Solaris 10 fails to install

Trying to install Solaris 10 (Latest release) on an Enterprise 4500. The install fails. The installation starts, then in lower console window, it says exitsing install and opens a terminal session. Doesn't say why it exited, just quits. Any ideas?

I'm still downloading b69 sparc, so can't say it is the release.
But have seen this before with X86 releases.
Assume this happens installing the first CD.
Does Upper left screen reports a complete installation ?
Did you see something like segmentation fault after this ?
Does the system boot in text mode, after this braek ?

Similar Messages

Fresh solaris 10 x86 install patch update problems 119060-17 ...

Just yesterday, i installed a fresh Solaris 10 x86 onto some pc hardware. After getting solaris installed and issues with my network card, i downloaded and installed the free version of the update manager 1.0.x. Next, i proceeded to update all the general patches for the solaris 10 system. I started with the command 'pprosvc -i' from a terminal. It then proceeded to download and validate a bunch of patches successfully until it hit the following 3 patches:
119060-17 ---- X11 6.6.2_x86: Xsun patch
122213-10 ---- GNOME 2.6.0_x86: GNOME Desktop Patch
122912-02 ---- SunOS 5.10_x86: Apache 1.3 Patch
All 3 failed some kind of validation and then crashed the pprosvc program, at which point it exited with the following error:
122912-02 cannot be validated
119060-17 cannot be validated
122912-02 cannot be validated
Unexpected Failure: java.lang.Throwable: ERROR: Failed to validate the digital signature(s).
I also tried to use the GUI Update Manager to update, hoping the problem was isolated to pprosvc, but that problem was also in the GUI with a similar error message:
Error occurred...The detailed error message is: Unexpected Failure: java.lang.Throwable: ERROR: Failed to validate the digitial signature(s)
Anyone know why Sun's update patch process is so troublesome?
Getting Tired of Solaris Updates...
I should mention that this is the free solaris 10 x86 install and i don't have a service contract with Sun. If this problem persists, i don't think i'll get one, as i see only further problems after buying one.
tired and confused

Hi,
There is an issue with this that is currently being investigated. There is another thread that may shed some light on what is happening here;
http://forum.sun.com/jive/forum.jspa?forumID=316
Thread title is : Sun UC, Digitally Signed Patches Using New Verisign Certificates
In the short-term please ensure that the patch mentioned in it is installed.
To quote part of mentioned thread above:
"Once the Sun Update Connection client software is upgraded with patch 121118-06 (SPARC) or 121119-06 (x86/x64) or later revisions normal behavior will resume. "
If this fails to resolve your problem, would you be kind enough to post the output of the following command for analysis please;
# showrev -p | egrep -e '121454|121119|120336|121082|121564|122232|119789'
Sincerely,
Moderator.
Message was edited by:
ForumModerator

Solaris Express Zone install error with SUNWiiimr and SUNWcnetr

Hi all,
I got these errors when installing a new zone on a Solaris Express 1/08 (5.11) on a x64 box:
Installation of these packages generated errors: SUNWiiimr
Installation of these packages generated warnings: SUNWcnetr
The zone creation log shows:
*** package -SUNWiiimr- failed to install with fatal errors:
/export/zones/newzone/root/var/sadm/pkg/SUNWiiimr/install/postin stall: /export/zones/newzone/root/lib/postrun: not found
/export/zones/newzone/root/var/sadm/pkg/SUNWiiimr/install/postinstall: /export/zones/newzone/root/lib/postrun: not found
pkgadd: ERROR: postinstall script did not complete successfully
Installation of -SUNWiiimr- on zone -newzone- failed.
*** package -SUNWcnetr- installed with warnings:
pkgadd: ERROR: unable to create package object -/export/zones/newzone/root/etc/dladm-.
owner name -dladm- not found in passwd table(s)
ERROR: attribute verification of -/export/zones/newzone/root/etc/dladm/aggregation.conf- failed
owner name -dladm- not found in passwd table(s)
ERROR: attribute verification of -/export/zones/newzone/root/etc/dladm/linkprop.conf- failed
owner name -dladm- not found in passwd table(s)
ERROR: attribute verification of -/export/zones/newzone/root/etc/dladm/secobj.conf- failed
owner name -dladm- not found in passwd table(s)
Installation of -SUNWcnetr- on zone -newzone- partially failed.
-newzone- was configured to be a whole root zone. Are there any ways to solve these installation errors?
Thanks in advance.

This problem seems some strange - this time with Solaris 10u4, from 10 containers installed on a brand new X2200 (2x cpu) only one do not output those errors, but just this one cannot install the dsee or proxy. This time the errors were from:
Installation of <SUNWxwplr> on zone <dsee-proxy> partially failed.
Installation of <SUNWdtdmr> on zone <dsee-proxy> partially failed.
Installation of <SUNWmconr> on zone <dsee-proxy> partially failed.
Installation of <SUNWrmwbr> on zone <dsee-proxy> partially failed.
Installation of <SUNWlvmr> on zone <dsee-proxy> partially failed.
Installation of <SUNWzebrar> on zone <dsee-proxy> partially failed.
So the machine was, too, just installed. After several hours, anoter atempt to install a zone, this time just this one, returned no errors - and the dsee installed without any complains. All configurations were for whole root zones. Used was Solaris 10u4 with the most recent patch cluster applied.

Smpatch update ALERT: Failed to install patch

I do not even know where to start. Since installing Solaris 10 0606 it
seems every time I try to patch the system I get failures of one type
or another. One problem today has to do with zones:
"To install the new instance of this package in all zones you must
first remove the existing instance of this package from the global
zone first (via pkgrm) and then install the new instance of this
package in all zones."
If sun already knows a pkgrm must be run why can't the smpatch command
just do it?
Another problem seems to be
For patch 121018-03, required patch 120759-04 does not exist
If sun knows a patch is required which is not on the system just Getit
and install it.
Also, what is up with having to reboot the box to install patches?
Why? Has this always been a required step? Do these reboots pertain only to kernel patches .etc?
I have seen other postings in this forum expressing unhappiness with
the patch system, some mentioning testing lab/group or certification
issues. I think smpatch should have an option to send smpatch results
back to sun for review. That way the Certification Group could have
real life situations to investigate. Or do they know the problems
already and just dont want to fix them? Just once I would love it if
smpatch came back with no failures and I was assured the system was
patched, up to date and secure.
Regards
# smpatch update
Update 120759-07 will not be downloaded since it already exists in the
download directory.
Update 121018-03 will not be downloaded since it already exists in the
download directory.
Update 121016-03 will not be downloaded since it already exists in the
download directory.
Update 121020-02 will not be downloaded since it already exists in the
download directory.
Update 121616-02 will not be downloaded since it already exists in the
download directory.
Update 120762-02 will not be downloaded since it already exists in the
download directory.
Installing patches from /var/sadm/spool...
Failed to install patch 120759-07.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!Approved patches will
be installed in this order:120759-07 Preparing checklist for
non-global zone check...Checking non-global zones...The following
requested patches rejected on non-global zone.Entire installation is
possible but those patcheswill not be installed on non-global
zone.myzone: Packages from patch 120759-07 are not installed on the
system.myzone2: Packages from patch 120759-07 are not installed on the
system.This patch passes the non-global zone check.None.Summary for
zones:Zone myzoneRejected patches:120759-07 Patches that passed the
dependency check:None.Zone myzone2Rejected patches:120759-07 Patches
that passed the dependency check:None.Patching global zoneAdding
patches...Checking installed patches...Verifying sufficient filesystem
capacity (dry run method)...Patch 120759-07 failed to install due to a
failure produced by pkgadd.See /var/sadm/patch/120759-07/log for
detailsPatchadd is terminating. WARNING: patchadd returned <5> for
global zone
ALERT: Failed to install patch 120759-07.
Failed to install patch 121018-03.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!The following
requested patches will not be installed becauseno patches required by
the patch are installed on this system. 0 For patch 121018-03,
required patch 120759-04 does not exist.No patches to install.
ALERT: Failed to install patch 121018-03.
Failed to install patch 121016-03.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!The following
requested patches will not be installed becauseno patches required by
the patch are installed on this system. 0 For patch 121016-03,
required patch 120759-06 does not exist.No patches to install.
ALERT: Failed to install patch 121016-03.
Failed to install patch 121020-02.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!The following
requested patches will not be installed becauseno patches required by
the patch are installed on this system. 0 For patch 121020-02,
required patch 120759-01 does not exist.No patches to install.
ALERT: Failed to install patch 121020-02.
Failed to install patch 121616-02.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!Approved patches will
be installed in this order:121616-02 Preparing checklist for
non-global zone check...Checking non-global zones...The following
requested patches rejected on non-global zone.Entire installation is
possible but those patcheswill not be installed on non-global
zone.myzone: Packages from patch 121616-02 are not installed on the
system.myzone2: Packages from patch 121616-02 are not installed on the
system.This patch passes the non-global zone check.None.Summary for
zones:Zone myzoneRejected patches:121616-02 Patches that passed the
dependency check:None.Zone myzone2Rejected patches:121616-02 Patches
that passed the dependency check:None.Patching global zoneAdding
patches...Checking installed patches...Verifying sufficient filesystem
capacity (dry run method)...Patch 121616-02 failed to install due to a
failure produced by pkgadd.See /var/sadm/patch/121616-02/log for
detailsPatchadd is terminating. WARNING: patchadd returned <5> for
global zone
ALERT: Failed to install patch 121616-02.
Failed to install patch 120762-02.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!Approved patches will
be installed in this order:120762-02 Preparing checklist for
non-global zone check...Checking non-global zones...The following
requested patches rejected on non-global zone.Entire installation is
possible but those patcheswill not be installed on non-global
zone.myzone: Packages from patch 120762-02 are not installed on the
system.myzone2: Packages from patch 120762-02 are not installed on the
system.This patch passes the non-global zone check.None.Summary for
zones:Zone myzoneRejected patches:120762-02 Patches that passed the
dependency check:None.Zone myzone2Rejected patches:120762-02 Patches
that passed the dependency check:None.Patching global zoneAdding
patches...Checking installed patches...Verifying sufficient filesystem
capacity (dry run method)...Patch 120762-02 failed to install due to a
failure produced by pkgadd.See /var/sadm/patch/120762-02/log for
detailsPatchadd is terminating. WARNING: patchadd returned <5> for
global zone
ALERT: Failed to install patch 120762-02.
/var/sadm/spool/patchpro_dnld_2006.08.22@11:16:20:EDT.txt has been
moved to
/var/sadm/spool/patchproSequester/patchpro_dnld_2006.08.22@11:16:20:EDT.txt
#

Enterprise users have strict policies on change management so dependent patches are not automatically installed when using "smpatch add". Neither are packages blithly uninstalled for zones if currently only existing in the global zone.
For your needs using "smpatch update" should analyse, download and install dependant patches in order for patches specified on the command line or for a global update. Note that that is with the exception of patches not matching the currently defined patch policy such as those needing a reboot. See the smpatch man page for information on policies.
Patches requiring reboots or being installed in single user mode are primarily for kernel and driver patches.
Your problems installing the Sun Studio 11 patches have been encountered previously in regards to globally installed packages (and are covered in this forum) and is due to a combination of bug ID's 6337009, 6214678 and 6374972 for the patching utilities of which the last is still open.
You will currently have to manually install the patches using patchadd with the "-G" flag whilst in the global zone to install them in the global zone only.

Failed to install a local copy of ias60.jar

Hello,
could anybody help me with this problem.
We have installed under Solaris: iPlanet Webserver6.0, Directory Server5.1 and Application Server6.5. In the console it is not possible to select iPlanet Application Server. Message: Class Loader Error:Failed to install a local copy of ias60.jar or one of its supporting files.
What can I do?
Thanks Juergen

Hi,
I'm not sure what console means, I assume it's the iAS registry tool, kregedit. Are you getting this error at the terminal windows ?
Normally, ias60.jar would be located in <ias-install root>/ias/java/jars/ias60.jar and <ias-install root>/java/jars/ias60.jar. Check in these two directories, also review the path settings in the iasenv.ksh file under <ias-install root>/ias/env. Please let me know if this helps.
Regards
Ganesh .R
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support

Smpatch update ALERT: Failed to install patch 121616-02

I am getting various Failed to install patch alerts when doing smpatch update. Many patches are aparently applied successfuly, but others are not. I do not have Sun Support since it is my personal X86 box. Are other people getting these failures? If so, what is done to investigate / fix the problems? If I had support what would Sun recommend be done to correct the problem? Should smpatch always run clean with no errors? Regards.

I will post to the other forum as well, but I can't think of a more "general" Solaris discussion topic than how to / what to expect when applying patches. I am not sure I agree with your comment "it's best to only install the patches that are really needed". I thought smpatch update "decided" which patches are needed given the system it is run on.
Is your comment based upon best practices published somewhere? How do you as a sysAdmin decide which patches are really needed?
I would like to hear from the community how they patch their boxes and if smpatch is working for them, especially in a production environment. I have a stand alone system, but how are people in an environment with test systems patching? Are they using smpatch? In general, how are people keeping their systems updated, reliable, bug free and secure?
Regards,

Failed to install the patch 113886-38, 113887-38

Hi all,
I just tried to install the J2SE Solaris 9 Recommented Patch Cluster, while, when it come to install the patch 113886-38, 113887-38, it got an an error message:
Installing 113886-38...
Checking installed patches...
One or more patch packages included in
113886-38 are not installed on this system.
Patchadd is terminating.
Installing 113887-38...
Checking installed patches...
ERROR: This patch requires patch 113886-38
which has not been applied to the system.
Patchadd is terminating.
The O/S version info:
SunOS rtd5p02 5.9 Generic_118558-27 sun4u sparc SUNW,Sun-Fire-880
Our system was just upgraded from solaris 8 to solaris 9, and I donnt know why it was failed, appreciate if any idea about the cause.
Yukun

Hello Yukun,
The reason that patch 113887-38 is failing to install
is that patch 113886-38 has not been installed. As
this is a dependancy patch of 113887-38, this patch
will not install.
Please can you run the following commands and return
the output generated:
showrev -p | grep 113886-38
find . -name 113886-38
patchadd /patch_to_patch/113886-38
Regards,
Yup, my problem is the patch 113886-38 was failed to install.
The error message is:
================================
Installing 113886-38...
Checking installed patches...
One or more patch packages included in
113886-38 are not installed on this system.
Patchadd is terminating.
=================================

Failed to install a patch. 120445-01

I just started using "smpatch". Very cool. However, I have a single patch that keeps on popping up which won't install under any circumstance. Is there any way to disable this patch or get it to install?
I'm installing on a V440 with Solaris 9. Here's the error I'm getting:
Aug 9 21:56:12 boffo root: => Thread[Thread-18,5,main] <=Problem installing patches: Received a Manipulable event.
Aug 9 21:56:13 boffo root: => com.sun.patchpro.util.PatchBundleInstaller@a6997 <=Failed to install a patch. 120445-01
Aug 9 21:56:13 boffo patchadd utility failed. Reason code :0
Aug 9 21:56:13 boffo Checking installed patches...One or more patch packages included in 120445-01 are not installed on this system.Patchadd is terminating.
Aug 9 21:56:13 boffo root: [ID 702911 user.alert] => com.sun.patchpro.util.PatchBundleInstaller@a6997 <=Failed to install a patch. 120445-01
Aug 9 21:56:13 boffo patchadd utility failed. Reason code :0
Aug 9 21:56:13 boffo Checking installed patches...One or more patch packages included in 120445-01 are not installed on this system.Patchadd is terminating.
Aug 9 21:56:13 boffo root: => Thread[Thread-18,5,main] <=Problem installing patches: ALERT: Failed to install the patch {0}. 120445-01
ALERT: Failed to install the patch {0}. 120445-01

These are the only packages that don't start with "SUNW":
system      IPLTadcon                        Administration Server Console
system      IPLTadman                        Administration Server Documentation
system      IPLTadmin                        Administration Server
system      IPLTcons                         Console Client Base
system      IPLTdscon                        Directory Server Console
system      IPLTdsman                        Directory Server Documentation
system      IPLTdsr                          Directory Server (root)
system      IPLTdsu                          Directory Server (usr)
system      IPLTjss                          Network Security Services for Java
system      IPLTnls                          Nationalization Languages and Localization Support
system      IPLTnspr                         Portable Runtime Interface
system      IPLTnss                          Network Security Services
system      IPLTpldap                        PerLDAP
application NSCPcom                          Netscape Communicator

Recommended patch 125541-02 fails to install

Patch 125541-02 fails to install. When it is running patchadd perhaps, it complains that the dependency package SUNWthunderbird is not present. I am not inclined to search and add support for it unless it is necessary. I tried it five different hosts running Solaris 10. The results are the same.

I had exactly the same results on a Sun Blade running Sol 10 11/06. The patch will not install using update manager, or with smpatch add -i, or from the manually downloaded patch using patchadd.
The following requested patches have packages not installed on the system
Package SUNWthunderbird from directory SUNWthunderbird in patch 125541-02 is not installed on the system. Changes for package SUNWthunderbird will not be applied to the system.

Patch 124171-01 fails to install

Patch 124171-01 fails to install on an Ultra-80 and a V210 models. I installed it manually to get the message that the "SUNWscnbase-r" package is not installed so the patch is aborted.
The Ultra-80 runs Solaris 10 release 03/2005. The V210 runs Solaris 10 01/2006. I typically load everything in the installs so this patch should not have been recommended to them.

root hypert /var/sadm/spool # smpatch analyze
124187-01 SunOS 5.10_x86: flash issue with SUNWscn-base due to broken package
Maybe the patchinfo wasn't specific enough?
root hypert /var/sadm/spool/124187-01.jar.dir/124187-01 # more patchinfo
PATCHINFOVERSION="1.0"
PATCHID=124187-01
PATCH_CORRECTS='BaseOS.SolarisCore-5.10'
PATCH_ARCH='i386'
PATCH_OS='SunOS'
PATCH_OSRELEASE='5.10'
PATCH_PROPERTIES='clientroot'
This seems to indicate all Solaris 10 systems would need this patch - but I don't know if UM uses this info when deciding which patches to recommend.

10.6.2 failed to install due to 'nfs error', audio no longer works

macbook pro, all other updates have installed just fine, except for 10.6.2
I get this in the log:
11/10/09 3:58:15 PM com.apple.kextcache410 Created mkext archive //System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext.
11/10/09 3:58:15 PM com.apple.kextcache403 Failed to mount helper partition: error 0XF8DA000C (DA err# 0x0c).
11/10/09 3:58:15 PM com.apple.kextd10 kextcache error while updating / (error count: 4)
11/10/09 3:58:15 PM com.apple.kextcache403 /: trouble updating one or more helper partitions.
11/10/09 3:58:15 PM com.apple.kextd10 async child pid 403 exited with status 70
11/10/09 3:58:15 PM com.apple.kextd10 kextcache error while updating / (error count: 5)
11/10/09 3:58:15 PM installd376 PackageKit: Install Failed: (null)
Error Domain=PKInstallErrorDomain Code=121 UserInfo=0x104d22740 "An error occurred while updating system extension information." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=70 "The operation couldn’t be completed. Stale NFS file handle") {
NSLocalizedDescription = "An error occurred while updating system extension information.";
NSUnderlyingError = "Error Domain=NSPOSIXErrorDomain Code=70 \"The operation couldn\U2019t be completed. Stale NFS file handle\"";
arguments = (
"-update-volume",
nothing is mounted (i rebooted before applying). not sure why it's giving that NFS error. it's consistent tho.. if i reboot and try the manual install of the patch, I get the same error.
after the failed patch "installed" it left my sound not working... so far everything else appears to work. any thoughts on fixing this are appreciated. i ran diskutil and 'fixed perms' and 'verified disk' ... patch still fails.

Try reinstalling the patch. If you get all the way through the installation, then see if your sound works. If not, then I suggest you do a repair install of Sno by installing Sno over Sno as in an upgrade install. Such an install, while usually very safe, still is an install so be appropriated backed up if you proceed.

Failed to install Creative Cloud desktop error code 1 Windows 8.1

I just recently tried to begin a trial of creative cloud in order to get access to photoshop. I really need photoshop for my school because of how powerful it is and the tools is offers. A couple weeks ago I tried to download and install creative cloud for windows 8 64-bit, and the download begins, but once it reaches around 50%, it raises an error message saying "We've encountered the following issues: Creative Cloud desktop failed to install (error code 1)". I was having problems with the internet at the time so I just naturally assumed it was the cause. So I went ahead and gave it a couple of days before I tried again. When I tried again I received the same error message at the same time. I continued to look around for a solution and trying it everyday but I have had absolutely no luck with it, and honestly am getting quite frustrated with it. I have looked everywhere for a solution, I tried the adobe clenup tool, I have checked to make sure I don't have any previous versions of adobe products on my computer, and even tried installing it as an admin in safe mode, and still nothing. I have no idea what to do next, but I know that I have to get ahold of photoshop, one way or another, and it must have the professional tools included in the creative cloud edition. Please tell me there is a simple solution and I have been blind this entire time. If there is no solution, can someone direct me to another software similar to photoshop that has access to the plug-in dDo? (I am in game development and have heard how powerful dDo is and have been dying to use it. I have also been anxious to get photoshop, but it doesn't appear to be possible without the creative cloud desktop app).

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

HP C1680 fails to install Software

Can you please help
I have just reinstalled my operating system Windows 7 6- bit OS and needed to reinstall my printer HP Photosmart C6180 All in One. When I first got my new PC( Dell XPS 501L windows 7 Intel core i5. 243M 2.40GHz) I originally install the whole package with no issues.
after the reinstall of the OS, this is issue I was I getting when I tried to reinstalled the HP application (AIO_CDA_FSW_Full_Win_WW_130_140.exe )
Error message:-
C:\Users\andylouey\AppData\Local\Temp\7zS4864\setup\HPzPNP.ice.
I have done the following:
Tried to install from an old download of the software. Result Failed to install message as above.
Tried the original install CD and also tried to use them in various compatibility modes. Result Failed.
Downloaded the critical updates from HP solved the above error message result the above error message was solved.
Downloaded the latest install software program for my HP printer from the HP website tried again to install failed
Ran the HP Scan doctor reported that the printer drivers are all working asked it to run the scan program it reported that it need the full install of the C1680 software to run this
I got the download again ran it. It extracts the file then just disappears and looking at the task manager there is not install running. So again failed
For the second time I downloaded the HP installer network printer wizard but this failed and just keeps going round in circles> It finishes the download gets to the extracting point and then goes back to the identify printer( which is listed) then goes back once again and downloads the install software.
Other steps I have taken. I used the old installation disk to do a complete uninstall of all the drivers and software using Utilities> CCC> Uninstall_ L2.bat . This wored and uninstalled the printer and drivers and I think any remaining software. I also deleted all the %TEMP% files that my Laptop would allow.
Then once again I I used the install wizard first without the USB cable disconnected then the wizard asked me to plug it in. I plugged it in and HP Wizard found the printer and downloaded the appropriate software completed the download and extracted it and then NOTHING.
I have also downloaded the critical update:-
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-126392-2&cc=uk&dlc=en&lc=en...
Can you suggest a solution help. In my view I need to start from scratch and remove all traces of any HP software and drivers and start over. My only issue with this I have done this and still have the same issues. If I go to Microsoft uninstall utility there isn’t anything to uninstall.
Thanks in advance for your reply.
PS. HP wizard has finished downloading for the fourth time and looping to discovering the device again :-( HELP!!!!!!!!
Thanks in adbance for your replies Andy

Hi
Thank you for your reply and your advice and help
If you look at my help request aboveI have described that I have done your suggetion and yet there are still traces of HP on my hard drive and I am still haveing the same issues.
Below are the steps you have referred to which I covered in my original request :-
Other steps I have taken. I used the old installation disk to do a complete uninstall of all the drivers using CCC> Utilities and Uninstall_L3 . I also deleted all the %TEMP% files (7z) that my Laptop would allow.
Then once again I I used the install wizard first wit the USB cable disconnected then the wizard asked me to plug it in. I plugged it in and HP Wizard found the printer and downloaded the appropriate software completed the download and extracted it and then NOTHING. Except the drivers were installed and the printer was shown in the devices and printers.
I have also downloaded the critical update:-
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-126392-2&cc=uk&dlc=en&lc=en...
Can you suggest a solution help. In my view I need to start from scratch and remove all traces of any HP software and drivers and start over. My only issue with this I have done this and still have the same issues. If I go to Microsoft uninstall utility there isn’t anything to uninstall.
I can print to the printer both wirelessly and via the USB port. But the Solution center will not install just keeps looping. ie idenifies the printer downloads the latest sofware and extracts it then just dissapears of the screen. Nothing comes up and there are no HP programs running in the applications task manager and no processes either.
Thank you in advance for your reply. Regards Andy

Kb2920189 fails to install on Windows 2012 R2 Essentials

Hello,
I have a 2012 R2 Essentials server that fails to install the UEFI KB2920189 update. All other updates installed fine. It's running two disks, one has 8.1 the other has 2012 R2 Esssentials in dual boot mode. No VM. I have heard reports
of successful installs of this kb2920189 update that basically bricks the OS on reboot. I would like to avoid this. The error code during the failed installation is 800F0922.
Thanks

Hi,
Based on your description, I understand that you failed to install KB2920189 with error 800F0922.
Please refer to following operations and check if can help you to solve this issue.
Refer to the KB (KB947821), and use the inbox Deployment Image Servicing and Management (DISM) tool. Then install
this update again.
Please
reset Windows Update components and monitor the result.
Please perform a
clean boot and check if you can install this update successfully.
If this issue still persists, please navigate to: %windir%\Windowsupdate.log and check the log file if can
find some more clues.
For more details, please refer to the following KB.
How to read the Windowsupdate.log file
Hope this helps.
Best regards,
Justin Gu

Fail to install Distibution Point on Windows Server 2012

I have been trying to install a distribution point via sccm 2012 on a windows 2012 server. I keep getting errors about the drive not found (distribution manager failed to verify drive specified by user on distribution point) and it won't install. It worked
on all the other servers I tried, but this one keeps giving trouble.
Does anyone have any idea as to the cause?
I put an extract of the log file here:
Get site system FQDN and account information from DB for ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:18 5848 (0x16D8)
Get site system FQDN and account information from DB for ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:19 5848 (0x16D8)
Failed to get SMS_DistributionPoint object SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:20 5848 (0x16D8)
DPConnection::Connect: For ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\, logged-on as SESVANDERHAVE\svc_scom_msaa SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:32 3724 (0x0E8C)
ConfigureDP SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:32 3724 (0x0E8C)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:44 1724 (0x06BC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:49 1724 (0x06BC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:54 1724 (0x06BC)
DP registry settings have been successfully updated on HUSOWINFP01.sesvanderhave.net SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:05 3724 (0x0E8C)
STATMSG: ID=9500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=3724 GMTDATE=di dec 31 12:57:05.905 2013 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 31/12/2013
13:57:05 3724 (0x0E8C)
STATMSG: ID=9503 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=3724 GMTDATE=di dec 31 12:57:05.905 2013 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 31/12/2013
13:57:05 3724 (0x0E8C)
ConfigurePXE SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:05 3724 (0x0E8C)
Failed to get SMS_DistributionPoint object SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:07 3724 (0x0E8C)
CDistributionManager::ConfigurePXE failed; 0x80041002 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:07 3724 (0x0E8C)
No need to initialize monitoring task on HUSOWINFP01.sesvanderhave.net SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:16 3724 (0x0E8C)
Creating, reading or updating IIS registry key for a distribution point. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
IISPortsList in the SCF is "80". SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
IISSSLPortsList in the SCF is "443". SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
IISWebSiteName in the SCF is "". SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
IISSSLState in the SCF is 224. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
DP settings have been updated to HUSOWINFP01.sesvanderhave.net. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:21 3724 (0x0E8C)
DPConnection::Disconnect: Revert to self SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:22 3724 (0x0E8C)
Sleep 1231 seconds... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:22 3724 (0x0E8C)
Failed to get SMS_DistributionPoint object SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:22 5848 (0x16D8)
Found notification for package 'SES00003' SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Found notification for package 'SES00004' SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Package Thread Limit: 3 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Retry interval: 30 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
DP upgrade thread Limit: 5 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
DP upgrade retry interval: 20 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Starting package processing thread, thread ID = 0x2274 (8820) SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Starting package processing thread, thread ID = 0x9B8 (2488) SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 3724 (0x0E8C)
Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 3724 (0x0E8C)
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=8820 GMTDATE=di dec 31 12:57:33.112 2013 ISTR0="SES00003" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00003" SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 8820 (0x2274)
Retrying package SES00003 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 8820 (0x2274)
No action specified for the package SES00003. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 8820 (0x2274)
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=2488 GMTDATE=di dec 31 12:57:33.112 2013 ISTR0="SES00004" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00004" SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 2488 (0x09B8)
Retrying package SES00004 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 2488 (0x09B8)
No action specified for the package SES00004. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 2488 (0x09B8)
Start adding package to server ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
Start adding package to server ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 7936 (0x1F00)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 3404 (0x0D4C)
The distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ is not installed or upgraded yet. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 7936 (0x1F00)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 7936 (0x1F00)
The distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ is not installed or upgraded yet. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 3404 (0x0D4C)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 3404 (0x0D4C)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
Thread Handle = 00000000000031DC SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
DP thread with thread handle 00000000000031DC and thread ID 7936 ended. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
Thread Handle = 00000000000016A8 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
DP thread with thread handle 00000000000016A8 and thread ID 3404 ended. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
Package SES00003 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
The package and/or program properties for package SES00003 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=SES00003, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
Package SES00004 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
The package and/or program properties for package SES00004 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=SES00004, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
StoredPkgVersion (1) of package SES00003. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
SourceVersion (1) of package SES00003. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=8820 GMTDATE=di dec 31 12:57:36.247 2013 ISTR0="Configuration Manager Client Package" ISTR1="SES00003"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00003" SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820
(0x2274)
Failed to process package SES00003 after 1 retries, will retry 99 more times SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
StoredPkgVersion (1) of package SES00004. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
SourceVersion (1) of package SES00004. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=2488 GMTDATE=di dec 31 12:57:36.282 2013 ISTR0="Configuration Manager Client Upgrade Package"
ISTR1="SES00004" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00004" SMS_DISTRIBUTION_MANAGER 31/12/2013
13:57:36 2488 (0x09B8)
Failed to process package SES00004 after 1 retries, will retry 99 more times SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)

I uninstalled the WDS according to the information on this site: http://myitforum.com/myitforumwp/2011/11/08/configmgr-2012-no-need-to-manually-install-wds/
But it still keeps giving me errors about the disk not being valid, it does that wether I choose a disk or leave the default values.
DPConnection::Connect: For ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\, logged-on as SESVANDERHAVE\svc_scom_msaa SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:33 2964 (0x0B94)
ConfigureDP SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:33 2964 (0x0B94)
Upgrading DP with ID 16777238. Thread 0x1bdc. Used 1 threads out of 5. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:50 7492 (0x1D44)
Processing 16777238.INS SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:50 7132 (0x1BDC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:50 7492 (0x1D44)
DPID 16777238 - NAL Path ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ , ServerName = HUSOWINFP01.SESVANDERHAVE.NET, DPDrive = D:, IsMulticast = 0, PXE = 1, RemoveWDS = 0 SMS_DISTRIBUTION_MANAGER 6/01/2014
8:49:50 7132 (0x1BDC)
Created policy provider trigger for ID 16777238 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:50 7692 (0x1E0C)
DPConnection::Connect: For ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\, logged-on as SESVANDERHAVE\******** SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:54 7132 (0x1BDC)
Failed to find a valid drive on the distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:55 7132 (0x1BDC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:55 7492 (0x1D44)
DPConnection::Disconnect: Revert to self SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:56 7132 (0x1BDC)
Failed to install DP files on the remote DP. Error code = 15 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:56 7132 (0x1BDC)
Drive D: is not valid. Error = 15 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:56 7132 (0x1BDC)
STATMSG: ID=2360 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=7132 GMTDATE=ma jan 06 07:49:56.907 2014 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="HUSOWINFP01.SESVANDERHAVE.NET" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 6/01/2014
8:49:56 7132 (0x1BDC)
Will try again after 20 mins ... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:56 7132 (0x1BDC)
DP registry settings have been successfully updated on HUSOWINFP01.sesvanderhave.net SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964 (0x0B94)
STATMSG: ID=9500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=2964 GMTDATE=ma jan 06 07:49:58.295 2014 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964
(0x0B94)
STATMSG: ID=9503 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=2964 GMTDATE=ma jan 06 07:49:58.295 2014 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964
(0x0B94)
ConfigurePXE SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964 (0x0B94)
Failed to get SMS_DistributionPoint object SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964 (0x0B94)
CDistributionManager::ConfigurePXE failed; 0x80041002 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964 (0x0B94)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:00 7492 (0x1D44)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:05 7492 (0x1D44)
Initialize monitoring task on HUSOWINFP01.sesvanderhave.net SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:16 2964 (0x0B94)
Failed to get object class SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:16 2964 (0x0B94)
ExecStaticMethod failed (80041002) SMS_DistributionPoint, RegisterDPHealthMonTask SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:16 2964 (0x0B94)
Failed to register DP health monitoring task on HUSOWINFP01.sesvanderhave.net. error = 0x80041002 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:16 2964 (0x0B94)
DP settings have been updated to HUSOWINFP01.sesvanderhave.net. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:21 2964 (0x0B94)
DPConnection::Disconnect: Revert to self SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:21 2964 (0x0B94)
Sleep 60 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:21 2964 (0x0B94)
Found notification for package 'SES00003' SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Found notification for package 'SES00004' SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Package Thread Limit: 3 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Retry interval: 30 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
DP upgrade thread Limit: 5 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
DP upgrade retry interval: 20 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Starting package processing thread, thread ID = 0x12CC (4812) SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Starting package processing thread, thread ID = 0xDD8 (3544) SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 2964 (0x0B94)
Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 2964 (0x0B94)
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=4812 GMTDATE=ma jan 06 07:50:32.429 2014 ISTR0="SES00003" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00003" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 4812 (0x12CC)
Retrying package SES00003 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 4812 (0x12CC)
No action specified for the package SES00003. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 4812 (0x12CC)
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=3544 GMTDATE=ma jan 06 07:50:32.475 2014 ISTR0="SES00004" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00004" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 3544 (0x0DD8)
Retrying package SES00004 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 3544 (0x0DD8)
No action specified for the package SES00004. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 3544 (0x0DD8)
Start adding package to server ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 4812 (0x12CC)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 8896 (0x22C0)
The distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ is not installed or upgraded yet. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 8896 (0x22C0)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 8896 (0x22C0)
Start adding package to server ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 3544 (0x0DD8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 4628 (0x1214)
The distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ is not installed or upgraded yet. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 4628 (0x1214)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 4628 (0x1214)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Thread Handle = 0000000000002BE0 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
DP thread with thread handle 0000000000002BE0 and thread ID 8896 ended. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Thread Handle = 0000000000002CF0 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
DP thread with thread handle 0000000000002CF0 and thread ID 4628 ended. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Package SES00004 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
The package and/or program properties for package SES00004 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=SES00004, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Package SES00003 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
The package and/or program properties for package SES00003 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=SES00003, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
StoredPkgVersion (1) of package SES00004. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
SourceVersion (1) of package SES00004. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=3544 GMTDATE=ma jan 06 07:50:35.736 2014 ISTR0="Configuration Manager Client Upgrade Package" ISTR1="SES00004" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00004" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Failed to process package SES00004 after 77 retries, will retry 23 more times SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
StoredPkgVersion (1) of package SES00003. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
SourceVersion (1) of package SES00003. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=4812 GMTDATE=ma jan 06 07:50:35.829 2014 ISTR0="Configuration Manager Client Package" ISTR1="SES00003" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00003" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Failed to process package SES00003 after 77 retries, will retry 23 more times SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:36 7492 (0x1D44)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:37 2964 (0x0B94)
Sleep 1828 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:37 2964 (0x0B94)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:41 7492 (0x1D44)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:42 2964 (0x0B94)
Sleep 1823 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:42 2964 (0x0B94)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:47 2964 (0x0B94)
Sleep 1818 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:47 2964 (0x0B94)
Sleep 1818 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:47 2964 (0x0B94)

Install of CUCM 8.6.1.10000-43 on VMWare fails on installing progmeter

Hi, Everyone
First time post here, and first time installing CUCM (any version).
I built a VM using a downloaded OVA template for CUCM 6.5.1.10000-43, and the install fails with a critical stop. Once I figured out how to dump logs to the virtual serial port, and looked at the install.log, I found the following information that looks like where the install failed (these are the only LVL::Error and LVL::Critical messages in the log).
It looks like install failed to install the progmeter application component.
Does anyone know what this app does? Any ideas on why it might have failed to install and possible workaround?
I may already have the answer to the question, as I'm attempting install on a VM running on VMWare vServer (rather than ESX/ESXi/vSphere). It is possible that simply being on an unsupported configuration is my problem. I'm trying to work with the equipment immediately available to me, but fully understand that I may have set myself up for failure by even attempting this.
Any help is appreciated greatly.
Regards,
Sean C
INSTALL LOG SNIPPET
08/17/2011 17:51:51 component_install|File:/opt/cisco/install/bin/component_install:743, Function: exec_progmeter(), /opt/cisco/install/bin/progmeter failed (1)|<LVL::Error>
08/17/2011 17:51:51 appmanager.sh|Internal Error, File:/usr/local/bin/base_scripts/appmanager.sh:155, Function: install(), failed to install application components|<LVL::Critical>
08/17/2011 17:51:51 post_install|File:/opt/cisco/install/bin/post_install:869, Function: install_applications(), /usr/local/bin/base_scripts/appmanager.sh -install failed (1)|<LVL::Error>
08/17/2011 17:51:51 post_install|Exiting with result 1|<LVL::Info>
08/17/2011 17:51:51 post_install|INSTALL_TYPE="Basic Install"|<LVL::Debug>
08/17/2011 17:51:51 post_install|File:/opt/cisco/install/bin/post_install:570, Function: check_for_critical_error(), check_for_critical_error, found /common/log/install/critical.log, exiting|<LVL::Error>
08/17/2011 17:51:52 post_install|(CAPTURE) Mail notification cancelled - smtp server address for email not found! [/usr/local/platform/conf/platformConfig.xml]|<LVL::Debug>
08/17/2011 17:51:52 display_screen|Arguments: "Critical Error" "The installation has encountered a unrecoverable internal error. For further assistance report the following information to your support provider.
"/opt/cisco/install/callmanager/scripts/cm_msa_post.sh install PostInstall 8.6.1.10000-43 8.6.1.10000-43 /usr/local/cm/ /usr/local/cm/ /common/log/install/capture.txt " terminated. Exceeded max time (360)
The system will now halt.
Continuing will allow you to dump diagnostic information before halting." "Continue"|<LVL::Debug>

Hi,
Has anyone found a fix for this?
I am trying to run call manager 8.6.1 on the following enviroment
VMware ESXI 4.1
4GB of RAM
80 GB HDD Space
I have allocated the VM one CPU
In regards to vsergeyey reponse I have checked the network adapter and this is flexible.
I have run the OVA template firstly before mounting the image
I have tried installing numerous times.
Each and every time near the "Installing Database Component" I get the following error;

Solaris 10 fails to install

Similar Messages

Maybe you are looking for