Solaris 10 and create new user

I have got solaris 10, I want to create new user , ( Through command line and GUI), is there any guidline on net shows me step by step how to create user ?
I had created user, but I could not login through that user, I was able to login as root only.

I tried many things, but I still could not login, therefore I asked if you can post me some link show me step by step , I reapt step by step how to create new user in Solaris 10,,,,,,,,,,should step by step,,,,,I know how to use: useradd and chown and mkdir in /export/home,,,,,,etc.
I relly appreciate if there is any link dives details for creating new user, because I could not find.

Similar Messages

How to create new user for OBIEE presentation service

Hello Guys
I now only have 2 users on my OBIEE, demo1, demo2.. Now I'd like to create a new user call A and make this new user able to log on to OBIEE presenation service..
So I went to the RPD admin tool and created new user there and gave password. It was done online mode and I checked out..
I am able to login to admin tool with the new user account, but when I go to presentation service, I am not able to see this new user nor would I be able to log on using the new user account..
So how does this work? If I wanted to create a new user and let it access dashboard, I'd I do it
Any pointer will be greatly appreciated
Thanks

Hi.
actually there is no option available in presentation service to create user. There you can just delete user and create and delete the groups.
Anyhow, you said you have created a user in rpd.
To see this user in answers, you must login into answers with this user once.
are you able to login with the newly created user?
(As you said you done the creation of user in online mode, this may not effect to the answers)
if not, just login with administrator into answers, click on reload server metadata, then log off from there.
Now, try to login with the new user. You may able to login.
OR
just restart your BI Server services.

Create new user process - BPM11g

I need to develop a Create New User Process in BPM11g.
Managers can start this process and create new users for new employee so that the new employee can log in the workspace and start to work.
How can I achieve this in 11g?
I find this perhaps involves weblogic authentication and user role API.
Is anyone familiar with these?

Hey
CREATE USER "TEST" PROFILE "DEFAULT"
IDENTIFIED BY "test" DEFAULT TABLESPACE "USERS"
ACCOUNT UNLOCK;
GRANT "DBA" TO "TEST";
But be careful to grant all privileges (DBA)
Regards

Create and assign new user in SRM org struct when HR Distribution is active

Hello experts,
In SRM HR Distribution list is active.
Now requirement is we want to create new user in SRM and assign it with the SRM Org structure.
1.)Do i need to create a user in SRM and in ECC HR i mean in both the system or in ECC-HR only.?
2.)When user is there in ECC-HR system then how i can assign user to SRM Org structure. Is there any FM or Standarrd Program ?
Thanks!!
Sunny

Hello Sunny,
As you mentioned HR distribution is active hence you need to create the user in ECC environment and assign it to the org. structure in ECC.
Again there would be few user which you would create in SRM evironment and those would be administator specific.
Activating pointers for HRMD_ABA message allows to replicate all changes made to the organizational structure in HR to SRM.
Changes in HR structure include modifications (add/modify/delete) in the following:
u2022 Organizations
u2022 Jobs
u2022 Positions
u2022 Employees
A change in the relationship of any of the elements above will also be replicated to SRM. For instance, an employee changing units will be reflected in SRM.
Pre-requisite: SU01D ID should exist prior to replicating the concerned user in SRM.
Thanks,
Yatin

Create new user same as a existing roles and Privileges

Hi Team,
I am a junior DBA. New user Joined in Application team. So, Client requested me.....
Crerate new user with same privileges as like as existing user.
As of now i am creating user like "create user username identified by "password". Then grant privileges to that user. earliar I never comapare or copied users.
Please suggest any one how to create new user as like as existing user roles and privileges.
Thanks,
Venkat

For basic cloning:
select dbms_metadata.get_ddl('USER', '...') FROM DUAL;
SELECT DBMS_METADATA.GET_GRANTED_DDL('ROLE_GRANT','...') FROM DUAL;
SELECT DBMS_METADATA.GET_GRANTED_DDL('SYSTEM_GRANT','...') FROM DUAL;
SELECT DBMS_METADATA.GET_GRANTED_DDL('OBJECT_GRANT','...') FROM DUAL;
SELECT DBMS_METADATA.GET_granted_DDL(‘TABLESPACE_QUOTA’, ‘...’) FROM dual;
Then just replace the username with the new one you want to create.

Mountain Lion has created new user log-ins and moved old Users to a separate folder

Mountain Lion has created new user log-ins and moved old Users to a separate folder.
The new users are set-up as "standard" and the old ones were "Administrators"
All files are missing, i.e. no desktop files etc. But they are located in a folder called "Users 1" which is a new folder.
Can anyone help?

Here is perhaps the solution :
http://forums.macrumors.com/showthread.php?t=1191262
follow the "Ratatapa's" instructions.
1/ boot on Recovery part (command R)
2/ find "terminal" in disk utilities
and write "resetpassword" for root. Enter a new password for the root user.
3/ reboot as root user (or when your are login, log out and typing to open a other user "root")
in the "system pref" panel, open "users and groups" and then create new user with the same name, same password.. normally it must be asking you about "You are already an account with the same name" say yes. And it's done.
4/ Log out. re-log as the normal user. desactivated the root user.
about "root user", see also :
http://support.apple.com/kb/ht1528
your welcome
f

I created new users on my mac and my music, photos, etc. is still on the administrators account. How can I share them with all users?

I created new users on my mac and my music, photos, etc. are all still on the administrators account. I tried making the other 2 new accounts administrators but that didn't work. How can I share them with all users?

Read "iTunes: Setting up Home Sharing on your computer."

Creating new user and group in BPEL PM.

Hi,
Please tell me how to cerate new user and groups in BPEL PM.
I understand that BPEL PM uses jazn files to keep user information . I would like to know the steps to create new users and gourps in BPEL PM.
Thanks

Please refer this link http://download.oracle.com/docs/cd/E12483_01/integrate.1013/b28982/security.htm#CDDBJCHD and also you can create users/roles through EM (Enterprise Manager). Here even you can able to specify their roles.
regards
Rajesh A

Error while creating new user in Oracle 11i EBS

I am getting following error while creating new user. How solve this issue?
“Unable to load java class % specified profile option SIGNON_PASSWORD_CUSTOM. Please verify that the class exists and that it implements the java interface oracle.apps.fnd.security.PasswordValidation”.

Following is the text from Note for Custom Password Validation logic:
Customers who wish to use their own password validation logic may do
so by writing their own Java classes that implement the
oracle.apps.fnd.security.PasswordValidation Java interface. The
interface requires 3 methods to be implemented:
1) public boolean validate(String user, String password)
    - This method takes a username and password, and then returns true
or false, indicating whether the user's password is valid or invalid,
respectively.
2) public String getErrorStackMessageName()
    - This method returns the name of the message to display when the
user's password is deemed invalid (i.e., the validate() method returns
false).
3) public String getErrorStackApplicationName()
    - This method returns the application shortname for the
aforementioned error message.
After writing the Java class to perform customized password
validation, the customer must then set the value of the profile option
SIGNON_PASSWORD_CUSTOM to be the full name of the class. If, for
example, the name of the Java class is
oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
SIGNON_PASSWORD_CUSTOM profile option must be
oracle.apps.fnd.security.AppsPasswordValidation. Note that AOL/J
will attempt to load this class dynamically. Hence it is necessary to
make the class accessible by AOL/J. This means that in Forms, the
class must first be loaded into the database using the loadjava
command.
You will need to apply the following patches for 11.5.1:
   1344802
   1363919
   1472974
   1351004
   1377615
You will need to apply the following patches for 11.5.2:
   1377615

Old user account not accessible - Had to create new user account

Why was I forced to create a new user account in order to access Apple discussions? The last time I had posted to Apple discussions was 11/06. From the emails notifying me of replies to my post, I can still go to the link where my question and the replies are. Last week I wanted to post another question. Instead I encountered a circular problem. Every time I tried to log in to discussions with my Apple ID and password (the same as my .Mac name and password, which were working fine for accessing .Mac), I was told that there was an error in my password. When I tried again, I was repeatedly re-directed to a "create new user account" web page that listed my .Mac email address as my Apple ID, as it should have. I tried to re-create my old user account with my own [real] name (as before) and was told that name was in use! Of course, it was me! (I had always used by real first name and surname as my name on Apple discussions.) So finally, very frustrated, I created a new name, a nickname, for discussions, and it worked. Now, all my previous posts are gone. It's as if I didn't exist in the Apple world until today, 9/16/07, but I originally had established my user account in 2004. I tried asking about this in a phone call to Apple support, but I was re-directed to the .Mac web site. Then I posted a question at .Mac feedback to no avail. I had a feeling that as soon as I "obeyed" and created a new user account that wouldn't be recognized as myself, my past posts would be sent into oblivion. I don't like losing all my previous posts that were attached to my user account. I have found this problem very frustrating and would really like an explanation.

Hi decemberbaby,
Try this procedure.
Delete all the Apple Cookies in your browser, and empty the Cache.
Go here Discussions Sign In, and try logging in with your original Apple ID again.
If that still doesn't work, delete the Cookies again, and go to My Info, and log in with the original Apple ID.
If you get the error message "Your Apple ID or password was entered incorrectly.", click on "Did you forget your password? Click here for assistance".
On the page that opens, you can also click on "Forget your Apple ID
ali b

Creating new user in enterprise portal 7 .0

Hi,
I have installed enterprise portal 7.0 and backend is ECC 6.0 on windows 2003.i have logged with J2EE_ADMIN user.when i am trying to create new user in EP7.0 ,i got this problem.(an error occured,contact system administrator).please help me.

Hi,
Go to http://<server>:5<instance no>00
Click on User Management. After login, go to Configuration tab and there you can check.
Thanks
Sunny

Creating new user in AD

Hi all,
I am trying to write a script to create new user in Active Directory using power-shell
$sam = "13653123"
try{
get-aduser -Identity $sam -ErrorAction Stop
catch [Microsoft.ActiveDirectory.Management.ADIdentityNotFoundException]
$error1= [System.Windows.Forms.MessageBox]::Show("ERROR : Account Not found")
$SamAccountName = $sam
$gn = "Jack Sparrow"
$Initials = "ZX"
$dn = "$gn "+" $Initials"
$Department = "1260"
$title = "AM"
$pwd1 = read-host "Please enter the password"
$pwd2 = read-host "Please enter the password"
if($pwd1 -eq $pwd2)
$pwd = $pwd1 = $pwd2
try
$userprinicpalname = $SamAccountName + "@XXX.com"
New-ADUser -SamAccountName $SamAccountName -UserPrincipalName $userprinicpalname -GivenName $gn -Initials $Initials -Name $dn -DisplayName $dn -Title $title -Department $Department -Office $Department -Path "OU=XXXX,DC=XXX,DC=com" -AccountPassword (ConvertTo-SecureString $pwd -AsPlainText -force) -Enabled $True -PasswordNeverExpires $False -ErrorAction Stop
catch [Microsoft.ActiveDirectory.Management.ADPasswordComplexityException]
$error7= [System.Windows.Forms.MessageBox]::Show("ERROR : The password you entered doesnot meet the complexity set in the Password Policy" )
break
else
$error2= [System.Windows.Forms.MessageBox]::Show("ERROR : passwords donot match")
I am getting issue when The password complexity error is coming. It is showing up the error in the catch, but it is creating the account in AD and disabling it.
What I want is if any error is found and caught in the catch, then the user should not be created. How to do that?
Please provide your valuable suggestions and help me out
Naveen Basati

This is a good way to get teh paassword to abort when it fails the test.
function Test-Password{
Param($Password)
Try{
$pwd=ConvertTo-SecureString $Password -AsPlainText -force
Set-ADAccountPassword testuser11 -NewPassword $pwd –Reset
# it worked so return the encrypted password
$pwd
Catch{
Throw $_
$sam = "13653123"
if(get-aduser -Filter "SamAccountName -eq $sam"){
Write-Host 'User already exists' -ForegroundColor green
}else{
Try{
$pwdText='x123!heLno34' # 3 levels of compexity plus length > 9
$pwd=Test-Password $pwdText
$given='Jack'
$surname='Sparrow'
$Initials='Z'
$Department='1260'
$title='AM'
$props=@{
SamAccountName=$sam
UserPrincipalName="$[email protected]"
GivenName=$given
Initials=$Initials
Name="$given $initials $surname"
DisplayName="$given $initials $surname"
Title=$title
Department=$Department
Office=$Department
Path='OU=TestOU,DC=testnet,DC=local'
AccountPassword=$pwd
Enabled=$True
PasswordNeverExpires=$False
New-ADUser @props -ErrorAction Stop
Catch{
throw $_
We just re-throw the error and it propagates to the outer try/catch block.
¯\_(ツ)_/¯

Error while creating new user

Hi
I HAVE LOGGED INTO oracle Portal with user : portal30 passwd : portal30.
After selecteing the administer tab when i click on create new users I am getting error
Error: (WWC-00000) with a back link ( which does not work ). I didn't get anything other than this on screen.
I have tried to found out the soln but never succeded. What you think would be the reason for getting this error?
do tell me on [email protected]
Regards and thanks in advance
Kedar

Kedar,
You may be able to find help on this by searching the 9iAS Portal forum, this forum is for questons relating specifically related to the PDK.
thanks,
Sue

[syntax_error] in Creating New User - After applying SP ABAP & Basis lv 8

Hi Gurus.
actually I already created message to SAP regarding this. but i havent receieve any respond. I post here just in case maybe I can have immediate solution from you guys..
I have 2 system HLC and MFG
which is using same OS and DB
DB Information
DB client lib.     SQL_Server_8.00
DB releases        MSSQL 7.00.699 or higher, MSSQL 8.00.194
DBSL version       700.08
DBSL Patch Level   144
System Information
SAP versions       700
Operating System   Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Wi
OP release         5.2
which have same Kernel and SP patches
Kernel release    700
Sup.Pkg lvl.      146
SAP_ABA     700     0008     SAPKA70008
SAP_BASIS     700     0008     SAPKB70008
ST-PI 2005_1_700     0006     SAPKITLQI6
PI_BASIS     2005_1_700     0005     SAPKIPYJ75
Problem
previously both of the system HLC and MFG is in level 6 SP ABAP and BASIS
when i try to create EWA report for both of them, i have missing module in the report
and i read a note that i need to upgrade to level 8.
when i upgrade both of them to level 7, then i run sgen and there are no problem on both system
but when i upgrade both of them to level 8
in my MFG system, i can run sgen with no problem.
in my HLC system, i run sgen and it take a long time to validate the programs which are need to be recompiled. so i never run sgen to recompile on HLC system after i update the SP to level 8. but i believe this shouldnt be an issue.
the day after i update the SP, one of my user raise an issue.
(same issue is not happened in MFG system only in HLC system)
when we try to create new user..
SU01 -> create new user -> fill all the details -> save -> abap dumps
Error in the ABAP Application Program
The current ABAP program "/SAPSLL/CL_IM_BP_ADDRESS======CP" had to be
   terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/SAPSLL/SAPLBP_ADDRESS " in
   include "/SAPSLL/LBP_ADDRESSTOP " in
line 22:
"Statement "/SAPSLL/DEBUG_DATA" is not defined. Check your spelling . ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "

Hi all
problem is solved..
after doing some debugging, we found out
there are some missing entries in table TRMAC
so i just copy the missing entries from my MFG server to HLC server since they are both in same condition.
now i am wondering why do the support package miss to enter the rows in TRMAC table >.<
SAPache man..

Not able to create new users or groups

hi all,
We have configured multiple LDAPs by changing XML file.
But now we are not able to create new users or groups.It is giving error saying that "Adapter is configured as read-only"
Can anybody help me out in this problem.
Thanking You,
Amol.

For multiple LDAPs to work we have downloaded the Xml file namely "Flat hierarchy + Database "
We made the necessary changes and then uploaded it.
Now we want to create users or groups in portal-database and not in LDAP. But it is throwing error saying that "Adapter is read only". We suppose that it is trying to create users and groups in LDAP.
So can anyone help us to create users or groups in portal-database.
Thanking You,
Amol.

Solaris 10 and create new user

Similar Messages

Maybe you are looking for