio MIDI interface (MPU401 UART)'
name='compatible' type=string items=1
value='PNPB006'
joyst (driver not attached)
Hardware properties:
name='reg' type=int items=3
value=00000001.00000201.00000001
name='acpi-namespace' type=string items=1
value='\_SB_.PCI0.GAME'
name='model' type=string items=1
value='Game port (Joy stick)'
name='compatible' type=string items=1
value='PNPB02F'
motherboard (driver not attached)
Hardware properties:
name='reg' type=int items=45
value=00000000.000f0000.00004000.00000000.000f4000.00004000.00000000.000f8000.00004000.00000000.000fc000.00004000.00000000.1def0000.00010000.00000000.ffff0000.00010000.00000000.00000000.000a0000.00000000.00100000.1ddf0000.00000000.1df00000.02000000.00000000.fec00000.00001000.00000000.fee00000.00100000.00000000.fefff000.00001000.00000000.fff80000.00001000.00000000.fff90000.00030000.00000000.fffed000.00003000
name='acpi-namespace' type=string items=1
value='\_SB_.MEM_'
name='model' type=string items=1
value='Motherboard'
name='compatible' type=string items=1
value='PNP0C01'
pci, instance #0
Driver properties:
name='device_type' type=string items=1 dev=none
value='pciex'
Hardware properties:
name='ecfga-base-address' type=int64 items=1
value=00000000f0000000
name='available' type=int items=145
value=81000000.00000000.00000000.00000000.00000170.81000000.00000000.00000178.00000000.00000078.81000000.00000000.000001f8.00000000.0000017e.81000000.00000000.00000377.00000000.0000007f.81000000.00000000.000003f7.00000000.00000569.81000000.00000000.00000968.00000000.00000008.81000000.00000000.00000978.00000000.00000068.81000000.00000000.000009e8.00000000.00000008.81000000.00000000.000009f8.00000000.0000016a.81000000.00000000.00000b63.00000000.0000000f.81000000.00000000.00000b73.00000000.0000006f.81000000.00000000.00000be3.00000000.0000000f.81000000.00000000.00000bf3.00000000.0000400d.81000000.00000000.00004c80.00000000.00003380.81000000.00000000.0000c000.00000000.00000800.81000000.00000000.0000c808.00000000.000003f8.81000000.00000000.0000cc10.00000000.000013f0.81000000.00000000.0000e010.00000000.000013f0.81000000.00000000.0000f410.00000000.00000bf0.82000000.00000000.1df00000.00000000.00100000.82000000.00000000.20000000.00000000.c0000000.82000000.00000000.f4000000.00000000.07000000.82000000.00000000.fd000000.00000000.00800000.82000000.00000000.fd900000.00000000.00200000.82000000.00000000.fdd00000.00000000.00100000.82000000.00000000.fdf00000.00000000.00124000.82000000.00000000.fe028000.00000000.00003000.82000000.00000000.fe02e100.00000000.00000f00.82000000.00000000.fe030000.00000000.00bd0000
name='bus-range' type=int items=2
value=00000000.00000004
name='compatible' type=string items=1
value='pciex_root_complex'
name='device_type' type=string items=1
value='pciex'
name='reg' type=int items=3
value=00000000.00000000.00000000
name='#size-cells' type=int items=1
value=00000002
name='#address-cells' type=int items=1
value=00000003
Register Specifications:
Bus Type=0x0, Address=0x0, Size=0x0
Device Minor Nodes:
dev=(183,255)
dev_path=/pci@0,0:devctl
spectype=chr type=minor
dev=(183,253)
dev_path=/pci@0,0:reg
spectype=chr type=minor
dev=(183,252)
dev_path=/pci@0,0:intr
spectype=chr type=minor
pci1043,81c0 (driver not attached)
Hardware properties:
name='reg' type=int items=5
value=00000000.00000000.00000000.00000000.00000000
name='compatible' type=string items=7
value='pci10de,2f0.1043.81c0.a2' + 'pci10de,2f0.1043.81c0' + 'pci1043,81c0' + 'pci10de,2f0.a2' + 'pci10de,2f0' + 'pciclass,050000' + 'pciclass,0500'
name='model' type=string items=1
value='Ram'
name='power-consumption' type=int items=2
value=00000001.00000001
name='66mhz-capable' type=boolean
name='fast-back-to-back' type=boolean
name='devsel-speed' type=int items=1
value=00000000
name='max-latency' type=int items=1
value=00000000
name='min-grant' type=int items=1
value=00000000
name='subsystem-vendor-id' type=int items=1
value=00001043
name='subsystem-id' type=int items=1
value=000081c0
name='unit-address' type=string items=1
value='0'
name='class-code' type=int items=1
value=00050000
name='revision-id' type=int items=1
value=000000a2
name='vendor-id' type=int items=1
value=000010de
name='device-id' type=int items=1
value=000002f0
pci1043,81c0 (driver not attached)
Hardware properties:
name='reg' type=int items=5
value=00000100.00000000.00000000.00000000.00000000
name='compatible' type=string items=7
value='pci10de,2fa.1043.81c0.a2' + 'pci10de,2fa.1043.81c0' + 'pci1043,81c0' + 'pci10de,2fa.a2' + 'pci10de,2fa' + 'pciclass,050000' + 'pciclass,0500'
name='model' type=string items=1
value='Ram'
name='power-consumption' type=int items=2
value=00000001.00000001
name='66mhz-capable' type=boolean
name='devsel-speed' type=int items=1
value=00000000
name='max-latency' type=int items=1
value=00000000
name='min-grant' type=int items=1
value=00000000
name='subsystem-vendor-id' type=int items=1
value=00001043
name='subsystem-id' type=int items=1
value=000081c0
name='unit-address' type=string items=1
value='0,1'
name='class-code' type=int items=1
value=00050000
name='revision-id' type=int items=1
value=000000a2
name='vendor-id' type=int items=1
value=000010de
name='device-id' type=int items=1
value=000002fa
pci1043,81c0 (driver not attached)
Hardware properties:
name='reg' type=int items=5
value=00000200.00000000.00000000.00000000.00000000
name='compatible' type=string items=7
value='pci10de,2fe.1043.81c0.a2' + 'pci10de,2fe.1043.81c0' + 'pci1043,81c0' + 'pci10de,2fe.a2' + 'pci10de,2fe' + 'pciclass,050000' + 'pciclass,0500'
name='model' type=string items=1
value='Ram'
name='power-consumption' type=int items=2
value=00000001.00000001
name='66mhz-capable' type=boolean
name='devsel-speed' type=int items=1
value=00000000
name='max-latency' type=int items=1
value=00000000
name='min-grant' type=int items=1
value=00000000
name='subsystem-vendor-id' type=int items=1
value=00001043
name='subsystem-id' type=int items=1
value=000081c0
name='unit-address' type=string items=1
value='0,2'
name='class-code' type=int items=1
value=00050000
name='revision-id' type=int items=1
value=000000a2
name='vendor-id' type=int items=1
value=000010de
name='device-id' type=int items=1
value=000002fe
pci1043,81c0 (driver not attached)
Hardware properties:
name='reg' type=int items=5
value=00000300.00000000.00000000.00000000.00000000
name='compatible' type=string items=7
value='pci10de,2f8.1043.81c0.a2' + 'pci10de,2f8.1043.81c0' + 'pci1043,81c0' + 'pci10de,2f8.a2' + 'pci10de,2f8' + 'pciclass,050000' + 'pciclass,0500'
name='model' type=string items=1
value='Ram'
name='power-consumption' type=int items=2
value=00000001.00000001
name='66mhz-capable' type=boolean
name='fast-back-to-back' type=boolean
name='devsel-speed' type=int items=1
value=00000000
name='max-latency' type=int items=1
value=00000000
name='min-grant' type=int items=1
value=00000000
name='subsystem-vendor-id' type=int items=1
value=00001043
name='subsystem-id' type=int items=1
value=000081c0
name='unit-address' type=string items=1
value='0,3'
name='class-code' type=int items=1
value=00050000
name='revision-id' type=int items=1
value=000000a2
name='vendor-id' type=int items=1
value=000010de
name='device-id' type=int items=1
value=000002f8
pci1043,81c0 (driver not attached)
Hardware properties:
name='reg' type=int items=5
value=00000400.00000000.00000000.00000000.00000000
name='compatible' type=string items=7
value='pci10de,2f9.1043.81c0.a2' + 'pci10de,2f9.1043.81c0' + 'pci1043,81c0' + 'pci10de,2f9.a2' + 'pci10de,2f9' + 'pciclass,050000' + 'pciclass,0500'
name='model' type=string items=1
value='Ram'
name='power-consumption' type=int items=2
value=00000001.00000001
name='66mhz-capable' type=boolean
name='fast-back-to-back' type=boolean
name='devsel-speed' type=int items=1
value=00000000
name='max-latency' type=int items=1
value=00000000
name='min-grant' type=int items=1
value=00000000
name='subsystem-vendor-id' type=int items=1
value=00001043
name='subsystem-id' type=int items=1
value=000081c0
name='unit-address' type=string items=1
value='0,4'
name='class-code' type=int items=1
value=00050000
name='revision-id' type=int items=1
value=000000a2
name='vendor-id' type=int items=1
value=000010de
name='device-id' type=int items=1
value=000002f9
pci1043,81c0 (driver not attached)
Hardware properties:
name='reg' type=int items=5
value=00000500.00000000.00000000.00000000.00000000
name='compatible' type=string items=7
value='pci10de,2ff.1043.81c0.a2' + 'pci10de,2ff.1043.81c0' + 'pci1043,81c0' + 'pci10de,2ff.a2' + 'pci10de,2ff' + 'pciclass,050000' + 'pciclass,0500'
name='model' type=string items=1
value='Ram'
name='power-consumption' type=int items=2
value=00000001.00000001
name='66mhz-capable' type=boolean
name='fast-back-to-back' type=boolean
name='devsel-speed' type=int items=1
value=00000000
name='max-latency' type=int items=1
value=00000000
name='min-grant' type=int items=1
value=00000000
name='subsystem-vendor-id' type=int items=1
value=00001043
name='subsystem-id' type=int items=1
value=000081c0
name='unit-address' type=string items=1
value='0,5'
name='class-code' type=int items=1
value=00050000
name='revision-id' type=int items=1
value=000000a2
name='vendor-id' type=int items=1
value=000010de
name='device-id' type=int items=1
value=000002ff
pci1043,81c0 (driver not attached)
Hardware properties:
name='reg' type=int items=5
value=00000600.00000000.00000000.00000000.00000000
name='compatible' type=string items=7
value='pci10de,27f.1043.81c0.a2' + 'pci10de,27f.1043.81c0' + 'pci1043,81c0' + 'pci10de,27f.a2' + 'pci10de,27f' + 'pciclass,050000' + 'pciclass,0500'
name='model' type=string items=1
value='Ram'
name='power-consumption' type=int items=2
value=00000001.00000001
name='66mhz-capable' type=boolean
name='devsel-speed' type=int items=1
value=00000000
name='max-latency' type=int items=1
value=00000000
name='min-grant' type=int items=1
value=00000000
name='subsystem-vendor-id' type=int items=1
value=00001043
name='subsystem-id' type=int items=1
value=000081c0
name='unit-address' type=string items=1
value='0,6'
name='class-code' type=int items=1
value=00050000
name='revision-id' type=int items=1
value=000000a2
name='vendor-id' type=int items=1
value=000010de
name='device-id' type=int items=1
value=0000027f
pci1043,81c0 (driver not attached)
Hardware properties:

hi Sivasubramanian,
as i'm on a vacation in San Francisco (i'm writing this on my Cingular 8525 Windows Pocket PC 5) I won't be able to take a look at the
report...(my email is jags_fl at yahoo dot com) but after u ran installation check tool did u look at the results? check for those 'Y' & 'N' as showed on following page:
http://www.sun.com/bigadmin/hcl/hcts/install_check.html
u would be able to see urself if any hardware is not compatible (at the end of installation check tool)...
- Jags Desai

Installation problems in Compaq Presario V2617LA Laptop

Hello,
I am new in all of this Unix-Linux world and I need some help, here's my problem:
I have already partitioned and prepared my HDD to install Solaris, Windows and maybe Fedora (if someone recommends a better Linux it'll be appreciated), all of those three partitions perfectly identified and ready for the OS (it happens that I learn quickly, but I'm still new on this). I perfectly pass all Solaris 10 11/06 installation windows and requirements and Solaris begins installation, BUT when it all looks great, the installation (progress bar) just stops moving having 209.29 MBytes remaining and installing the 'Solstice Enterprise Agents 1.0.3 files for root file system', the wierdest thing is that the little slash-dash at the end is still turning around, the working processor light is on and nothing freezes (except when I navigate through the menu options), I have waited for a whole day and the installation does not finish and even re-downloaded Solaris and burn the image again two times and nothing.
Could it be a hardware compatibility problem? What do you think?
My Laptop specs are the following:
Product Name      Compaq Presario V2617LA
Product Number      EW998LA#ABM (Spanish version)
Microprocessor      1.8 GHz Mobile AMD Sempron� Processor 3000+ with PowerNow!� Technology
Microprocessor Cache      128KB L2 Cache
Memory      512 MB 333 MHz DDR Dimm 2
Video Graphics      ATI RADEON XPRESS 200M IGP
Video Memory      128MB DDR (shared)
Hard Drive      60 GB 4200RPM
Multimedia Drive      DVD�R/RW and CD-RW Combo Drive with Double Layer support
Display      14.0� WXGA High-Definition BrightView Widescreen Display (1280 x 768)
Fax/Modem      High speed 56K modem
Network Card      10/100BASE-T Ethernet LAN (RJ-45 connector)
Wireless Connectivity      54g� 802.11b/g WLAN with 125HSM SpeedBooster support
Sound      Internal Speakers
Keyboard      101 key compatible
Pointing Device      Touch Pad with On/Off button and dedicated vertical and horizontal Scroll Up/Down pad
PC Card Slots
* 1 Type I/II 32-bit card bus (also support 16-bit)
External Ports
* 2 USB 2.0
* 1 VGA (15-pin)
* 1 RJ -11
* 1 RJ -45 (LAN)
* 1 headphone-out
* 1 microphone-in
* TV-Out (S-video)
Power
* 65W AC adapter
* 6-Cell Lithium-Ion (43Whr)
Thank you in advance!!

I `m sure that i completely uninstall it from the 1st laptop..
I don`t want to sight out from my desktop,the 1st laptop is in an...other country. [of course a friend of mine have it]
I mail to him to try to uninstall any files or something from there..
if i solve the problem i install to 2nd laptop

Solaris 10 U6 jumpstart installation always goes into interactive mode desp

While doing the Solaris 10 U6 jumpstart installation, it is going into interactive mode for netmask.
This is the sysidcfg file configuration being used :
bash-3.00# cat /export/home/iserver/jumpstart/donau1/sysidcfg
system_locale=en_US
name_service=none
network_interface=ce2
{hostname=donau1 netmask=255.255.252.0 ip_address=10.50.57.24 protocol_ipv6=no default_route=10.50.56.1}
security_policy=none
terminal=vt100
timezone="MET"
timeserver=10.50.57.214
nfs4_domain=dynamic
root_password=5YcgZqC0krYjo
bash-3.00#
Here the network interface specified is "ce2" and the netmask is as shown above. Still, we observe the problem all the times.
and I have seen the following messages on the screen
Attempting to configure interface ce3...
Skipped interface ce3
Attempting to configure interface ce2...
Configured interface ce2
ip_arp_done: init failed
ifconfig: setifflags: SIOCSLIFFLAGS: ce2: Cannot assign requested address
Attempting to configure interface ce1...
Skipped interface ce1
Attempting to configure interface ce0...
Skipped interface ce0
Reading ZFS config: done.
Setting up Java. Please wait...
Serial console, reverting to text install
Beginning system identification...
Searching for configuration file(s)...
Using sysid configuration file 10.50.57.214:/export/home/iserver/jumpstart/donau1/sysidcfg
Search complete.
Discovering additional network configuration...
Completing system identification...
after this it is going into interactive mode and prompting for netmask . After providing the netmask, installation goes through successfully.
so please suggest me some solution to avoid it going into interactive mode.

I have seen this too over the years and it ultimately comes down to something innate:
Here are a few suggestions:
1. Try and use interface ce0.
2. Check default route on both jumpstart server and client.
3. The arp cache may need to be flushed on the Jumpstart server.
4. Use snoop and see what happens during the actual RARPing phase between the server and host.
5. Switch the order in the sysid config file as indicated below:
system_locale=en_US
name_service=none
network_interface=ce2
{hostname=donau1 ip_address=10.50.57.24 netmask=255.255.252.0 protocol_ipv6=no default_route=10.50.56.1}
security_policy=none
terminal=vt100
timezone="MET"
timeserver=10.50.57.214
nfs4_domain=dynamic
root_password=*****************
Please note I blanked your root password. Let me know if this helps.

Installation problem jumpstart

Anyone know whats going on here:
solaris version is 11/06 solaris 10. machine is V245
From the console ran:
boot net -v - install(snipped)
SUNWqusu.........................done. 6.97 Mbytes remaining.
SUNWrcmdr........................done. 6.89 Mbytes remaining.
SUNWrge..........................done. 6.78 Mbytes remaining.
SUNWrmodu........................done. 6.75 Mbytes remaining.
SUNWroute........................done. 6.42 Mbytes remaining.
SUNWrpcib........................done. 6.27 Mbytes remaining.
SUNWsolnm........................done. 6.25 Mbytes remaining.
SUNWsndmr........................done. 5.33 Mbytes remaining.
SUNWsndmu........................done. 2.60 Mbytes remaining.
SUNWsshcu........................done. 2.16 Mbytes remaining.
SUNWsshdr........................done. 2.10 Mbytes remaining.
SUNWsshdu........................done. 1.68 Mbytes remaining.
SUNWsshr.........................done. 1.57 Mbytes remaining.
SUNWsshu.........................done. 1.00 Mbytes remaining.
Completed software installation
Solaris 10 software installation partially failed
Solaris 10 packages partially installed
SUNWcsr
SUNWckr
SUNWtftpr
SUNWib
SUNWtavor
SUNWudapltr
SUNWaudd
SUNWusb
SUNWuedg
SUNWugen
SUNWuksp
SUNWuprl
SUNWxge
SUNWmdr
SUNWmdu
SUNWced
SUNWbsr
SUNWintgige
SUNWjfca
SUNWbindr
SUNWchxge
SUNWnfssr
SUNWfctl
SUNWemlxs
SUNWpd
SUNWfcip
SUNWfcp
SUNWfcsm
SUNWged
SUNWqfed
SUNWqlc
SUNWqus
SUNWrge
SUNWrpcib
SUNWsndmr
Customizing system files
- Mount points table (/etc/vfstab)
ERROR: Could not open file (/a/etc/vfstab)
ERROR: Could not create the file system mount table (/etc/vfstab)
ERROR: System installation failed
Solaris installation program exited.

I've just run into a very similar problem with a Solaris 10 11/06 installation on a V245. The post-installation messages had this warning:
Solaris 10 software installation partially failed
Solaris 10 packages partially installed
SUNWckr
and the initial boot failed with the following error messages:
boot: cannot find misc/sparcv9/krtld
boot: error loading interpreter (misc/sparcv9/krtld)
Elf64 read error.
boot failed
Enter filename [platform/sun4u/kernel/sparcv9/unix]:
Elf64 read error.
boot failed
Enter filename [platform/sun4u/kernel/sparcv9/unix]:
Alloc of 0x400000 bytes at 0x1000000 refused.
Elf64 read error.
boot failed
Enter filename [platform/sun4u/kernel/sparcv9/unix]:
Were you able to resolve your problem, and if so, any clues?
Thanks.

Sun, take responsibility for appserver7 installation problems!

*** First set of problems...
I'm having installation problems on both Solaris 8, (Ultra 480, 1GB RAM, latest recommended patches) and a Windows 2000 Server with SP2 (1GHz P4, 512MB RAM).
I chose default installation directory and then the install
complains that Pointbase 4.2 should be installed into the
same directory etc. Cannot unselect the Sample apps and
Pointbase options.
*** Second problem...
I have an instance previously installed on Windows 2000
Professional with SP2.(1GHz PIII, 512MB RAM, 5GB space)
When i start application server 7.0 , then i get the following
message:
Could not start the instance: domain1:admin-server
Server failed to start:abnormal subprocess termination
Could not start the instance: domain1:server1
Server failed to start: abnormal subprocess termination
Could not start one or more instances in the domain:domain1
Could not start one or more domains
Press any key to continue ...

When you say that you choose the default installation directory and then the installer complained about Pointbase, what platform where you using? Had you already attempted installs in the past or uninstallations that did not complete properly?
For your second issue, did you happen to change the host name of your machine? Try cranking up the log level (edit server.xml) to see what's causing the instances to fail on startup. Did the application ever start up after install? What things did you do just prior to the server exhibiting this behaviour?

Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

Help!
I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
HpSdpAppCoreApp
"The feature you are trying to use in on a network resource that is unavailable.
Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
The last time I dug through some files on my own, bad things happened.
Thanks,
C

good gracious, Chris ...
okay, try applying the general advice on installation problems given here:
http://docs.info.apple.com/article.html?artnum=93976
... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
http://consumer.installshield.com/faq.asp#ts
keep us posted.
love, b

Installation problem on SUSE 12.1

Hi
I'm a Linux beginner and I am trying to install LV on SUSE 12.1
I've also posted my problems on Lava:
http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
Any ideas?
Is there a way to debug to see what's going on?
Cheers,
Mike
Solved!
Go to Solution.

Hi Mike,
Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest.
Best,
Dan N
Applications Engineer
National Instruments

Solaris 10 11/06 installation problem?

Similar Messages

Maybe you are looking for