Solaris 10 11/06 SXCR booting from USB-DVDROM is OK!!

Hi!!
I confirm that SXCR 11/06 is able to installing from a USB-DVDROM!!
Yesterday I can install Solaris 10 in my Thinkpad X40 with no problems.
I have posted this because many people is asking for install with this method in other forums
Cheers!

/sbin/installgrub -m /boot/grub/stage1 /boot/grub/stage2 /dev/dsk/c0d0s0 --> is this a typeo ?
if not, you should have used the raw device name!
type "/dev/rdsk/c0d0s0" instead of "/dev/dsk/c0d0s0"

Similar Messages

  • Can Solaris 10 boot from USB devices like USB thumb?

    1. Any live CD build for Solaris 10? That's the one which can boot up from CD and run immediately.
    No installation requirement.
    2. Can Solaris 10 boot from USB devices like USB thumb?

    You can find "live" CD and DVD images at OpenSolaris site: www.genunix.org/distributions/belenix_site. This OSolaris version is booted from CD/DVD drive and can be permanently installed on HD drive. Moreover You can find at this site suitable script for USB thumb preparation. However You should remember that the number of read/writes on USB thumb is limited (ca 400 and slightly more in more expensive versions).
    Good luck.

  • ThinkCentre m58 did not start booting from usb!!

    heloo ..
    i have ThinkCentre m58 , i tray to format it by usb bootable windows but the pc did not start booting from usb!!
    my usb have windows insid it.

    Thanks for your effort!!
    I deleted solaris and I'll continue to use Debian

  • Multiple errors attempting to capture a Windows 8 reference image after booting from USB (Dell Latitude 10)

    From results.xml:
    <?xml version="1.0"?>
    <Results><Errors>8</Errors><Warnings>0</Warnings><RetVal>-2147467259</RetVal><DeploymentType>CUSTOM</DeploymentType><Messages><![CDATA[FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.
    Litetouch deployment failed, Return Code = -2147467259 0x80004005
    Failed to run the action: Apply Windows PE.
    Unknown error (Error: 00001550; Source: Unknown)
    The execution of the group (Capture Image) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows)
    Failed to run the last action: Apply Windows PE. Execution of task sequence failed.
    Unknown error (Error: 00001550; Source: Unknown)
    Task Sequence Engine failed! Code: enExecutionFail
    Task sequence execution failed with error code 80004005
    Error Task Sequence Manager failed to execute task sequence. Code 0x80004005]]></Messages></Results>
    I have not only regenerated my boot files while updating my deployment share, I have completely rebuilt the MDT 2012 deployment share from scratch, and I'm still getting the exact same errors. I can't figure out what is causing this. The only hits for these
    errors seemed to say that the -214... error is likely related to a missing file, but I don't know how to figure out what that might be. I don't know what the FAILURE ( 5456 ) could be caused by, either, although it seems to be related to not knowing what partition
    should be imaged or imaged to. I haven't been able to find any reference to MDT needing a partition to image from/to set in a CS.ini property or in a task variable.
    I am running a modified version of the Sysprep and Capture Task Sequence (set up as described at http://bjtechnews.org/2012/06/01/mdt-2012-capturing-a-reference-image-part-ii/, it's basically the default settings for that TS with the sysprep step disabled and
    the "Set Image Folder" task variable created per that post--I ran sysprep myself, manually, on the machine before shutting it down to boot from USB) after booting a Dell Latitude 10 tablet from a USB drive created by extracting the contents of the
    MDT 2012 DeploymentShare$\Boot\LiteTouchpe_x86.iso to a FAT32-formatted volume.

    Here is the second part of BDD.log:
    <![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Logs contained 8 errors and 0 warnings.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[No Windows PE image to delete.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Checking mapped network drive.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[testing drive Z: mapped to \\NCSD-WDS\DeploymentShare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Disconnecting drive Z: mapped to \\NCSD-WDS\DeploymentShare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[testing drive Y: mapped to \\ncsd-wds.ncsd.local\deploymentshare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Cleaning up C:\MININT directory.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="21:18:44.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Not Wizard = False]LOG]!><time="00:44:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WizardComplete is now = N]LOG]!><time="00:44:07.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[ Open Control File: TaskSequences]LOG]!><time="00:44:08.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[CleanStartItems Complete]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #2" \\MININT-IDKMK2C\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #1, Partition #0" \\MININT-IDKMK2C\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE1"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives = C:]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Not Wizard = False]LOG]!><time="00:54:54.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WizardComplete is now = N]LOG]!><time="00:54:55.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[ Open Control File: TaskSequences]LOG]!><time="00:54:56.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TaskSequenceID is now = CAPTURE001]LOG]!><time="00:55:00.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@type='BDD_InstallOS']]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@type='BDD_InstallOS'] = False]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Task Sequence does not contain an OS and does not contain a LTIApply.wsf step, possibly a Custom Step or a Client Replace.]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[DeploymentType = CUSTOM]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageProcessor is now = ]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property OSGUID is now = ]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TaskSequenceName is now = Capture reference image]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TaskSequenceVersion is now = 1.0]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TaskSequenceTemplate is now = CaptureOnly.xml]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property OSGUID is now = {9c976969-ab45-405b-82e7-d8a429228a67}]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageIndex is now = 1]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageSize is now = 7934]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageFlags is now = Professional]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageBuild is now = 6.2.9200.16384]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageProcessor is now = x86]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageLanguage001 is now = en-US]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[InstallFromPath: \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86\Sources\install.wim]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property InstallFromPath is now = \\ncsd-wds\latitude10deploy$\Operating Systems\Windows 8 Pro x86\sources\install.wim]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[SourcePath: \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property SourcePath is now = \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@type='BDD_InstallRoles']]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@type='BDD_InstallRoles'] = ]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@type='BDD_InstallApplication' and ./defaultVarList/variable[@name='ApplicationGUID'] and ./defaultVarList[variable='']]]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@type='BDD_InstallApplication' and ./defaultVarList/variable[@name='ApplicationGUID'] and ./defaultVarList[variable='']] = ]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@name='Create WIM']]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@name='Create WIM'] = True]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@name='Create WIM']]LOG]!><time="00:55:19.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@name='Create WIM'] = True]LOG]!><time="00:55:19.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Validating connection to \\NCSD-WDS\Latitude10Deploy$\Captures]LOG]!><time="00:55:32.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Already connected to server NCSD-WDS as that is where this script is running from.]LOG]!><time="00:55:33.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TSGuid is now = {ed8ed1ac-ab1a-448d-97b5-0d4cb1f7ef95}]LOG]!><time="00:55:38.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property OSGUID is now = ]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property DeploymentType is now = CUSTOM]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property DoCapture is now = YES]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ComputerBackupLocation is now = \\NCSD-WDS\Latitude10Deploy$\Captures]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property BackupFile is now = CAPTURE001.wim]LOG]!><time="00:55:40.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WizardComplete is now = Y]LOG]!><time="00:55:40.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Setting variable ComputerBackupLocation to value \\ncsd-wds.ncsd.local\Latitude10Deploy$\Captures]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Property ComputerBackupLocation is now = \\ncsd-wds.ncsd.local\Latitude10Deploy$\Captures]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:46.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Setting variable ImageBuild to value 6.2.9200]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Property ImageBuild is now = 6.2.9200]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:48.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Setting variable ImageFlags to value %OSSKU%]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Property ImageFlags is now = %OSSKU%]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:50.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Setting variable PHASE to value STATERESTORE]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Property PHASE is now = STATERESTORE]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:52.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[---------------- Initialization ----------------]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Validating connection to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Already connected to server NCSD-WDS as that is where this script is running from.]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[DestinationOSInstallType = BYDISKPARTITION]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Found: DestinationDisk: 0]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Found: DestinationPartition: 1]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No drive mapped to Disk Partition: \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Unable to yield a target Partition (Special Recovery option for Litetouch).]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[DestinationDisk and Partition did not yield a target Partition.]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Destination Logical Drive was not specificed, defaulting to #:\]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Looking for Sysprep.inf in #:\sysprep\Sysprep.inf]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[The sysprep.inf file was not found.]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Property OSDAnswerFilePathSysprep is now = ]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[The unattend.txt file was not found.]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Found unattend.xml at \\NCSD-WDS\Latitude10Deploy$\Control\CAPTURE001\Unattend.xml, will copy to C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Copied \\NCSD-WDS\Latitude10Deploy$\Control\CAPTURE001\Unattend.xml to C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Property OSDAnswerFilePath is now = C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Loaded C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for ComputerName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for FullName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for OrgName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for ProductKey]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for JoinDomain]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for MachineObjectOU]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for JoinWorkgroup]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for DomainAdmin]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for InputLocale]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Language]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for LanguageGroup]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for SystemLocale]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for TimeZone]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AutoLogon]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AutoLogonCount]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for BitsPerPel]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Xresolution]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Yresolution]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Vrefresh]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AreaCode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for CountryCode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Dialing]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for LongDistanceAccess]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Home_Page]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AutoMode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AutoUsers]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[//settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/UpgradeData/Upgrade not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for OSDComputerName]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for ProductKey]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed parent of //settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/UserData/ProductKey/Key from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-Shell-Setup"]/ProductKey from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for JoinDomain]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-UnattendedJoin"]/Identification/MachineObjectOU from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for JoinWorkgroup]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for DomainAdmin]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for DomainAdminDomain]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with InstallFromPath=\\ncsd-wds\latitude10deploy$\Operating Systems\Windows 8 Pro x86\sources\install.wim (value was .\Operating Systems\Windows 8 Pro x86\Sources\install.wim)]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[//settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/ImageInstall/OSImage/InstallFrom/MetaData[Key="/image/index"]/Value not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with ImageIndex=1 (value was 1)]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated PlainText entry to true.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated PlainText entry to true.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[//settings[@pass="oobeSystem"]/component[@name="Microsoft-Windows-Shell-Setup"]/UserAccounts/LocalAccounts not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Organization]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for FullName]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for BitsPerPel]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Xresolution]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Yresolution]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Vrefresh]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AreaCode]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for CountryCode]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for LongDistanceAccess]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for LongDistanceAccess]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-Shell-Setup"]/TimeZone from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed //settings[@pass="oobeSystem"]/component[@name="Microsoft-Windows-Shell-Setup"]/TimeZone from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for KeyboardLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for KeyboardLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UILanguage]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UILanguage]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Home_Page]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for OrgName]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for OrgName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for FullName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for FullName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with DestinationDisk=0 (value was 0)]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with DestinationPartition=1 (value was 1)]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Rewrote C:\MININT\Unattend.xml with changes]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[ZTIConfigure COMPLETED. Return Value = 0]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[ZTIConfigure processing completed successfully.]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Event 41001 sent: ZTIConfigure processing completed successfully.]LOG]!><time="00:56:05.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Will boot into Windows PE architecture x86 to match OS being deployed.]LOG]!><time="00:56:06.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[DestinationOSInstallType = BYDISKPARTITION]LOG]!><time="00:56:06.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Found: DestinationDisk: 0]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Found: DestinationPartition: 1]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[No drive mapped to Disk Partition: \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Unable to yield a target Partition (Special Recovery option for Litetouch).]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[DestinationDisk and Partition did not yield a target Partition.]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="3" thread="" file="LTIApply">
    <![LOG[Event 41002 sent: FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.]LOG]!><time="00:56:08.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Removing AutoAdminLogon registry entries]LOG]!><time="00:56:12.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="00:56:12.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Logs contained 8 errors and 0 warnings.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[No Windows PE image to delete.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Checking mapped network drive.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[testing drive Z: mapped to \\ncsd-wds.ncsd.local\deploymentshare$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[testing drive Y: mapped to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Disconnecting drive Y: mapped to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Cleaning up C:\MININT directory.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="00:56:15.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">

  • Can't boot from USB or DVD. HP Pavilion g6-2257sr

    My new notebook HP Pavilion g6-2257sr don't let me to boot from USB device. 
    When notebook's booting, I pressed ESC and F10. Then I set up UFEI boot order - USB-device / DVD / OS selector. 
    I use official Windows 7 disk, and several own USB devices with bootable images.
    But rebboting use hard drive's OS all the same.
    Please help. I want to delete current OS from my notebbok.
    This question was solved.
    View Solution.

    Hi:
    I would make a set of recovery disks first before proceeding.
    To boot the PC you need to go into the BIOS and enable legacy mode.
    Then you should be able to boot from another device.

  • How Can I boot from USB - Portege A200

    Hi,
    I've got an Portege A200 which is only a couple of years old but the hard drive no longer works. Initially I thought this was due to corrupting the boot record on the drive but after attempting to replace the hard drive (with two different drives) it is showing an IDE #0 error upon boot. I have therefore come to the conclusion the IDE controller chip has died.
    In order to get the latop working I burned a cd with the ubunto ISO. This boots ok but due to only have 512Mb RAM the system is somewhat limited and anything installed is lost everytime I reboot.
    I have now bought a 2Gb flash drive and installed ubuntu onto this. My next problem is that there appears to be no boot from USB HDD or USB Memory Stick option in the bios.
    The possible options that I can think of are:
    1) Upgade the bios so it supports boot from memory stick (although no HDD so not sure how I could reflash the BIOS or if there is even a BIOS upgrade that would support this functionality)
    2) Create a cd which starts the boot process then tells the system to continue booting from the usb drive (Is this possible and does anyone know where I might be able to obtain such software)
    3) Boot from CD but use the USB to retain any information saved / any installs etc (I guess similar to option 2 except the cd would manage the whole OS and the USB would just hold 'additional' information)
    If there are any other options that anyone can think of I am happy to give them a go. Seems a shame to have to chuck a laptop that isn't particularly old because the IDE controller chip has failed on the mobo.
    I apppriciate any help anyone can offer.
    Many thanks,
    Mark

    Hi
    First of all I have to say that its not possible to boot from the external USB device like the USB stick, USB CD/DVD drive or USB HDD.
    Its possible only to boot from the external USB FDD (diskette) drive
    However, not the booting possibilities are clear but I think you have misunderstood the IDE#0 error message. In m opinion the IDE controller is not faulty but only the new HDD is not compatible and not recognized by BIOS.
    There are different reasons for this issue
    Mostly this error message appears if the HDD master/slave/c-sel settings are not correct.
    Usually such settings dont need to be changed or switched on 2.5 HDDs but some HDDs support an jumper which must be set in the right position. But I dont if your HDD supports this
    Furthermore the not compatible HDD size could be the reason for such error messages!
    So finally I would recommend contacting the ASP in your country to get a new, compatible HDD and to check if the same error persists.
    Good luck

  • Satellite C50-A634 wont boot from USB or DVD

    My new toshiba Satellite C50-A634 wont boot from usb, or dvd ,
    i have downloaded win 8.1 and burn image to dvd but i still get an error message "no bootable device......please restart system" .
    Can some one plz help?

    Hi
    Does Satellite C50-A634 supports internal CD/DVD drive or did you try to boot from external optical disk drive?
    You have to know that _Satellite C50 & Satellite C50D models *without* a built-in ODD_ are not able to boot from an external ODD due to a technical limitation.
    Details here:
    [Limitation of external boot media for Satellite, Satellite Pro C50 & C50D devices|http://aps2.toshiba-tro.de/kb0/TSB3B03JA0000R01.htm]
    Only USB flash drives are supported as external boot devices!
    It is necessary you can use a USB flash drive as recovery media on notebooks without a built-in ODD.

  • Hp mini will not boot from usb and USB not listed as a choice

    I have an HP mini 110-1116NR and it crashed. During a system restore it stopped working so now there is no operating system on it.
    In BIOS there is no choice to boot from USB (when my disks come in mail from HP)
    Also when it kinda starts im at the DOS screen....system32.exe???????
    I dont know what this means

    Hi cathy69:
     Thank you for your inquiry.   I am pleased to assist you!
    I hope you had a great weekend!
    I see you are looking to change the boot order on your computer. Here is a link to 'Configuring the Boot Order in the System Bios" click here. Please let me know if you require further assistance.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Mobo Support for booting from USB hdd

    Hi,
    I have a K8N Diamond.
    How can I check whether my mobo can support booting from USB hdd?
    I know it can boot from the USB-CDROM.
    If not, do I need a bios update?

    Quote from: Stu on 21-January-08, 00:38:45
    How to identify your BIOS and m/b version
    But please don't go flashing your BIOS just for the sake of doing so.
    Your USB HDD will be listed under Hard Disks in BIOS, there won't be a USB-HDD option
    Wow, thanks for the link and the pointer. I've found out where the USB hdd is now.
    I won't flash my bios for the sake of that thanks to you, but I'm upgrading to a Dual-Core soon and I realised my bios is w7100nms v1.0.
    So I have to flash my bios soon. Any tips regarding this?

  • How to boot from usb flash drive on Satellite A500-o25

    How do you configure boot order on A500-o25 so that it boots from usb drive first.

    Hi,
    Enter the Bios, pressing F2 on startup, go to the Boot menu and choose Usb drive as the first boot device (you navigate with F5 and F6 keys). Press F10, and ..Save and Exit menu ,, appears, press ok. That's all.
    Note, on my satellite A500, I have to connect the Usb flash before to turn computer on, otherwise the usb flash drive doesn't appear in boot menu in Bios
    Message was edited by: Jeka-IL

  • How to boot from USB flash drive - Portege R500

    Hi,
    I have a Portege R500 running Windows XP, brought about 2 years ago, and recently contracted a worm virus that has infected some of the start up files as the minute I log in it logs out again, even in safe mode! Quickest way I can think of sorting it is to reformat it with the XP recovery disc and reinstall windows.
    Problem!! The CD/DVD drive on the laptop stopped working a while ago, have tried pretty much everything in the thread on this site but had no luck.
    So my plan was to boot from a USB flash drive and do it that way. However in the boot settings I only have the options of HDD / FDD / CD-ROM / LAN, neither of these will work. Does anyone know how to boot from USB flash drives?
    Any help would be really appreciated

    Hi
    As far as I know it should be possible to boot from USB FDD
    Im not sure if you would be able to boot from USB flash drive but its definitely worth a try
    Generally you could try to press F12 button when notebook powers up.
    Then a boot menu should appear on the display and you should see all bootable devices.
    PS: As far as I know the USB booting was available in ToshibaHWSetup (Toshiba tool which changes the BIOS settings in windows OS.) Therefore I assume booting from USB should be possible.
    Greets

  • Bootcamp woes, unable to boot from USB and DVD drive reads all DVDs blank

    My partner and I are completely unable to install Windows using Bootcamp.  We have tried dozens of solutions on the internet.
    2011 iMac (purchased in by me and my partner 2012) reads all DVDs as blank.  We have (hilariously) another Mac, an MBP, that has the same exact problem.  You'd almost think "Superdrives" eventually just stop working or something.  So obviously we can't install Bootcamp on the iMac using a DVD.
    But what about a USB stick?  Well after modifying the plist file and writing a bootable Windows USB and trying to boot from that, we were greeted with the mysterious and apparently yet-unsolved "no bootable device" error. 
    So our iMac can't boot from USB drives or read DVDs.  We've only owned it for two years.  And this is the second Mac we've owned where the Superdrive has died.  And we don't even use DVDs more than like once a year.
    But anyway, can someone tell me what we're supposed to do if we want to install Windows aside from throwing money away to buy another Superdrive that is probably going to die again in a year?  Maybe a way to make our mac boot from our USB stick?  Something?
    Thanks.

     Should you have another drive with a MBR, use it to rule that issue out. Alternatively create a GPT on the flash drive and try to boot from it.
     What options are there for the usb controller/boot priorities/order/options? Does the laptop recognize the usb flash when already in bios setup? Should there be any form of choosing the device to boot, use that with the flash drive in the socket, then switch it with the external drive.

  • [RESOLVED] "Isolinux.bin missing or corrupt" when booting from USB.

    Just giving root cause explanation and resolution to closed topic:
    https://bbs.archlinux.org/viewtopic.php?id=107241
    where "Isolinux.bin missing or corrupt" when booting from USB. I hope maybe someone will find it rather than closed topic 107241  :-(
    Windows DD and  unetbootin-windows are created for single ISO partition. That's why old Archlinux like 2010-05 will run.
    The newest one archlinux-2014.01.05-dual.iso will not work like that because there is UEFI pre-boot (two partitions). That's why it can't find then Isolinux.bin and report it's missing. Of course this kind of issue will appear on old motherboard without / old UEFI support as they can't understand bootstrap and real root fs later.
    unetbootin tool is partition driven so it can't do split well 32 UEFI + remaining root.
    Resolution:
    If you really don't have any Linux based machine to use Linux DD there is work around:
    1. Install WIndows Virutalbox and extension pack
    2. Download latest Archlinux ISO and run VM from it + USB support map real pendrive
    3. In guest VM booted form Arch ISO just run DD if=/dev/sr0 of=/dev/sda (pay attention that SDA is real USB device then).
    4. Wait about 8minutes. halt. unplug usb. Voila.
    Last edited by varsovie (2014-01-15 22:20:37)

    I am having this exact problem but with dd on Ubuntu 12.04 (my main distro on my main machine).
    Perhaps my version of dd is too old?

  • K7T Turbo2 - how do I tell BIOS to boot from USB?

    I have an old K7T Turbo2 system, and I'm trying to install Windows 7 on it.  I guess that's my first question - am I going to run into any nasty problems running W7 on this board, other than RAM limitations?  I have a version of "Tiny7" (which installs from CD-ROM) installed already and it seems fine, but I'd rather run a fuller non-pirated OS, and that means installing from a DVD/iso.  I don't have a DVD drive installed and it would be a bit of a pain to acquire one, so I'm hoping to boot from USB to winstall W7.
    I have a PCI USB2.0 card installed in the system, which seems to work fine.  I've set the BIOS to boot from USB-FDD (but I've also tried USB-CDROM and USB-ZIP).  I have BIOS 3.6.  I've tried booting from the PCI USB2.0 hub (will that ever work or does the BIOS not recognize it?) and from the regular USB1 port on the mobo (but my USB flash drive is USB2).
    Is there something else I need to do in the BIOS to get this to work?  Will it never work no matter what I do? 
    I read somewhere about a BIOS setting to "enable legacy USB support" but can't see anything like that in my BIOS settings. 
    Any suggestions?  (thanks in advance)

    If there is no option to boot from USB-HDD then it may never work.
    Long shot I know, but what if you connect your USB drive, then power on your system, and press F11 when the logo/POST screen appears, does the drive show in the Boot Menu that appears?
    Quote
    I don't have a DVD drive installed and it would be a bit of a pain to acquire one
    Really? DVD drives are very common, and cheap as chips! You can pick up a brand new DVD writer, for the price of a (good) DVD movie.
    http://www.newegg.com/Store/SubCategory.aspx?SubCategory=5&name=CD-DVD-Burners&Order=PRICE
    (Obviously, you'll need an IDE/EIDE type )

  • W520: Unable to boot from USB - device does not show up in boot menu

    I have a W520, and I am trying to boot from a USB key. The USB key is bootable, my old T61p boots just fine from it, and so does another computer I tried.
    The W520, after pressing F12 on power on, immediately shows the Intel PXE agent and then some blue boot menu, which only shows hard drive and LAN as available boot options.
    I have tried all three USB ports but the results are always the same - the USB device does not show up. Is there any trick or BIOS setting to enable boot from USB?
    Thanks,
        CS 

    Hello Neil
    Thanks for getting back to me
    The issue was that the usb drives were disabled in the bios from the  Startup menu.
    To enable
    1. Enter bios
    2. Select boot
    3. If you do not see the boot device you require use the down cursor key until the "Excluded from boot priority order" becomes visible.
    4. Select the device you require (in my case USB HDD)
    5. Save and exit.
    You can now boot from a usb stick and install the Linux distro of your choice :-)
    Cheers

Maybe you are looking for

  • Is it possible to edit the voice of a song created in Garage band?

    Hello to all! Using music tracks, I am singing songs in different languages using Garage band. After I import these songs into my FCPX projects, is it possible for me to break up the individual tracks [the music track apart and the voice track apart]

  • Using Albums in Iphoto 9

    How do I move an event to albums.  I have 536 photos downloaded and there must be a way to put them directly to an album?  Right now I am moving one photo at a time.  Thanks for the help.

  • Screen resolution on BT Yahoo browser

    My 'Windows Internet Explorer provided by Yahoo' (i.e. BT) browser has suddenly started displaying in a larger font as if the screen resolution has changed (images are also affected). No other application on my laptop is affected. I've tried changing

  • HP Pavilion Entertainm​ent PC ( KN895UA) - Blu-ray Drive not showing in My Computer

    Product Name: Pavilion dv9830us Entertainment Notebook PC Operating System: Windows 7 Home Edition 64-bit Description:  My Blu-ray drive isn't showing up in my computer.  When I go to device manager, the BD drive is there, but there is a yellow trian

  • Wont play digital movie

    i downloaded the digital copy of high school muscical 3 and bedtime stories.from I tunes for my I pod touch.they wont play all i get is a grey box and no picture.when i try and watch it on my I pod it stops playing after a few seconds.any ideas?