Solaris 10 8/07 will not install

I cannot get Solaris 10 8/07 to install from a DVD .iso image. I have an x86 platform with 2.66 GHz Celeron Processor and 256MB RAM and 60 GB HD so I believe the hardware is adequate. In my first attempt at installation I had Windows XP and openSUSE 10.3 both successfully on my HD, and was operating in openSUSE 10.3. I used the "cat" shell terminal command, to glue all five pieces (two OS parts, companion iso, and md5 lists) and then burned to DVD using the openSUSE "k3b" DVD burner app. It was unsuccessful. What came up when booting from this newly created DVD .iso image was very slowly (too slowly it seems) occuring dots like about this many > ". . . . . . . . . . . . . . .", and then three boot options. I choose the default "Solaris" option. Then what came on the screen was "Copyright 1983-2007 Sun Microsystems, Inc. Use is subject to license terms", and then "Configuring devices", with a cursor blinking forever and hanging, on the next line. That's as far as it goes in booting up. It hangs forever at this point. Everything was super slow in getting to the "Configuring devices" part as well.
Then, I tried just the essential files OS itself parts a & b, used "cat" to glue them together, and the exact same occurance as above happened.
Then, I decided to wipe the my entire hardrive with "DBAN" (a harddrive eraser), do a fresh install of Windows XP, and so go the WINDOWS x86 option route...had to first install ".net 3.0" and then "CD burner XP", (for CD burner XP to work you now need .net for Win XP OS)...and after all the downloading and decompression time for the WINDOWS x86 Solaris OS .exe file, that did correctly expand to a single .iso file, still, the same exact results as the very first DVD .iso burn.
Then thought, okay maybe my PC x86 hardware is not powerful enough and so ran Sun Device Detection Tool, and it detected all the drivers on my system except for 56K modem and a warning about vga text, so that's okay. I don't use 56K, and could see the text abuot "Configuring devices", so I believe this is not the problem at this stage.
Does anyone have any idea what the problem is? Do I need some kind of Solaris 10 8/07 patch to then build a new .iso build?
I'm at a complete loss, and now quite frustrated.

I also had that exact same issue on a "HP Presario 2.2Ghz Celeron with 1Ghz ram".
It hangs on the blinking cursor. I am a techie, so I downloaded and burned more dvds in different ways. They all respond the same in that computer (so it shouldn't be a media problem), HOWEVER, on ONE machine (P3 1.0ghz 512MB 60GB) I have gotten the installation to proceed all the way to...
[solaris install console text reads]
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
Starting Solaris Installation...
[end]
It is past the partition creation point, and should be installing the software.
I installed a fresh hard drive in to do some playing, and it did not create any partition information even though it is past that point.
I think it may be a problem with the x86 installation program set. But I have no SPARC hardware in which to test.
I would love to evaluate sol10 if anybody can find a workaround.
Please advise :-)

Similar Messages

Solaris 10 x86 (gold) will not install - Cannot start X-Server

(Originally posted in the wrong forum. Oops)
Okay,. this is really stupid. I don't understand this one at all.
I cannot install Solaris x86 (gold - as in "non-beta") at all. I have tried both the ATI Rage 128 Pro and NVidia GeForce chipsets. Both cards are correctly detected; however, regardless of what selection or driver option I choose, the installation crashes immediately thereafter.
If I let the installation go on its own, it stops completely at the "Detecting additional network parameters" or whatever that particular error message is.
If I manually select the standard (non XF86) drivers of the card, black-on-yellow text complains about how it cannot detect the card (that it correctly identified) and that it cannot start the X server. It then improperly displays the text menu for language selection and stops.
If I manually select the XF86 drivers, it gets all of the way through to where I test the video mode and then just dies. No error message or anything.
{rant mode on}
Jesus, Sun! What the hell is going on? These are two INDUSTRY STANDARD video cards! These aren't some run-of-the-mill, no-name chipsets we're talking about! It's exactly because of idiotic driver issues like this that people laugh when given the choice between Solaris and Linux while looking for Windows alternatives for the desktop!
{rant mode off}
Sorry for the rant, but I've been complaining for years that issues like this are exactly why Windows has been allowed to dominate the desktop. Now here comes Linux which supports just about everything, and Sun still apparently has no clue about supporting desktops. I know , I know-- servers are Sun's strengths, but if Sun is going to try to get JDS onto the desktop, this is not the way to go about it.
Now that I've gotten that off my chest (I really needed that), does anyone know what needs to be done to get this to install properly and of course function properly thereafter without having to jump througha ton of hoops?

That's just what really bothers me about this!
Last week, I installed from the very same CDs onto an old Celeron 633 w/ 128 MB and ATI Rage video chipset just for giggles. Everything went beautifully except for the network. (Once again, Sun shows its pathetic weakness on drivers thus giving Linux a major edge.) The only video error that I got was remedied by switching to the standard driver from the XF86 driver. It ran like a champ afterwards except that it got confused on the network card and therefore prevented network connectivity.
So, this time I tried to install it on a Pentium 4 1.8 GHz w/ 512 MB RAM, and it's puking on me with same video chipset family (ATI Rage) as well as NVidia chipsets! Absolutely ridiculous!

I am trying to use an education program that needs Java applets to install and use and it will not use Safari. When I download IE from the web it will not install. How can I get a browser that will work on my MacAir for travel use of this program?

I am trying to use and education program that needs Java applets and it will not run on Safari. IE will not install from the web. How do I get a browser that will work to install so I can use this program when I travel.

Try using FireFox. IE will only run on a Mac if you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Patch 137274-01 will not install

Recommended Solaris 10 patch 137274-01 will not install using either updatemanager or patch by itself. It failed on two V210 hosts (01/2006) and on one V480 host (08/2007). patchadd was run and it said:
ERROR: attribute verification of </etc/mnttab> failed
unable to fix attributes
Installation of <SUNWcsr> partially failed
When it is run using "smpatch" or "updatemanager", it also leaves a log message failure under "/var/tmp".
The patch worked on an Ultra-80 running (06/2006) however. It also worked on a Sun Blade 100 probably running (06/2006).

The permissions of the file "/etc/mnttab" are "-r--r--r--". For the two Solaris 10 machines that worked, the ownership was "root:root". For the three machines where the patch 137274-01 failed, the ownership was "root:other".
I tried to change the group ownership for "/etc/mnttab" to have group "root". I got a complaint that the operation was not applicable. These memory based files are unique.
Let me know if you still want the full results of any files. The file under /var/tmp had information in the beginning saying that it was an attempt to install a version of the package that already existed. It still had the final error message of "attribute verification" being wrong.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

ITunes will not install, I get an error message: Could not open key:HKEY_LOCAL_MACHINE_software_classes_CLSID

I tried to reinstall iTunes 10.5 on an older PC using Windows XP. iTunes will not install. Tthis is the full error message. Could not open key: HKEY_LOCAL_MACHINE\software\classes\CLSID\{063D34A4-BF84-488D-B699-E8CA04DDE}
Please Help

I was able to solve this problem using the utility explained in this post:
http://blogs.msdn.com/astebner/archive/2006/09/04/739820.aspx
Thanks!
Dell Windows XP

ITunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2

Quicktime will not install on my PC - also stopping iTunes from working

Quicktime and iTunes will not install on my Vista SP 1 PC, Whenever I try to install either I get the following error message;
Quicktime - "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
iTunes - "The installation of Quicktime did not complete successfully. iTunes requires Quicktime."
From my iTunes error message I hope that by correcting the Quicktime error the iTunes should in turn be fixed.
I am using the latest installers for each and I can't understand why this is happening,
I have tried completely removing my old version of Quicktime and tried to copy my other PC's Quicktime folder into this one however that has not worked. I have also tried using the latest installers multiple times however I always get the same error message.
Please help me fix this error where Quicktime can't install,
Thanks
James

Says windows install package does not operate yet I can install other programs.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.

I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.

Welcome to the Apple Support Communities
One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
First of all, open  > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there

The new ACR 5.5 update will not install in Elements 7.0

Hello All:
This situation is now becoming ridiculous (well, for me that is). I just tried to install the new ACR 5.5 update and it is "unable to install" into Elements 7.0. I downloaded the update several times, unzipped the install file, but when trying to install, it just gives me a message that it is unable to install and to hit the "quit" button.
I have a Vista 64 Bit system with 12 Gigs of RAM. I've installed Elements 7.0 and Lightroom 2.5 on my system - all with no problems. For some reason, I could never get Photoshop CS-4 to install at all and I've been through the mill trying to install Photoshop - but nothing worked and had to eventually give up. Trying to get Adobe support for CS installation on my 64 Bit system has been ridiculous in this regard as each and every time I called, I was connected with some techrep located in India who all they did was "parrot" back what I told them - how frustrating. But as I mentioned, Elements 7.0 and Lightroom installed just fine.
The previous ACR 5.4 installed just fine into Elements, but now...ACR 5.5 will not install. It tells me that I do NOT have CS-4 installed so it cannot install. What's up with that? Has Adobe stopped supporting the latest ACR upgrades for Elements? What gives?
Does anybody just have just the newest ACR 5.5 plug-in by itself that they can send me so I can just put it in my plug-ins folder (or a place where I can download it)? Adobe used to just have the plug-in that you could unzip and copy and paste and put it into your plug-in folders - but not anymore. Now they make it an 82 Meg install program and thus some of my problems.
Can anybody help here? Why does the install program look for CS-4, yet overlook Elements 7.0 completely. Helpppppppppp.
Ben

Hi Benherrmann,
Sorry to listen that you havent been able to install the Camera Raw 5.5 plugin.
But as far as my knowledge goes for PSE, PSE never lists Camera Raw plugin for updates in the Updater Preferences dialog i.e., if you will launch Help->Check for updates, a updater window will open. If you will check the preferences of that updater dialog, it will tell you that it never checks for updates for Camera Raw plugin unlike what happens in Mac. In Mac Camera Raw updates does get installs just by installing PSE(v6 of course as there is no PSE7 for Mac. Hopefully there will be a v8 for Mac by the end of october as seen in the last release).
Dont know exact reason why Adobe had configured it in that way? why there is some difference between Win and Mac.
So it prompts me that somehow you need to install Ps CS4 on the machine to get the patch installation through updater. Although this is not Ps forum, would you mind telling what error/issues are you facing while installing Ps CS4?
Regards,
Ankush

Java applet will not install in browser

My VI will not install a JAva Applet. I jsut keeps saying "Installing Java Applet" and it never prompts for an install or anything. Any ideas? Is there something extra that I need to do that I am not realizing? I attached a screenshot of the window where is says installing.
Solved!
Go to Solution.
Attachments:
Capture.PNG ‏54 KB

How are you trying to install the java applet? Through a website? Calling an installer?
Could it be that the applet already installed on the computer?
Has it ever worked?
Applications Engineer
National Instruments
CLD Certified

Macbook Pro SMC update 1.3 will not install

Greetings,
I am having problems getting the latest SMC update to install on my 15" Macbook pro. My built in drive has a boot camp partition, so I understand if the update won't install using that. But When booting off freshly GUID partitioned and HFS+(journaled) formatted Firewire 400 drive (Leopard installed and updated to 10.5.7) SMC 1.3 update will not install and gives same error "Your firmware can not be updated because the hard drive partition scheme may not be supported. You must be booted from a GUID partition or RAID scheme." Huh?
I tried the update pushed down by software update, and a manual download.
Current SMC version showing in system profiler as 1.16f10
Anyone else experience this or have any suggestions?

"...hit the hardware start button, get gong, machine starts to boot, something briefly flashes on the screen"
Hi Bob, you have to hold down the start button(5-10secs) until you hear a long tone. Then let go and everything is ok.
You'll also see the progress bar install the update, that is what the brief flash was but because the button wasn't held for a few seconds, it didn't take.
Message was edited by: musashi88

I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available?

I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available? Will I need to go back even further? Thanks

Upgrading from iPhoto 8 to iPhoto 9 requires a purchase. There are two ways to get to iPhoto 9:
1 - purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com or eBay.com.
2 - if your MBP meets the requirements upgrade you system for free to Mavericks. Then you can purchase the latest iPhoto version, 9.5.1, from the App Store.
OT

I have installed latest update for itunes but it will not install and I receive a message Apple Mobile device failed to start. I have uninstalled and reinstalled itunes but have the same problem. I am using windows 7 and internet explorer

I have downloaded the latest Itunes update, but it will not install and I receive a message 'apple mobile device failed to start'. I have uninstalled and reinstalled itunes but still have the same problem!

Hi there willjay3976,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W.

I have iPhoto '09 v 8.1.2 and it will not install v9.2.1 that i downloaded. Keeps asking for me to have v9.0 or higher. Any ideas please?

Hi, I have iPhoto'09 v8.1.2 (424). I have downloaded v9.2.1 update and it will not install.
Keeps asking for me to have v 9.0 or later. Now i have downloaded 9.1update plus 9.1.3 and they will not install either.
Do i need 9.0 and if so where do i get it? THANKS nomadreg

No, iLIfe is a suite of applications: iMovie, iPhoto and GarageBand (earlier versions of the suite also contained iDVD ad iWeb).
Regards
TD

Solaris 10 8/07 will not install

Similar Messages

Maybe you are looking for