Solaris 10 hanging at Configuring Devices during installation

Hi All,
I am trying to install Solaris 10 via cd or net, but it hangs at Configuring Devices. This is an upgrade to the current Solaris 8 OS that is running on this system.
Does anyone have any insight to this problem?
Thanks in advance,
Brian

Having the same problem here. Hangs at "Configuring devices" right after the SunOS license message. Didn't have any luck with "pci-reprog=off", so I still can't get past this point, but this could be because of my specific hardware. Did manage to figure out the GRUB kernel boot argument syntax though, from this article:
GRUB and the Solaris 10 1/06 OS: The New Bootloader for x86 Platforms
http://www.sun.com/bigadmin/features/articles/grub_boot_solaris.html
"Properties other than boot-file can be specified on the GRUB kernel command line with this syntax:"kernel /platform/i86pc/multiboot -B prop1=val1[,prop2=val2...]Notice that commas are used between arguments. When I used spaces, only the first argument was understood. Found more info on booting from GRUB here:
x86: To Install or Upgrade With the Solaris Installation Program With GRUB
http://docs.sun.com/app/docs/doc/817-0544/6mgbagb1e?a=view
x86: GRUB Menu Commands for Installation
http://docs.sun.com/app/docs/doc/817-5504/6mkv4nh5e?a=view
I tried turning off dma for my cd & drives, and also tried turning off acpi, but nothing worked. Maybe somebody else here can make progress with this info though.
- Brett

Similar Messages

  • Installation hangs at "Configuring devices."

    Solaris 10 6/06 Installation hangs at "Configuring devices." stage.
    I have tried to:
    1) boot with "pci-reprog=off"
    2) disabled Core Duo in BIOS
    and with combinations of these.
    But nothings helps.
    My system:
    Intel Core Duo 6400 @2.13GHz,
    Western Digital WD2500-KS,
    NVIDIA GeForce 6200.
    Does anyone know workaround for this issue?

    i have exactly the same problem.
    a blank screen after configuring devices.
    this is just too different from:
    "solaris 10, the most advanced OS"
    aris
    acer aspire 5102wlmi

  • Fresh install of solaris 10 x86 hangs after 'Configuring devices'

    Hi All,
    I just received a new SuperMicro server with an LSI MegaRAID SAS 9261-8i controller. While trying to install Solaris 10 it hangs after "Configuring devices". I checked the LSI page and Solaris 10 is supported according to them. Any ideas how to proceed?
    Fairly new to Solaris on x86 hardware.
    The system has a Xeon X5690 processor in an Intel Workstation Board S5520SC motherboard. The motherboard documents claim that not disabling usb 2.0 can hang an install. I have disabled the usb 2.0 in the bios but the system still hangs. Booting it with the -kd and -kv options don't give much information.
    Any help is appreciated. I might be returning these machines if I can't get this worked out.
    Cheers,
    Steve
    Edited by: 967729 on Oct 25, 2012 3:51 PM

    See if you can add the verbose option "-v" to the kernel boot options. I think you can get to the GRUB menu off the Solaris 10 install disk. That should tell you what device is causing the hang, or at least the last device that worked.
    Also, can you try Solaris 11 and see if it gets past that point? A few years ago I has a similar issue with Solaris 10 on a Dell server. Solaris 11/OpenSolaris worked fine, though. IIRC I could work around the issue if I disabled the 2nd CPU - Solaris 10 had a problem bringing up the 2nd CPU on that Dell's CPU/MB config.

  • Live Upgrade hangs at Configuring devices. on Sun V440

    Hi all,
    I am trying to upgrade a V440 which is running Solaris 8 2/04 to Solaris 10 8/07.
    I have patched the V440 Solaris 8 build to the latest recommended patch cluster, and have also installed p7zip utility and followed the recommended patching procedures in Sun Doc 206844.
    I have installed the Live Upgrade packages from the Solaris Media Kit (8/07) and successfully created the Solaris 10 Boot Environment based on the Solaris 8 boot environment, upgraded it and activated it.
    However, on rebooting, the new Solaris10 boot environment hangs at configuring devices. and fails to proceed any further in the boot process.
    Can anyone assist please?

    Done it!
    It seems the only way I could get the V440 to upgrade to Solaris 10 was to upgrade the alternate boot environment to Solaris 9 (which required a reinstallation of the SAN foundation kit - which might be where Solaris 10 was hanging), and then a further upgrade of the alternate boot environment to Solaris 10.
    I might try uninstalling the SAN foundation kit, and then an upgrade from Solaris 8 to Solaris 10 and see if this confirms my theory. Will keep you posted.

  • No Dump Device Configured error during installation of Sloaris 8

    After installaing Soalris 8 on sn E250. It reboots and gives the above error message. Any ideas on what the problem might be and a solution to overcome it?
    TIA
    QT

    you need a swap partition on this machine.

  • System hang during installation of Solaris 10

    Dear all,
    Solaris 10 x86 6/06 installation on Magic-Pro MP-P6PE-1000
    mainboard.
    I have tried on PC and VMware 5.5.1, but fail the installation.
    Moreover, I have tried append "-kd" at "kernal ...cdrom" in GRUB edit mode, and then boot the system.
    type "use_mp/W 0 :c"
    But it still hang at:
    SunOS Release 5.10 Version Generic_118855-14 32-bit
    Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
    Use is subject to license terms.
    or
    configuring devices
    hang!!
    I've also try disable/enable ACPI, but no success.
    Have any ideas?
    Thanks!

    Try to boot the kernel with the "-v" option, any maybe even set
    "moddebug to 80000000", so that we can get a better idea
    where it is hanging.
    Check the following web page for details:
    http://blogs.sun.com/roller/page/dmick?entry=diagnosing_kernel_hangs_panics_with

  • SAP ECC6.0 SR3 on Oracl 10 g solaris 10 hangs during installation!!!

    Hi,
    I am installting SAP  ECC 6.0 SR3 with DB oracle 10g OS solaris 10 jdk version java version "1.4.2_16"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)
    Java HotSpot(TM) Client VM (build 1.4.2_16-b05, mixed mode)
    H/W : T6320 Blade server
    Memory : 16GB
    during installation at Import ABAP phase while importing last package SAPSSEXC it hung on me there were no error logs as such nor the FS was full...
    it resumed after couple of hrs..
    but hung again at IMport Java Dump phase
    and again no error logs...
    so, my concern here is that is there any bug in SR3 or i am not able to find the error logs
    the logs i check are:
    import_monitor.java.log:
    tail -100f import_monitor.java.log
    java version "1.4.2_16"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)
    Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_16-b05, mixed mode)
    Import Monitor jobs: running 1, waiting 1, completed 26, failed 0, total 28.
    Loading of 'SAPSSEXC' import package: OK
    Import Monitor jobs: running 0, waiting 1, completed 27, failed 0, total 28.
    Import Monitor jobs: running 1, waiting 0, completed 27, failed 0, total 28.
    Loading of 'SAPVIEW' import package: OK
    Import Monitor jobs: running 0, waiting 0, completed 28, failed 0, total 28.
    jload.java.log>>while import java dump phase:
    tail -100f jload.java.log
    INFO: trying to create table CAF_RT_NUMRNG
    Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
    INFO: table CAF_RT_NUMRNG created
    Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
    INFO: CAF_RT_NUMRNG loaded (0 rows)
    Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_RT_PERM_REL
    Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
    INFO: table CAF_RT_PERM_REL created
    Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
    INFO: CAF_RT_PERM_REL loaded (0 rows)
    Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_RT_PK_GEN
    Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
    INFO: table CAF_RT_PK_GEN created
    Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
    INFO: CAF_RT_PK_GEN loaded (0 rows)
    Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_RT_SRVMODULE
    Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
    INFO: table CAF_RT_SRVMODULE created
    Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
    INFO: CAF_RT_SRVMODULE loaded (0 rows)
    Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_RT_SVCCFG
    Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
    INFO: table CAF_RT_SVCCFG created
    Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
    INFO: CAF_RT_SVCCFG loaded (0 rows)
    Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_RT_SVCDEF
    Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
    INFO: table CAF_RT_SVCDEF created
    Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
    INFO: CAF_RT_SVCDEF loaded (0 rows)
    Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_RT_SVCLCK
    Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
    INFO: table CAF_RT_SVCLCK created
    Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
    INFO: CAF_RT_SVCLCK loaded (0 rows)
    Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_RT_SYSCFG
    Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
    INFO: table CAF_RT_SYSCFG created
    Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
    INFO: CAF_RT_SYSCFG loaded (0 rows)
    Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_RT_TREX_ATTR
    Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
    INFO: table CAF_RT_TREX_ATTR created
    Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
    INFO: CAF_RT_TREX_ATTR loaded (0 rows)
    Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_RT_TREX_FAILED
    Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
    INFO: table CAF_RT_TREX_FAILED created
    Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
    INFO: CAF_RT_TREX_FAILED loaded (0 rows)
    Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_RT_TREX_IDX
    Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
    INFO: table CAF_RT_TREX_IDX created
    Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
    INFO: CAF_RT_TREX_IDX loaded (0 rows)
    Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_RT_TREX_LINKS
    Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
    INFO: table CAF_RT_TREX_LINKS created
    Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
    INFO: CAF_RT_TREX_LINKS loaded (0 rows)
    Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_RT_TYPCEL
    Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
    INFO: table CAF_RT_TYPCEL created
    Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
    INFO: CAF_RT_TYPCEL loaded (0 rows)
    Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_RT_TYPCOT
    Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
    INFO: table CAF_RT_TYPCOT created
    Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
    INFO: CAF_RT_TYPCOT loaded (0 rows)
    Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_RT_TYPELE
    Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
    INFO: table CAF_RT_TYPELE created
    Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
    INFO: CAF_RT_TYPELE loaded (0 rows)
    Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_RT_TYPMES
    Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
    INFO: table CAF_RT_TYPMES created
    Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
    INFO: CAF_RT_TYPMES loaded (0 rows)
    Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_RT_TYPMMP
    Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
    INFO: table CAF_RT_TYPMMP created
    Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
    jload.log>>while import java dump phase :
    tail -100f jload.log
    12.09.08 12:48:18 com.sap.inst.jload.Jload dbImport
    INFO: CAF_UM_RELGR_MEMBS loaded (0 rows)
    12.09.08 12:48:18 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_UM_RELGR_TEXTS
    12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
    INFO: table CAF_UM_RELGR_TEXTS created
    12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
    INFO: CAF_UM_RELGR_TEXTS loaded (0 rows)
    12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table CAF_UM_RELGR_WORDS
    12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
    INFO: table CAF_UM_RELGR_WORDS created
    12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
    INFO: CAF_UM_RELGR_WORDS loaded (0 rows)
    12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table J2EE_CONFIG
    12.09.08 12:48:21 com.sap.inst.jload.Jload dbImport
    INFO: table J2EE_CONFIG created
    12.09.08 12:48:49 com.sap.inst.jload.Jload dbImport
    INFO: J2EE_CONFIG loaded (9195 rows)
    12.09.08 12:48:49 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table J2EE_CONFIGENTRY
    12.09.08 12:48:50 com.sap.inst.jload.Jload dbImport
    INFO: table J2EE_CONFIGENTRY created
    12.09.08 13:44:02 com.sap.inst.jload.Jload dbImport
    INFO: J2EE_CONFIGENTRY loaded (20235 rows)
    12.09.08 13:44:02 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table J2EE_KEYSEQUENCE
    12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
    INFO: table J2EE_KEYSEQUENCE created
    12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
    INFO: J2EE_KEYSEQUENCE loaded (1 rows)
    12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table SP_PLUG_IN_SAVES
    12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
    INFO: table SP_PLUG_IN_SAVES created
    12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
    INFO: SP_PLUG_IN_SAVES loaded (0 rows)
    12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table SP_RESULTS
    12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
    INFO: table SP_RESULTS created
    12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
    INFO: SP_RESULTS loaded (0 rows)
    12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table SP_STORAGE
    12.09.08 13:44:05 com.sap.inst.jload.Jload dbImport
    INFO: table SP_STORAGE created
    12.09.08 13:44:06 com.sap.inst.jload.Jload dbImport
    INFO: SP_STORAGE loaded (2 rows)
    12.09.08 13:44:06 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table TC_WDRR_FGUID
    12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
    INFO: table TC_WDRR_FGUID created
    12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
    INFO: TC_WDRR_FGUID loaded (0 rows)
    12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table TC_WDRR_LAYERS
    12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
    INFO: table TC_WDRR_LAYERS created
    12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
    INFO: TC_WDRR_LAYERS loaded (2 rows)
    12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table TC_WDRR_MRO_FILES
    12.09.08 13:44:09 com.sap.inst.jload.Jload dbImport
    INFO: table TC_WDRR_MRO_FILES created
    PLEASE HELP ASAP!!!!!!
    Regards,
    Sohal....

    Hi Ashok,
    Thanks for prompt response
    Yes Oracle is up....it bounced the Db once before performing Post Load activities...step
    now, it resumed the installation and currently updating the DB statistics.
    please chk the logs below:
    tail -200f sapinst.log:
    INFO 2008-09-12 14:12:05.250
    Execution of the command "/oracle/RGP/102_64/bin/lsnrctl status LISTENER" finished with return code 0. Output:
    LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 12-SEP-2008 14:12:05
    Copyright (c) 1991, 2005, Oracle.  All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=RGP.WORLD))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
    Start Date                11-SEP-2008 20:28:39
    Uptime                    0 days 17 hr. 43 min. 25 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   /oracle/RGP/102_64/network/admin/listener.ora
    Listener Log File         /oracle/RGP/102_64/network/log/listener.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=RGP.WORLD)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=RGP)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=FLGPPSAP01)(PORT=1527)))
    Services Summary...
    Service "RGP" has 1 instance(s).
      Instance "RGP", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    INFO 2008-09-12 14:12:13.667
    Execute step createOracleStatisticsSynonyms of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ORA|ind|ind|ind|ind|0|0
    INFO 2008-09-12 14:12:14.023
    Account orargp already exists.
    INFO 2008-09-12 14:12:14.033
    Account 0 already exists.
    INFO 2008-09-12 14:12:14.049
    Account dba already exists.
    INFO 2008-09-12 14:12:14.058
    Account 104 already exists.
    INFO 2008-09-12 14:12:14.078
    Account 0 already exists.
    INFO 2008-09-12 14:12:14.096
    Account 105 already exists.
    INFO 2008-09-12 14:12:15.836
    Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/brconnect.log.
    INFO 2008-09-12 14:12:15.972
    Output of /usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f crsyn -o SAPSR3 is written to the logfile brconnect.log.
    INFO 2008-09-12 14:12:18.817
    Execution of the command "/usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f crsyn -o SAPSR3" finished with return code 0. Output:
    BR0801I BRCONNECT 7.00 (32)
    BR0280I BRCONNECT time stamp: 2008-09-12 14.12.17
    BR0833I Creating public synonyms for database log owner SAPSR3...
    BR0925I Public synonym SAP_SDBAH created successfully for table SAPSR3.SDBAH
    BR0925I Public synonym SAP_SDBAD created successfully for table SAPSR3.SDBAD
    BR0925I Public synonym SAP_MLICHECK created successfully for table SAPSR3.MLICHECK
    BR0925I Public synonym SAP_SAPLIKEY created successfully for table SAPSR3.SAPLIKEY
    BR0925I Public synonym SAP_DBAML created successfully for table SAPSR3.DBAML
    BR0925I Public synonym SAP_DBARCL created successfully for table SAPSR3.DBARCL
    BR0925I Public synonym SAP_DBAFID created successfully for table SAPSR3.DBAFID
    BR0925I Public synonym SAP_DBAEXTL created successfully for table SAPSR3.DBAEXTL
    BR0925I Public synonym SAP_DBAREOL created successfully for table SAPSR3.DBAREOL
    BR0925I Public synonym SAP_DBABARL created successfully for table SAPSR3.DBABARL
    BR0925I Public synonym SAP_DBADFL created successfully for table SAPSR3.DBADFL
    BR0925I Public synonym SAP_DBAOPTL created successfully for table SAPSR3.DBAOPTL
    BR0925I Public synonym SAP_DBASPAL created successfully for table SAPSR3.DBASPAL
    BR0925I Public synonym SAP_DBABD created successfully for table SAPSR3.DBABD
    BR0925I Public synonym SAP_DBABL created successfully for table SAPSR3.DBABL
    BR0925I Public synonym SAP_DBATL created successfully for table SAPSR3.DBATL
    BR0925I Public synonym SAP_DBAOBJL created successfully for table SAPSR3.DBAOBJL
    BR0925I Public synonym SAP_DBAPHAL created successfully for table SAPSR3.DBAPHAL
    BR0925I Public synonym SAP_DBAGRP created successfully for table SAPSR3.DBAGRP
    BR0925I Public synonym SAP_DBAERR created successfully for table SAPSR3.DBAERR
    BR0925I Public synonym SAP_DBATRIAL created successfully for table SAPSR3.DBATRIAL
    BR0925I Public synonym SAP_SVERS created successfully for table SAPSR3.SVERS
    BR0925I Public synonym SAP_TGORA created successfully for table SAPSR3.TGORA
    BR0925I Public synonym SAP_IGORA created successfully for table SAPSR3.IGORA
    BR0925I Public synonym SAP_TSORA created successfully for table SAPSR3.TSORA
    BR0925I Public synonym SAP_TAORA created successfully for table SAPSR3.TAORA
    BR0925I Public synonym SAP_IAORA created successfully for table SAPSR3.IAORA
    BR0925I Public synonym SAP_DD02L created successfully for table SAPSR3.DD02L
    BR0925I Public synonym SAP_DD09L created successfully for table SAPSR3.DD09L
    BR0925I Public synonym SAP_DDNTT created successfully for table SAPSR3.DDNTT
    BR0925I Public synonym SAP_DBCHK created successfully for table SAPSR3.DBCHK
    BR0925I Public synonym SAP_DBDIFF created successfully for table SAPSR3.DBDIFF
    BR0925I Public synonym SAP_DBSTATC created successfully for table SAPSR3.DBSTATC
    BR0925I Public synonym SAP_DBSTATTORA created successfully for table SAPSR3.DBSTATTORA
    BR0925I Public synonym SAP_DBSTATIORA created successfully for table SAPSR3.DBSTATIORA
    BR0925I Public synonym SAP_DBSTATHORA created successfully for table SAPSR3.DBSTATHORA
    BR0925I Public synonym SAP_DBSTAIHORA created successfully for table SAPSR3.DBSTAIHORA
    BR0925I Public synonym SAP_DBCHECKORA created successfully for table SAPSR3.DBCHECKORA
    BR0925I Public synonym SAP_DBMSGORA created successfully for table SAPSR3.DBMSGORA
    BR0280I BRCONNECT time stamp: 2008-09-12 14.12.18
    BR0834I Public synonyms for database log owner SAPSR3 created successfully
    BR0280I BRCONNECT time stamp: 2008-09-12 14.12.18
    BR0802I BRCONNECT completed successfully
    INFO 2008-09-12 14:12:23.841
    Execute step setOraclePasswords of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ORA|ind|ind|ind|ind|0|0
    INFO 2008-09-12 14:12:25.190
    Account orargp already exists.
    INFO 2008-09-12 14:12:25.194
    Account dba already exists.
    INFO 2008-09-12 14:12:25.198
    Account orargp already exists.
    INFO 2008-09-12 14:12:25.202
    Account dba already exists.
    INFO 2008-09-12 14:12:25.251
    Removing file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp0_1.sql.
    INFO 2008-09-12 14:12:25.260
    Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp0_1.sql.
    INFO 2008-09-12 14:12:28.279
    Account orargp already exists.
    INFO 2008-09-12 14:12:28.290
    Account 0 already exists.
    INFO 2008-09-12 14:12:28.305
    Account dba already exists.
    INFO 2008-09-12 14:12:28.315
    Account 104 already exists.
    INFO 2008-09-12 14:12:28.335
    Account 0 already exists.
    INFO 2008-09-12 14:12:28.353
    Account 105 already exists.
    INFO 2008-09-12 14:12:30.123
    Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/brconnect.log.
    INFO 2008-09-12 14:12:30.269
    Output of /usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f chpass -o SAPSR3 -p XXXXXX is written to the logfile brconnect.log.
    INFO 2008-09-12 14:12:31.006
    Execution of the command "/usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f chpass -o SAPSR3 -p XXXXXX" finished with return code 0. Output:
    BR0801I BRCONNECT 7.00 (32)
    BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
    BR0828I Changing password for database user SAPSR3
    BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
    BR0829I Password changed successfully in database for user SAPSR3
    BR0830I Password inserted successfully into table OPS$RGPADM.SAPUSER for user SAPSR3
    BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
    BR0802I BRCONNECT completed successfully
    INFO 2008-09-12 14:12:31.574
    Account orargp already exists.
    INFO 2008-09-12 14:12:31.578
    Account dba already exists.
    INFO 2008-09-12 14:12:31.583
    Account orargp already exists.
    INFO 2008-09-12 14:12:31.587
    Account dba already exists.
    INFO 2008-09-12 14:12:31.641
    Removing file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp1_1.sql.
    INFO 2008-09-12 14:12:31.649
    Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp1_1.sql.
    INFO 2008-09-12 14:12:33.918
    Account orargp already exists.
    INFO 2008-09-12 14:12:33.928
    Account 0 already exists.
    INFO 2008-09-12 14:12:33.944
    Account dba already exists.
    INFO 2008-09-12 14:12:33.953
    Account 104 already exists.
    INFO 2008-09-12 14:12:33.973
    Account 0 already exists.
    INFO 2008-09-12 14:12:33.991

  • JumpStartKit install hangs at 87% complete during database creation / instance configuration

    Hello folks, I'm wanting to evaluate Oracle WebCenter Portal 11.1.1.8 (huge improvement over 11.1.1.7, which I have already gave a quick try in the VDI provided by Oracle).
    So I found out about this Jump Start Kit, which installs each required piece once you've got a properly configured Linux environment. I had some fun with the prereqs but now that's all completed and I got SO EXCITED to make it past "STEP 4".
    So now I'm encountering the same issue during installation -- in STEP 6 of 22 Configuration of Database Instance (Completing Database Creation) it gets to 87% complete and then nothing seems to happen, it never gets beyond that point even if I wait 10 more hours:
    NOTE: I suspect my issue is not specific to the "Jump Start Kit", but rather it is something others have encountered during the Database creation/configuration step of the Oracle Universal Installer in general. And hopefully others have solved it.
    "/opt/oracle/portal" is my INSTALL_DIR ; I had launched the JSK installer with this command:
    ./runme INSTANCE_PASSWORD=apwd ROOT_PASSWORD=rpwd DOWNLOAD_DIR=/media/sf_Downloads/JSKfiles INSTALL_DIR=/opt/oracle/portal
    - The installer makes it this far, before it seems to get "stuck" -- even after many hours there is no change, HD is not doing anything, CPU stays at <5% usage:
    rtkit.main.JSKStarter - launchScript:172 - Tue Jun 10 15:41:38 MDT 2014: BEGIN STEP 6 of 22: Configuration of Database Instance. Estimated time is around 5 minutes. Please wait..
    10/06/2014 15:41:38.545 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 -
    10/06/2014 15:41:48.222 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Copying database files
    10/06/2014 15:41:48.413 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 1% complete
    10/06/2014 15:41:52.894 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 3% complete
    10/06/2014 15:41:52.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 11% complete
    10/06/2014 15:42:02.917 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 18% complete
    10/06/2014 15:42:32.920 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 26% complete
    10/06/2014 15:42:42.638 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 37% complete
    10/06/2014 15:42:42.640 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Creating and starting Oracle instance
    10/06/2014 15:42:48.568 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 40% complete
    10/06/2014 15:42:56.827 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 45% complete
    10/06/2014 15:42:57.357 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 46% complete
    10/06/2014 15:42:57.526 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 47% complete
    10/06/2014 15:42:57.627 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 48% complete
    10/06/2014 15:42:57.834 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 49% complete
    10/06/2014 15:44:42.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 54% complete
    10/06/2014 15:44:42.963 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 59% complete
    10/06/2014 15:44:43.036 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 60% complete
    10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 61% complete
    10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 64% complete
    10/06/2014 15:44:43.453 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Completing Database Creation
    10/06/2014 15:44:43.493 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 68% complete
    10/06/2014 15:44:43.510 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 72% complete
    10/06/2014 15:44:43.571 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 76% complete
    10/06/2014 15:45:01.516 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 87% complete
    I am using VirtualBox on Windows 7, I have tried it multiple times, first with the guest OS as Oracle Linux 6, and then Oracle Linux 5 (fun learning about updating the version of Java!).
    It always gets to the same point and then it just seems to do nothing -- no progress, but no error message on-screen (see log files below). But it seems to be using less than 5% CPU usage... and waiting 10 hours makes no difference.
    Based on what I found in tons of Google searching, I tried increasing my swap file, adding more memory and HD space (12GB RAM and 10GB sap and 20GB free hard drive space) but still nothing changed.
    In post #2 of this thread I will separately provide the logging details, which I hope will be helpful.
    Thanks in advance!
    Darren.
    PS: moderator, I attempted to create this thread in other Spaces because I did not know about this "Portal JSK" specific one -- was that why my thread was rejected? NO REASON WAS GIVEN. If that WAS the reason, I have to say that it will be nearly impossible for anyone who is able to help me to actually FIND this thread here because as I said I do not think it specific to ONLY the Portal JSK. (But I will post it only here just in case that's the reason for the previous rejections)

    First off, thank you very much for not just deleting the other 2 threads -- I intentionally created them in the other 2 spaces that MIGHT find a set of eyes that can help -- but in both I linked to THIS thread because this is the specific product. So this is the only place replies will be found therefore no "duplication" to worry about... but as I said this is likely not specific to PortalJSK since others on the internet have described a similar problem during the Oracle database installation.
    Second of all. here we go, the log contents...
    ...So in the hope that I could troubleshoot based on some error logging, I had a look inside "/opt/oracle/portal/db/OraInventory/logs/"...
    - "/opt/oracle/portal/db/OraInventory/logs/oraInstall2014-06-10_03-27-37PM.err" is empty (0 bytes),
    - "/opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-27-37PM.log" * (2.3MB) ends with...
    INFO: Terminating all background operations
    INFO: Terminated all background operations
    INFO: Successfully executed the flow in SILENT mode
    INFO: Finding the most appropriate exit status for the current application
    INFO: Exit Status is 0
    INFO: Shutdown Oracle Database 11g Release 2 Installer
    INFO: Unloading Setup Driver
    [eof]
    I am not sure of the value of the additional log files inside "/opt/oracle/run/logs/", here is what they contain...
    - all of the "/opt/oracle/run/logs/xyz_NofN.zip.unzip.out" files are empty (0 bytes).
    - "/opt/oracle/run/logs/install_commands.log" is tiny, it just has this:
    /media/sf_Downloads/JSKfiles/DB/database/runInstaller -invPtrLoc /opt/oracle/run/linux64/dborainst.loc  -ignoreSysPrereqs  -ignorePrereq -force -silent -waitforcompletion -responseFile /opt/oracle/run/linux64/db_generated.rsp
    /opt/oracle/portal/db/ohome/bin/netca /orahome /opt/oracle/portal/db/ohome /orahnam orcl /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /responseFile /opt/oracle/run/linux64/netca.rsp /silent
    /opt/oracle/portal/db/ohome/bin/dbca -silent -responseFile /opt/oracle/run/linux64/dbca.rsp  -sampleSchema true -oratabLocation ORATAB
    - "webtier_prereqs.log" and "ecm_prereqs.log" and "wcprereqs.log" all say that all tests passed.
    (Tests for HD and RAM space and swap size and # of processes etc. are all SUCCESS; and all required packages are installed and high enough version, etc.)
    - "/opt/oracle/run/logs/dbprereqs_log.txt" says this:
    Starting Oracle Universal Installer...
    Checking Temp space: must be greater than 120 MB.   Actual 8855 MB    Passed
    Checking swap space: must be greater than 150 MB.   Actual 4031 MB    Passed
    Preparing to launch Oracle Universal Installer from /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-26-23PM. Please wait ...[WARNING] [INS-13014] Target environment do not meet some optional requirements.
       CAUSE: Some of the optional prerequisites are not met. See logs for details. /opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-26-23PM.log
       ACTION: Identify the list of failed prerequisite checks from the log: /opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-26-23PM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually.
    - "/opt/oracle/run/logs/wls-install.log" is the most confusing, maybe this is the reason for getting "stuck"?
    2014-06-10 15:24:38,139 WARN  [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux32_jdk160_29b11.zip not found..
    2014-06-10 15:24:38,143 WARN  [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux_ia32_jrockit_160_29_D1.2.0-10_jdk.zip not found..
    2014-06-10 15:24:38,206 WARN  [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux32_jdk160_29b11.zip not found..
    2014-06-10 15:24:38,209 WARN  [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux_ia32_jrockit_160_29_D1.2.0-10_jdk.zip not found..
    2014-06-10 15:24:38,225 WARN  [home] com.bea.plateng.wizard.installer.silent.tasks.SilentBEAHomeTask - /opt/oracle/portal/fmw directory is not empty. Proceed with installation?
    2014-06-10 15:24:39,223 WARN  [ocmCredVerify] com.bea.plateng.wizard.installer.helpers.OCMInstallHelper - Failed test connection
    java.lang.reflect.InvocationTargetException
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at com.bea.plateng.wizard.installer.helpers.OCMInstallHelper.testConnection(OCMInstallHelper.java:92)
      at com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask.execute(OCMCredVerifySilentTask.java:35)
      at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
      at java.lang.Thread.run(Thread.java:662)
    Caused by: com.bea.plateng.wizard.installer.helpers.OCMException: Connection failed in SSL peer verificaition.
      at com.bea.plateng.wizard.installer.helpers.OCMHelper.testSimpleConnection(OCMHelper.java:54)
      at com.bea.plateng.wizard.installer.helpers.OCMHelper.testConnection(OCMHelper.java:145)
      ... 8 more
    2014-06-10 15:24:39,228 WARN  [ocmCredVerify] com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask - OCMInstallException:
    com.bea.plateng.wizard.installer.helpers.OCMInstallException
      at com.bea.plateng.wizard.installer.helpers.OCMInstallHelper.testConnection(OCMInstallHelper.java:96)
      at com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask.execute(OCMCredVerifySilentTask.java:35)
      at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
      at java.lang.Thread.run(Thread.java:662)
    2014-06-10 15:25:49,347 INFO  [Thread-13] com.oracle.cie.domain.TemplateImporter - Domain Extension Successful!
    2014-06-10 15:25:49,350 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - close template
    2014-06-10 15:25:49,351 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: close template
    2014-06-10 15:25:49,351 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - read domain from "/opt/oracle/portal/fmw/wlserver_10.3/samples/domains/medrec-spring"
    2014-06-10 15:25:49,405 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: read domain from "/opt/oracle/portal/fmw/wlserver_10.3/samples/domains/medrec-spring"
    2014-06-10 15:25:49,405 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: update domain
    2014-06-10 15:25:49,406 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - close template
    2014-06-10 15:25:49,406 INFO  [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: close template
    2014-06-10 15:25:49,743 INFO  [WizardController] com.bea.plateng.wizard.silent.tasks.LogTask - The installation was successfull!
    ^ ^ ^ BUT IT SEEMS TO END AS A "SUCCESS"!?
    - "install_setup.log" ends with the following -- and so does "JSKDownloader.log" (the "master log"? it contains basically what shows up on-screen)
    rtkit.main.JSKStarter - launchScript:172 - Tue Jun 10 15:41:38 MDT 2014: BEGIN STEP 6 of 22: Configuration of Database Instance. Estimated time is around 5 minutes. Please wait..
    10/06/2014 15:41:38.545 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 -
    10/06/2014 15:41:48.222 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Copying database files
    10/06/2014 15:41:48.413 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 1% complete
    10/06/2014 15:41:52.894 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 3% complete
    10/06/2014 15:41:52.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 11% complete
    10/06/2014 15:42:02.917 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 18% complete
    10/06/2014 15:42:32.920 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 26% complete
    10/06/2014 15:42:42.638 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 37% complete
    10/06/2014 15:42:42.640 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Creating and starting Oracle instance
    10/06/2014 15:42:48.568 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 40% complete
    10/06/2014 15:42:56.827 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 45% complete
    10/06/2014 15:42:57.357 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 46% complete
    10/06/2014 15:42:57.526 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 47% complete
    10/06/2014 15:42:57.627 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 48% complete
    10/06/2014 15:42:57.834 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 49% complete
    10/06/2014 15:44:42.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 54% complete
    10/06/2014 15:44:42.963 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 59% complete
    10/06/2014 15:44:43.036 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 60% complete
    10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 61% complete
    10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 64% complete
    10/06/2014 15:44:43.453 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Completing Database Creation
    10/06/2014 15:44:43.493 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 68% complete
    10/06/2014 15:44:43.510 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 72% complete
    10/06/2014 15:44:43.571 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 76% complete
    10/06/2014 15:45:01.516 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 87% complete
    * Here are the final 261 lines of "/opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-27-37PM.log"...
    INFO: Start output from spawned process:
    INFO: ----------------------------------
    INFO:
    INFO: SaveInvWCCE JRE files in Scratch
    INFO: oracle.installer.mandatorySetup property is set to false, so skipping the execution of additional tools
    INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
    INFO: Config Initialize JRE files in Scratch
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: Oracle Configuration Manager
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: HAS Common Files
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: Oracle Netca Client
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: Database Configuration and Upgrade Assistants
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: Oracle Enterprise Manager Console DB
    INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
    INFO: Copying Aggr XML for: Oracle Database 11g
    INFO: The Top level Aggreage File = /opt/oracle/portal/db/ohome/inventory/ContentsXML/ConfigXML/oracle.server.11_2_0_1_0.xml
    INFO: OUI_CAPlugIn is not found in XML
    INFO: no. of tools to supress: 0 for comp: Oracle Enterprise Manager Console DB
    INFO: cf session will be created for OH: /opt/oracle/portal/db/ohome/ TLAggr: oracle.server instancePath: inventory/ContentsXML/ConfigXML/
    INFO: cf session for OH: /opt/oracle/portal/db/ohome/ TL Aggr: [oracle.server] instancePath: inventory/ContentsXML/ConfigXML/
    INFO: aggr ref length : 6
    INFO: cf session hashcode: 620301082
    INFO: cf session saved with key: OraDb11g_home1 oracle.server
    INFO: cf session is ok
    INFO: created and saved cf session for oh: OraDb11g_home1
    INFO: passing params to cf
    INFO: Handling the storing of variables for aggr name  oracle.sysman.ccr
    INFO: This variable s_OPSNodeInfoString is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable b_createResponseFile is not added to the global context map
    INFO: This variable s_ps is not added to the global context map
    INFO: This variable s_oraName is not added to the global context map
    INFO: This variable s_ccrJarDestination is not added to the global context map
    INFO: This variable b_localInstall is not added to the global context map
    INFO: This variable b_doConfigCCR is not added to the global context map
    INFO: This variable b_ccrUpgrade is not added to the global context map
    INFO: This variable s_rspFilePath is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: for oracle.has.common no aggregate found by cf: no configuration
    INFO: Handling the storing of variables for aggr name  oracle.assistants.netca.client
    INFO: This variable s_swingallName is not added to the global context map
    INFO: This variable s_shareName is not added to the global context map
    INFO: This variable s_runtimeLib is not added to the global context map
    INFO: This variable s_runTimeJar is not added to the global context map
    INFO: This variable s_responseFileName is not added to the global context map
    INFO: This variable s_operatingSystem is not added to the global context map
    INFO: This variable s_netcfgName is not added to the global context map
    INFO: This variable s_netcahelpName is not added to the global context map
    INFO: This variable s_netcaUpgradeFlag is not added to the global context map
    INFO: This variable s_netcaClass is not added to the global context map
    INFO: This variable s_netCA_Args is not added to the global context map
    INFO: This variable s_netCAInstalledProtocols is not added to the global context map
    INFO: This variable s_netAPIName is not added to the global context map
    INFO: This variable s_ldapclnt9 is not added to the global context map
    INFO: This variable s_ldapclnt11 is not added to the global context map
    INFO: This variable s_ldapclnt10 is not added to the global context map
    INFO: This variable s_jreLocation is not added to the global context map
    INFO: This variable s_jreJarFile is not added to the global context map
    INFO: This variable s_jreJar is not added to the global context map
    INFO: This variable s_jewtName is not added to the global context map
    INFO: This variable s_installTypeForLaunchNETCA is not added to the global context map
    INFO: This variable s_icebrowserName is not added to the global context map
    INFO: This variable s_helpName is not added to the global context map
    INFO: This variable s_ewtcompatName is not added to the global context map
    INFO: This variable s_ewtName is not added to the global context map
    INFO: This variable s_ewtFile is not added to the global context map
    INFO: This variable s_ewtCompat is not added to the global context map
    INFO: This variable s_cfgMethod is not added to the global context map
    INFO: This variable s_caHelpZhTwJar is not added to the global context map
    INFO: This variable s_caHelpZhCnJar is not added to the global context map
    INFO: This variable s_caHelpPtBRJar is not added to the global context map
    INFO: This variable s_caHelpKoJar is not added to the global context map
    INFO: This variable s_caHelpJar is not added to the global context map
    INFO: This variable s_caHelpJaJar is not added to the global context map
    INFO: This variable s_caHelpItJar is not added to the global context map
    INFO: This variable s_caHelpFrJar is not added to the global context map
    INFO: This variable s_caHelpEsJar is not added to the global context map
    INFO: This variable s_caHelpDeJar is not added to the global context map
    INFO: This variable s_authAdaptors is not added to the global context map
    INFO: This variable ps_netCA_Args_OverRide is not added to the global context map
    INFO: This variable b_net8ServerInstalling is not added to the global context map
    INFO: This variable b_javavmIsInstalling is not added to the global context map
    INFO: This variable b_isWindows is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable b_cmanIsInstalling is not added to the global context map
    INFO: This variable b_anoIsInstalling is not added to the global context map
    INFO: This variable s_xmlparservLoc is not added to the global context map
    INFO: This variable s_ouiJlibDir is not added to the global context map
    INFO: This variable s_opsmJlib is not added to the global context map
    INFO: This variable s_ntwkTools is not added to the global context map
    INFO: This variable s_netjlibDir is not added to the global context map
    INFO: This variable s_netcahelpLocation is not added to the global context map
    INFO: This variable s_netcaJlibDir is not added to the global context map
    INFO: This variable s_netcaDocDir is not added to the global context map
    INFO: This variable s_netPropertiesFile is not added to the global context map
    INFO: This variable s_netCA is not added to the global context map
    INFO: This variable s_net8caFileToInstantiate is not added to the global context map
    INFO: This variable s_jre15Location is not added to the global context map
    INFO: This variable s_jlibDir is not added to the global context map
    INFO: This variable s_inventoryPrereqOui is not added to the global context map
    INFO: This variable s_emdwLibDir is not added to the global context map
    INFO: This variable s_caHelpDir is not added to the global context map
    INFO: This variable s_assistantJlibDir is not added to the global context map
    INFO: This variable s_JavaFlag is not added to the global context map
    INFO: This variable b_isOPS is not added to the global context map
    INFO: This variable s_windowsCommandLine is not added to the global context map
    INFO: This variable s_net8caExecutable is not added to the global context map
    INFO: This variable s_netcaUserDirArg is not added to the global context map
    INFO: This variable s_installTypeForNetCA is not added to the global context map
    INFO: This variable s_netcaSilentFlag is not added to the global context map
    INFO: This variable s_netCAInstalledProducts is not added to the global context map
    INFO: This variable s_netcaClasspath is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: ORACLE_HOME is not settable, hence not setting the value
    INFO: Handling the storing of variables for aggr name  oracle.assistants.server
    INFO: This variable s_operatingSystem is not added to the global context map
    INFO: This variable s_jreLocation is not added to the global context map
    INFO: This variable pn_dboffset is not added to the global context map
    INFO: This variable cs_swingName is not added to the global context map
    INFO: This variable cs_komodoName is not added to the global context map
    INFO: This variable cs_kodiakName is not added to the global context map
    INFO: This variable cs_jewtName is not added to the global context map
    INFO: This variable cs_iceBrowserName is not added to the global context map
    INFO: This variable cs_ewtcompatName is not added to the global context map
    INFO: This variable cs_ewtName is not added to the global context map
    INFO: This variable cs_baliShareName is not added to the global context map
    INFO: This variable b_orabaseContainsOrahome is not added to the global context map
    INFO: This variable b_isWINDOWS is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable sl_dbmaParameterListForIcon is not added to the global context map
    INFO: This variable sl_dbcaParameterListForIcon is not added to the global context map
    INFO: This variable s_xmlparservLoc is not added to the global context map
    INFO: This variable s_ouiJlibLocation is not added to the global context map
    INFO: This variable s_oratabLocation is not added to the global context map
    INFO: This variable s_opsmLocation is not added to the global context map
    INFO: This variable s_dbuaLocation is not added to the global context map
    INFO: This variable s_dbcaLocation is not added to the global context map
    INFO: This variable s_OracleBinLocation is not added to the global context map
    INFO: This variable s_dbcaInstLaunchFile is not added to the global context map
    INFO: This variable s_dbcaLaunchFile is not added to the global context map
    INFO: This variable s_dbmaLaunchFile is not added to the global context map
    INFO: This variable s_dbmaInstLaunchFile is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: ORACLE_HOME is not settable, hence not setting the value
    INFO: Handling the storing of variables for aggr name  oracle.sysman.console.db
    INFO: This variable s_sid is not added to the global context map
    INFO: This variable s_serverInstallType is not added to the global context map
    INFO: This variable s_platform is not added to the global context map
    INFO: HashMap added with the key oracle.sysman.console.db and an empty variable Vector
    INFO: Adding the variable s_obfOc4jAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_obfOc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_obfJtaAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_obfJtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: This variable s_nlsLang is not added to the global context map
    INFO: This variable s_emailServer is not added to the global context map
    INFO: This variable s_emailAddress is not added to the global context map
    INFO: This variable s_cfgtyperet is not added to the global context map
    INFO: Adding the variable s_JtaAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_JtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: This variable n_uploadInterval is not added to the global context map
    INFO: This variable localhost is not added to the global context map
    INFO: This variable b_launchTools is not added to the global context map
    INFO: This variable b_launchBrowser is not added to the global context map
    INFO: This variable b_isUNIX is not added to the global context map
    INFO: This variable b_centralConsole is not added to the global context map
    INFO: This variable USE_HTTP_PROXY is not added to the global context map
    INFO: This variable USE_DB_CONSOLE is not added to the global context map
    INFO: This variable SET_CONSOLE_MODE is not added to the global context map
    INFO: This variable SA_SETUP is not added to the global context map
    INFO: This variable OC4JLOC is not added to the global context map
    INFO: This variable NO_PC_MODE is not added to the global context map
    INFO: This variable LOGGING_LEVEL is not added to the global context map
    INFO: This variable JRE_HOME is not added to the global context map
    INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
    INFO: This variable ISQLPLUS_PORT is not added to the global context map
    INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
    INFO: This variable HOSTNAME is not added to the global context map
    INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
    INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
    INFO: This variable EMPRODVER is not added to the global context map
    INFO: This variable CONSOLE_MODE is not added to the global context map
    INFO: This variable CONSOLE_CFG is not added to the global context map
    INFO: This variable sl_oraclehomes is not added to the global context map
    INFO: This variable s_oc4jDir is not added to the global context map
    INFO: This variable s_oc4jAppsDir is not added to the global context map
    INFO: This variable s_jreHome is not added to the global context map
    INFO: This variable s_configcommand is not added to the global context map
    INFO: This variable b_isRAC is not added to the global context map
    INFO: This variable b_UNIX is not added to the global context map
    INFO: This variable OJSP_JAR_LOC is not added to the global context map
    INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
    INFO: This variable LDAP_JAR_LOC is not added to the global context map
    INFO: This variable JAVA_HOME is not added to the global context map
    INFO: This variable ISQLPLUS_HOST is not added to the global context map
    INFO: This variable EM_UIX_LOCATION is not added to the global context map
    INFO: This variable EM_REPOS_HOST is not added to the global context map
    INFO: This variable EM_PING_COMMAND is not added to the global context map
    INFO: This variable EM_OC4J_HOME is not added to the global context map
    INFO: This variable EM_EAR_LOC is not added to the global context map
    INFO: This variable EMDROOT is not added to the global context map
    INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
    INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
    INFO: This variable s_launchBrowserClasspath is not added to the global context map
    INFO: This variable s_javapOracleHome is not added to the global context map
    INFO: This variable PROD_HOME is not added to the global context map
    INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
    INFO: passing params to cf done
    INFO: done saving info by cf
    INFO: This is a shared oracle home or remote nodes are null. No copy required.
    INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
    INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
    INFO: Checkpoint:Index file written and updated
    INFO: Checkpoint:Transfer of file done from remote node
    INFO: Adding iterator oracle.sysman.oii.oiif.oiifw.OiifwRootShWCDE
    INFO: Updating the global context
    INFO: Path To 'globalcontext.xml' = /opt/oracle/portal/db/ohome/install/chainedInstall/globalcontext
    INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
    INFO: Number of root scripts to be executed = 1
    INFO: isSuccessfullInstallation: true
    INFO: isSuccessfullRemoteInstallation: true
    INFO: Adding ExitStatus SUCCESS to the exit status set
    INFO: Completed setting up InstallDB
    INFO: Number of root scripts to be executed = 1
    INFO: Shutting down OUISetupDriver.JobExecutorThread
    INFO: Cleaning up, please wait...
    INFO: Dispose the install area control object
    INFO: Update the state machine to STATE_CLEAN
    INFO: All forked task are completed at state setup
    INFO: Completed background operations
    INFO: Moved to state <setup>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <setup>
    WARNING: Validation disabled for the state setup
    INFO: Completed validating state <setup>
    INFO: Verifying route success
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state finish
    INFO: FinishAction Actions.execute called
    INFO: Completed executing action at state <finish>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <finish>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <finish>
    WARNING: Validation disabled for the state finish
    INFO: Completed validating state <finish>
    INFO: Terminating all background operations
    INFO: Terminated all background operations
    INFO: Successfully executed the flow in SILENT mode
    INFO: Finding the most appropriate exit status for the current application
    INFO: Exit Status is 0
    INFO: Shutdown Oracle Database 11g Release 2 Installer
    INFO: Unloading Setup Driver
    ----------that is all----------
    re. PROCESSES/TASKS at the ending:
    Also I had a look in System Monitor and noticed there a TON of processes ("Sleeping") that show up in System Monitor at this time of "freezing" or "hanging" or whatever you want to call it (where nothing is visibly happening anymore).
    -The most recent shell script is "install_db_instance.sh" (not surprising) with Waiting Channel "do_wait".
    #!/bin/bash
    export JSK_DIR=${PWD}
    . $JSK_DIR/setup_env.sh
    export ORACLE_HOME=$DB_ORACLE_HOME
    export ORACLE_BASE=$DB_ORACLE_BASE
    echo ""
    #$DB_ORACLE_HOME/bin/dbca -createDatabase -templateName $JSK_DIR/General_Purpose.dbc -gdbName orcl -sid orcl -sysPassword $SCHEMA_PASSWORD -systemPassword $SCHEMA_PASSWORD -emConfiguration LOCAL -dbsnmpPassword $SCHEMA_PASSWORD -sysmanPassword $SCHEMA_PASSWORD -datafileJarLocation $DB_ORACLE_HOME/assistants/dbca/templates/ -storageType FS -datafileDestination $DB_ORACLE_DATA -responseFile NO_VALUE -characterset AL32UTF8 -obfuscatedPasswords false -sampleSchema true -oratabLocation ORATAB -recoveryAreaDestination NO_VALUE -silent
    echo "$ORACLE_HOME/bin/dbca -silent -responseFile $JSK_DIR/dbca.rsp  -sampleSchema true -oratabLocation ORATAB" >> $LOGS_DIR/install_commands.log
    $ORACLE_HOME/bin/dbca -silent -responseFile $JSK_DIR/dbca.rsp  -sampleSchema true -oratabLocation ORATAB
    cat $JSK_DIR/dbca.rsp | grep -v -i PASSWORD > $JSK_DIR/dbca_saved_no_passwords.rsp
    rm -f $JSK_DIR/dbca.rsp
    echo ""
    -Immediately after that is "java" with this Command Line:
    /opt/oracle/portal/db/ohome/jdk/jre/bin/java -DORACLE_HOME=/opt/oracle/portal/db/ohome [parameters] -DJDBC_PROTOCOL=thin -mx128m -classpath /opt/oracle/portal/db/ohome/assistants/dbca/jlib/dbca.jar:[otherJarFiles]:/opt/oracle/portal/db/ohome/dv/jlib/dvca.jar oracle.sysman.assistants.dbca.Dbca -silent -responseFile /opt/oracle/run/linux64/dbca.rsp -sampleSchema true -oratabLocation ORATAB
    -There are 7 named "oracleorcl" where the Command Line is simply "oracleorcl (LOCAL=NO)" or "oracleorcl (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))" -- Waiting Channel is "sk_wait_data".
    -There are 52 named "oracle" with various similar-looking Command Lines. The Waiting Channel for these varies: "poll_schedule_timeout", or "hrtimer_nanosleep", or "sys_semtimedop" (the 2 highest ProcessIDs -- aka most recent -- have this, with Command Line "ora_w000_orcl" and "xe_w000_XE").
    -There are 3 named "sqlplus", their Command Lines are "/opt/oracle/portal/db/ohome/bin/sqlplus -S -N" (the oldest 2), or "/opt/oracle/portal/db/ohome/bin/sqlplus" (the most recent) -- Waiting Channel is "pipe_wait".
    Message was edited by: DarrenAg (added PROCESSES/TASKS info)

  • I uninstalled Itunes because message "Itunes has stopped working" i attempted to reinstall now get error message "error occurred during installation before itunes could be configured" how to i fix for windows 8.1

    I have a PC with windows 8.1. My itunes folder is stored on external drive. I haven't used itunes for a while. I got a message to update to itunes 11.3.1. I got error message that "registry settings used by itunes for importing and burning CD's/DVD's has stopped working" I uninstalled itunes and attempted to reinstall. Now i get message" error occurred during installation before itunes could be configured" How do I fix this.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Why do I keep getting an error message saying "error occured during installation before iTunes could be configured"

    I am trying to install iTunes on my computer and everytime I do it says
    "error occured during installation before iTunes could be configured. Your system has not been modified" how do I fix this?

    Hi,
    Maybe the radio connection on the other end is not working. Hope this helps.
    xxmitchxx90

  • HT1926 After installing the lates version of iTunes, a bubble pops up and says, "iTunes installation complete, Error occured during installation before iTunes could be configured. Your system has not been modified.." How do I correct this?

    After installing the lates version of itunes on my Sony Vio, a bubble pops up which says:
    iTunes installation complete, ERROR occured during installation before iTunes could be configured. Your system has not been modified. To complete the installation process, run the installation again.
    I did this, but this bubble keeps appearing. What do I need to do?

    Hello there, glenkram.
    The following article outlines great steps to try for troubleshooting your very issue:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Can't boot Solaris 10 during installation

    I am stuck up with a petty problem while booting Solaris 10 1/06 from the installation CD no.1. The GRUB boot loader appears fine, but when I try to boot the Solaris kernel and module, a message appears
    Error 28: Selected item cannot fit into memory
    My x86 computer's configuration is as follows:
    Intel Pentium 4 processor 2.83 GHz
    RAM 128 MB
    HD 80GB
    I can't figure out whether the problem is really due to insufficient memory or do I need to install more RAM on my platform.Can someone help me out with this?

    128mb is plenty of memory. No it isn't plenty of memory. Solaris 10 Update 1 or Solaris Express needs at least
    256mb of memory. The initial root ramdisk that is loaded from the CD/DVD
    uncompresses to ~ 128mb already, leaving no space for the SunOS kernel on a
    system with only 128mb of memory!

  • Driver alias changes during installation of Solaris

    I have a HP LP1000r Netserver. It's a little 1u box with a hardware pci raid controller that is giving me some grief.
    The card is a HP NetRaid-1M. This card is bascially an OEM version of the AMI MegaRaid 475(Express 500). AMI's raid cards were bought out by LSI who doesn't have Solaris drivers for this card.
    There is a LSI MegaRaid driver disk for download from Sun but that seem to be just for new MegaRaid cards. Solaris has a AMI MegaRaid driver, "amr". Looking at the driver alias for the latest Solaris 10 x86 release the driver_alias does not contain the pci ids for my card.
    The Solaris amr driver seems to be a port of the FreeBSD amr driver (http://blogs.sun.com/roller/page/JoeyGuo?entry=hello_there_welcome_here). The FreeBSD driver lists support for "AMI MegaRAID Express 500 (Series 475)".
    So is there any way for me to tell the Solaris installation that my card should use the amr driver? I need to install to hard drives connected to this card.
    Would support for this card have been stripped when it was ported from FreeBSD?
    Thanks,
    -Matt H.

    I've installed FreeBSD on the system to verify that the HP NetRAID-1M is supported by the original amr driver, and it is.
    At the grub menu I've tried to modify the kernel parameters when launching the install to:
    kernel /boot/multiboot kernel/unix -B install_media=cdrom,"target-driver-for-pci103c,60e7"=amr
    I've also tried sd instead of amr. The quotes are because of the comma in the key name. I'm kinda guessing on the quote usage based on the info at the end of http://docs.sun.com/app/docs/doc/819-2379/6n4m1vldu?a=view.
    I came across http://forum.sun.com/jive/thread.jspa?forumID=291&threadID=89269 which sounds like it might work for me but building an install server just to modify a driver alias for a single machine is just a little much.
    If there is no way to just make Solaris see the card correctly during install, is there some way to make a driver disk that just adds extra alias and what ever else is need to make the existing driver work?

  • Trying to install iTunes and get this error: "The installer encountered errors before iTunes could be configured   Errors occurred during installation. Your system has not been modified"

    HELP!!!
    I am trying to install iTunes on my Windows 7 laptop and get this error:
    "The installer encountered errors before iTunes could be configured   Errors occurred during installation. Your system has not been modified"
    Arghhhhh!! I've tried different browsers and various other things suggested on other posts to no avail  

    Ok people, I think I have found the solution !
    If you click on the start button from your desktop screen.
    Then in the "search programs and files" field type : apple software update - you can find the apple installer.
    Click on the apple software update line and let the machine run it's course. I recommend updating whatever it wants to , ie: safari 5, quicktime, itunes....
    I then restarted my computer and it seems to be working now !
    Good luck everyone !

  • Bluetooth device is not detected during installation of bluetooth driver

    Hi , Initialy bluetooth was working properly, Few day ago I saw that there was no bluetooth icon in system trayas well as in list device manager. So I uninstalled the driver and try to install. But during installation it showthat bluetooth device in not detected and it exit. 

    Downloads the Windows 7 Hotkey Features. This will enable the wireless console with Fn+F5. Then you can enable bluetooth from there. Windows's built-in bluetooth drivers should work fine, maybe even with an update from WU if you're lucky.
    -tm
    Edit: Don't forget to download the System Interface Driver too.

Maybe you are looking for

  • Hyperlinks in Web Admin Client not working | BPC 10

    Hi all We are running: BPC10 SP 13 IE9 Office 2010 2 of our admin users have been haviing problems with the 'Launch' menu on the homepage of the BPC web interface homepage. This happens several times per day and in different environments. but there d

  • MMS not working LG G2

    I just got my device switched out 3 days ago due to my old phone messing up with MMS. It was working great until yesterday when the exact same problem I was having with my old LG G2 started occurring AGAIN! My picture messaging does not work at all,

  • How do I get back to the old Firefox icon?

    When we upgraded the browser yesterday, a new icon appeared for Firefox. We want foxy back! The new one is paper with pencil, ruler, paintbrush. Thanks!

  • Schedule a ABAP query from SQ01 to transfer the output to a file path

    I am trying to schedule an ABAP query to run every night and transmit the output as a .TXT file to a particular file path on a server. In the "output format" of the selection screen I selected the second last radio button "File store" and entered the

  • Help with error Netbeans 5.5.1 throws

    Hi all, I'm busy working on a project in J2EE using netbean 5.5.1 (project requirement). The project requires as to use Session, CMP and Message Driven Beans. My problem is with the Message Driven Beans while i know the code i am using is correct net