Solaris 10 6/06 Next Monday, with ZFS included.Upgrade from 1/06 available?

Hi all
I have read next monday solaris 10 6/06 will be launched worldwide, including new and waited zfs v. 1.0.
I have been using my solaris 10_x86 1/06 for some time ago... and I was wondering if it would be possible to upgrade my system (not re-installing it from zero) or even, install ZFS as install-alone packages??
Someone knows if it will be possible?

The Solaris install program have an upgrade option, which you can use to upgrade from 1/06 to 6/06...
7/M.

Similar Messages

HT201250 Hi what is the next system that I should upgrade from Mac OS X 10.6.8? And, should I backup before downloading it?

Hi what is the next system that I should upgrade from Mac OS X 10.6.8? And, should I backup before downloading it?

You should backup before installing any new system updates or upgrades. Depending upon what your machine is qualified for you could upgrade to Lion or Mountain Lion.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Need to find test data with payments include earning from past periods

I am new to Oracle Payroll and need to find test cases which payments include earning from past periods.
I have an R12.1 Vision environment but cannot run Payroll due to issue with Vertex, but I do have front-end and database access.
Wonder any Reports/ Forms I can use to locate sample data with earning from past periods?
Thanks!

Hi,
You can use oracle standard form to query old processed payroll for your desired pay periods.
Navigation is Your HRMS responsibility >View >Payroll Process Results.
In this you need to choose payroll name,from date,to date and click find.
for e.g. in your vision instance you can query with payroll as "Vision Monthly" from "12 2008 Calendar Month" to will be "10 2013 Calendar Month" and find the result.
choose any of the record and view result by further click on Assignment Process button than next click on SOE Report.
Regards,
VISHAL DANGI
Edited by: VISHAL DANGI on Jun 19, 2012 12:50 AM

Problem with FIELD SYMBOL upgrading from 46c to ECC6.0

Hi people... i'm having big trouble making an upgrade from 4.6c to ECC6.0 with this portion of code of Z's programm.
In the line
ASSIGN (w_field) TO <fs_field>.
i don't see any assigment, so <fs_field> remains empty, when enters into firts IF conditions it is TRUE, then go into second IF condition, it is FALSE, and finally assing
<fs_field> = '/'.
, at this point i have a DUMP telling me MOVE_TO_LIT_NOTALLOWED_NODATA
I'm try any way of definition, assigment, but always i have a DUMP.
Someone can give a hand with this issue!
Thanks in advance!!!
This is the full code from the FORM with the problem.
*       FORM GRABA                                        *
* --> VALUE(P_TABLE)                                  *
FORM graba USING value(p_table) TYPE c.
DATA:
    w_field(60),
    w_dd03l TYPE dd03l.
FIELD-SYMBOLS <fs_field>.
CLEAR w_flag.
CASE p_table.
    WHEN 'BGR00'.
      d_bgr00-group = w_batin.
      d_bgr00-mandt = sy-mandt.
      d_bgr00-usnam = sy-uname.
      d_bgr00-xkeep = 'X'.
      d_bgr00-nodata = '/'.
      d_bgr00-stype = 0.
      TRANSFER d_bgr00 TO w_fname.
    WHEN 'BBKPF'.
      LOOP AT gt_dd03l INTO w_dd03l WHERE tabname EQ p_table.
        CONCATENATE
            'd_'
            w_dd03l-tabname
            w_dd03l-fieldname
          INTO w_field.
        ASSIGN (w_field) TO <fs_field>.
        IF <fs_field> IS INITIAL OR <fs_field> EQ '/'.
          IF w_dd03l-fieldname EQ 'TBNAM'.
            <fs_field> = p_table.
          ELSE.
            <fs_field> = '/'.
          ENDIF.
        ELSE.
          w_flag = 'X'.
        ENDIF.
      ENDLOOP.
      TRANSFER d_bbkpf TO w_fname.
    WHEN 'BBSEG'.
      LOOP AT gt_dd03l INTO w_dd03l WHERE tabname EQ p_table.
        CONCATENATE
            'd_'
            w_dd03l-tabname
            w_dd03l-fieldname
          INTO w_field.
        ASSIGN (w_field) TO <fs_field>.
        IF <fs_field> IS INITIAL OR <fs_field> EQ '/'.
          IF w_dd03l-fieldname EQ 'TBNAM'.
            <fs_field> = p_table.
          ELSE.
            <fs_field> = '/'.
          ENDIF.
        ELSE.
          w_flag = 'X'.
        ENDIF.
      ENDLOOP.
      TRANSFER d_bbseg TO w_fname.
ENDCASE.
ENDFORM.
Edited by: Matt on Dec 15, 2008 5:03 PM - Made subject more informative

Gentlemen:
The problem around this statement:
ASSIGN (w_field) TO <fs_field>
is explained as follows:
1. In ABAP language, there are two ways for assigning a new value to a field-symbol.
- Sentence: ASSIGN (values) TO <my_field_symbol>.
In this case, the <my_field_symbol> receives from (w_field) the data type and value content of this variable. So, we keep that a FSymbol is assigned and, at the same time, receives an initial value.
- Sentence: <my_field_symbol> = '/' or <my_field_symbol> = my_var.
In this way, we only pass the content of the variable next to = sign. But before this, the field-symbol must had been assigned (using ASSIGN statement), in another case, the compiler raises an exception.
Following the example of Federico... I think he tried to assign a field like this (please, supose the program imports the structure of a database table with a standard function, into a internal table which is looped by the work area w_field ):
- If w_field contains 'BKPF-WERKS', so sentence ASSIGN will affect the field symbol, passing to this the data type and current content of table field BKPF-WERKS.
- If w_field contains 'BKPF-.INCLUDE': *the column .INCLUDE obviously is not associated with a data type... so our statement ASSIGN... TO... never pass any data type or value to our field-symbol. So that, this field is never initialized properly, and when inmmediately you try to execute something like this: <my_field_symbol> = '/', the game (program) is over.. XD
I hope this post was helpful for anyone...
Best Regards!!
RRG
ABAPer(u) - EVOLution

New Build with Operating System upgrade from ME to XP

I am going to inbark on my first system build. THe MSI K8N Neo4 Platinium is highly recommended. I am not going to do a complete rebuild. I am just going to keep my newest hardward from my old system. My old processer a P3 933mhz along with moboard is at the core of my upgrade. I noticed on the K8N page that the board does not support ME. My old system (Gateway) shipped with ME for which I purchased the XP upgrade. I understand that the XP upgrade disk has the full operating system on it and all I have to do is put the ME disk in when the XP disk asks for previous operating system. Will this board be able to recognize the ME disk so that it will pass muster with the XP upgrade disk?

Quote from: Edddd on 02-July-05, 21:15:37
Thank you both for the prompt reply, what are your thoughts about the K8N Neo4 Platinium mobo? Is it as good as Tom's Hardware says it is? I am planning on intalling an AMD Athlon 64 3700 San Diego on it. I am not a real power gamer. I just want something that will antincipate the future. My current rig, P3 933mhz has lasted me for 5 years. Thanks
The MSI K8N NEO 4 Platinum is a very stable board, has a good range of features, is highly overclockable and is just great. I think mine is great so far and I suggest you buy a decent power supply with 22A - 24A minimum on the +12V rail to make sure it lasts and worls 100% correctly.
If you need any more help just ask!

Had old PC with iTunes including music from my CDs, want to transfer it all to iTunes installed on my new PC...so far it only seems to be letting my load "purchased music"...how do I also salvage numerous other songs on my iPhone to my new PC/iTunes?

How do I bring music from my CDs in iTunes from an old PC to iTunes recently installed on my new PC? The music is all on my iPhone as well.

To clarify, on my iPhone and in iTunes on my old PC I have a combination of purchased music from the iTunes store and music I had imported several years ago from my collection of music CDs. It appears if I now sync from my new PC via iTunes, it will wipe all of the music from my iPhone and then sync up only the music I've purchased from the iTunes Store.

Time-out problems with RV320 (after upgrade from RV042)

config:
dual wan
WAN1: 4G router (DHCP) - approx 25Mbit/ 8Mbit
WAN2: PPOE (DSL) - 1 Mbit/ 0.2 Mbit
worked with a RV042 before and upgraded to a RV320 now.
all other things are unchanged.
3 problems - 2 solved/ not critical - one still open:
a) not critical: DHCP Status does not include all devices (changing view - but all-time problem)
I would suspect a software bug.... DHCP itself works perfectly/ IPs are assigned (just not shown in status)
b) solved (at least for now): internet connection featured time-outs; after many tries, disabling the SPI in the firewall helped
btw: this only happend for the WAN1 - WAN2 worked (or is that slow that the additonal wait time did not matter ;-)
c) very annoying: exchange connection (from Outlook client to external exchange) still has time-outs (mostly the whole mail client hangs/ ends to be restarted).
As soon as I disable WAN1, it works! But it´s not the LTE WAN itself - switching back to the RV042 does not show the same symptom.
I tried: include IP into local DNS (in general I work with google DNS servers - but changing that does not help either), opening all traffic for teh realevant IPs and disabling the firewall completely. no positive results....
thanks for any hints....

I agree with you on a, probably a bug of some sort.
b is an issue I've seen before, and even on similar bandwidth (25/5) on my rv016. What was able to figure out is that the carrier (ISP) is sending about 4k/sec of ICMP packets to the router, which in turn makes the router think it's under attack so it drops the connection. As you can tell, disabling the SPI helps. For me, putting another router in front of my rv016 (on 2 of 3 wans) was my only 'permanent' solution.
c sounds like there's a protocol binding/static route in the rv042 that you need to add to the rv320. I'd check that first.
Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com

Having troubles with Checkboxes after upgrade from 2 to 3.1.2

Hola forum!
For some reason, after I upgraded Apex to 3.1.2, all my screens where I have a checkbox immediately followed by an item, that item is now being automatically moved down to the next line (this used to work fine in 2)?
So, I hadsomething like this
Email Indicator [] Email Description____________________
The problem is that after the upgrade everything looks like:
Email Indicator []
Email Description____________________
I have everything setup right - Email Description has Begin On New Line = No and ...Field = No
Also, Email Indicator has a colspan of 2 (but I've tried every configuration to get this back to the way it was).
Any ideas?
Thanks!
Dan

Hi all,
fixed the problem !
Problem description:
All files in "$APACHE_HOME/Apache/images/*" have restricted permissions on filesystem level. They are all set to "-r--r-----" , so copying new files to this folder (and subsequent images/css, images/javascripts) fails.
Problem solution:
- in the "$APACHE_HOME/Apache/images" execute a "chmod -R u+w *" to give write permissions to owner of all files.
- then go to th installation directory of apex and "copy -pR ./images/* $APACHE_HOME/Apache/images".
- Check that there are now new files in the target directory
- Then refresh the browser with "Ctrl-Shit-R" .
-> It works !
Thanks for everybodies help!

Cannot connect to internet with Huawei after upgrade from 10.7.4 to 10.7.5

I have an iMac which came with os X 10.7.4.When I installed my Huawei E303 data card, I was able toconnect to the internet.
After upgrading to 10.7.5 the system appears toconnect and I can text, but there is nointernet connectivity.
Thanks for any advice

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
For 10.5/10.6/10.7, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

License key question with regards to upgrading from 7/8.1 to 10

Hi, I hope I've posted my question in the right area of the forum:
I understand that Windows 10 will be a free upgrade for Win7/Win8 users.
That's really wonderful but I was wondering what the exact mechanism with regards to our 7/8 license keys. Here's a couple examples to clarify my question:
first, example: I have Windows 7 Pro license and say I upgrade to 10 within the first year. Let's say I need to reinstall Windows after that first year is finished will I still be able to use that same license key I used to upgrade 7 to 10 to install a fresh
copy of Windows 10 or will I need to purchase a new license because the year is elapsed?
Here's another scenario. I upgrade to Windows 10 from 7 and after trying Windows 10 for while, I decide to uninstall 10 and go back to 7... because I'm crazy like that.... Will I be able to use my original Key for Windows 7 or is the upgrade a one way road:
where the 7 key turns into a Windows 10 key and can no longer be used to activate Windows 7?
Thanks for the feedback!

Hi Momashi
Here's another scenario. I upgrade to Windows 10 from 7 and after trying Windows 10 for while, I decide to uninstall 10 and go back to 7...
because I'm crazy like that.... Will I be able to use my original Key for Windows 7 or is the upgrade a one way road: where the 7 key turns into a Windows 10 key and can no longer be used to activate Windows 7?
If you Upgrade to Windows 10 and do not like it, for whatever reason.
Before you upgrade to Windows 10.
Create an image of windows 7 to an external HD and a recovery CD, using windows 7 Backup and Restore.
You can re-install windows 7 in the SAME SYSTEM using the recovery CD without using a key.
Hope it helps
Where did you get your outlandish information about a Windows 7 key turning into a Windows 10 key? Nothing in the past has ever happened like this before, so what makes you think it will happen with Windows 10?
My Windows ME did not turn into a Windows XP key!
My Windows XP key did not turn into a Windows Vista key!
My Windows Vista key did not turn into a Windows 7 key!
And so on!
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

VPN Server broken with Windows after upgrade from Tiger.

Hey there
I use Tiger 10.4 Server on a PowerMac G4.
It has two network interfaces, one public facing with it's own static IP, and the other internal facing.
The VPN service works perfectly, and allows people to connect via L2TP and assignes them an IP on the internal facing subnet, and allows OS X and Windows clients to connect.
However after upgrading to Leopard, only Mac clients can connect, all the Windows clients connect, and although they get an IP and are able to ping destinations, attempts to connect to these destinations (some of which are web apps on port 80, others are file servers running Samba), they just sit waiting for ever.
I've experimented with this problem, and it appears to be a problem with MTU and packet fragmentation, however these settings appear to be the same between Tiger, which worked, and Leopard which does not work.
Does anyone have any experience with the new VPN Server in Leopard, and can offer me any advice on how to fix this problem? I'm currently downgraded to Tiger again until a fix can be found.

I had the same issue, among others, but I finally got everything to work eventually. It seems that if the IP range of the client connecting to VPN is in the same range of the server LAN, there will be connectivity issues, whether it be pcs and/or macs not being able to connect. The following set up got my VPN services working:
1. Get DNS and Open Directory working properly. When I did an upgrade, the Server Admin updated my zone files with a curious extra space, which killed DNS. For example, I had the name server as ns.company.private., but in the files it would say ns. company.private everywhere! I've been reading about various bugs in upgrading DNS, so I think it's best just to start DNS from scratch. But if you are upgrading, the following thread expalins how to go about setting up DNS and Open Directory: http://discussions.apple.com/thread.jspa?messageID=5957209&#5957209
2. Once you have Open directory users and dns working properly, then set up VPN. Give a unique IP range to the internal network (192.168.7.1/24) that other networks will not emulate. If you use 192.168.1.1, you will likely run into issues. You can always test this method out by changing the IP range from a remote location and trying to get in this way instead of changing the server. Also, be aware that if you use Gateway Assistant within NAT, it will automatically give you a 192.168.1.1/24 range, at least that's been my experience, and this always killed VPN for me. I would set up NAT manually to avoid problems.
3. Ensure that the DNS information under the Client Information tab is correct. For my server I have 192.168.9.1 as the nameserver, and company.private as the search domain. Then set up routing tables. Mine are 192.168.0.0:255.255.0.0 private and 0.0.0.0:0.0.0.0 public.
Also, when you restart the server, stop and restart VPN services, as there is some talk about the Tiger bug still being around, where VPN services are messed up upon startup. This all worked for me and a couple others that had similar server set ups. Hopefully this will work for you.

Crypt acquire context failed with 0x8009000f after upgrade from sms 2003 to SCCM 2007 SP1

I've upgraded clients from SMS 2003 SP3 to SCCM 2007 SP1.
In the SCCM console some ressources are showing as not being client.
If I look on the machine, I can see that client is installed but the client cannot communicate with the management point.
CCMEXEC.log shows the following error message :
Crypt acquire context failed with 0x8009000f.
Failed to create certificate 8009000f CcmExec 21/04/2009 9:49:10 1948 (0x079C)
CCMDoCertificateMaintenance() failed (0x8009000f).
So, the issue is related to certificate
If I go to C:\documents and settings\all users\Application Data\Microsoft\Crypto\RSA\MachineKeys and delete the file begining by 19c5cf... and then restart the client the problem is solved.
Can someone explain what is happening ?
What can I do to prevent this problem
Kind regards

In Server 2008 R2 SP1 (when Pushing Out SCCM 2012 clients)
I just added another account to the security (local Administrators) for the key which starts with 19c5cf...
and restarted the SMS AGENT HOST SERVICE.
Thats also resolved the problem. (NETWORK was the only security account on the key file).

Problems with Aperture after upgrading from Tiger to Snow Leopard

Help! I recently upgraded my IMac operating system from Tiger to Snow Leopard. Now, I am finding my aperture is not responding the way it used to. I cannot change the border dimensions; I can't print. Any suggestions would be appreciated. I was told by Apple Technical Support that they will not provide support for Aperture 2 and that I would have to upgrade to Aperture 3. Is this correct?

This is called a Kernel panic.
See here for possible solutions:
http://support.apple.com/kb/TS3742
Did you do anything else apart from ungrading OS?
Did you add memory?
Bad or not well seated memory modules are often a cause of kernel panic

Problem with CM after upgrading from 4.0.19 - 4.1.1

I upgraded my Edge-WAE and Core-WAE from 4.0.19 to 4.1.1 and it was successful
However, after upgrading the CM, I got the message "service temporarily unavailable" when access the web page.
The console showed: "Stopping the service 'cms_cdm' because it is restarting too often."
When I quried the CMS service, I got:
CMS services information :
Service cms_httpd is running
Service cms_cdm is not running
What may be the problem?

I had the same problem and opened a TAC case. It seems that others are reporting the same trouble when using the CM GUI to upgrade the CM. For some reason it doesn't back up the database correctly and it gets corrupted, causing the cms_cdm to crash and then shut down.
I was told to roll back to 4.0.19, de-register all the non-CM devices using a forced de-register, then from the CM CLI, ftp the new 4.1.1 image over, reload, and re-register all the devices.
Luckily my setup was in the lab and not production. There may be a better/another way to do it, but that's the way I got it done.

Cannot scroll or zoom with touchpad after upgrading from win 8 to win 8.1

Hi everyone,
I upgraded win 8 to win 8.1, and then my laptop's touchpad cannot scrol, rotate, or zoom. Does anyone know how to fix it?
My laptop is envy touchsmart 15t j000.
thanks

Hey hvbnfrgvn,
Thank you for the information on your HP Pavilion g7-2270us Notebook PC.
I suggest following the steps in this document for Drive Cannot Read Discs (Windows 8).
If your CD/DVD Drive Is Not Detected (Windows 8), follow the steps in this document.
I hope this information helps, please keep me posted on how it goes.
Best of luck and have a great day!
I worked on behalf of HP.

Solaris 10 6/06 Next Monday, with ZFS included.Upgrade from 1/06 available?

Similar Messages

Maybe you are looking for