Solaris 10 and Hitachi LUN mapping with Oracle 10g RAC and ASM?

Hi all,
I am working on an Oracle 10g RAC and ASM installation with Sun E6900 servers attached to a Hitachi SAN for shared storage with Sun Solaris 10 as the server OS. We are using Oracle 10g Release 2 (10.2.0.3) RAC clusterware
for the clustering software and raw devices for shared storage and Veritas VxFs 4.1 filesystem.
My question is this:
How do I map the raw devices and LUNs on the Hitachi SAN to Solaris 10 OS and Oracle 10g RAC ASM?
I am aware that with an Oracle 10g RAC and ASM instance, one needs to configure the ASM instance initialization parameter file to set the asm_diskstring setting to recognize the LUNs that are presented to the host.
I know that Sun Solaris 10 uses /dev/rdsk/CwTxDySz naming convention at the OS level for disks. However, how would I map this to Oracle 10g ASM settings?
I cannot find this critical piece of information ANYWHERE!!!!
Thanks for your help!

You don't seem to state categorically that you are using Solaris Cluster, so I'll assume it since this is mainly a forum about Solaris Cluster (and IMHO, Solaris Cluster with Clusterware is better than Clusterware on its own).
Clusterware has to see the same device names from all cluster nodes. This is why Solaris Cluster (SC) is a positive benefit over Clusterware because SC provides an automatically managed, consistent name space. Clusterware on its own forces you to manage either the symbolic links (or worse mknods) to create a consistent namespace!
So, given the SC consistent namespace you simple add the raw devices into the ASM configuration, i.e. /dev/did/rdsk/dXsY. If you are using Solaris Volume Manager, you would use /dev/md/<setname>/rdsk/dXXX and if you were using CVM/VxVM you would use /dev/vx/rdsk/<dg_name>/<dev_name>.
Of course, if you genuinely are using Clusterware on its own, then you have somewhat of a management issue! ... time to think about installing SC?
Tim
---

Similar Messages

  • Problem with Oracle 10g RAC VIP network setting at Solaris 9

    Dear All,
    I have tried to set up a Oracle 10g RAC Release 2.
    With OS solaris 9, and 2 nodes.
    The nodes setting as the following:
    nodes 1:
    Public address: 172.16.0.121
    Private address: 192.168.0.121, 192.168.1.121 (dual path for heart beat)
    nodes 2:
    Public address: 172.16.0.122
    Private address: 192.168.0.122, 192.168.1.122
    And i have assigned two IP adress 172.16.0.131, 172.16.0.132 as the VIP address for the
    RAC.
    And the following is the /etc/hosts file:
    root@shk01 # cat /etc/hosts
    # Internet host table
    127.0.0.1 localhost
    # public address
    172.16.0.121 shk01 loghost
    172.16.0.122 shk02
    # heart beat
    192.168.0.121 shk01-priv1
    192.168.1.121 shk01-priv2
    192.168.0.122 shk02-priv1
    192.168.1.122 shk02-priv2
    # VIP address
    172.16.1.131 vip-shk01
    172.16.1.132 vip-shk02
    But when i run the command "$ ./runcluvfy.sh comp nodecon -n shk01,shk02 -verbose"
    it shows the error:
    ERROR:
    Could not find a suitable set of interfaces for VIPs.
    Result: Node connectivity check failed.
    I did try to add the VIP address on bge0:1, as i using bge0 for the public address.
    Both nodes i did using the same interface name for it.
    Anyone have idea for me to check out the error?
    Also, I have other question about the raw device.
    As there is option for setting for ASM or raw device. If choosing raw device, does it mean that it just need to
    format the storage disk but without newfs it? And then the Oracle program will able to handle it?
    Thanks,
    Xentar

    You don't seem to state categorically that you are using Solaris Cluster, so I'll assume it since this is mainly a forum about Solaris Cluster (and IMHO, Solaris Cluster with Clusterware is better than Clusterware on its own).
    Clusterware has to see the same device names from all cluster nodes. This is why Solaris Cluster (SC) is a positive benefit over Clusterware because SC provides an automatically managed, consistent name space. Clusterware on its own forces you to manage either the symbolic links (or worse mknods) to create a consistent namespace!
    So, given the SC consistent namespace you simple add the raw devices into the ASM configuration, i.e. /dev/did/rdsk/dXsY. If you are using Solaris Volume Manager, you would use /dev/md/<setname>/rdsk/dXXX and if you were using CVM/VxVM you would use /dev/vx/rdsk/<dg_name>/<dev_name>.
    Of course, if you genuinely are using Clusterware on its own, then you have somewhat of a management issue! ... time to think about installing SC?
    Tim
    ---

  • Need to change IP address and host name on a ORACLE 10g RAC setup.

    Hi Forum,
    I have a task to change the IP address, host name and host related details for the ORACLE 10g RAC 2 node setup. So Can anyone tell me the procedure to do the same on both the nodes.
    Regards
    Prakash

    change IP Address Public + VIP + Interconnect
    http://surachartopun.com/2007/01/i-want-to-change-ip-address-on-oracle.html
    change VIP name
    http://surachartopun.com/2009/01/change-vip-hostname-on-oracle-rac.html
    If you'd like to change HOSTNAME... Metalink (NOTE:220970.1)
    Can I change the public hostname in my Oracle Database 10g Cluster using Oracle Clusterware?
    Hostname changes are not supported in Oracle Clusterware (CRS), unless you want to perform a deletenode followed by a new addnode operation.
    The hostname is used to store among other things the flag files and Oracle Clusterware stack will not start if hostname is changed.
    Changing the Private Interconnect
    o Change of the IP Address: change the IP address in the hosts file and/or DNS and make sure that ASM and the database also use the same interconnect
    o Change of the private node name used by Oracle Clusterware: requires a reinstall of Oracle Clusterware
    So, Public or Private hostnames can only be changed by removing/adding nodes, or reinstalling Oracle Clusterware. VIP Hostnames can be changed
    But you can read this idea (reinstall CRS)
    http://www.pythian.com/news/482/changing-hostnames-in-oracle-rac
    http://surachartopun.com/2008/12/change-hostnames-oracle-rac.html
    Edited by: Surachart Opun (HunterX) on Oct 25, 2009 10:58 PM

  • Oracle 10g RAC using ASM - Storage Issue

    I’ve an issue related to Oracle 10g RAC.
    I’ve 2 node cluster each being Dell 2850 Server with RHEL 4.0
    I’ve EMC CX300 SAN storage with following partitions
    /orasoft     10 Gb          OCFS2 File system
    /oracrs          2 Gb          OCFS2 File system
    /orabackup      100 Gb          OCFS2 File system
    The datafiles are on ASM which is not directly visible in OS.
    I’ve common Oracle Home installed in /orasoft/db_1 which is shared by both nodes in cluster.
    I’ve faced an issue recently related to EMC storage.
    The /orasoft partition displays 1.4 Gb space available using df command.
    With both nodes sharing the common Oracle Home (/orasoft/db_1), when ever I try to touch a file I get an error as No Space left on device. I’m unable to start any service with the same reason.
    Is this setup correct ??
    Can anyone help me with this storage issue ??

    Need a clarification here...what do you mean by "Storage System"...do you mean a server/node or the SAN storage system. If you are referring to a server/node's local storage, then it would NOT be possible for use by RAC, since the disk space has to be shared among the nodes.
    Here is what you can do:
    - Create two partitions/devices (for example Disk_1 and Disk_2) in the SAN storage
    - Create a ASM disk group which would mirror Disk_1 to Disk_2.
    Again, please note that the partitions have to be visible and be accessible read/write from both the nodes/servers.
    HTH
    Thanks
    Chandra Pabba

  • CONNECTING ORACLE 9I OR 10G DATABASE WITH ORACLE 10G FORMS AND REPORTS

    pls tell how to connect oracle 9i or 10g database with oracle developer suite 10g . though the forms are getting connected but not running with error as
    FRM-10142 the HTTP listner is not running on pls start the listner or check your runtime preferences.
    now pls tell how to start listner and how to chage runtime preferences.
    though i have worked with oracle 9i and forms 6i where we used to copy the tnsnames.ora from network/admin of oracle to forms 6i tnsnames.ora.
    thank you, you may be thinking such a long question.....

    sir
    By server i mean the computer where oc4j and backend database are running is one one of the client pc not a dedicated server..., these database and 10g dev suite are installed in one of the client machine,
    all the clients are using same internet explorer as browser.
    no message is being displyed on some of the client machine where these forms are not being uploaded on browser instead it displays as done in status bar without actually showing anything at all...
    sir so far as jinitiator or JRE is concered i have seen on the client machine (where my forms are running on internet explorer) a pop up is displyed telling one activex control is required to run this program and click to install it..
    after clicking it download jinitiator from server and after installing jinitiator my forms are loaded and start functioning...
    what i feel is as i said this machine where oc4j and database is running is one of the client machine so some other clients do not have acess to this machine, so this might be the reason why those clints are not able to run the said forms on the internet explorer.... can it be so... kindly tell..
    thank you for your patience for reading the question

  • Oracle 10g RAC and Unix *rlogin* question

    I support several 10g RAC databases, running on IBM pSeries servers using AIX 5.3. Our database and clusterware are 10.2.0.3 and 10.2.0.4.
    I understand that user equivalence and rsh/ssh must be enabled in order for the RAC environment and clusterware to communicate across all of the cluster nodes.
    My problem is a question being raised by our internal system auditors. The are requesting that the rlogin and exec commands for AIX be disabled, because they feel it is a security risk. Both commands prompt for a valid userid and password when they are used to remotely login or execute a command.
    I have reviewed the RAC documentation online, and searched Metalink (I am not a Metalink expert, though!) as well as Google and can't find anything stating that rlogin and exec are specifically required in order for RAC to function properly.
    Can anyone offer advice or their perspective on whether or not these two commands need to be enabled in order for RAC to function?
    Thank you in advance for any assistance you can give to me.
    Regards,
    Mark

    Hi Mark,
    as far as my knowledge goes RAC does neither use rlogin nor exec commands.
    After you setup the cluster Oracle communicates simply via. TCP (clusterware) and UDP (RAC) and is only sending and recieving messages. There is no need during runtime for a remote login.
    So als ssh and rsh are solemnly used for installation and patching (not for communication).
    Still Oracle recommends to leave them enabled, since it makes life easier than to enable ssh each time a patch is needed.
    Sebastian

  • Enabling server-side load balancing with Oracle 10g RAC

    Hi, all.
    I created a RAC database on vmware by using DBCA.
    By default, remote_listener and tnsname.ora have been configured.
    The followings are part of dba_services from my RAC database.
    NAME, GOAL, ENABLED, CBL_GOAL
    SYS$BACKGROUND NONE NO SHORT
    SYS$USERS NONE NO SHORT
    DEVDB NO LONG
    By default(created by DBCA), server-side load balancing is enabled for
    the RAC database, DEVDB??
    --> GOAL of DEVDB is null, but CBL_GOAL IS LONG.
    After creating a RAC db by using "DBCA", do I need to do something
    for server-side load balancing??
    If so what I need to do?? How can I test it??
    And what is beneficial in enabling server-side loadbalancing ??
    Is it good in the real world??
    Thanks for reading.
    Best Regards.
    Message was edited by:
    user507290

    [urgent] 10gR2 RAC Load Balancing Configuration (client and server side)!!
    [urgent] 10gR2 RAC Load Balancing Configuration (client and server side)!!
    Virag

  • Using Clob with TopLink 9.0.4.5 and Oracle 10g RAC

    I am trying to store an XML file in a Clob type field of a DB table using TopLink 9.0.4.5 and Oracle 10g RAC and need some guidance about how to do it. I got some directions to start it with the Tip "How-To: Map Large Objects (LOBs) to Oracle Databases with OracleAS TopLink" but still need some more helps.
    When using the Oracle JDBC OCI driver, the tip gives the code block for a Clob field:
    DirectToField scriptMapping = new DirectToField();
    scriptMapping.setAttributeName("script");
    scriptMapping.setFieldName("IMAGE.SCRIPT");
    descriptor.addMapping(scriptMapping);
    As I understand, TopLink creates instances of the Descriptor class at run time for each of the descriptor files and stores them in a database session, where is the proper place (in SessionEvent of TopLinkSessionEventHandler?) for me to get a reference to such an instance of my Descriptor class in Java code so that I can add the above mentioned additional Mapping? Are the above String values of "script" and "IMAGE.SCRIPT" predefined in TopLink API? Can I accomplish the same thing just using the TopLink Workbench tool instead? If yes, please advise the detailed steps to do so.
    The tip also states to call the following code in case of using Clob:
    DatabaseLogin login = session.getLogin();
    login.useStringBinding();
    Should the above 2 lines of code be called after the following lines of code?
    SessionManager sessionManager = SessionManager.getManager();
    Server serverSession = (Server)sessionManager.getSession("MY_SESSION_NAME");
    Besides the above extra coding for the Session and Descriptor Mapping, is there any special handling in between Data model and DB table mapping? Can I map a Java String type to a DB Clob field using the Direct-to-field mapping?
    Appreciate any help.

    Never mind ....... I had already figured it out .....

  • Install Oracle 9i client on a computer with Oracle 10g Client

    Hello all!!
    I'm using a computer with Oracle 10g client, and I access two databases. One server has Oracle 10g server, and the other server has Oracle 9i server.
    I want to install 9i client, to have it also in my computer. I haver read that I just have to install it in a different ORACLE_HOME, but I have a doubt.
    If I install 9i client, would I be able to use the utilities, (exp, expddp, sqlldr) of both versions, or which version will be used in the command line for the utilities.
    Thanks a lot!!!

    To start with, Home Selector is a "9i thing" (and older), in 10g there's the OUI -> Installed Products... -> Environment tab instead.
    About the 9i dbca with other Oracle products installed. If you use launch.exe to start via dbca start menu shortcut, it uses ora92\assistants\dbca as working directory ("start from"). So when not looking for "numbered dlls" like oracore9.dll, a later/different version will be loaded if earlier in path, since loading goes through jre directories, ora92\assistants\dbca, then the dir's from path variable. From there it may start to link in libraries from different homes (on my laptop, "launch.exe dbca" uses files from 2 additional home paths!)
    But, if you instead use dbca.bat started from ora92\bin, it will look in the right directories first and there's no dll mess-up. (But only when using the correct cwd!)
    Plain and simple: stay very far away from multiple-general-home installs. It is possible to install allright, in different homes and all very nicely, but there will be pain when you decide to use the stuff (perhaps with sql*plus as the only exception, but I've run into bugs with that too).
    Message was edited by:
    orafad

  • Connect Oracle 10G XE and Oracle 9.2i Simultaneously from same machine

    Hello,
    How to Connect Oracle 10G XE and Oracle 9.2i Simultaneously from same machine using .Net Application.
    I have one application which is in .net, i want to connect it with oracle 10g XE and oracle 9.2i Simultaneously.
    it always connect only one database which is first in environment variable (path).
    please reply.

    Use SQL*Net or JDBC Connections. Looks like you are connecting using the Bequeathed connections
    Christopher Soza
    Oracle BI DBA

  • Oracle database 10g RAC and ASM configuration

    Hi all,
    I want to ask to everybody something about Oracle 10g RAC and ASm configuration. We plan to migrate to Oracle 10g from 9i, and we will begin configuring oracle but we have to decide which configuration are the best.
    Our materials are bellow:
    Hardware: RP 3440 (HP)
    OS : HPUX 11i Ver 1
    Storage: EVA 4000 (eva disk group)
    The problem is:
    Our supplier recommand us to use HP serviguard + HP serviceguard extension for RAC+ RAc and Raw device as configuration.
    But we want to use Oracekl Clusterware + RAC + ASM
    My question is if anybody know what is the best configuration, we want to use ASm.
    Can we use HP serviguard and ASM.
    Some documentations or link explain oracle RAC and ASM configuration will be appreciate.
    Thanks for your help.
    Regards.
    raitsarevo

    Hello,
    there's no extra RAC software package, but the option is only offered, if one of the supported cluster layers for the respective OS has been installed before.
    10.1.0.3 looks like a complete redesign, but anyway it is a patch, you have to install 10.1.0.2 first.

  • Oracle database 10g RAC and ASm installation

    Hi all,
    I want to ask to everybody something about Oracle 10g RAC and ASm configuration. We plan to migrate to Oracle 10g from 9i, and we will begin configuring oracle but we have to decide which configuration are the best.
    Our materials are bellow:
    Hardware: RP 3440 (HP)
    OS : HPUX 11i Ver 1
    Storage: EVA 4000 (eva disk group)
    The problem is:
    Our supplier recommand us to use HP serviguard + HP serviceguard extension for RAC+ RAc and Raw device as configuration.
    But we want to use Oracekl Clusterware + RAC + ASM
    My question is if anybody know what is the best configuration, we want to use ASm.
    Can we use HP serviguard and ASM.
    Some documentations or link explain oracle RAC and ASM configuration will be appreciate.
    Thanks for your help.
    Regards.
    raitsarevo

    Hi Experts ,
    Using this command
    $ emca
    STARTED EMCA at Mon Mar 09 16:13:13 GMT+07:00 2009
    Enter the following information about the database to be configured
    Listener port number:
    Following error comes:
    Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/emSDK/conf/InventoryLoader
    at oracle.sysman.emcp.EMConfig.getFreePorts(EMConfig.java:4225)
    at oracle.sysman.emcp.EMConfig.checkParameters(EMConfig.java:994)
    at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:265)
    at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:692)
    at oracle.sysman.emcp.EMConfigAssistant.performSetup(EMConfigAssistant.java:641)
    at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:340)
    at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:180)
    Moreover this command does not work on Aix 5.3
    emca -config dbcontrol db -repos recreate
    Regards,
    Edited by: LazyDBA10g on Mar 16, 2009 6:20 AM

  • Oracle 10g RAC installation on HP-UX 11.31 for SAP ERP 6.04

    Dear experts,
    We are trying to install SAP ERP 6.0 EHP4 with Oracle 10g RAC on HP-UX 11.31. Please note that, We are using VERITAS cluster filesystem (CFS) for this purpose and not HP-UX ServiceGuard ClusterFileSystem.
    *As per SAP procedure, we have installaed plain plain SAP system with single instance Oracle (ref: Configuration of SAP NetWeaver for Oracle Database 10gRAC guide). Now we are first trying to install Oracle Clusterware (CRS) and then we will install Oracle RAC software. Is this procedure right?*
    Which file (and its path) we have to use for CRS installation and its patch? Is it runInstaller under /oracle/stage/102_64/clusterware? With this file we can install CRS 10.2.0.1. Similarly for Oracle RAC, which files we are supposed to use, i.e for installation and patch upgrade?
    Also can we use clusterware package available from Oracle directly in the SAP environment?
    We tried to install CRS with runInstaller while running Configuration Assistant after root.sh script.
    The following commands are failing in Configuration Assistant:
    /oracle/CRS/102_64/bin/racgons add_config erpprdd1:4948 erpprdd2:4948
    /oracle/CRS/102_64/bin/oifcfg setif -global  lan1/20.20.20.0:cluster_interconnect lan0/192.168.3.0:public
    /oracle/CRS/102_64/bin/cluvfy stage -post crsinst -n erpprdd1,erpprdd2
    1st command does not give any output if run manually.
    2nd commands o/p: PRIF-12: failed to initialize cluster support services
    3rd commands fails in every check
    Please suggest the solution and expecting answers to the above mentioned questions.
    Thanks & Regards,
    Tejas

    >
    Charles Yu wrote:
    > Q1:  Oracle RAC with 9.2.x on HP-UX?
    > A:   For HA environment, cluster software is: MC/SG on HP-UX 11.31; there are  optional components of MC/SG  for supporting Oracle RAC and SAP application.  I was confused that I could not find the installation guide regarding 4.6C on MC/SG HA environment of HP-UX.
    > Charles
    Relevant docs for Service Guard (SG) cluster are available at http://docs.hp.com. Hope you have checked for the suport of oracle 92x on HP-UX 11.31
    >
    Charles Yu wrote:
    > Q2: Any reason why you don't use a supported database version?
    > A:   Actually, in order to avoiding the the risk of database upgrade and minimizing the migration risk,  top level has decided that keeping the same Oracle version. Indeed, we don't plan the migration of application. On the other hand, it is complicated to do the assessment for application migration.
    > Charles
    You can go for combined os migration and db release upgrade also at a stretch with the same downtime.

  • Oracle database 10g RAc an ASM configuration

    Hi all,
    I want to ask to everybody something about Oracle 10g RAC and ASm configuration. We plan to migrate to Oracle 10g from 9i, and we will begin configuring oracle but we have to decide which configuration are the best.
    Our materials are bellow:
    Hardware: RP 3440 (HP)
    OS : HPUX 11i Ver 1
    Storage: EVA 4000 (eva disk group)
    The problem is:
    Our supplier recommand us to use HP serviguard + HP serviceguard extension for RAC+ RAc and Raw device as configuration.
    But we want to use Oracekl Clusterware + RAC + ASM
    My question is if anybody know what is the best configuration, we want to use ASm.
    Can we use HP serviguard and ASM.
    Some documentations or link explain oracle RAC and ASM configuration will be appreciate.
    Thanks for your help.
    Regards.
    raitsarevo

    Hello,
    there's no extra RAC software package, but the option is only offered, if one of the supported cluster layers for the respective OS has been installed before.
    10.1.0.3 looks like a complete redesign, but anyway it is a patch, you have to install 10.1.0.2 first.

  • Oracle 10g RAC design with ASM and OCFS

    Hi all,
    I have a question about a proposed Oracle 10g Release 2 RAC design for a 2 node cluster.
    ASM can store database files but not Oracle binaries nor OCR and voting disk. As such, OCFS version 1 does not support a shared Oracle Home. We plan to use OCFS version 2 with ASM version 2 on Red Hat Linux Enteprrise Server 4 with Oracle 10g Release 2 (10.2.0.1).
    For OCFS v2, a shared Oracle home and shared OCR and voting disk are supported. My question is does the following proposed architecture make sense for OCFS v2 with ASM v2 on Red Hat Linux 4?
    Oracle 10g Release 2 on Red Hat Enterprise Linux Server 4:
    OCFS V2:
    - shared Oracle home and binaries
    - shared OCR and vdisk files
    - CRS software shared OCFS v2 filesystem
    - spfile
    - controlfiles
    - tnsnames.ora
    ASM v2 with ASMLib v2:
    Proposed ASM disk groups:
    - data_dg for application data
    - backupdg for flashback and archivelogs
    - undo_rac1dg ASM diskgroup for undo tablespace for racnode1
    - undo_rac2dg ASM diskgroup for undo tablespace for racnode2
    - redo_rac1dg ASM diskgroup to hold redo logs for racnode1
    - redo_rac2dg ASM diskgroup to hold redo logs for racnode2
    - temp1dg temp tablespace for racnode1
    - temp2dg temp tablespace for racnode2
    Does this sound like a good initial design?
    Ben Prusinski, Senior DBA

    OK Tim, thanks for advices.
    I think Netbackup can be integrated with RMAN but I don't want to loose time on this (political).
    To summarize:
    ORACLE_HOME and CRS_HOME on each node (RAID1 and NTFS)
    Shared storage:
    Disk1 and disk 2: RAID1: - Raw partition 1 for OCR
    - Raw partition 2 for VotingDisk
    - OCFS for FLASH_RECOVERY_AREA
    Disk3, disk4 and disk5: RAID 0 - Raw with ASM redundancy normal 1 diskgroup for database files.
    This is a running project here, will start testing the design on VMware and then go for production setup.
    Regards

Maybe you are looking for

  • SQL Developer 1.5 on Ubuntu  8.04 (hardy heron)

    Hi all, I have doownladed SQL Developer 1.5 Multiple Platforms for ubuntu 8.04 (hardy ) I installed the Sun Java SDK from Synaptic pacakge Manager Repository. I ran java -version in a console and i got this : ======================================= p

  • In apps purchase not downloaded

    Hi, i have purchased items using in apps purchase, it was not downloaded to my phone, but subsequently my credit card bank called me to verify the purchase. When I confirm, the items was not send in the apps, i tried to purchase again, it will return

  • Airdrop Problem between Macbook Air and iPhone 5

    Why cant i find my iphone 5 (using ios7), in the airdrop section in my macbook air's (using os x mavericks) finder? My iphone 5 is already set to be visible to everyone. My iphone 5 cant find my macbook air as well. Please help me.

  • SWF not updating

    In Flash Builder 4.7 beta 2 Mac version. When I debug a mobile air application a new swf is not created and placed within bin-debug folder. If the swf is deleted in the bin-debug folder then the following error occurs. Process terminated without esta

  • Convert XLWA file into XLS file

    Hi all, I have XLWA file (Single File web Page) and i need to convert as Microsoft Excel file. As microsoft excel 2003 support Single File web page , Web page and XML format ,i can open these files. But i cant open on 2000. Please could you someone h