Solaris 10 HP Inkjet prints config file?
Hello All,
I was able to install the printer ok but when a try and print something I get about 6 pages of what appears to be a config file or something.
The printer is a HP 6122 and is attached via lp1.
I've tried changing the options in the printer properties view but it does not make any differance.
Any input would be appreciated.
Thank you,
Tom
Thanks Alan. I worked on trying to get the NIC working again last night. I had it working once, although the settings did not perist. I can still get the device to load, but I can't communciate with the router (it's not physical because another OS can reach it.
I took your advice and tried the sys-unconfig. But I did not have much success.
I am wondering if plopping in a new PCI NIC would be the most efficient route to get the server up.
What kind of NIC do you utilize and have had success with?
I am looking at possibly a DLINK DFE-530 or NetGear FA-311. I don't need wireless at this point just a rock solid DEV box.
Thanks again for the previous info.
Ted
Similar Messages
-
Printing from file manager in Solaris 10
Is is possible to print from file manager in Solaris 10, I can print from the command line but not from file manager, when I try there is no output lpstat shows nothing and no error messages. Latest patches are applied as of 14/04/08.
Edited by: its_mallen on Apr 15, 2008 5:37 AMI've found I can print as root but a user can't, wondering if there are any special privilages, I've found an allow and deny command but they can print from the command line so not sure this will fix the problem
-
Print Text File in NW 3.12?
I have to admit some ignorance regarding NetWare printing, so my
apologies in advance...
I work for a document management company, and am trying to find a
solution for a customer running a fairly archaic, DOS 6.22-based
application that utilizes a NetWare 3.12 server for file and print
services. My need is to retrieve print output from their application,
in the form of a text file, and then reprocess it for automated faxing
through a fax server device.
My problem is this: their application seems to print directly to a
printer by defining what it calls a "network port" (which seems to map
to a spooler, 0 through 5) or LPT1, and by referencing a printer
definition. As far as I can tell, the files that are deposited in the
print queue are byte streams, i.e., they're not human-readable (they
have extra characters that I'm assuming are control characters). They
therefore aren't usable by my print distribution software.
I've tried using CAPTURE to send to a text file, but the application
seems to conflict with the command. If I set CAPTURE, then start the
application and send a job to LPT1, the application returns an error
that the printer is unavailable. Upon exiting the application the port
is no longer being captured (although I've tried all of the options I
can think of to keep it so). Oddly enough, the application does
successfully print a text file to LPT2 (for a barcode printer), which
is CAPTUREd via a command in the system autoexec.bat. This is done a
different part of the application.
If anyone can help me figure out a way to generate a text file in this
environment, or to work with the print file that's currently being sent
to the queue (e.g, can it be translated somehow to a simple text file?),
that would be much, much appreciated. This customer is in a tight spot,
with an unsupported application that they can't presently afford to
upgrade. My solution would save them enough money over time to replace
the system.
Again, thanks in advance for any help!
wynand32If the Dos app has no print drivers included, then indeed it is relying
on NW and PRINTDEF/PRINTCON to do the formatting stuff. That must have
already been set up for it to be successfully printing now, it's just a
matter of adding a definition that doesn't do anything to the print text.
>In fact, given my ignorance of the NetWare environment, I'm not sure
how the term "driver" even applies, unless it would refer to the
printer definition.
I was referring to a driver within the Dos app, nothing to do with
NetWare. For instance Word Perfect for Dos came with Dos drivers for all
sorts of printers, one of which was a generic text driver.
>I wonder: is there a setting in PRINTDEF that could be changed for one
of the printer configs that would influence the output? Or, would
PRINTCON apply in this environment?
Not supplied, AFAICS, but either one of the simpler print drivers
supplied such as Diablo will do, or you'd need to set one up. Hopefully
http://www.novell.com/documentation/...a/fm19724.html
will help you enough as it's been too long since I did it to remember
the details.
Andrew C Taubman
Novell Support Forums Volunteer SysOp
http://support.novell.com/forums
(Sorry, support is not provided via e-mail)
Opinions expressed above are not
necessarily those of Novell Inc. -
My Wireless HP ENVY 4500 All-In-One Printer Has Stopped Printing PDF Files
I installed the subject wirelessly printer about 1 years ago. It works quite well with my iMac OS X10.9.1 desktop and my Win7 laptop PC. But, it recently stopped printing PDF files for no apparent reason, and I get no error messages.
It won't print PDFs from my browsers nor from Adobe Reader (11.0.07) ... but all other document file types print OK from my browsers and Reader.
The only thing that comes close to printing PDFs is that sometimes, when I try to print a PDF page or file from within Adobe Reader, it prints - on a single sheet - 6 tiny duplicate sections of what appears to be the upper right-hand quadrant only of the original PDF document.
Please note that I un-installed and re-installed the printer and its driver twice without success. Also, no amount of printer re-configuring of layout, size, etc. made a difference. I received some previous work-around advice about converting the PDFs to a Word document, and printing that. But this is just not convenient; and besides, the printer is suppose to print PDFs (PDF is my document of choice for basically all my collaborative work). I should also state that I received no help with this problem from the HP ENVY user group forum; so, I guess that means you may be my last resort. And finally, I don't know if this is relevant or not, but I upgraded my iMac from Snow Leopard (OS X 10.6) to Mavericks (OS X 10.9) a few months ago - this upgrade was frought with all sorts of teething problems! - and I am now somewhat suspicious that something in the upgrade might have something to do with my current PDF problem.
Could someone please advise me on any Adobe Reader and/or printer re-configs, re-sets or other actions I should try?
ThanksCorrection to initial post: The 6 tiny sections incorrectly printed on a single sheet are actually from the bottom right-hand quadrant of the original PDF page - NOT the upper right-hand quadrant.
-
Printing PDF files with smb/cups not possible // SLPReg status -20!
Hello *,
i am running SAMBA 3.6.1-1 and CUPS 1.5.0-1 on a dedicated system. Printer: Canon Pixma IP4500 (USB).
The problem is that all Windows 7 clients are not able to print PDF files (since few months) on that printer while printing these files with Linux software is no problem. The PDF files are neither encrypted nor forbidden to print.
I tried to print with Adobe Acrobat Reader X (latest) and Foxit Reader. Both are preparing the pages to be printed and close their printing dialog after processing. Windows printing queue does not show any jobs (which it even does not when printing simple images with MS Paint, which is not a problem).
Windows systems are using the Canon Inkjet 4500 and Canon iP 4500 driver (manually installed). Printing images works with both drivers.
I searched for "SLPReg […] failed with status -20!" but found no helpful information.
/var/log/cups/error_log
D [24/Dec/2011:23:05:35 +0100] Report: clients=0
D [24/Dec/2011:23:05:35 +0100] Report: jobs=499
D [24/Dec/2011:23:05:35 +0100] Report: jobs-active=0
D [24/Dec/2011:23:05:35 +0100] Report: printers=2
D [24/Dec/2011:23:05:35 +0100] Report: printers-implicit=0
D [24/Dec/2011:23:05:35 +0100] Report: stringpool-string-count=199735
D [24/Dec/2011:23:05:35 +0100] Report: stringpool-alloc-bytes=14344
D [24/Dec/2011:23:05:35 +0100] Report: stringpool-total-bytes=3718136
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "eth0" = 192.168.2.9:631
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "eth0" = [v1.fe80::1e6f:65ff:fe51:1b3+eth0]:631
D [24/Dec/2011:23:05:36 +0100] send_slp_browse(0x7f7d52023050 = "IP4500")
E [24/Dec/2011:23:05:36 +0100] SLPReg of "IP4500" failed with status -20!
D [24/Dec/2011:23:05:48 +0100] send_slp_browse(0x7f7d52017c90 = "IP4500_Duplex")
E [24/Dec/2011:23:05:48 +0100] SLPReg of "IP4500_Duplex" failed with status -20!
D [24/Dec/2011:23:06:07 +0100] send_slp_browse(0x7f7d52023050 = "IP4500")
E [24/Dec/2011:23:06:07 +0100] SLPReg of "IP4500" failed with status -20!
D [24/Dec/2011:23:06:19 +0100] send_slp_browse(0x7f7d52017c90 = "IP4500_Duplex")
E [24/Dec/2011:23:06:19 +0100] SLPReg of "IP4500_Duplex" failed with status -20!
D [24/Dec/2011:23:06:35 +0100] Report: clients=0
D [24/Dec/2011:23:06:35 +0100] Report: jobs=499
D [24/Dec/2011:23:06:35 +0100] Report: jobs-active=0
D [24/Dec/2011:23:06:35 +0100] Report: printers=2
D [24/Dec/2011:23:06:35 +0100] Report: printers-implicit=0
D [24/Dec/2011:23:06:35 +0100] Report: stringpool-string-count=199735
D [24/Dec/2011:23:06:35 +0100] Report: stringpool-alloc-bytes=14344
D [24/Dec/2011:23:06:35 +0100] Report: stringpool-total-bytes=3718136
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "eth0" = 192.168.2.9:631
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "eth0" = [v1.fe80::1e6f:65ff:fe51:1b3+eth0]:631
D [24/Dec/2011:23:06:38 +0100] send_slp_browse(0x7f7d52023050 = "IP4500")
E [24/Dec/2011:23:06:38 +0100] SLPReg of "IP4500" failed with status -20!
D [24/Dec/2011:23:06:50 +0100] send_slp_browse(0x7f7d52017c90 = "IP4500_Duplex")
E [24/Dec/2011:23:06:50 +0100] SLPReg of "IP4500_Duplex" failed with status -20!
/etc/samba/smb.conf
load printers = yes
printing = cups
printcap = cups
[printers]
path = /var/spool/samba
printable = yes
public = yes
writable = no
/etc/cups/printers.conf
# Printer configuration file for CUPS v1.5.0
# Written by cupsd on 2011-12-24 22:25
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer IP4500>
UUID urn:uuid:f9850f70-d898-39ad-4e0a-9edfecf4977b
Info Canon iP4500 series
Location Keller
MakeModel Canon PIXMA iP4500 - CUPS+Gutenprint v5.2.7
DeviceURI usb://Canon/iP4500%20series?serial=42E635
State Idle
StateTime 1306084752
Type 45084
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
DenyUser xy
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer IP4500_Duplex>
UUID urn:uuid:14fcd3ca-2118-380e-5033-79beb09bb3b7
Info Canon iP4500 series (Duplex)
Location Keller
MakeModel Canon PIXMA iP4500 - CUPS+Gutenprint v5.2.7
DeviceURI usb://Canon/iP4500%20series?serial=42E635
State Idle
StateTime 1324761079
Type 45084
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>Hi,
I can, unfortanetly, confirm this problem for me with a Brother HL-2030 and an HP Officejet 5600 series.
cups error log
D [03/May/2012:21:42:46 +0200] Report: printers=3
D [03/May/2012:21:42:46 +0200] Report: printers-implicit=0
D [03/May/2012:21:42:46 +0200] Report: stringpool-string-count=10577
D [03/May/2012:21:42:46 +0200] Report: stringpool-alloc-bytes=13088
D [03/May/2012:21:42:46 +0200] Report: stringpool-total-bytes=192536
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "eth0" = 192.168.2.100:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "tun0" = 10.8.0.1:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "eth0" = [v1.fe80::201:2eff:fe27:6993+eth0]:631
D [03/May/2012:21:43:48 +0200] Report: clients=0
D [03/May/2012:21:43:48 +0200] Report: jobs=233
D [03/May/2012:21:43:48 +0200] Report: jobs-active=0
D [03/May/2012:21:43:48 +0200] Report: printers=3
D [03/May/2012:21:43:48 +0200] Report: printers-implicit=0
D [03/May/2012:21:43:48 +0200] Report: stringpool-string-count=10577
D [03/May/2012:21:43:48 +0200] Report: stringpool-alloc-bytes=13088
D [03/May/2012:21:43:48 +0200] Report: stringpool-total-bytes=192536
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "eth0" = 192.168.2.100:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "tun0" = 10.8.0.1:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "eth0" = [v1.fe80::201:2eff:fe27:6993+eth0]:631
D [03/May/2012:21:44:50 +0200] Report: clients=0
D [03/May/2012:21:44:50 +0200] Report: jobs=233
D [03/May/2012:21:44:50 +0200] Report: jobs-active=0
D [03/May/2012:21:44:50 +0200] Report: printers=3
D [03/May/2012:21:44:50 +0200] Report: printers-implicit=0
D [03/May/2012:21:44:50 +0200] Report: stringpool-string-count=10577
D [03/May/2012:21:44:50 +0200] Report: stringpool-alloc-bytes=13088
D [03/May/2012:21:44:50 +0200] Report: stringpool-total-bytes=192536
printers.conf
# Printer configuration file for CUPS v1.5.0
# Written by cupsd on 2011-12-24 13:14
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer CUPS-PDF>
UUID urn:uuid:ad99f5dd-2577-355f-759c-6b2941a88d34
Info Virtual PDF Printer
Location Zion
MakeModel Generic CUPS-PDF Printer
DeviceURI cups-pdf:/
State Idle
StateTime 1309396700
Type 8450124
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer HL2030>
UUID urn:uuid:1b453a5d-ade0-3ddb-45e4-c5bcfe1feabd
Info Brother HL-2030 series
Location Zion
MakeModel Brother HL-2030 Foomatic/hl1250 (recommended)
DeviceURI usb://Brother/HL-2030%20series?serial=G6J274210
State Idle
StateTime 1324728260
Type 8433668
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer HP5600>
UUID urn:uuid:8d882659-3c7e-319f-5072-38d14683cfaf
Info HP Officejet 5600
Location
MakeModel HP Officejet 5600 Series, hpcups 3.11.10
DeviceURI hp:/usb/Officejet_5600_series?serial=CN838F31ZQ04B2
State Idle
StateTime 1324728896
Type 8425484
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
smb.conf
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = yes
# Set public = yes to allow user 'guest account' to print
guest ok = yes
writable = no
printable = yes
Did you find a solution in the meantime? -
Default filename for print to file in Linux
Hi,
I'm using print to file in Linux, and I'd like the default filename to be the page title. I couldn't find a config option for this. It retains the last file name I used, which is very problematic for me, as I can easily overwrite my last printed file by accident.
I'd also like the printer to default to print to file. Is that possible? Not a big deal, but it would save me a click. :-)
BTW, I've found that the print to file for PDFs is excellent. It often produces PDFs that half the size of other options I've tried. Thank you!
AriThis is not solved as I do not know where to change the default directory.
-
Using Bash script to edit config file
This is a really simple question, but given that I'm just learning Bash scripting and having this solved now would be really illustrative for me, I would really thank some help here.
I'm using uzbl, and running Tor+Polipo. So, as you will see below in the tail of the config file, there is a line to redirect the requests of uzbl through Polipo.
# === Post-load misc commands ================================================
sync_spawn_exec @scripts_dir/load_cookies.sh
sync_spawn_exec @scripts_dir/load_cookies.sh @data_home/uzbl/session-cookies.txt
# Set the "home" page.
#set uri = https://duckduckgo.com
# Local polipo proxy
set proxy_url = http://127.0.0.1:8123
# vim: set fdm=syntax:
What I want to accomplish is to comment in/out that line with a key shortcut on Awesome. I've thought of doing 2 scripts to do so and using 2 differente key shortcuts, but I want to "toggle" the proxy redirection with only 1 shortcut. To do so, I suppose that the script should go something like:
if
tool 'set proxy_url = http://127.0.0.1:8123' config_file
then
tool '#set proxy_url = http://127.0.0.1:8123' config_file
else
if
tool '#set proxy_url = http://127.0.0.1:8123' config_file
then
tool 'set proxy_url = http://127.0.0.1:8123' config_file
fi
fi
I know little about sed, but I think is the tool for this job. The most intriging part to me is to ask sed to print the regular expression when it finds it in the config file, and use that as an input in the conditional statement.
Well, this is a mess I have done here. Hope there is a simple answer to this.
Thanks in advance.-You can do this with a single sed command:
sed -i 's/^#set proxy_url/set proxy_url/;
t end;
s/^set proxy_url/#set proxy_url/;
: end' config_file
This edits the file in-place (-i) and first tries to replace the commented with the uncommented line. If that suceeds, sed jumps to the "end" label. If not, it tries to replace the uncommented with the commented line. Thus you don't have to include any logic about the current state: if the first substitution succeeds, the line was obviously commented, if not, it was uncommented, and the second substitution should succeed.
Note that my knowledge of sed is very limited. There might be a simpler way to do this.
EDIT: For the sake of example, here's how to do the same in bash using regular expressions. Note how this script needs to use a temporary file to simulate in-place editing, how it needs to process the file line by line manually, etc. All things that sed does out of the box...
#!/bin/bash
tmp=test.conf.tmp
echo -n "" > "$tmp"
while read line; do
if [[ "$line" =~ ^#set\ proxy ]]; then
echo "${line/\#/}" >> "$tmp"
elif [[ "$line" =~ ^set\ proxy ]]; then
echo "#$line" >> "$tmp"
else
echo "$line" >> "$tmp"
fi
done < test.conf
mv test.conf.tmp test.conf
To answer your original question, the line
if [[ "$line" =~ ^#set\ proxy ]]; then
reads: if the line begins with a "#", followed by "set proxy", then...
Last edited by hbekel (2011-03-20 10:40:16) -
HP7680 inkjet printer prints narrow blank (white) lines in multiple specific parts of page
My HP7680 inkjet printer prints narrow blank (white) lines in multiple specific parts of each printed page. It appears to happen in the same parts of each page printed.
- I installed new ink cartridges
- I verified that the paper I’m using is the standard inkjet paper that I always use
- In the tools section of the printer setup menu, I ran the “Clean Printhead”, “Align Printer”, and “Calibrate Linefeed” options
- In reading the printer’s manual, it seems to imply that the printheads could be the problem.
- So, I manually cleaned the printhead contacts
- When I print the self-test diagnostics page, it shows printhead health to be “Good” for both. One of them was installed in January of 2009, and the other was installed March of 2008.
- With a Q-tip, I even cleaned the clear plastic band that runs parallel to the carriage rod. (It was pretty dirty.)
Here's a scan of the printed output.
Thanks for your help!After a 2hr phone call with tech support, here is the solution; the L7600 Series printer have a firmware update (file name: OfficejetProK7600_R2011PxN.exe) my printer was bought in 2008 thus my print head is a 2008 model, and new print heads are a 2011 modem, they don’t work right in a 2008 model this is PER the tech rep and his name was John unless you upgrade the firmware.
So I upgraded the firmware from a 2004NxN to the 2011PxN and now my printer says damaged or missing print head, I place the original print head from 2008 back in the machine and it’s fine, so I bought a 3rd print head for 2011 and it says the print head is damaged.
After another 30min or so I was told I have a bad printer and sorry the warranty is out, but the old print head works but any new print heads do not, this sounds like a HP Error firmware / hardware compatibility issue, not my issue, but HP will not repair.
HP has no fix nor will they repair the printer. -
How text appears on page using an inkjet printer vs. Postcript
Hello,
I use Adobe Postcript fonts in my InDesign documents, and I like the way they look on a printed page when I use a Postscript printer.
When I print a document on an inkjet printer the text looks blotchy and bloated, with the letters poorly formed.
In my work I export the InDesign documents I write to a .pdf file and email them to the people I work for. When they print the documents it looks as bad on their inkjet printer as it does on mine.
It is what they are used to and they don't complain, and truth be told the inkjet-printed documents do not look terrible, but they don't look nearly as good as when they are printed on a Postcript printer.
Is there a way, a preference setting perhaps, that I can make adjustments in the document so that the inkjet version looks as good as the Postscript version?
Thank you,
PatrickFrom the Xerox page
Run Black feature lets you keep printing if you run out of color toner.
Sounds good to me. A lot of color printers will stop working if one of the toner cartridges is low but sounds as thought this one will keep printing from the black cartridge even if one of the others is out. I will also note that I got it last year for $250 from Office Depot/Staples with the duplexer (both had it). The Staples price is a killer. No duplexer but under $200.
This is in the See Online Partners at the right. -
Xdo delivery config file: unknown server elements
I am working on XML Pubisher for E-Business Suite version 5.6.3 with the EBS Bursting integration patch.
I have created a xdodelivery.cfg config file to include a IPP printer definition:
<config xmlns="http://xmlns.oracle.com/oxp/delivery/config">
<servers>
<server name="fb" type="ipp_printer">
<uri>http://vumc-pr01/printers/FB-PR17/.printer</uri>
<authType>basic</authType>
<username>***</username>
<password>***</password>
</server>
</servers>
</config>
In my bursting control file I use the printer name ("fb") to deliver the bursted output to.
Unfortunately the bursting request produces the following error in the log file:
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:servers
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:server
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:uri
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:authType
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:username
[080508_015652534][][STATEMENT] ConfigReader: Unknown element:password
In the manual it was clearly stated that the element <servers> <server> etc could be used to setup a printer definition.
Anyone any idea what goes wrong here?
Thanks.I am working on XML Pubisher for E-Business Suite version 5.6.3 with the EBS Bursting integration patch.
I have created a xdodelivery.cfg config file to include a IPP printer definition:
<config xmlns="http://xmlns.oracle.com/oxp/delivery/config">
<servers>
<server name="fb" type="ipp_printer">
<uri>http://vumc-pr01/printers/FB-PR17/.printer</uri>
<authType>basic</authType>
<username>***</username>
<password>***</password>
</server>
</servers>
</config>
In my bursting control file I use the printer name ("fb") to deliver the bursted output to.
Unfortunately the bursting request produces the following error in the log file:
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:servers
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:server
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:uri
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:authType
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:username
[080508_015652534][][STATEMENT] ConfigReader: Unknown element:password
In the manual it was clearly stated that the element <servers> <server> etc could be used to setup a printer definition.
Anyone any idea what goes wrong here?
Thanks. -
SSL Flex Remote Object - no remoting-config file
I realize that this topic has been discussed a lot, and I think
I have the solution figured out.
The problem is that I have to edit the remoting-config file - and there isn't one!
I've hunted high and low on the server, and I just don't have the file.
We are using Coldfusion 8,0,0,176276 Enterprise, and I have an instance for my flex applicaitons (we have multiple instances running, and none of them have the file). The server is running on a Solaris VM.
How do I fix this problem??
Thanks!
JennMy context root is specified as the default "/" When I remove the context root variable from the services-config.xml, it can't find the file. I don't know where I can change context root, but I am confused as to what it should be, regardless.
Add the -context-root to the compiler options, just like -services and set it to an empty string
-services="/Applications/JRun4/servers/cfusion/cfusion-ear/cfusion-war/WEB-INF/f lex/servics-config.xml" -context-root="" -
How can I ensure the integrity of my config files?
I'm designing a system with some powerful features and I would like to make sure that the config files change only through my program. My concern is people running this on any of the Windows systems without a ACL. I was thinking of storing all the config files in Hsqldb and running them as virtual files through my program. This way I can encrypt the data, and enforce it easier through my program's ACL. I was also thinking of running a checksum on the data after any alterations and using this to compare whenever I read the data from there. I realize I can't physically stop someone from deleting the data who's in front of the machine but I'd like to make sure the integrity of my files is solid. I have reasons for designing it this way.
DW will be much easier to learn if you spend a few days learning the basics first. HTML and CSS are the ABC's and 123's of web design. If you don't have a basic understanding of code and web terminology, DW will be an up-hill struggle for you.
Start here:
http://w3schools.com/
Then work your way through this 6-part tutorial.
Creating your first web site in DW CS4 -
http://www.adobe.com/devnet/dreamweaver/articles/first_cs4_website_pt1.html
Best of luck,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com -
Airport Express - cannot read config file - cannot Hard reset
Anyone, please help!
I have an Airport Express as an 'add to an existing network' connected to the UFO Base Station (White). The internet connection is fine, but I cannot read the config file to access the wireless printer part. I have tried to reset the express - it resets it goes green still no read. I have tried to hard reset this back to the factory settings. Same thing, it thinks about it then everything is back green, same as before and I still cannot read the config. I will add that I have had to reset or hard reset or mess with this once a week since I got this. Is there anything else I can try. I have nothing connected to the express everything is wireless. Please I do know how to do a hard reset, its just not accepting the command.
Anyone, please....Are you sure it's not alternating amber/green? I have seen it, it's hard to tell, if you are color blind
, it's even harder.
http://docs.info.apple.com/article.html?artnum=108045 -
hi,
I'm kind of stuck with the nbd config file, it just doesn't work correctly. It currently looks like this:
$ cat /etc/nbd-server/config
[generic]
[nbdexport]
exportname = /nbdfile
port = 1234
starting nbd via /etc/rc.d/nbd works fine, however, the expected export is not running. Instead I get:
$ netstat -tulpen
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 0.0.0.0:10809 0.0.0.0:* LISTEN 0 8746628 29192/nbd-server
As you can see, nbd is running on port 10809 instead of 1234 and connecting doesn't work either:
$ nbd-client localhost 10809 /dev/nbd0
Negotiation: .Error: Not enough cliserv_magic
Exiting.
If I start nbd-server manually, everything works as expected.
nbd-server -C " " 1234 /nbdfile
I add a non-existent config file (-C) because otherwise nbd parses the config file as well.
What am I missing here? Is this a bug? I tried a lot of different options in the config but it simply never works as expected.Does anybody figure out how to specify the port?
I have a weird behavior with `nbd-server` (3.10). If I specify the port, it still listens to a bunch of other ports. Only listening to the default port work for some reason.
~ sudo nbd-server localhost:9000 /dev/sdc
** (process:3121): WARNING **: Specifying an export on the command line is deprecated.
** (process:3121): WARNING **: Please use a configuration file instead.
Below you can see that it listens to a bunch of other ports, including the default one.
~ sudo netstat -tlnp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:55055 0.0.0.0:* LISTEN 3122/nbd-server
tcp 0 0 0.0.0.0:10809 0.0.0.0:* LISTEN 3122/nbd-server
tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 3122/nbd-server
tcp6 0 0 :::51489 :::* LISTEN 3122/nbd-server
tcp6 0 0 ::1:9000 :::* LISTEN 3122/nbd-server
My config file is simple:
[generic]
user = nbd
group = nbd
[otherexport]
exportname = /dev/sdc
#port = 9000
Of course, it prints a warning that specifying an export on the command line is deprecated. But without `/dev/sdc` argument it will ignore the port completely and listen to the default port.
~ sudo nbd-server localhost:9000
~ sudo netstat -tlnp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:10809 0.0.0.0:* LISTEN 3171/nbd-server
Running it without any arguments does work. It starts without warnings and it listens to only one port, as you can see below. Unfortunately that's not the port I want it to listen to:
~ sudo nbd-server
~ sudo netstat -tlnp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:10809 0.0.0.0:* LISTEN 3222/nbd-server
Switching to oldstyle protocol does not work:
~ sudo nbd-server
** Message: Since 3.10, the oldstyle protocol is no longer supported. Please migrate to the newstyle protocol.
** Message: Exiting.
the config for the command above ^ was
[generic]
oldstyle=true
user = nbd
group = nbd
[otherexport]
exportname = /dev/sdc
port = 9000 -
Cisco spa502g incorrect config file provisioned
Hi Guys,
Apologies if this is not in the right location for this question. But i have several phones which have not been rmeoved from the portal correctly or have been used as test phones on site. Now i have been able to get them removed from portal so that i can use them again however the issue i face is i cant reset the physical phones, they currently have a config file which if you log into the phone is asking for username and password so i cant check the URL for the provisioning file. I have no idea what this username and password would be and i have also tried doing it through the phone to no avail. I have read about how it may be possible to force a config file on using a tftp server, so have downloaded Solar winds but will be honest i have no idea how to do it. Nor have i got a config file to put on the phone.
I am in a business enviroment so have got a POE switch and plugged laptop directly in and a SPA502G plugged in next to it. I have left the device all weekend to see if it would pick up a new config file after it cant find one as this was advised to me by BT wholesale. This has not worked either.
Could somebody please asssit me with either explaining how i can get a config file on using solar winds tftp or if somebody knows another process on how i can reset these phones to ensure they have got the right provision file.
Look forward to your response.
Thank youWrong forum, post in "small business - SPA phones": You can move your posting with the Actions panel on the right.
Maybe you are looking for
-
Umwandlung .docx- pdf - Bilder fehlerhaft (Musterfüllung)
Hallo, ich habe ein Problem beim umwandeln von Word Dokumenten in PDF mit Acrobat X Pro. Ich benutze in Acrobat die Funktion PDF erstellen. Im Word Dokument habe ich Excel Tabellen mit streifiger Musterfüllung (das sind eigentlich ganz feine Streifen
-
Hi, after some investigation i've found out that in the reports server cache there are two exact copies of each report. It seems as though that each time a report is generated , the server makes two specular copies of the same report. The same thing
-
Unable to open the a webpage in the custom tab in internet explorer.
Hi all- I created a custom tab in the Siebel-On-Demand CRM and everyone have ability to view and access the tab. People are able to see and open a webpage in custom tab in mozilla firefox browswer; however, it doesn't allow me open a page in custom t
-
I am getting error when installing the MDM payload, the SCEP is working fine but while installing the MDM payload ,I am getting the following errors MCHTTPTransactionErrorDomain , The server certificate for https://url is invalid. MCInstallationError
-
DROID X DOES NOT RETRIEVE EMAIL UNLESS POWERED OFF, THEN ON
I've identified through testing and confirmed that my 3 day old Droid X does NOT actually retrieve email from a third party (non Google) mail server WITHOUT having to power it down, then back up first. Activating the cute little manual retrieving sp