Solaris 10 - b58 installation fails

I've downloaded b58 of Solaris 10 x86 ... however some packages fail to install during installation:
- Database access failed due to one or more incorrect SQL statements (pkgadd).
It's a non-networked installation. Does anyone have any idea what's causing this? Sol10 is working, but most packages are only partially installed, rendering Sol10 rather useless. I had this very same problem trying to install b55.
Tylan.

Well, I removed that 2nd harddrive. The installation begins fine, no problems there... it's usually somewhere halfway on cd1 or cd2 that these errors appear. But the errors start random - then the installation continues, but the errors remain random.
I noticed however, that SUNWdtdst is usually the first one to fail due to an SQL Statement error.... (I tail the /tmp/install_log every time), but even when this package manages to install succesfully, this very same error appears at the end of cd1. If not, then they surely follow on cd2 after a reboot. I've never made it to cd3 without errors yet.
It doesn't matter if I delete the partitions with fdisk first and try again, nor when I use large slices like 10Gb for root and 10Gb for swap (and no other slices). The funny thing is; Solaris 9 installs succesfully...
I will try installing on another disk one of these days...
I'll also check the message-file then.
Tylan.

Similar Messages

Solaris 10 Installation FAILED

I am trying to install Solaris 10 on my Sony VAIO Laptop concurrently with Windows XP.
I created a partition of abt 6+ GB and started to install Solaris 10. I started to get s bunch of WARNING msgs before the "searching for windowing system" . the search was complete and it presented me with the graphics and other stuff and I selected the defaults. it went thru all the setups before the installation without probs... at the and of installation (abt 2hrs later) it says "cannot be installed and FAILED".
can anybody please help me with this?
would really appereciate.
thank you
Vivek

I do not know details of Your hardware - it determines possibility of eventual Solaris installation.
I recommend two initial diagnostic steps:
1) Consult HCL.
or better:
2) Download "install_check" program from SUN web page, burn bootable CD and check Your hdw. After acceptation of hdw (at least critical parts - video graphics and disk) installation should proceed without significant problems.
BTW - I hope that there is sufficient RAM in Your laptop (256 MB or more) . Next - 6 GB of disk may be insufficient for full installation and comfortable development of software.
Good luck!

WL 6.1 Solaris installation fails

I am trying to install the eval version of WL 6.1SP2 for Solaris, but the installation
fails at the get go with this message:
# sh weblogic610sp2_sol.bin
Preparing to install...
weblogic610sp2_sol.bin: test: ) expected
Any ideas what may be wrong?
Thanks

Hi.
Strange. I just tried this myself on solaris with no problems. Make sure you are
downloading in binary mode. If you are then I suggest you open a case with support. If
nothing else they can probably provide you with an ftp download.
Regards,
Michael
Saiid Paryavi wrote:
No go. I have tried downloading the installer several times and every time the result
is the same.
Thanks for your help.
~Saiid
Michael Young <[email protected]> wrote:
Hi.
Weird. Maybe a corrupted download. Try a fresh download. Let me know
how it goes.
Regards,
Michael
Saiid Paryavi wrote:
I am trying to install the eval version of WL 6.1SP2 for Solaris, butthe installation
fails at the get go with this message:
# sh weblogic610sp2_sol.bin
Preparing to install...
weblogic610sp2_sol.bin: test: ) expected
Any ideas what may be wrong?
Thanks--
Michael Young
Developer Relations Engineer
BEA Support
Michael Young
Developer Relations Engineer
BEA Support

Oracle Forms and Report 10g r2 standalone installation fail on Solaris 8

I tried to install Oracle Forms & Report 10g r2 standalone on solaris 8.
However the installation failed with the following error:
/usr/ccs/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/data1/oraapps/oracle/fr10g//data1/oraapps/oracle/fr10g/bin/genclntsh
ld: fatal: library -lnsl: not found
ld: fatal: library -lsocket: not found
ld: fatal: library -lgen: not found
ld: fatal: library -ldl: not found
ld: fatal: library -lkstat: not found
ld: fatal: library -laio: not found
ld: fatal: library -lposix4: not found
ld: fatal: library -lm: not found
ld: fatal: library -lc: not found
Have anyone encounter the same error. Passed the prerequisite check but still fail during linking.
I managed to install 9.0.4 successfully on the same server without any problem.
Zairi

Do you ahve the Shared_library variable? LD_LIBRARY_PATH, SHARED_LIBRARY_PATH ?? Usually one of this have to point to where the librarias are.
Regards.

SAP NW7.0 SR3 Java AddIn Installation failed at "Import Java dump"

Dear all,
I get an error at Java AddIn Installation SAP Netweaver 7.0 SR3
(Software Life-Cycle Option -> Java Add-In for ABAP -> Oracle ->
Central System ->)
The first installation step "Central Services Instance (SCS) Java Add-
In" I have installed it without errors.
The Installation failed at 2nd step "Database Instance Java Add-In" at phase 11
of 14 "Import java dump":
26.05.09 15:16:46 com.sap.inst.jload.Jload main
INFO: Jload -sec
Q2B,jdbc/pool/Q2B,/usr/sap/Q2B/SYS/global/security/data/SecStore.properties,/usr/sap/Q2B/SYS/global/security/
data/SecStore.key -
dataDir /usr/sap/swdc/51033513/DATA_UNITS/JAVA_EXPORT_JDMP -
job /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN
/ORA/CENTRAL/DB/IMPORT.XML -log jload.log
26.05.09 15:16:47 com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
26.05.09 15:16:47 com.sap.inst.jload.Jload logStackTrace
SEVERE: java.sql.SQLException: Io exception: The Network Adapter could
not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException
(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException
(DatabaseError.java:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException
(DatabaseError.java:255)
at oracle.jdbc.driver.T4CConnection.logon
(T4CConnection.java:387)
at oracle.jdbc.driver.PhysicalConnection.<init>
(PhysicalConnection.java:420)
at oracle.jdbc.driver.T4CConnection.<init>
(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection
(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect
(OracleDriver.java:801)
at
com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection
(NativeConnectionFactory.java:215)
at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection
(OpenSQLDataSourceImpl.java:522)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection
(OpenSQLDataSourceImpl.java:276)
at com.sap.inst.jload.db.DBConnection.connectViaSecureStore
(DBConnection.java:105)
at com.sap.inst.jload.db.DBConnection.connect
(DBConnection.java:149)
at com.sap.inst.jload.Jload.main(Jload.java:580)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke
(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke
(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main
(OfflineToolStart.java:81)
the database is up and running, the Oracle Listener is also working well.
Any idea??
Thanks so much in advance!
Best Regards,
Gerd

Hi Sunny, hi Markus!
many thanks for your hints!
I've just solved the problem. The problem was, our Listener was not configured correctly.
I've adjusted the listener.ora, tnsnames.ora to the correct hostname - cause, we had a hostname-switch last month and I had forgotten to adapt the Listener...
now the Listener is running as well:
mcho35au:oraq2b 120% lsnrctl status LISTENER_Q2B
LSNRCTL for Solaris: Version 10.2.0.4.0 - Production on 30-MAY-2009
09:52:48
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=Q2B.WORLD))
STATUS of the LISTENER
Alias LISTENER_Q2B
Version TNSLSNR for Solaris: Version 10.2.0.4.0 -
Production
Start Date 30-MAY-2009 09:52:15
Uptime 0 days 0 hr. 0 min. 32 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/Q2B/102_64/network/admin/listener.ora
Listener Log
File /oracle/Q2B/102_64/network/log/listener_q2b.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=Q2B.WORLD)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=Q2B)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mcho35au)(PORT=1527)))
Services Summary...
Service "Q2B" has 1 instance(s).
Instance "Q2B", status UNKNOWN, has 1 handler(s) for this service...
Service "Q2B.WORLD" has 1 instance(s).
Instance "Q2B", status READY, has 1 handler(s) for this service...
Service "Q2B_XPT.WORLD" has 1 instance(s).
Instance "Q2B", status READY, has 1 handler(s) for this service...
The command completed successfully
meanwhile the step "Import java dump" has finished successfully!
Thanks to all!
Best Regards,
Gerd
Edited by: Gerd Schuster on May 30, 2009 10:29 AM

Sun Fire V490-Internal FC Drives missing in Solaris 10 installation program

Hi,
We have a V490 server that we are attempting to configure, but the internal FC drives are not available to the Solaris 10 installation program.
The OpenBoot SCSI test fails:
{3} ok test-scsi
Testing /pci@9,600000/SUNW,qlc@2
ERROR : ISP2200 RISC engine did not generate expected interrupt.
DEVICE : /pci@9,600000/SUNW,qlc@2
SUBTEST : selftest:loop-tests:inquiry-test:disk-test
CALLERS : (f010f69c)
MACHINE : Sun Fire V490
SERIAL# : 66233440
DATE : 03/27/2012 14:27:32 GMT
CONTR0LS: diag-level=max test-args=
/pci@9,600000/SUNW,qlc@2 selftest failed, return code = 1
but the probe of the SCSI bus does not and displays the drives:
{3} ok probe-scsi
This command may hang the system if a Stop-A or halt command
has been executed. Please type reset-all to reset the system
before executing this command.
Do you wish to continue? (y/n) y
LiD HA LUN --- Port WWN --- ----- Disk description -----
0 0 0 500000e010192d11 FUJITSU MAP3147FC 0110
1 1 0 21000014c320ff73 SEAGATE ST314670FSUN146G055A
How can we fix this problem?
Thanks.
S Kayal
Edited by: 923748 on Mar 27, 2012 10:59 AM
Edited by: 923748 on Mar 27, 2012 11:00 AM

I don't think the test-scsi command is viable for that platform.
The FC disks are "viewed" by the system as external to the SCSI controller, almost as if they were in a multi-pack.
They are FC drives addressed by the chipset as SCSI disks.
Try:
<pre>probe-scsi-all</pre>
Edit:
Which release of Solaris 10 are you trying to install?
Older releases that might be fine for V480's won't work on V490's.
Edited by: rukbat on Mar 27, 2012 2:35 PM

Solaris 10 installation failure from cd's

Hi All,
I am attempting to install Solaris 10 on my x86 laptop. I run the installation from cd #1 and go through the steps and installation will begin. I am choosing to install the entire distribution and when cd #1 finishes (about 500 mb of the 4000mb) the machine is not prompting for the other cd's. The machine will simply reboot and give "Solaris 10 installation partially failed."
Upon reboot the grub screen appears and it will load and then fail.
Any ideas? Am I missing a step somewhere? Thanks.

Hi All,
I am attempting to install Solaris 10 on my x86 laptop. I run the installation from cd #1 and go through the steps and installation will begin. I am choosing to install the entire distribution and when cd #1 finishes (about 500 mb of the 4000mb) the machine is not prompting for the other cd's. The machine will simply reboot and give "Solaris 10 installation partially failed."
Upon reboot the grub screen appears and it will load and then fail.
Any ideas? Am I missing a step somewhere? Thanks.

Installation Failed, Configuration Failed

Hi,
Here is my installation parameters
OS: Solaris 10 03/05 Global Zone
Software Group selected during installation of OS: Entire Group
(except Apache2, SJS Application Server Platform Edition, SJS Message Queue Platform Edition)
- no naming service configured
- no kerberos configured
- SRA not selected during installation
- Directory server without user data
- Portal Server 7 configured to run on SJS Applicaiton Server 8.1
- Access Manager configured to run on SJS Application Server 8.1
- no Internet connection
Hardware: Ultra-5 with 512MB Memory, 30G hard disk.
Output of Summary Report
Sun Java(TM) System Portal Server 7 2005Q4 : Installation Failed, Configuration Failed
Output of Configuration Log
Selected Components List = '[PortalServer]'
Configuration for '[PortalServer]' will happen now...
PortalServerConfigurator::generatePSConfigXMLFile(..) called...
/opt/SUNWportal/bin/psconfig
--config
/var/tmp/psconfig_ultra5_114137063367552338.xml
Command /opt/SUNWportal/bin/psconfig generated the following outputs:
Output Log:
Creating directory: /etc/opt/SUNWportal
Successfully created PSConfig.properties file
Copying config templates from: /opt/SUNWportal/template/config
Successfully created PortalDomainConfig.properties file
Validating the Input Config XML File
Configuring Cacao Agent for Portal Software
Error Log:
Configuration Failed : java.lang.NullPointerException
com.sun.portal.fabric.tasks.ConfigurationException: java.lang.NullPointerException
at com.sun.portal.fabric.config.PortalConfigurator.configureHost(PortalConfigurator.java:605)
at com.sun.portal.fabric.config.ConfigurePortal.main(ConfigurePortal.java:120)
Caused by: java.lang.NullPointerException
at com.sun.portal.fabric.config.PortalConfigurator.configureHost(PortalConfigurator.java:586)
... 1 more
Configuration failed for : PortalServer
*** End configuring PortalServer***
Anyone can help?

Yes, you do need 4GB of swap, but just to not scare anyone off, the installer won't actually use that much memory.
It needs that amount of backing store because during the install, there are several large Java processes forking other Java processes.
I've installed on systems with small memory configs just fine-- crank up the swap to 4GB+ during the install, then get rid of the swap after the install. The install will probably use some of that swap, and because of this may take quite a while to complete, but it will complete just fine.
Hope that helps,
- Matt

My ISW 6.0 Installation Fails

Hello,
I originally resurrected a long-dead forum thread from 2007 and attempted to hijack it away for my own question, but a kind forum moderator split it away to become a new question of its own (including reformatting the log excerpt for better readability).
I am trying to install ISW 6.0 sp1 on a Solaris machine with dsee7 already on it.
The installation fails at the very end with the following message:
"Installer cannot upload some entries in the template files. Check the installer's log file for further details."
Upon checking the logs at /var/sadm/install/logs, I see the following towards the end of log file:
LDAP Error: cn=AccountLockoutParam,ou=Templates,ou=GlobalConfig,ou=1.1,ou=IdentitySynchronization,ou=Services,o=isp: class violation
Expected to find 61 LDAP entries after uploading, but instead found 60
The installer could not upload some of the entries in the template files. Please check the installer's log file for further details.Any help would be greatly appreciated.

I suspect a schema problem in your directory, which prevents it from being updated to store the ISW config.
Do you see any error in the directory error log file ?

AmAgent: ERROR: Installation failed....corrupted state.

The environment in which we are installing the agents is:
Agent: J2EE Policy Agent ver. 2.2 update 5
Application Server: Sun Application version. 8.1
Application: Identity Manager 7.0
Java JRE: SDK 1.5.0_04
Operating System: Solaris-sparc
during the "agentadmin --install" execution, after providing the domain1/config and the server instance name, I get the following message. there is seems to be inconsistant config (in domain1/config??). I need pointer as to where agentadmin is looking so that I can proceed further in troubleshooting and resolving this issue.
*** ERROR: Installation failed due to the following error - (The agent
installation state for this Application Server is in corrupted state.
Unable to retrieve the agent state.).
Any pointers appreciated.
Edited by: northikan on Apr 14, 2008 12:49 PM

Just by a STAT() on domain1/config and the absence of .AmAgentLocator file, it has decided that the installation is corrupted.
Can any one make sense out of this?
The "\n" is the return is the response on the standard input on the question of the server instance name (defaults to "server")
21343/1: read(0, "\n", 8192) = 1
21343/1: fstat64(0, 0xFFBFE118) = 0
21343/1: ioctl(0, FIONREAD, 0xFFBFE210) = 0
21343/1: fstat64(0, 0xFFBFE150) = 0
21343/1: ioctl(0, FIONREAD, 0xFFBFE248) = 0
21343/1: stat64("/appl/iamagent/j2ee_agents/am_as81_agent/locale/com/sun/
identity/agents/tools/configurator/StringValidator.class", 0xFFBFD188) Err#2 ENO
ENT
21343/1: write(8, " [ 0 4 / 1 4 / 2 0 0 8 ".., 80)      = 80
21343/1: write(8, " [ 0 4 / 1 4 / 2 0 0 8 ".., 98)      = 98
21343/1: write(8, " [ 0 4 / 1 4 / 2 0 0 8 ".., 91)      = 91
21343/1: stat64("/appl/iamagent/j2ee_agents/am_as81_agent/locale/com/sun/
identity/agents/tools/appserver/v81/HomeDirLocator.class", 0xFFBFD490) Err#2 ENO
ENT
21343/1: stat64("/appl/iamagent/j2ee_agents/am_as81_agent/locale/com/sun/
identity/agents/tools/configurator/IServerHomeDirLocator.class", 0xFFBFB860) Err
#2 ENOENT
21343/1: stat64("/appl/spool/iam-b2e/SUNWappserver/domains/domain1/config
", 0xFFBFE650) = 0
21343/1: stat64("/appl/spool/iam-b2e/SUNWappserver/domains/domain1/config
", 0xFFBFE650) = 0
21343/1: write(8, " [ 0 4 / 1 4 / 2 0 0 8 ".., 140)     = 140
21343/1: stat64("/appl/spool/iam-b2e/SUNWappserver/domains/domain1/config
/.amAgentLocator", 0xFFBFE7F8) Err#2 ENOENT
21343/1: write(8, " [ 0 4 / 1 4 / 2 0 0 8 ".., 215)     = 215
21343/1: write(8, " [ 0 4 / 1 4 / 2 0 0 8 ".., 81)      = 81
21343/1: write(8, " [ A g e n t I n s t a l".., 1164)    = 1164
21343/1: write(1, "\n", 1) = 1
21343/1: write(1, " * * *", 3) = 3
21343/1: write(1, " ", 1) = 1
21343/1: write(1, " E R R O R :", 6) = 6
21343/1: write(1, " ", 1) = 1
21343/1: write(1, " I n s t a l l a t i o n", 12) = 12
21343/1: write(1, " ", 1) = 1

Camera Raw 6.7 Update for Mac OS 10.10: Installation Failed error message.

Camera Raw 6.7 Update for Mac: Installation Failed error message. Update downloaded directly from Adobe website. Newly purchased Mac Workbook Pro, OS 10.10, using Photoshop CS5. Other updates successfully accomplished. Camera Raw 6.7 Update was downloaded multiple times with multiple installation attempts. Any recommendations?

thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again.

I purchased and downloaded Photoshop Elements 13, but the installer fails to initialise. How do I get it to work?

I have Photoshop Elements 10 and Premier Elements 10 installed on my PC. Both were installed from discs that I bought a few years ago. I recently purchased the upgrade (by download) for both applications to version 13. In accordance with the (scant) instructions received by email, I downloaded the four files required from the Adobe site. I subsequently ran the .exe files, which in turn created directories on my PC, including set-up.exe files for both applications. When I run the setup files, I get an error message stating that the installer failed to initialise. The error message advised me to download the Adobe Support Advisor to detect the problem. That tool does not exist. I then sought assistance from the Abobe support site, initially using the hyperlink suggestions, which were of no use, then using the chat function. The operator kept trying to get me to do something with something called 'Creative Cloud'; which I am not familiar with, and do not use. He then instructed me to download and run a CS5 cleaner tool; however, none of the choices offered by that tool include my issue, or either Photoshop Elements or Premier Elements. I am reluctant to uninstall version 10 of the programs in case I end up losing the lot and therefore wasting even more money than the purchase price for this upgrade.
All I want to do is upgrade my two applications from version 10 to version 13. I have paid the requisite fee but it clearly does not work. I appear to have totally wasted my money. Can anyone please tell me how to get it to work? I do not want to have anything to do with the so-called ‘Creative Cloud’ as I have no idea what it is, and I do not want to lose what I already have (and have paid for previously).
I have tried for a few days to access the so-called 24/7 chat assistance but appeared to have been locked out as every time I try to access it, I get a message that the (24/7) chat is closed. Adobe has taken my money for a product that does not work, and also refuse to help me fix it.
I am very frustrated with a product I bought that does not work, and a 24/7 support service that clearly is not 24/7, and which refuses to assist me. Can anyone PLEASE tell me how to get this to work? Rod.

Hi,
Can you please share the logs?
You can use the Adobe Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
Thanks,
Shikha

How do I fix the following error Photoshop 13.1.2 for Creative Cloud Installation failed. Error Co

Photoshop 13.1.2 for Creative Cloud
Installation failed. Error Code: U44M1P7

What is the current version of Ps (Help->System Info), if you have 13.0.1.2 already applied then you need to re-install Ps to get Ps 13.1.2.
As 13.1.2 is a subscription patch this would not get applied over 13.0.1.2.
If this still does not resolves your issue, Kindly mail me installer logs.
For Mac:
"Library/Logs/Adobe",
For Win:
Program Fies(x86)\Common Files\Adobe\Installers
Please mail me @ [email protected]
Regards,
Ashutosh

What causes this message "Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7"?

What causes error code: U44M1P7? I have rebooted my machine multiple times and continue to get the same results.

Photoshop: Basic Troubleshooting steps to fix most issues
ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7

What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7
I found the manual update, which worked!
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5595&fileID= 5604

Hi Barbara,
For failed 13.1.2 update error U44M1P7, Please refer to the solution mentioned in the following threads :
http://forums.adobe.com/message/5396792#5396792
http://forums.adobe.com/message/5409050#5409050

Solaris 10 - b58 installation fails

Similar Messages

Maybe you are looking for