Solaris 10 installation failure from cd's

Hi All,
I am attempting to install Solaris 10 on my x86 laptop. I run the installation from cd #1 and go through the steps and installation will begin. I am choosing to install the entire distribution and when cd #1 finishes (about 500 mb of the 4000mb) the machine is not prompting for the other cd's. The machine will simply reboot and give "Solaris 10 installation partially failed."
Upon reboot the grub screen appears and it will load and then fail.
Any ideas? Am I missing a step somewhere? Thanks.

Similar Messages

Solaris Installation question (from sun course)

Hello, I am just learning about solaris from the course WS-2001-S10. I hope this kind of question is fit for this forum...otherwise please direct me to where I can ask about it.
There is a review question at the end of the installation module like this:
Which Solaris 10 OS installation methods are available to perform a standard upgrade?
     Solaris suninstall and Custom Jumpstart
     [x]Solaris suninstall, Solaris Web Start, and Custom Jumpstart
     Solaris Web Start and Custom Jumpstart
Feedback:
     Correct.
The correct answer is 2 but i don't really get it why. In the course they say nothing about Web Start and from what i have read Web Start is just a Web-Based Jump Start installation.
In the course SUN says that "The methods available for a standard upgrade are Solaris GUI installation, the CLI installation, and the custom JumpStart procedure. "
So "suninstall, Solaris Web Start, and Custom Jumpstart" from the answer equals "Solaris GUI installation, the CLI installation, and the custom JumpStart procedure" from course...
Also from what I understood the jumpstart installation is also CLI ...(totally confused now)
Can someone shed some light on this please?
Edited by: realthor on Feb 1, 2010 2:18 PM

Installation Guide
[http://docs.sun.com/app/docs/doc/806-5205]
suninstall = CLI
Web Start = GUI (or CLI)
Custom JumpStart = CLI

ASM installation failure from Oracle GRID under Windows 7 64 bit

I am a rookie..I am running Oracle database 11gR2 running on a Windows 7 64 bit system.
I am implementing ASM onto my system solely for learning purposes
The implementation of ASM has changed between database releases 11gR1 and 11gR2 such that it is no longer configured locally but is now implemented from within Oracle GRID. Unfortunately, the book I am using to study my OCP from was written at the time of 11gR1 so I can no longer follow its instructions to create and configure ASM. Instead of using DBCA I now need to use ASMCA to configure ASM.
As a preliminary requirement I successfully installed Oracle Grid and configured it to run on my standalone server.
I created two partitions on my harddrive ...... drive G: and drive H: with intent of using them as my ASM disks. 45 Gig and 50 gig in size respectively formatted with the NTFS filesystem.
I ran ASMCA in an attempt to create an ASM instance
I specified these partition drives '\\.\G:' and '\\.\H:' in the disk discovery path which were successfully picked up.
However when ASMCA executed the creation process after some time it failed with the following message:
One or more diskgroup(s) creation failed as below:
DiskGroup mydisks creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-00600: internal error code, arguments: [17090], [], [], [], [], [], [], [], [], [], [], []
Check C:\app\peter\cfgtoollogs\asmca\asmca-12101712AM0558.log for details.
Which I did and found many things
Thread-40] [ 2012-10-17 00:25:05.723 EST ] [UsmcaLogger.logInfo:141] Oradim Command : C:\app\11.2.0\grid\bin\oradim.exe -new -asmsid +ASM -startmode manual -srvcstart demand -spfile
[Thread-40] [ 2012-10-17 00:25:05.723 EST ] [UsmcaLogger.logEntry:113] Entering oracle.sysman.assistants.usmca.util.UsmcaUtil Method : executeCommand
[Thread-40] [ 2012-10-17 00:25:05.723 EST ] [UsmcaLogger.logInfo:141] Command: C:\app\11.2.0\grid\bin\oradim.exe -new -asmsid +ASM -startmode manual -srvcstart demand -spfile
[Thread-40] [ 2012-10-17 00:25:07.254 EST ] [UsmcaLogger.logInfo:141] Instance created.
Ok. As above the ASM instance appeared to have been successfully created so as part of my investigative process to confirm what the script actually did successfully execute I attempted to log into the ASM instance to see how far it would get. It fails with the following result
C:\Windows\system32>set ORACLE_SID=+ASM
C:\Windows\system32>sqlplus sys as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Wed Oct 17 10:16:36 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
I checked Windows Task Manager
There is an OracleOHService and it is running
LISTENER is running ie the local listener running on port 1521 that was originally created with a previous basic stand alone installation of the Oracle 11gR2 database . (ie before I installed Oracle GRID). No other listeners are running.
Can t see any evidence of any ASM service on Windows Task manager started/stopped or otherwise. Neither can I see evidence of a CSS service.
The log file that was generated is large I am not clear on what I should be looking for in order to find clues as to how I might manually resolve this problem and possibly 'salvage' the installation. Any advice would be appreciated.

Hi,
read the documentation:
http://www.oracle.com/pls/db112/to_pdf?pathname=install.112/e24169.pdf
and you will find multiple errors, you probably did.
Especially the part on preparing storage.
Regards
Sebastian

Leopard Installation Failure from 10.4.10 AdditionalVoice

Two attempts with installation (took default) - took long time to verify DVD install disc - failed twice 50% into full installation after verified returning that addition speech items could not be verified on DVD I assume.
I was able to remove installation DVD and rebooted from HD - took a few minutes to come up and 10.5 was showing as the installed version ?
I am now checking what has been installed - seems new features are present and working - confused now what failed and what was installed?
This is more like a Microsoft than Apple installation.

It is an issue with Symantec Antivirus

To run setup from extracted folder(from before installation/failure) should be OK

I went install dw cs6 win but failed... I upgrded my vista to sp2 (from sp0) seems now must succeed, well is needed re-extract exe file (downloaded) or to run setup from extracted folder(from before installation/failure) should be OK?

I went install dw cs6 win but failed... I upgrded my vista to sp2 (from sp0) seems now must succeed, well is needed re-extract exe file (downloaded) or to run setup from extracted folder(from before installation/failure) should be OK?

Assertion failure from ccfe in Solaris Studio 12.4 beta July refresh

I have found a way to get an assertion failure from the ccfe program that comes with the Solaris Studio 12.4 beta July refresh. The error that gets printed is:
>> Assertion:   (../lnk/funcsym.cc, line 1679)
    while processing text_woarchive.pre.cpp at line 0.
The problem occurs whilst compiling Boost 1.54. The original file in the distribution that causes it is libs/serialization/src/text_woarchive.cpp.
This problem can be reproduced by getting the pre-processed code I've put on http://pastebin.com/E9vxi2z7 and pasting it into a file called text_woarchive.pre.cpp. Then run:
CC -std=c++11 -mt -m64 -c -o text_woarchive.o text_woarchive.pre.cpp
and you get the assertion failure.
Running:
CC '-#' -std=c++11 -mt -m64 -c -o text_woarchive.o text_woarchive.pre.cpp
shows that the assertion is coming from ccfe.
In case you go back to the original Boost source code I should tell you that prior to generating the pre-processed source I changed:
#ifdef __SUNPRO_CC
to:
#if 0
in boost/archive/detail/register_archive.hpp. I did this because there was an error in the __SUNPRO_CC section and I wondered if that workaround code was no longer required with the more modern C++ compiler. Therefore, I cannot guarantee that the pre-processed source is 100% valid C++ code. However, even if it's not it would be nice to get a clear error message out of ccfe rather than an assertion failure.
In case it's relevant, I'm working on Oracle Solaris 10 1/13 s10x_u11wos_24a X86.

You mentioned in the other answer that you are testing with Boost 1.55. Are you testing this in C++11 mode?
Today I downloaded Boost 1.55 and did the following:
In both tools/build/v2/engine/build.sh and tools/build/v2/tools/sun.jam globally replace SUNWspro with SolarisStudio12.4-beta_jul14-solaris-x86
In tools/build/v2/tools/sun.jam replace:
feature.extend stdlib : sun-stlport ;
feature.compose <stdlib>sun-stlport
    : <cxxflags>-library=stlport4 <linkflags>-library=stlport4
with:
feature.extend stdlib : sun-stlport ;
feature.compose <stdlib>sun-stlport
    : <cxxflags>-std=c++11 <linkflags>-std=c++11
Note: This is just the quick way I found to con the Boost build system into using C++11 instead of STLport. The feature in the jam file still has stlport in its name, but that's only a name and the code is being built in C++11 mode.
In boost/math/special_functions/detail/lanczos_sse2.hpp change line 15 from:
#if defined(__GNUC__) || defined(__PGI)
to:
#if defined(__GNUC__) || defined(__PGI) || defined(__SUNPRO_CC)
Run:
./bootstrap.sh --without-libraries=context --without-libraries=coroutine --without-libraries=graph_parallel --without-libraries=log --without-libraries=mpi --without-libraries=python --without-libraries=test --without-icu
Run:
./b2 -j4 --layout=versioned --disable-icu address-model=64 threading=multi optimization=speed inlining=full
At this point the vast majority of the code builds, but does not link.
There are 3 problems:
The compilation problem with tuple that you've already fixed
A linker problem with finding std::string related symbols - maybe also related to the gcc header upgrade and now fixed?
Numerous compilation problems caused by boost/archive/detail/register_archive.hpp
For this last one the code in the #ifdef __SUNPRO_CC section of boost/archive/detail/register_archive.hpp does appear to be invalid, and leads to the errors:
"./boost/archive/detail/register_archive.hpp", line 45: Error: The function "adjust_counter" must have a prototype.
"./boost/archive/detail/register_archive.hpp", line 46: Error: Expression must have a constant value.
"./boost/archive/detail/register_archive.hpp", line 47: Error: Expression must have a constant value.
"./boost/archive/detail/register_archive.hpp", line 48: Error: An integer constant expression is required within the array subscript operator.
Even with Boost 1.55, attempts to fix this lead to the same ccfe assertion. Trying to use the #else part of the code as I described in the original post does, as does moving the line:
char adjust_counter(counter<0>);
so that it comes before the place where adjust_counter is used also then leads to the same assertion:
>> Assertion:   (../lnk/funcsym.cc, line 1679)
It's as though any change to boost/archive/detail/register_archive.hpp that fixes the basic code ordering issue lets ccfe get far enough to cause the assertion.
If there is somebody in your team looking at whether Boost 1.55 compiles with Solaris Studio 12.4 in C++11 mode then hopefully they can relate to what I'm seeing here. One key point is that they'll have had to edit the jam files to use C++11 mode.
The other thing is that any insights the person who has been trying to build Boost 1.55 has would be very useful. I know you don't want to get into officially supporting it, but maybe a blog post with any unofficial hints and tips on getting Boost to build in C++11 mode could be a way to share knowledge.

I just purchased Acrobat Pro XI i downloaded the installation file from a different computer because mnes has no internet i click to setup/ install ot says "Acrovat instiller encountered an unexpected failure. please try again. if continues contact dobe

I just purchased Acrobat Pro XI i downloaded the installation file from a different computer because mnes has no internet i click to setup/ install ot says "Acrovat instiller encountered an unexpected failure. please try again. if continues contact dobe support. " how can i install ot to my computer whats going on??

I just purchased Acrobat Pro XI i downloaded the installation file from a different computer because mnes has no internet i click to setup/ install ot says "Acrovat instiller encountered an unexpected failure. please try again. if continues contact dobe support. " how can i install ot to my computer whats going on??

How to get the free space from logical drive for solaris installation?

Hi.. I am using win-xp.In the extended drive I have freed 10gb by deleting one of the logical drives.I wish to know how to proceed for solaris installation in the space available with out disturbing the data in other logical drives.Is there any tool?

Hi,
See: http://www.sun.com/software/solaris/self_help.jsp
At the bottom of that page, FAQ # 3
HTH,
John

AFPPRN received a return code of failure from the OSD routine FDUPRN

Hi all,
Operting system : Solaris 9
Oracle application: 11.5.10
i would like to ask query related to buffer area of pinter on solaris server.
we are trying to print cheques using oracle application on network printer.
some times it is printing the cheques with out any problem but sometimes it throws and error message in concurrent request log file.
****************** L O G F I L E C O N T E N T S ***************
Printing output file.
Request ID : 849798
Number of copies : 1
Printer : radch1
Pasta: Error: Error reading input file for type checking.
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. An error occurred while AOL tried to spawn the print process
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. An error occurred while AOL tried to spawn the print process.
Action: Review your concurrent request log file for more detailed information.
Finished executing request completion options.
Concurrent request completed
Current system time is 20-AUG-2009 11:49:18
****************** L O G F I L E C O N T E N T S ***************
my question is
1) Do we need to delete any temporary files from server related to printer.
Regards

Hi,
What is the status of those concurrent requests (Completed with Warning or with Error)?
1) Do we need to delete any temporary files from server related to printer.Usually, you do not need to delete any files manually, temp files will be created by the application, and there should no issues with the files permissions (unless you have some other instance running on the same node with different applmgr user). However, you can safely clean (.t and .tmp) files as per the following documents.
Note: 435437.1 - Most Common Solutions to FRM-41839 and .tmp Files Not Being Deleted
Note: 145487.1 - Files Types .t and .temp and .tmp, are Saving Under /var/tmp
Note: 162232.1 - Why Does Oracle Forms Create .TMP Files Which Fill Up The Filesystem e.g. /tmp ?
I would also suggest you search Metalink for APP-FND-00500 and you will get many hits, go through the documents and see if it helps.
Regards,
Hussein

Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...

Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support

Installation Failure: Windows failed to install the following update with error 0x800F0922

Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!

Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil

Windows 8 installation failure with German language pack

Hi,
I have a Lenovo ThinkPad Edge E330 with Windows 8. We just received it over Xmas - nice product. Just one Thing so far: I can't get the German language pack installed. Language, Keyboard layout and other regional Settings are set to German. After downloading the German language pack through Language->German->options->Download and Install Language pack (German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP])I always run into the following error during the Installation (download seems to be fine, error happens after about 2/3 of the Installation - if you believe the Progress bar). From the Event Viewer:
Installation Failure: Windows failed to install the following update with error 0x80070002: German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP].
I already tried quite some stuff without success: no pending Upgrades, several reboots, switching off Firewall/anti-Virus, selective reboot just with Winodws Services and Startup stuff, ... No success.
Does anybody have seen a similar Problem? Anybody with a solution to get the German language pack finally installed?
Thanks in advance for your Support,
Ingo
Event-Details:
System
Provider
[ Name]
Microsoft-Windows-WindowsUpdateClient
[ Guid]
{945A8954-C147-4ACD-923F-40C45405A658}
EventID
20
Version
1
Level
2
Task
1
Opcode
13
Keywords
0x8000000000000028
TimeCreated
[ SystemTime]
2012-12-28T10:06:26.588367000Z
EventRecordID
2032
Correlation
Execution
[ ProcessID]
388
[ ThreadID]
2640
Channel
System
Computer
Lenovo-PC
Security
[ UserID]
S-1-5-18
EventData
errorCode
0x80070002
updateTitle
German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP]
updateGuid
{B9991A98-7903-4A91-B17A-818B1C1D9633}
updateRevisionNumber
200
serviceGuid
{9482F4B4-E343-43B6-B170-9A65BC822C77}

Hi SOL
For more information , please find the below download link.
http://software.cisco.com/download/release.html?mdfid=282806052&release=8.6.6&relind=AVAILABLE&flowid=221&softwareid=282774363&rellifecycle=&reltype=latest
Thank you
please rate all useful information

No Disk meet the criteria for Solaris installation

Hi all, I have a problem when trying to install Solaris 8 (Intel) on my PC. There are some funny things happened while installing the OS.
1.) My motherboard does not support booting from CD-ROM, so I downloaded a Device Assistant Boot Disk to boot it up. Then I use dd.exe to make the boot disk from the image, I have tried many times that after creating the boot disk, this boot disk will contain 512 bytes of bad sector. So why?
2.) After using this boot disk to boot up and install the OS, before entering to the detection of the bus type stuff (still on the white screen), at the bottom of the screen, it says "ata_command select failed ... ...", what does this mean?
3.) When the system go back to the white screen with language selection, I choose English (which is 1), and the system try to find my hard disk, but it failed and says "No Disk meet the criteria for Solaris installation" with a new line saying "installation documenation found.". So what is happening?
Appreciate for any help.
Wallace

Did you check that your adaptec scsi controller is
supported by solaris and/or has a working driver
(from sun or adaptec) ?
Here's the HCL for solaris 8 x86:
http://soldc.sun.com/support/drivers/hcl/8/401/BOOK.htm

Adobe Camera Raw 6.7 Installation Failure

From Adobe Bridge CS5, I enter Help, then Updates.
Adobe Application Manager informs me that I can update Adobe Camera Raw to 6.7.
I click to install, the software is downloaded tha I get an Installation Failure message.
When I click on 'Customer Support' on the screen, I am directed to 'http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html'.
At no point during the installation was I asked for the serial number.
Regards
Mike

Please confirm your ACR version from Help->About Plugin->Camera Raw and provide us with the following logs.
You can find them at:
ACR Installer logs
For Mac:
Library\Logs\Adobe\Installer
For Win:
Program Files(x86)\Common Files\Adobe\Installers
AAM logs
For Mac:
/Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
For Win:
C:\Users\<username>\AppData\Local\Adobe\AAMUpdater
You can zip all the files together and send us through mail. This would help us in finding the root cause.
Appreciate your help. Apologize for the inconvenience.
Regards,
Ashutosh
[email protected]

Acrobat X pro installation failure

I always have had problem with Acrobat installation.
Last time it make me completely reinstalled Windows before I can successfully installed Acrobat. However, recently my Win 8.1 pro has had problem so I decided to reinstall Windows from scratch. Again, I encountered Acrobat installation failure.
Here are the error messages:
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
----------- Payload: {4FAB339E-2132-434F-9376-9CD735E4C69C} Adobe Flash CS6 12.0.0.0 -----------
ERROR: DR012: Setting Registry Value Failed. Error 5 Access is denied.(Seq 151)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
Infact, the Creative Suite is the very few first applications I installed after Windows set up.
Any clues on why this happens. I'm tired of reinstalling Windows again and again. But Acrobat is important for me.

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

Solaris 10 installation failure from cd's

Similar Messages

Maybe you are looking for