Solaris 10 5/08 x86 - Pseudocolor visual not available in xdpyinfo

Hello,
I am running Sol 10 5/08 x86 64-bit on a Dell Precision 690 wkstn with WinXP using VMware Workstation 6.0.4. I have a NVIDIA Quadro FX 3500 video card. I am not sure if this is really a VMware issue or one that can be solved using Solaris.
I need to run "Xnest -depth 8 -class Pseudocolor," but my video setup, using the Xorg server (Xsun not supported by VMware Tools), does not support Pseudocolor visuals. Here is my xdpyinfo:
xdpyinfo
name of display: :0.0
version number: 11.0
vendor string: Sun Microsystems, Inc.
vendor release number: 10300000
maximum request size: 16777212 bytes
motion buffer size: 256
bitmap unit, bit order, padding: 32, LSBFirst, 32
image byte order: LSBFirst
number of supported pixmap formats: 7
supported pixmap formats:
depth 1, bits_per_pixel 1, scanline_pad 32
depth 4, bits_per_pixel 8, scanline_pad 32
depth 8, bits_per_pixel 8, scanline_pad 32
depth 15, bits_per_pixel 16, scanline_pad 32
depth 16, bits_per_pixel 16, scanline_pad 32
depth 24, bits_per_pixel 32, scanline_pad 32
depth 32, bits_per_pixel 32, scanline_pad 32
keycode range: minimum 8, maximum 255
focus: window 0x1e0000a, revert to Parent
number of extensions: 37
BIG-REQUESTS
DAMAGE
DEC-XTRAP
DOUBLE-BUFFER
DPMS
Extended-Visual-Information
GLX
MIT-SCREEN-SAVER
MIT-SHM
MIT-SUNDRY-NONSTANDARD
RANDR
RECORD
RENDER
SECURITY
SGI-GLX
SHAPE
ST
SYNC
SolarisIA
TOG-CUP
VMWARE_CTRL
X-Resource
XAccessControlExtension
XC-APPGROUP
XC-MISC
XEVIE
XFIXES
XFree86-Bigfont
XFree86-DGA
XFree86-Misc
XFree86-VidModeExtension
XINERAMA
XINERAMA
XInputExtension
XKEYBOARD
XTEST
XVideo
default screen number: 0
number of screens: 1
screen #0:
dimensions: 1600x1200 pixels (542x406 millimeters)
resolution: 75x75 dots per inch
depths (7): 24, 1, 4, 8, 15, 16, 32
root window id: 0x3e
depth of root window: 24 planes
number of colormaps: minimum 1, maximum 1
default colormap: 0x20
default number of colormap cells: 256
preallocated pixels: black 0, white 16777215
options: backing-store NO, save-unders NO
largest cursor: 32x32
current input event mask: 0xfa2033
KeyPressMask KeyReleaseMask EnterWindowMask
LeaveWindowMask ButtonMotionMask StructureNotifyMask
SubstructureNotifyMask SubstructureRedirectMask FocusChangeMask
PropertyChangeMask ColormapChangeMask
number of visuals: 4
default visual id: 0x22
visual:
visual id: 0x22
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x23
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x24
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x25
class: TrueColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
Notice that only 4 TrueColor visuals are supported. Does anyone know how I can change my setup so that my Xserver supports a Pseudocolor visual? VMware Tools is very limited for Solaris, and it set up the Xserver for me.
Any help or advice anyone could provide would be greatly appreciated.
Thanks...

I installed the latest nvidia driver and ran nvidia-xconfig, which made a new xorg.conf file. Option "CIOverlay" is in the new file, which should enable Pseudocolor visuals. However, after rebooting with -- -r, Xorg won't start. Xerrors says:
No devices detected
Fatal server error:
no screens found
XIO: fatal IO error 146 (Connection refused) on X server ":0.0"
error (pid 714): Server for display :0 can't be started
/var/log/Xorg.0.log appears to show that /usr/X11/lib/modules/drivers//nvidia_drv.so (compiled for 4.0.2, module version 1.0.0) is loaded:
(II) NVIDIA dlloader X driver 173.14.09
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Prinmary Device is: PCI 00:0f:0
(EE) No devices detected
So Xorg can't find my video devices. This page: http://us.download.nvidia.com/solaris/173.14.09/README/appendix-c.html does show that the Quadro FX 3500 is suppoted (thank heavens).
When I run /usr/X11/bin/scanpci I get:
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x8086 device 0x7190
Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x8086 device 0x7191
Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
pci bus 0x0000 cardnum 0x07 function 0x00: vendor 0x8086 device 0x7110
Intel Corporation 82371AB/EB/MB PIIX4 ISA
pci bus 0x0000 cardnum 0x07 function 0x01: vendor 0x8086 device 0x7111
Intel Corporation 82371AB/EB/MB PIIX4 IDE
pci bus 0x0000 cardnum 0x07 function 0x03: vendor 0x8086 device 0x7113
Intel Corporation 82371AB/EB/MB PIIX4 ACPI
pci bus 0x0000 cardnum 0x0f function 0x00: vendor 0x15ad device 0x0405
VMware Inc Abstract SVGA II Adapter
pci bus 0x0000 cardnum 0x10 function 0x00: vendor 0x1000 device 0x0030
LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI
pci bus 0x0000 cardnum 0x11 function 0x00: vendor 0x15ad device 0x0790
VMware Inc Device unknown
pci bus 0x0002 cardnum 0x00 function 0x00: vendor 0x8086 device 0x100f
Intel Corporation 82545EM Gigabit Ethernet Controller (Copper)
pci bus 0x0002 cardnum 0x01 function 0x00: vendor 0x1274 device 0x1371
Ensoniq ES1371 [AudioPCI-97]
Only VMware devices are seen, and there is nothing in /dev/fbs except "text-0 -> ../../devices/pci@0,0/display@f:text-0"
There is a /dev/nvidia0 and it should be symlinked to /dev/fbs/nvidia0, but the link is broken. Can Solaris 10 use the installed Solaris NVIDIA drivers in a VMware workstation environment? The only way I can get Solaris to work is to use the vmware video driver, which does not support pseudocolor visuals.

Similar Messages

Solaris 10 10/08 x86 DVD will not boot, workaround inc.

hi,
Downloaded the Solaris 10 10/08 x86 DVD. It will not boot up at all with the 2 Gigabyte boards I have tryed it with. GA-G33-DS3R and GA-N650SLI-DS4L I downloaded the ISO twice and checked the checksum. Burnt the DVD 4 times! The DVD works fine with my Eee PC 900 over usb. Booting the 2 gigabyte board over usb works a bit better, they get to GRUB but they still dont work correctly.
I am using IDE DVD drives with the 2 gigabyte boards. I have never had a problem like his before with my hardware. Been experimenting with lots of diffrent Linux distro's recently and they all booted fine from DVD's I have burnt from downloaded ISO's.
I have tryed the CD install disks, CD1 boots up and start the install OK, but would not finish corrctly for me. Some other problem am not going into.....
The DVD workaround I am using.
Boot up the system with am old Solaris DVD.
At the very first menu, press an arrow key to stop the 6 second timer.
Remove the old Solaris DVD and replace it with the new Solaris 10 10/08 DVD.
Wait a few seconds and select Solaris from the menu.
The install program will now continue with the new DVD. If you dont have am old solaris DVD, you could try downloading CD1 and booting that then swapping it out fot the new DVD. Not tryed this myself.
Brian,

hi,
Downloaded the Solaris 10 10/08 x86 DVD. It will not boot up at all with the 2 Gigabyte boards I have tryed it with. GA-G33-DS3R and GA-N650SLI-DS4L I downloaded the ISO twice and checked the checksum. Burnt the DVD 4 times! The DVD works fine with my Eee PC 900 over usb. Booting the 2 gigabyte board over usb works a bit better, they get to GRUB but they still dont work correctly.
I am using IDE DVD drives with the 2 gigabyte boards. I have never had a problem like his before with my hardware. Been experimenting with lots of diffrent Linux distro's recently and they all booted fine from DVD's I have burnt from downloaded ISO's.
I have tryed the CD install disks, CD1 boots up and start the install OK, but would not finish corrctly for me. Some other problem am not going into.....
The DVD workaround I am using.
Boot up the system with am old Solaris DVD.
At the very first menu, press an arrow key to stop the 6 second timer.
Remove the old Solaris DVD and replace it with the new Solaris 10 10/08 DVD.
Wait a few seconds and select Solaris from the menu.
The install program will now continue with the new DVD. If you dont have am old solaris DVD, you could try downloading CD1 and booting that then swapping it out fot the new DVD. Not tryed this myself.
Brian,

Sdtaudio on Solaris 8 on Sparc - CD-ROM audio not available

I'm runnning Solaris 8 on an UltraSparc 1. I am trying to play audio from
my CD-ROM through the internal speakers. I have xmcd installed and working
and it recognizes and plays CDs, but audio isn't being routed to the
internal speakers. When I open sdtaudio (the audio tool) I notice that the
CD-ROM is greyed out/unavailable as a sound source.
I'm sure I'm missing something obvious; can anyone help? How can I select
the CD-ROM as a sound source?

You can find some help here:
http://www.cisco.com/en/US/products/sw/voicesw/ps2192/products_qanda_item09186a008009483b.shtml

Support for 8-bit pseudocolor visuals on Solaris 10 u8 Virtualbox guest

Hello,
I am running Solaris 10 u8 x86 as a Virtualbox (3.0.8) guest on a WinXP host with a NVIDIA Quadro FX 3500 vcard. I use JDS for the Solaris guest, and only 24-bit truecolor visuals are available for the desktop. I desperately need to run Xnest in 8-bit pseudocolor mode for an application. The video driver supplied with the Vbox Solaris guest additions has limited capability, and I think that until that driver is upgraded, I am out of luck. Does anyone have any different thoughts about that?
Is there a way to edit xorg.conf to get support for 8-bit pseudocolor overlay graphics? Wouldchanging the video driver in that file from vboxvideo to either VGA or VESA help? Any advice from an X expert would be GREATLY appreciated.
I've also tried to use svcadm to get the guest to open in 8-bit mode (default depth), but I think that the Vbox video driver (standard and VESA) only support 16- and 32-bit color modes. Is there some other way to get JDS or CDE in the guest to run in 8-bit color?
Thanks.....

sparcmaster wrote:
Regarding expense, I was referring to the dual-headed card you suggested, not Xming.ah. my bad. Though most cards nowadays have dual outputs.
Here is a Vbox report documenting the whole situation, including Sun's replies regarding DirectColor:
http://www.virtualbox.org/ticket/4557
it looks like you guys were talking past each other.
>
Note my outputs of xdpyinfo in there: no Pseudocolor visuals in 24-bit mode in the guest (the cause of my problem). My host NVIDIA card has dual DVI outputs, and I have two monitors; are you saying that I set one monitor in Windows to run in 8-bit, and then run Xming on that monitor, and then set up a remote display for my guest, and try and get the guest to display to that remote display? If so, that could be worth a try. If not, maybe I did not fully understand the idea from your first post. I'd rather not have to go out and buy a new dual-headed card unless absolutely necessary.The problem you have is that virtualbox needs a 8 bit display somewhere to send the output to. Send your end display is a windows display in 24 bit mode, it's a lose since windows won't (at least the last time I looked) allow an 8 bit window in a 24 bit desktop. You could try running the main windows display in 8 bit mode and then starting virtual box, but odds of things going in your favor is not great.
Your new idea of running a vnc server in 8-bit mode within Solaris is very interesting indeed. I am unfamiliar with vnc. I saw this page:
http://www.softpanorama.org/Xwindows/VNC/vnc_on_solaris.shtml
It says that VNC comes with Solaris 10 u5, on the companion CD. I assume that u8 has it also.Somewhere along the line, sun began do bundle vnc as a part of solaris proper. It should be in /bin/vncserver.
I'll look into that. If you know of any other source of info on vnc, please let me know. Thank you VERY MUCH for the suggestion!!!Here's more or less what you should do:
1) login to your virtual solaris box
2) Start up a 8 bit vnc server by typing "vncserver -depth 8 :1"
3) After the setup questions (if I remember, you need to at least set a password), you can connect to the vncserver by
typing "vncviewer :1" and entring the password.
You could also get a windows VNC viewer and connect to the solaris vnc server. This may render faster, since you aren't running the vncviewer in a virtual session.
4) In the vnc viewer display (which may look funny because the default setup is usually a horriffic twm session), start your Xnest.
If you want cde, edit your .vnc/xstartup to look like:
#!/bin/sh
xrdb $HOME/.Xresources
xsetroot -solid grey
dtterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
dtwm &
If you want jds, replace the dttterm/dtwm with gnome-panel.
-r

Microsoft Office Customiziatoin Installer : Error during installation, file:///c:/Program Files (x86)/Microsoft Visual Studio Excel 2013, Windows 7 64 bit

How do I get ride of the Microsoft Office Customization Installer Error during installation, Name: file:///c:/Program Files (x86)/Microsoft Visual Studio From: 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto
Downloading file: :///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto did not succeed
Details:
Name:
From: file:///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto
************** Exception Text **************
System.Deployment.Application.DeploymentDownloadException: Downloading file:///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto did not succeed. ---> System.Net.WebException:
Could not find file 'c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'. ---> System.Net.WebException: Could not find file 'c:\Program Files (x86)\Microsoft Visual
Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'. ---> System.IO.FileNotFoundException: Could not find file 'c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath,
Boolean checkHost)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean useAsync)
at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
--- End of inner exception stack trace ---
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
at System.Net.FileWebRequest.GetResponseCallback(Object state)
--- End of inner exception stack trace ---
at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.FileWebRequest.GetResponse()
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
--- End of inner exception stack trace ---
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.GetManifests(TimeSpan timeout)
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()

I discovered the cause of this problem. I had pointed my "My Documents" folder to a NAS drive that I had rather than my C drive. Apparently Photoshop was dependant on it being on the C dirve. When I repointed this back to my C drive CS5 installed properly.

Fontconfig-2.4.2 package incompatibility w/Solaris 10 5/08 x86

FYI, I found that after installing this package via pkgadd from http://www.sunfreeware.com/indexintel10.html the startup of the window manager would hang indefinitely when attempting a desktop login.
A perusal of pkginfo also shows that there is already a fontconfig package bundled with the OS:
system SUNWfontconfig Fontconfig library
system SUNWfontconfig-docs Fontconfig library documentation
system SUNWfontconfig-root Fontconfig library configuration files
I installed the freeware package because another package I wanted to install (gd) was dependent on it.
Once I deinstalled the freeware package, the desktop login worked, so it looks like installation of the freeware package should be avoided.
To note, I'm running Solaris 10 5/08 x86 on an IBM ThinkPad T60, although I don't believe this issue is hardware specific.

FYI, I just noticed the same conflict on SPARC boxes too. A simple "pkgrm SMCfontc" removes the package and solves the problem.

Oracle Solaris 10 1/13 (x86) VM hangs

Hello,
I have downloaded Oracle VM Template for Oracle Solaris 10 1/13 (x86) from Oracle Software Delivery Cloud
and created a VM out of it. When I start it the blue Oracle Solaris screen is displayed in the console and the VM hangs.
OVS version: 3.2.6
Hardware: Sun Server X3-2 (Formerly Sun Fire X4170 M3)
VM config:
Memory:4GB
CPU:4
Disk:40GB

Yes, but it did not help.
I did finally manage to boot Solaris 10 1/13 by changing "xvda" to "hda"
in the vm.cfg. That said, there's still a problem: the OS takes over 20 minutes
to boot.

"ERROR Failed to find either 24-bit TrueColor or 8-bit PseudoColor Visual"

I have a X200T with the integrated graphics. I'm trying to connect to a server and set up a X Windows kind of thing, but I get this error message: "ERROR Failed to find either 24-bit TrueColor or 8-bit PseudoColor Visual"
Whe I go to Control Panel--> Display --> Settings --> Color Quality, I only see two options: 1) Highest (32-bit) and 2) Medium (16-bit). I don't see an option for 24-bit or "millions of colors", etc.
Any ideas?

Hello,
that´s correct. You can only choose between 32bit and 16bit colour on TP tft´s.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Install Wls6.0 on Solaris 8.0 for x86

I have a pc with Solaris 8.0 for x86 installed .I also install jre1.3 on it.
When I try to install wls6.0 on it ,there comes an error message"can't find
libjava.so ".
I've found the file libjava.so at path "j2re1_3_0/lib/i386/" .
Why the installer didn't find the file ??

create a link (or copy the files) from your $JDK13/bin/i386 to the /usr/bea/jdk130/bin.
Eric Ma wrote:
Glen:
I followed your instructions and was able to install the server.
However, when I tried to start the server from under mydomain,
I got an error message saying java was not found in /usr/bea/jdk130/bin/i386/native_threads/java.
I did copy the i386 directory from the J2SDK SE 1.3.0 home to
under /usr/bea/jdk130/jre/lib per your earlier post. Can you tell
me what else I have to do? TIA,
Eric
glen wilcox <[email protected]> wrote:
You will need to install the 1.3 JDK on your Solairs x86
box, then invoke
the install script from the command line with the following
flag:
LAX_VM /usr/local/jdk/bin/java
where /usr/local/jdk/bin/java represents your installation
of JDK1.3.
Eric Ma wrote:
Have you been able to install WLS 6.0 on Solaris 8 Intel?I cannot
get the downloaded bin file to execute (therefore impossibleto
copy anything into the bea/jdk130 directory), becausethe libjava.so
file cannot be found, even though I included /usr/jdk1.3/jre/lib/i386
in LD_LIBRARY_PATH.
Any further suggestion is appreciated.
Eric Ma
glen wilcox <[email protected]> wrote:
Technically the x86 platform isn't supported but we
had
a similar need to use
it. Try copying the i386 directory that came with the
JDK1.3 you downloaded into
/usr/bea/jdk130/jre/lib (your path may be differentbut
you want to place i386
in the JDK1.3 that came with the WLS6.0). Also be aware
that WLS will ignore
your suggestion to use your JDK and will use it's own
(regardless of what you
specify in the startup file). You will not be ableto
use the Performance Pack
(you'll see the exception when you start the serverbut
it doesn't appear to be
fatal).
Glen Wilcox
Senior Consultant
Valtech

Solaris 10 - system hung, and now will not boot

I have a SunFire V240 with 2 73 SCSI disks running Solaris 10. Only the first disk has been formatted. The box was newly installed last week.
It had 2 zones set up on it and one of them was running a service out of it (called knowledgetree). I came in this morning (monday), and although I could ping the main server and the zone, I could not ssh to the box. I hooked up a console cable to the box, and there was nothing.
I then went to the OK prompt and typed boot.
It said
1} ok boot disk2
Boot device: /pci@1c,600000/scsi@2/disk@0,0:a File and args:
Can't open boot device
{1} ok
I then typed
{1} ok setenv auto-boot? false
auto-boot? = false
{1} ok reset-all
followed by
{1}ok probe-scsi
Target 1
Unit 0 Disk SEAGATE ST373207LSUN72G 045A
If I type the following I get the results below.
{1} ok show-disks
a) /pci@1c,600000/scsi@2,1/disk
b) /pci@1c,600000/scsi@2/disk
c) /pci@1e,600000/ide@d/cdrom
d) /pci@1e,600000/ide@d/disk
q) NO SELECTION
Enter Selection, q to quit: a
/pci@1c,600000/scsi@2,1/disk has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for /pci@1c,600000/scsi@2,1/disk
Does anyone have any ideas on what happened, or what I have to do to get the OS to boot again. I am a bit of a nubie when it comes to Solaris .... I am not sure what happened, or why all of the sudden the server will not boot.
Thanks for the help
Peter

Usually you can just do a "boot disk" or "boot disk1"
devalias will show you what actually devices the short alias map too.
It might be a faulty drive bay.
Try pulling it out of one and plugging it into another.
The do the probe-scsi again.
Then put it back into the first to confirm....

When I inherit Form with binding DataSet why then designer find mdb file in 'C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\'

When I inherit Form with binding DataSet why then designer find mdb file in 'C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\'
Do I have to anything to change in my application settings or what I am doing wrong?
When I inherit a plain Form with no binding DataSet then is all ok.

I finally saw my longingly expected inherited window containing binding dataset.
But only by way that I put mdb file right in to the this damn path.
"c:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\Zdrojove Data\ISMS2003.mdb"
In addition mdb file shall be clear too of password.
We have many windows in our application and we have to work strongly good with inheritance of Form Classes.
But how I will explain to my Boss if he click on that inherited window and will see this break window?
Though I will advice to my Boss that hi have to copy too that MDB files to this damn path,
but the best way could be to find what I need to change that this inherited windows shows without copy this MDB files to
'C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\'
When I check the settings for DataDirectory every paths looks good.
Even if I set password for the mdb file I almost see only broken designer window.
Only by copy this MDB file without his password to this path
'C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\'
I can see this inherited window right.

Solaris 8 for intel x86

Hi,
i want to download the solaris 8 for x86. can any body guide me to find the download link because i can able to find the solairs 8 download link on sun website.

Since Solaris 8 is now an officially discontinued product,
you might only be able to get it if you buy used media sets
on an online auction site such as Ebay.
Could you describe your hardware?
I remember using Solaris 8 on an x86 system.
For what it did, it was good.
However there was a very limited set of hardware that would function.
If I remember correctly, your concern should be as to:
What is your motherboard chipset?
What is your disk controller chipset?
What is your video card?
What network adapter are you planning to use?
What sound card do you own?
I had it on an Intel 440LX P-II.
Only the integrated IDE connectors were recognized.
I had an 8mb ATI Rage PCI card that let me see what I was doing.
Only about two or three specific NICs worked, such as 3C905TX or a DC21140.
My original real Soundblaster 16 (ISA slot) was able to give me the beeps and chirps necessary.
If you're hoping for most anything made in the last couple of years, then forget it.
(... and forget about USB peripherals other than USB 1.x devices like keyboard/mouse)

Solaris 10 06/06 x86 HP DL585 boot hang aftrer reboot HELP!!!

Solaris 10 06/06 x86 HP DL585 boot hang aftrer reboot
when I shutdown server and power on,
solaris usually start.
but after "reboot" (or "init 6"), boot hang on
"SunOS Release 5.10 Version....
Copyright ...
Use is subject to license terms"
HELP!!!

try getting the Solaris x86 drivers frm HP....
http://search.hp.com/redirect.html?type=REG&qt=Solaris+x86&url=http%3A//h18007.www1.hp.com/support/files/server/us/download/22412.html%3Fjumpid%3Dreg_R1002_USEN&pos=1
hope it helps.

Visual Studio 2012 - Source Not Available After Pressing Pause While Debugging

Hi,
In Visual Studio 2008, when we'd open a dialog in our application (Native C++, 64-bit) and pressed 'Pause', the debugger would automatically go to the location of the dialog in the code and the call stack would show the series of calls to arrive
at the current position.
Now that we've upgraded to Visual Studio 2012, this functionality is lost. When we press 'Pause', a 'Source Not Available' tab will appear. The call stack shows the following:
ntdll.dll!ZwWaitForSingleObject()
KernalBase.dll!WaitForSingleObjectEx()
<several lines of nvoglv64.dll>
kernel32.dll!BaseThreadInitThunk()
ntdll.dll!RtlUserThreadStart()
At first we thought it was a symbol issue since none of the Windows-related dlls had pdbs. None of our workstations are connected to the Internet so I used symchk to download all the required symbols. Despite all of the symbols now being loaded, the
debugger still doesn't show the actual call stack into our code.
Is there a setting somewhere that needs to be set? Or are we out of luck since our machines are never online?
Any thoughts are apprecated.
Thanks.
Visual Studio Premium 2012 (11.0.60610.01 Update 3)

Hi,
Welcome to MSDN.
In Visual Studio 2008, when we'd open a dialog in our application (Native C++, 64-bit) and pressed 'Pause', the debugger would automatically go to the location
of the dialog in the code and the call stack would show the series of calls to arrive at the current position.
Now that we've upgraded to Visual Studio 2012, this functionality is lost. When we press 'Pause', a 'Source Not Available' tab will appear. The
call stack shows the following:
ntdll.dll!ZwWaitForSingleObject()
KernalBase.dll!WaitForSingleObjectEx()
<several lines of nvoglv64.dll>
kernel32.dll!BaseThreadInitThunk()
ntdll.dll!RtlUserThreadStart()
According to these words above, do you mean clicking “Break All” as following image?
The error means that our project does not contain source code for the code that we are trying to view, you could refer to
this link for more information.
In order to solve this issue, you could debug it in another machine which can download symbols form Symbol Servers, then copy that
symbols to your machine to test.
You could change the Symbols setting of the Visual Studio of the other machine as following image:
Then copy the symbols in that directory to your machine, and change the Symbols settings to your local directory to test.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help me in installing Solaris Express, Developer Edition X86

Hi,
Help me in installing Solaris Express, Developer Edition
When i am trying to install Solaris, system hangs and the moniter is switcher off when the system goes in GUI mode.
i have intel 945GTP mother board with as on board Intel Graphics Media Accelerator Drives , Chipset -> Intle 945G , 160 SATA Hard Disk, 1 GB DDR2 Ram , P4 3.Ghz Processer , on board Intel PRO/100 VE Network Card.
Please,Help me.
Thanking you,
P.Sathish Kumar

Hello,
first of all: Try to run the HCTS (Hardware
Compatibility Test Suite) first, it's available
here:
http://www.sun.com/bigadmin/hcl/hcts/device_detect.htm
l
This you can run from Windows, and it will list all
hardware that has drivers, and all those, that do not
have drivers (including some public domain drivers).
After that, you have the possibility to install
Solaris WITHOUT a GUI, use one of the two "terminal"
modes. The first Is still a GUI, as it only starts X
and opens a terminal, in which then the installer
runs. The second does NOT start X, but runs the
installer on the console. Try this one, and once you
get through that, you can afterwards figure out the
settings of the Xserver.Hi ,
i have installed the solaris using console.
Still GUI is not starting, the moniter is switched off when GUI gets started
I used Hardware Compatibility Test Suite, its say that system is supported
by Solaris.
Should i have change BIOS setting to stated the system
Bye
P.Sathish Kumar

Solaris 10 5/08 x86 - Pseudocolor visual not available in xdpyinfo

Similar Messages

Maybe you are looking for