Solaris 10 .flar image - ready-to-use?

Hello, All!
I'm looking for Solaris 10 (freferrably 10/08) .flar image for installation into zone (as described here: http://www.sun.com/bigadmin/content/submitted/branded_zones_flash.jsp), just the same as it does exist for Solaris 8 and 9 (here: http://www.sun.com/software/solaris/containers/getit.jsp)
And yes, I do know how to create flar image of existing system - http://docs.sun.com/app/docs/doc/820-5241/flash-53?l=en&a=view -- I'm just interested in "clean", not so used Solaris 10 system.
Thanks,
Olga.

Hi Sid,I have tried the installation using same link.I was successful in creating the zone configuration but unable to install the zone using flarimage
bash-3.00# zoneadm -z GNM086 install -p -a /flairimage/gnm086
ERROR: The Solaris 10 Containers right-to-use package has not been installed
rm: Unable to remove directory /zones/gnm086: Device busy
zoneadm: zone 'GNM086': '/usr/bin/rm -rf' failed with exit code 2.
zoneadm: could not remove new zonepath: Empty document
bash-3.00#
Plz update me ,what can be done in this case.........
Thanks in Advance........

Similar Messages

Can i install flar image of solaris 10 from V890 to v480?

Team,
Please help me for a confusion that can i install flar image of solaris 10 from V890 to v480?
We have very good flar image of solaris 10 and want to install same on other machine.
this machine hosting the Oracle database on it.
Thanks
Ravi

Generally speaking, as long as you are in the same processor family (4u, 4m, 4c, 4v etc) you can do so.
The caveat is that the OS has to support the particular model you are on. No worries with S10 though.

Jumpstart installation of flar image fails

Guru's,
During night time I make a flar image of the local disk of a SF480. I also created a jumstart server (Solaris 10 03/05) so I would be able to restore this image on the 480. So far not very special, I think. Now comes the difficult part: the flar image of the 480 is an image of a mirrored disk (svm). For Solaris 9 I used a postinstall script to fix the svm files like mddb.tab, vfstab etc. to mount the original slices. After the installation of a Solaris 9 image everything was ok. When I try to do the same trick on Solaris 10 the whole procedure goes fine until the boot process reports:
Hostname: rusland
ERROR: svc:/system/filesystem/root:default failed to mount /usr (see 'svcs -x'
for details)
[ system/filesystem/root:default failed fatally (see 'svcs -x' for details) ]
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
Root password for system maintenance (control-d to bypass):
I did check the slice with fsck from a cdrom but there were no errors.
Even when I try to boot with ok> boot -m milestone=none the console services don't start. Does anybody have an idea what the problem is? I think I'm pretty close but I'm probably missing a (hopefully small) part. Thanks in advance.

Guru's,
During night time I make a flar image of the local disk of a SF480. I also created a jumstart server (Solaris 10 03/05) so I would be able to restore this image on the 480. So far not very special, I think. Now comes the difficult part: the flar image of the 480 is an image of a mirrored disk (svm). For Solaris 9 I used a postinstall script to fix the svm files like mddb.tab, vfstab etc. to mount the original slices. After the installation of a Solaris 9 image everything was ok. When I try to do the same trick on Solaris 10 the whole procedure goes fine until the boot process reports:
Hostname: rusland
ERROR: svc:/system/filesystem/root:default failed to mount /usr (see 'svcs -x'
for details)
[ system/filesystem/root:default failed fatally (see 'svcs -x' for details) ]
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
Root password for system maintenance (control-d to bypass):
I did check the slice with fsck from a cdrom but there were no errors.
Even when I try to boot with ok> boot -m milestone=none the console services don't start. Does anybody have an idea what the problem is? I think I'm pretty close but I'm probably missing a (hopefully small) part. Thanks in advance.

How Do I Change an Animated Gif's Iteration and Loop Settings? (Pshop/Image Ready 7.0)

Background to Issue (NOT a PPT or Windows issue even though It will seem like that at first but read on...): I have to make Animated GIFS to be inserted into Powerpoint. I work on a Mac but the PPT presentation will be shown on PCs (non-negotiable, since I can't ask hundreds of sales reps who will be using this to install an outdated version of PPT). I already learned that I need to insert the Gifs while working on a PC or else it won't work). Fair enough- I can put it together on a PC, again not the issue. BUT, when I do THAT, the gifs still wn't animate unless I am in PPT 2002. Fair enough (Microsif going backwards not a surprise) So it won't work in PPT 2003 which is what the users will all have. But I need to get the presentation to them asap! I got a bit further in researching and found out that the solution is that I need to set my "Loop Flag" and "Iteration Settings" appropriately. See this link (http://www.soniacoleman.com/Tutorials/PowerPoint/animated_gifs/gifs.htm)
BUT I am trying to find out if one can do this already somehow in Mac Photoshop 7.0 or Mac Image Ready 7.0, where I made the gif and would prefer to keep making my gifs. Maybe I need to upgrade Image Ready or Pshop to CS? SO THE FINAL QUESTION IS: Is there another way to manual do this without this PC Plug-in?
NOTE: Yes, I know how how to set the loop to "once" or "forever" in Image Ready when I make my Gifs but apparently I need to do this somewhere else...where the iteration setting lives too?

There is an ImageAnimator so you may not need to use byte array instead.
ImageAnimator.Animate Method
http://msdn.microsoft.com/en-us/library/system.drawing.imageanimator.animate(v=vs.110).aspx
chanmm
chanmm

Hi All image ready issue on an old photoshop 7 program

I am using photoshop 7 I know its an oldie but it works for me,whenever I try to jump to image ready I get the message could not fully start the application because an unknown error has ocurred,
I have been using the programs for some consideral time and never had any problems, until now. I have all the original discs packaging and key codes..... I have uninstalled and re installed I have plenty of memory but IR just wont open, Im sure this happened after an adobe update I cannot understand why if photoshop 7 continues to work fine and which is compatable with IR7 and came with the package just wont fire up. any ideas?

This forum deals with Adobe Digital Editions, not Photoshop....
===========

Slicing an image to be used in Dreamweaver html

It's been a long time since I used slicing images in Photoshop. It doesn't appear that Image Ready is there anymore. I use Photoshop CS3. I want to create a nav bar for an html email that will render correctly in Outlook 2007. It has been suggested that a sliced image could accomplish that. Is there a straightforward document that could walk me through the steps to accomplish this? Using the Photoshop "help" confuses the heck out of me.
The web version of the html email is: http://www.theshimogaproject.com/email/riverrun-guests-email.html

I'm honestly not sure what you are trying to do. The page as such could be perfectly taken and sent "as is". It doesn't seem to contain any of the usual problematic items that make MS' HTML rendering engine go whacko. In addition, it is so simple, you could convert a screenshot to a GIF and it would stil look okay. That aside, simply look up the knife tool and Save for Web and Devices in the help files when dealing with web content.
Mylenium

Help- how do I make images ready for web gallery??

Hi,
I am trying to create a photo gallery of images within Bridge using the Adobe Web Gallery feature. I have the images I want to use in a folder.What steps do I need to take to get the images saved in the correct format and file size? Also, what files sizes do you recommend for a web gallery? I need to make medium to large thumbnails & large images (when clicked). Here's what I am thinking I need in terms of getting this right:
use Adobe Photoshop/Bridge to create the gallery
jpg for photos
gif for solid colors
file size under 2MB (full image), under 20-30K for (thumbnails), total size of all images under 50K (no more than 50 sec. to download)
screen size: 984x728
screen resolution: 72dpi
If you could help me in any way, shape or form concerning making my images ready for a web gallery that would be most helpful. And if you can refer me to any resources on making a web gallery that'd be awesome. Thank you!
ashmic19

Thanks for the link Curt Y that video is really helpful. After looking through some materials I had I figured out how to optimize my images. So I don't need any help anymore. But thanks to all who viewed this and thanks Curt Y for the video!
ashmic19

Getting photoshop cs4 to work like image ready cs2 did for web - help :)

maybe one day i'll be able to come on here and give someone some help
ok im pretty new to using cs4 photoshop and i was quite comfortable in using cs2 with the swith over to image ready when doing slices and rollovers etc,
i have seen various people saying that image ready is no longer, i was just wondering if someone could give me a dummies guide to doing the same tricks on cs4
im looking to make slices, i can see the slices tool but i cant see how you go about doing rollovers and what not for links, im a beginner in doing web sites so im not into the coding yet
what i would normally have done in cs2 is -
do my web page layouts, everything except content,
do my links and rollovers on every page of my site then transfer over to dreamweaver, adding all my website content and linking the pages together
can anyone please help
thank you so much in advance
P

I don't do it that way but this might "Help"

Why did adobe vanish the Adobe Image ready from their package?

There used to be a a software called Adobe Image ready in the Adobe suite. it really made small animation and web animation very easy with the facility of main frame and time line . But I am a bit confused why did adobe remove it from the new suites? What should I use instead?
Regards,
Shirlee Ellingson

I just use Photoshop's animated gif capability?
Window>Timeline
Photoshop Help | Creating frame animations

Help with image ready on ps3 extended

I am pretty new to photo shop and have cs3 extended.
I have a Yorkie website where I cut out my Yorkies and paste them to differnet backgrounds.... a lady that does the ANIMATED pictures HAS DID A COUPLE FOR ME ....BUT I NEED TO LEARN TO DO THIS MYSELF. She will not tell folks how to do:)
The problem is once you work with a pic that is animated already then try to add a dog.....by pasting....it removes the animation in the background pic.... and the picture no longer moves once the dog is added ?....She said she puts thru IMAGE READY...which I do not see anywhere on CS3 extended. I will try to insert a pic she did for me and any help would be greatly appreciated....as I can do but then the picture is no longer animated once altered in my photoshop but she is doing somehow.....so has to be poss ? If I were to do this pic it would stop moving once the dogs were added....plus not as good as her but practicing........could it be the fact she is doing in layers and I am doing copy and paste...I do know she puts thru Image ready and I do not know where this is located on cs3 extended or how to do?
am

well...........l when I try to open Gif with the import and chose the video frames to layers...am getting a message saying I need Quicktime 7.1 to be able to do??? and when selecting import that is the only option I have to open my animated picture?...YOU HAVE BEEN SO MUCH HELP! THANK YOU SO MUCH...!
BLUE MONDAY EXCLUSIVES
Date: Sat, 17 Apr 2010 20:23:27 -0600
From: [email protected]
To: [email protected]
Subject: Re: Help with image ready on ps3 extended
I'm not sure anyone mentioned this but if not to open GIFs using the import you have to enter the GIF name as GIF isn't listed as one of the options.
It sounds like you are viewing the images in a maximized screen mode. To view more than one document, press F to cycle through the screen modes. FYI, only the contents of the currently selected document can be viewed in the layers palette.
I'll just talk about copy/paste so as not to confuse...
If you are going to copy/paste, click the frame around the dog document to target it. Your layers palette will now contain the contents of the dog document. Click on the layer in the layers palette with the selected dog over transparency. With that layer highlighted in your layers palette, press Ctrl A; then Ctrl C. (Select<Select All; Edit<copy if you prefer using the menu.) This will copy that layer into your clipboard.
Next, click the frame of the document containing the animation. Click the topmost layer in the layers palette because we want you dog to be in the top layer. Press Ctrl + V. (Edit<Paste if you prefer using the menu).
Your dog is most likely going to be too big. Use Edit<Free Transform to size and move the dog to the desired location.
At this point, your dog should be showing in each frame in the animation palette.
Example:
http://forums.adobe.com/servlet/JiveServlet/downloadImage/25315/with-palettes-open.jpg
I'm using the older Image Ready me method. The highlighted place in the palette is where you switch methods between the old method and the new timeline. Notice, I have the layers and animation palette both in the workspace...and I'm not in a maximized mode. The red arrow shows the correlation between the frame and the layer represented by it in the layers palette.
Image:second-image.jpg
Here I have a second image to slip into my animation. I have the creature selected and on it's own layer with transparency around it. Notice that the the layer with the isolated creature is highlighted. At this stage, I'll press Ctrl + A; then Ctrl + C to select and save this image to my clipboard.
Image:creature-added.jpg
Here, I've pasted (Ctrl + V or Edit<Paste) in my creature and resized it (Ctrl + T or Edit<free transform) so he can be jumped. I also added a shadow under my creature which I added to a layer under my creature. Notice that when Frame on is selected in the animation palette that the eye is on both the creature and the shadow. If I click the eye to turn them (creature and shadow layer) off, they disappear from the entire animation. I can make them appear at any frame by clicking the desired frame in the animation then turning on the eye icon for the creature and shadow layer in the layers palette. I can also adjust opacity if desired.
You could even more than the one image if you want the dog to appear to move. Use the eyeball visibility to determine which pose will be used for that frame.
Example:
Image:jump-creature-gif.gif
Here, I used transform warp to adjust the pose of the creature for a few frames as he's jumping the creature...just for fun.
>

Slicing an image to be used as a nav bar for html email

The html email that I've created renders as designed in most email clients. It doesn't in Outlook 2007. It was suggested that I slice an image for the nav bar so it displays horizontally as designed instead of vertically.
It's been a long time since I used slicing images in Photoshop. It doesn't appear that Image Ready is there anymore. I use Photoshop CS3. Is there a straightforward document that could walk me through the steps to accomplish this? Using the Photoshop "help" confuses the heck out of me and when I asked this question in the Photoshop forum, many looked at it but I've had no responses. Or could it be done in Dreamweaver somehow?
The web version of the html email is: http://www.theshimogaproject.com/email/riverrun-guests-email.html

You can't use DW to slice an image. Do you have Fireworks? It's really easy to do it in Fireworks, that's what I would use. If you need to use PhotoShop, a quick Google search, "slicing images in photoshop," return plenty of tutorials that you can choose from.

Rollover / slices workflow.. how do you do it sans Image Ready?

My old workflow use image ready to export rollovers, etc.
If I look at a typical nav menu (for my design), I have an area that needs several different types of slices.
1 slice involves the background, with the buttons turned off
2 slice involves the buttons in their off state
3 slice involves the buttons in their on state
It seems I would need to use 3 layers of slices to accomplish this.
My current workflow sucks - I
-slice the background , export
-slice the off state, export
-toggle to my on state, then export (uses the same name as off state) but put it in a /rollover folder.
It is a lot more work that I would like, and a pain if I have to go back and change the background... recreating the slice destroys my button slices.
I am curious to hear about your workflow for this.
Best,
KCr

> The help in Dreamweaver says you can swap out multiple
images with the
> same
> rollover behavior but fails to instruct me how (as far
as I can see)
That's how you do it. Select the trigger (text or image) and
apply a swap
image behavior. In the behavior pane that opens, select the
image you want
to swap out, and browse to and select the one you want to
replace it. To
swap another image, repeat that process, until you run out of
images. Then
click OK to close the behavior pane.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"thomasbricker" <[email protected]> wrote in
message
news:f43dub$6tu$[email protected]..
> So Im trying to create a remote rollover in an html
page.
> I knew how to do it in Image Ready and GoLive.
> Now that Im using Dreamweaver and Photoshop CS3, I now
dont know.
> Do you have to use Fireworks? (I would assume there is a
built in way to
> assign remote rollover behaviors in FW)
>
> The help in Dreamweaver says you can swap out multiple
images with the
> same
> rollover behavior but fails to instruct me how (as far
as I can see)
>

Setting Resolution in Image Ready

Is there a way to change the resolution in image ready when you use "save optimized"? I have an image in Photoshop that is 96 dpi and I want to keep that resolution, but it's automatically changing it to 72 dpi. I have CS2.
Thank you in advance!

As the other posts suggest, just focus on width x height measured in pixels.
Image resolution is irrelevant for web images.

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

Animated .gif file correction and image ready help.

Hi,
I have an animated gif created in an early verison of Image Ready & Photoshop. I need to make some changes. I have two problems.
A: Can't figure how to do it in the current version of Photoshop.
B: Open in the old image ready version, can't find the Layers pallet. I turn it on and off and it doesn't appear.
Trying to recreate a rotating .gif file any pointers or how to's?
Thanks,
John

You didn't say which version of ImageReady, but cs5 should open
most animated gifs from ImageReady and show the frames in the
Window>Animation panel. Some may not work right depending on
how old the version of ImageReady was that created them.
(you may have to resave the animation in ImageReady as a psd file)
In ImageReady try Window>Workspace>Reset Palette Locations and the layers
palette should be visible.
In ImageReady, in the actions palette, are several actions to rotate (spin) images.
MTSTUNER

Solaris 10 .flar image - ready-to-use?

Similar Messages

Maybe you are looking for