Solaris 10.5 = Xwindow reset the user 'connection

I installed Solaris sparc 10.5 in a Sun-Fire-V440
#Uname-a
# SunOS 5.10 Generic_118833-33 SDATA sun4u sparc SUNW, Sun-Fire-V440
My problem is that I tried to connect with xwindow, but the connection failed.
Dtlogin =starting
the # CONSOLE = / dev / console in the login file is already commented,
I believe that the necessary step for the Xwindows is satisfactory.
Thank you for your help

Hi
You need to run the command from console then you can connect to an Xwindow .
# xhost +
Regards
sadiq

Similar Messages

  • Reset the user and password in the config tool

    Dear All,
    how can I reset the user and password in the config tool ?
    Regards
    ertas

    how can I reset the user and password in the config tool ?
    Section from help:
    http://help.sap.com/saphelp_nw70/helpdata/en/1c/129d440bbe4b7d8ae8b82879808d7e/content.htm
    Section from SDN Wiki:
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/ep/to%252breset%252badministrator%252bpassword%252bthrough%252bconfig%252btool
    Regards,
    Abhishek.

  • TS1398 After updating to iOS 7 my iphone 5 won't show any wifi networks or connect to any wifi even after resetting the network connections. HELP!

    After updating my iphone 5 to iOS 7 my phone won't show any wifi networks or connect to any. I reset the network connections and still nothing.

    I Just found it on the apple site, it arrived on a cd a few days later and worked just fine again.
    i would recommend backing everything up just in case. Better safe than sorry, trust me. I've lost so much when i didnt back up once when re-installing the system.
    IT shoulldnt erase everything, bt it might, so back up just in case
    should you loose everything, then i have some tips on moving stuff fromyour iphone/ipod to the computer

  • How to reset the user password in Portal (SSO Users).

    Hi,
    How to let the Portal users (SSO Users) reset their passwords by themselves..?
    - J

    Forgot one another thing,
    Assume that the users have set their required challenge questions (hints).
    How does it work when the user forget his/her password. Is it like something below.
    - click the "Forgot Password" link.
    - Enter your id
    - Answer your Hints.
    Will the new password be emailed to you or you will be allowed access the system and then the user has to choose a new password.
    Could you please shed light on this.
    J.

  • How to get the user connection type

    hi all, I have a PAI process to execute only if the user is connected from ESS/MSS. how can I determine the type of connection, if u have some suggestions please help.
    thanks in advance.

    >
    mniakh mahmoud wrote:
    > hi all, I have a PAI process to execute only if the user is connected from ESS/MSS. how can I determine the type of connection, if u have some suggestions please help.
    > thanks in advance.
    I use function module WS_QUERY to do exactly this thing.  If it sends back RETURN = 'ITS" then it is connected to ESS/MSS.  This has worked in our 6.20 and ECC6 systems, though I guess it may not work in exactly the same way in your system.  There also might be a more modern method of a class to do the same thing. 
    CALL FUNCTION 'WS_QUERY'
           EXPORTING
    *           ENVIRONMENT    =
    *           FILENAME       =
                query          = 'WS'
    *           WINID          =
           IMPORTING
                return         = window_system
           EXCEPTIONS
    *           inv_query      = 1
                no_batch       = 2
                frontend_error = 3
                OTHERS         = 4.

  • To trace the users connecting to database

    Hi ,
    can any body help me on tracing the users who are connected to a database at a particular period of time.?
    thanks

    soundar wrote:
    these details on the audit where it gets recorded..?
    it's in audit trail file in the same directory as background process trace files or some where else..?It depends on the setting. If it is set to DB then it will be sent to the SYS.AUD$ table. This table doesn't need to be accessed directly. You can use the DBA_AUDIT_TRAIL view to get a more friendly look at the audit information.
    If it is set to OS it will go to the operating systems audit trail.
    It may be worth it to look at the documentation :)
    [Initialization Parameters: AUDIT_TRAIL|http://download.oracle.com/docs/cd/A84870_01/doc/server.816/a76961/ch111.htm]

  • Solaris: How do I specify the user under which the WLS runs?

    I just upgraded from WLS 5 to 8. OS is Solaris 8.
    Configuration is one single admin server which also acts as the only managed server.
    The admin server must start up as root so that the users don't have to specify the port :443 at the URL (don't ask me why, but it seems to be the fact on Solaris).
    After starting, I want the server java process to actually run as another user than root. How to I do this?
    It worked on the old Solaris server with WLS 5.1, and I have an idea that it had something to do with the command line option -Dweblogic.system.user=. That option has no effect when trying it with WLS 8.1.
    This must be a common task when running WLS on Solaris. But I cannot figure it out, and a thousand users are waiting for the application to start up. Can anyone tell me how to do this?
    Regards,
    Anders.

    If you logged in as userx and started server, the weblogic server process will be started as userx.
    If you want usery to start server, then you need to give permissions accordingly, though you have installed the weblogic as root.
    -Dweblogic.system.user=, option works only when this user has rwx permissions to various files under weblogic dir (log files, applications, .....).
    Regards
    Sree

  • How do I find the users connected via afptcp

    I want to find the list of users connected to an OES2 Linux server.

    Originally Posted by ataubman
    Start with the documentation Novell Documentation . If you have further issues, please start your own fresh thread with full problem and system details, as your problem has nothing to do with the OP's.
    I've already looked at the documentation and have another thread going, I'm just looking for any info from any source. That source may be watching this thread and not the other.

  • Delete all the user connected to one transaction.

    During some periods, we need to lock some transaction to avoid user modify data while we are processing some critical jobs.
    If the users are yet in the transaction when we lock the transaction they are not removed from the transaction and we need to kill them manually from SM04 transaction in each application server.
    I have been trying to adapt the RSM04000_ALV program to do this but i'm stuck with the use of the pooled session.
    I guess that the system when you select the session and click on end session, it mark in anyplace something to indicate to the fuction module TH_DELETE_USER that when the option ONLY_POOLED_USER is enable, only that session need to be killed.
    Anybody know how this works? someone have a similar fuctionality in you system?

    Hello
    Try this:
      DATA: BEGIN OF SERVER_LIST OCCURS 0.
              INCLUDE STRUCTURE MSXXLIST.
      DATA: END OF SERVER_LIST.
      DATA: BEGIN OF USER_LIST OCCURS 0.
              INCLUDE STRUCTURE UINFO.
      DATA: END OF USER_LIST.
      DATA: BEGIN OF USER_LIST1 OCCURS 0.
              INCLUDE STRUCTURE UINFO.
      DATA: END OF USER_LIST1.
      DATA: USER_TERM LIKE RFCDISPLAY-RFCHOST.
      CALL FUNCTION 'TH_SERVER_LIST'
           TABLES
                LIST   = SERVER_LIST
           EXCEPTIONS
                OTHERS = 1.
      LOOP AT SERVER_LIST.
        CALL FUNCTION 'TH_USER_LIST'
             DESTINATION SERVER_LIST-NAME
             TABLES    LIST = USER_LIST1.
        APPEND LINES OF USER_LIST1 TO USER_LIST.
        REFRESH USER_LIST1.
        LOOP AT USER_LIST WHERE TCODE = 'YOUR T-CODE'.
                CALL FUNCTION 'TH_DELETE_USER' DESTINATION SERVER_LIST-NAME
                 EXPORTING
                    USER            = USER_LIST-BNAME
                    CLIENT          = SY-MANDT
                    TID             = USER_LIST-TID
                 EXCEPTIONS
                    AUTHORITY_ERROR = 1
                    OTHERS          = 2.
        ENDLOOP.
      ENDLOOP.

  • Ive tried everything from resetting my ipod to resetting the network connection and my wifi still doents work what should i do

    ive tried everything from resetting my ipod touch to resseting the network connetion but evertime i put in the password it says unable to connect what should i do

    - Did the iPod successfully connect to the network in the past?
    - Does the iPod successfully connect to other networks?
    - Do other devices successfully connect to the network?
    - Power off and then back on your router.
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points

  • How can i change the user that open the rfc connection (sm58) from R/3?

    Hi all,
    i'd like to know how can i customize the user 'connecting' R/3 and BW, i mean: when i launch a data extraction a fixed user creates the rfc connection to BW (and i can see it from tcode sm58 in r/3), i need to use a different username so that it will come be more easy for me to reorganize the rfc queue in case of errors (we are doing some testing), it's possible to do something like this or everyone has to share the same user r/3 side?
    I hope i've been clear...
    thanks for the help
    S.

    Hi...
    Its recommended that only one user executes the RFC because you must manage the authorizations for remote execution only with few users....in case on error you can send the user as a parameter of the RFC  and you can buid the error message with this parameter and identify the user of execution...
    I hope this helps you
    Regards

  • HT204291 I can't see the airplay icon not on my ipad or iPhone , I did all the step suggest above and also reset my network connection ( which help for 10 min and then the icon disappear again) , please someone help , I am Desperate

    HI Everyone,
    FInally I got my AppleTV  and connected it to my TV and network , sadly it took me hours until I succeed to activate airplay after finding out in some forum that I need to reset my network connections and the airplay icon will appear , happily it happend and I start looking for answers regarding the huge lag in mirroring stage ( which still huge problem that have to be solve after I will solve the airplay disappear issue) .
    after 10 min the airplay icon disappear at my IPad and iPhone and even resetting the network connection is not helping , please please please some one help !!!

    Avielofer wrote:
     BTW, it changing the wi-fi channel is necesary please explain how to do so.
    It's not necessary, but is a good troubleshooting step.  How to do so varies from brand to brand.  Look at the manufacturers website, they should have a manual available that explains how to access the settings and change it.
    Avielofer wrote:
    The ATV connected to the routher via wi-fi , but both sitting on the same shelf.
    In that case, I would strongly encourage you to connect them via a short Ethernet cable.  The proximity of the two devices could be the culprit in the video quality issues.

  • HT4798 How to reset my user password without the apple id option?

    I forgot my user password to login, and i did not select the option of allowing the apple ID to reset the user password, before forgetting my user password.
    What can I do???

    Reset the password of specific users
    An administrator can reset the passwords of other users using  this technique.
    Choose Apple menu > System Preferences, click Users & Groups, click the lock to unlock it and provide an administrator name and password, select a user, and then click Reset Password.

  • IPhone 5 won't connect to wifi. Already reset network settings and reset the whole phone.

    iPhone 5, updated to most recent iOS. Will not connect to wifi at any location, home, work, mall. I have tried resetting the network connections, restarted the phone, even backed it up and completely reset the whole thing. I have to be sitting on top of the router to even get connected, and even then it will disconnect constantly. I used to be able to get full connection even on the other side of the house. Started out of no where, can't even find the network at home to try to connect to. It's not a problem with the routers because no one else is having a problem. It's driving me crazy.

    have you tried updating the drivers on your modem?

  • How can I get the "Service Name" the user used to connect to the DB with

    My application has code that is dependent on the databases "Global Name" make application processing chooses. I want to switch that to the "Service Name" the the user connected to. I have looked at SYS_CONTEXT but I do not seem to see it their. Any ideas?

    Sky13 wrote:
    My application has code that is dependent on the databases "Global Name" make application processing chooses. I want to switch that to the "Service Name" the the user connected to. I have looked at SYS_CONTEXT but I do not seem to see it their. Any ideas?09:19:31 SQL> select * from global_name;
    GLOBAL_NAME
    V112
    09:19:39 SQL>

Maybe you are looking for