Solaris 10 installation to Sunfire 280R ( HELP ME )
I am Windows, RedHat, and Alpha user but not the SUN.
Really really brand new userFor the SUN. I want to start to use Java.
I am installing the Solaris10 to my USED Sunfire 280R.
I am downloading the Solaris 10 from the SUN web site and buning the DVD. When I boot my system, it is not boot from the DVD, then it is stop at
Fire280r console login :
then I don't know how to do it.
Anyone know how to log in? or Sun has a default password and user name?
Help me please.
THanks in advance.
Kevin
I did the STOP and type boot dvdrom, then reboot the system.
But it can not install and stop in prompt.
boot: can not open dvdrom
if I type .install
boot: can not open .install
what should i do for that?
Thanks in advance.
Similar Messages
-
Installing Solaris 8 on a SunFire 280R
The SunFire 280R has 11 external disks. Disk 11 has Solaris 9 installed.
In attempting to install Solaris on another disk, the following message appears at the command "boot cdrom" command:
krtld: load_exec: fail to expand cpu/$CPU
krtld: error during initial load/link phase
panic-boot: exit to 64 returned from client program.
Program terminated.
Do you have any ideas on how to solve this?
Is Solaris 8 (1/01) unable to installed on a 64-bit machine?
Objective: I'm trying ot have both Solaris 8 and Solaris 9 on the same processor.
Thanks for your insights.Hello,
I just wanted to point you to the Sun System Handbook page for the F280R, but to my surprise the note is lacking from the current <b>public/free</b> version !!!
This is a quote from the <b>Quick Facts</b> of a formerly public SSH
<table border="0" align="center" width="90%" cellpadding="3" cellspacing="1"><tr><td class="SmallText"><b>Quote:</b></td></tr><tr><td class="quote">
Solaris 8 1/01requires specific patch installations. See 816-1712 for details.
Solaris 8 10/01 is the minimum OS for 900MHz Cu modules.
</td></tr></table>
<b>READ ME: Important Patch Installation Required Sun Blade 1000 Sun Enterprise 280R</b> is available from docs.sun.com.
The Blade 1000 and the Sun Fire 280R use the same systemboard, but a Enterprise 280R doesn't exist.
Either get Solaris 8 7/01 or Solaris 8 10/01 (for 900Mhz Cu) or a more current version of Solaris 8.
If you have a service contract, you can notify Sun (ssh-feedback@sun.com) about this omission. It's your time and money you have spent when you got stuck ...
Michael -
Problem adding IBMtape and TS3200 fibre library to solaris 10 sunfire 280R
Hi,
I have IBM TS3200 Fibre library and I’m having problems to connect it to my solaris 10 (and TSM) there is nothing in under /dev/rmt ??
Information:
SunOS tsm 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Fire-280R
HBA Model : QLA2310
Driver Version : qlc-20080514-2.28
FCode Version : 1.14.09
Firmware Version : 3.03.27 IP
There are 2 drivers and one changer and bout are seen by hardware:
cfgadm -o show_FCP_dev -al
Ap_Id Type Receptacle Occupant Condition
c3 fc-fabric connected configured unknown
c3::2002000e11116daf,0 tape connected configured unknown
c3::2002000e11116daf,1 med-changer connected configured unknown
c3::2008000e11116daf,0 tape connected configured unknown
c3::500601603a201211,0 disk connected configured unknown
c3::500601603a201211,1 disk connected configured unknown
c4 fc-private connected configured unknown
c4::210000203784c0ff,0 disk connected configured unknown
c4::210000203784dff0,0 disk connected configured unknown
I have installed the IBMtape as in IBM documentation is instructed.
All commended out in st.conf, mt.conf and lb.conf.
st driver is not loadet. (rem_drv st)
there is in /devices entrys like this: (du -a /devices)
2 /devices/pci@8,700000/SUNW,qlc@2/fp@0,0/sgen@w2002000e11116daf,1
0 /devices/pci@8,700000/SUNW,qlc@2/fp@0,0/sgen@w2002000e11116daf,1:changer
What is sgen@??
So the hardware sees the library but the os dos not compute… any idea how to get the drivers working and something under /dev/rmt?You could experiment with giving OBP the absolute path to that USB device, but I doubt you'll be successful. The Sunfire 280R (same hardware as the Sunblade 1000, Sunblade 2000, and Netra 20) design expected USB to be only for keyboard and mouse, not for any storage devices. If booting ever works manually from a USB stick, then you could create a custom alias for the device.
Try an experiment by using a CD or DVD of an older release of Solaris 10 instead of the current release.
[http://www.sun.com/software/solaris/releases.jsp|http://www.sun.com/software/solaris/releases.jsp]
The earlier ones need fewer hardware resources. I also recall a few forum posts that seem to suggest the bootblock structure on the CD's and DVD's of those earlier releases was more compatible with older hardware.
You might also need to get yourself a copy of the OBP 4.x Command Reference Manual, document No. 816-1177
[http://dlc.sun.com/pdf/816-1177-10/816-1177-10.pdf|http://dlc.sun.com/pdf/816-1177-10/816-1177-10.pdf] -
How to connect a SunFire 280R to an HP EVA8000 San.
Hello experts,
I'm trying to connect a Sunfire 280R to an eva8000, I've installed the fibra cards and I've done a probe-scsi-all and I can see all the cards
a san :-
ok probe-scsi-all
/pci@8,600000/SUNW,qlc@4
LiD HA LUN --- Port WWN --- ----- Disk description -----
0 0 0 21000004cf780993 SEAGATE ST336605FSUN36G 0438
1 1 0 21000011c62d4362 SEAGATE ST336607FSUN36G 0307
/pci@8,700000/SUNW,qlc@3
************************* Fabric Attached Devices ************************
Adapter portId - 330500
Device PortId 330100 DeviceId 0 WWPN 50001fe150061f0d
Lun 0 HP HSV210 5030
Lun 1 DISK HP HSV210 5030
Device PortId 330101 DeviceId 1 WWPN 50001fe150061f0f
Lun 0 HP HSV210 5030
Lun 1 DISK HP HSV210 5030
Device PortId 330102 DeviceId 2 WWPN 50001fe150061f09
Lun 0 HP HSV210 5030
Lun 1 DISK HP HSV210 5030
Device PortId 330103 DeviceId 3 WWPN 50001fe150061f0b
Lun 0 HP HSV210 5030
Lun 1 DISK HP HSV210 5030
/pci@8,700000/scsi@6,1
/pci@8,700000/scsi@6
Target 6
Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M14011009
I then downloaded the Sun StorEdge SAN Foundation Software I tried to install it but it just stops with status code 8. See output :-
./install_it
Logfile /var/tmp/install_it_Sun_StorEdge_SAN.log : restarted on Monday February 19 14:33:39 GMT 2007
This routine installs the packages and patches that
make up Sun StorEdge SAN.
Would you like to continue with the installation?
[y,n,?] y
Verifying system...
Checking for incompatiable SAN patches
xargs: Child killed with signal 13
Begin installation of SAN software
Installing StorEdge SAN packages -
Package SUNWsan : Installed Previously.
Package SUNWcfpl : Installed Previously.
Package SUNWcfplx : Installed Previously.
Package SUNWcfclr : Installed Previously.
Package SUNWcfcl : Installed Previously.
Package SUNWcfclx : Installed Previously.
Package SUNWfchbr : Installed Previously.
Package SUNWfchba : Installed Previously.
Package SUNWfchbx : Installed Previously.
Package SUNWfcsm : Installed Previously.
Package SUNWfcsmx : Installed Previously.
Package SUNWmdiu : Installed Previously.
Package SUNWjfca : Installed Previously.
Package SUNWjfcax : Installed Previously.
Package SUNWjfcau : Installed Previously.
Package SUNWjfcaux : Installed Previously.
Package SUNWemlxs : Installed Previously.
Package SUNWemlxsx : Installed Previously.
Package SUNWemlxu : Installed Previously.
Package SUNWemlxux : Installed Previously.
StorEdge SAN packages installation completed.
Begin patch installation
Patch 111847-08 : install_it: Patchadd failed with a status of 8
Could any one point me in the right direction I am new to san configuring I done it once before but it was just a case of going through a series of notes, Thanks for all your help (I will answer all question tommorrow as i' m off for the reset of the day)
ThanksTaken from sunsolve, maybe useful for you.
Installing StorEdge SAN patches -
patch 114475-01 : Installed Successfully
patch 113767-02 : Installed Successfully
patch 113766-02 : Installed Successfully
patch 111847-07 : Installed Successfully
patch 114877-01 : install_it: Patchadd failed with a status of 8
This software failed to completly install.
It may not be safe for the system to remain in this undetermined state.
Would you like to rollback your changes ? [y,n,?]
Resolution: Top
Normally, this is the recommended action. But if the patch
that fails to install is 114877-xx or 114878-xx, then a
rollback may not be necessary.
Both 114877-xx (Solaris 8) and 114878-xx (Solaris 9) patches the following
packages: SUNWjfca, SUNWjfcax, SUNWjfcau, and SUNWjfcaux.
The packages and patches are drivers for the JNI 2GB PCI Single FC Network
Adapter and JNI 2GB PCI Dual FC Network Adapter fibre-channel that have
Sun StorEdge SAN 4.x Foundation Suite compatible FCODE.
If server does not have this type of host bus adapter, then SUNWjfca,
SUNWjfcax, SUNWjfcau, and SUNWjfcaux packages are not installed on
the system. The patch will fail to install causing install_it script
to prompt for a rollback.
For this specific situation, it is okay to respond no to the rollback
and let install_it script proceed to completion as the patch is not
required.
Would you like to rollback your changes ? [y,n,?] n
regards -
Solaris 8 Installation on Intel - PROBLEM
Hi,
I am trying to load Solaris 8 on Intel machine , 810 motherboard , 128MB SDRAM , 20GB HDD
but whenever I try to load with CD-1 I have a problem like Webstart Installation 3.00 start and when he ask me language , after that message comes no hardisk foung and it stop immediately at # prompt.
Whenevr I start with CD-2 , he ask me for Interactive / Jump Start , I choose Interactive , it start laoding KERNAL and machine automatically reboot , again reinstall , at that same point machine reboot.
Tell me what to do , I cant go ahead , I want to load Solaris 8 , and see ..
HELP MEEEEEEEEEEEEE.
Regards,
Mahen.I think the problem source is the BIOS ACPI Power Manager, many of motherboards ACPI always let the system auto-reboot during loaded the OS kernel.
I had tried to install Windows2000 and Solaris8 10/01 on Intel 810 MB, the system always rebooted again and again, I suppose that may be some bugs on 810 chipset !!
Try to reconfigure the BIOS ACPI function, such disable it.
But, I'm not sure that is work for your case..... -
Solaris 8 installation problem on an Intel base PC
I'm quite new with Solaris. I got stuck in Solaris 8 installation just at almost the very beginning. After booting up the system from floppy and conituing pressing F2 and selecting booting from CD, I got an error message like:
cannot mount on pci@0; 0/pci-ide@7; 1/ide01/sd@0; 0:a
panic[cpu0]thread=FEC17440 vfs:mountroot
then, the system reboots itself again and again every time it reaches this point. I guess it's a problem with my CD-ROM. But the problem persists even if I change CD-ROM or move CD-ROM from secondary master to primary slave, etc. I also tried to change harddisk, but did no good to the problem. Is there any experienced users who could provide me with some solutions?
I'm using a system with: Pentium 133, 32 MB Ram, 4GB HDD, 3C905TX, ATI Rage II PCI, Matshita CR-587 CD-ROM, Serial mouse and so on. I also tried another system with: P III 450, Asus P3BF, 192MB Ram, Pioneer DVD-ROM, same HDD, and so on. The problem was still there with the latter system. However, I successfully installed Solaris 7 with the latter system before. Why can't it work with Solaris 8?
Thanks a lot for the help.I've been having the exact same problems on a PowerEdge 500SC. I have managed to get Solaris up and running on the machine, however. I booted the DCA from the floppy disk and installed from the CD-ROM. When the DCA is ready to scan for devices I use the "Specific Scan" option to tell it to look for specific devices. I tell it to scan for all devices in the listing and in doing so the DCA finds ISA-based IDE controllers. After it provides a listing of the devices it found I use the "Device Tasks" option and the "View/Edit Devices" menu item then delete the Bus Mastering IDE controller device. Once the screen comes up to ask for a boot device, the drives will show up as on the ISA controllers.
I have to go through this process every time I boot the machine but I am able to make the system run at least.
I haven't figured out the ACPI problem, yet.
Regards,
Doug -
Hardware Requirement for Solaris 8 Installation
Hi,
Can anyone give me the hardware requirements for Solaris 8 Installation. I need to install the following patches too..
C++Runtime 108434-12
Linker 109147-21
J2SE Solaris8 (patch cluster)
SUNWxwfnt (X Window System platform fonts)
SUNWilof (ISO-8859-1 (Latin-1) fonts)
Please help.
Regards
AparnaCheck out http://docs.sun.com/app/docs/doc/806-1054 for the HCL for the intel version of Solaris 8.
or http://docs.sun.com/app/docs/doc/806-2221-10 for Sparc hardware. -
Solaris 9 Installer Tarantella 3.42.947
My company is still installing and using Tarantella 3.42.947 and we are migrating from Solaris 8 to Solaris 9. The installer for Solaris 8 will not work on Solaris 9. Is there someone who can send me or direct me to a place where I can get a copy of the Solaris 9 installer for this oldver version of Tarantella?
Thanks,
ScottWe are unable to help with your question as this forum is only for Sun Update Connection issues.
You may be able to find what you're looking for at http://www.tarantella.com/, but if not please try one of the other forums. -
SunFire 280R 33/66 or 66?
I have found the following information on the SunFire 280R stating the PCI solot one is 33/66:
PCI Slot 1 /pci@8,600000/pci@1,* 33/66mhz-32/64bit-3.3V from ( Solaris[TM]: Matrix of Recognized Device Paths, http://sunsolve.sun.com/handbook_pub/Systems/Example/documen ts/21216.html )
However,Chapter 2 fot the "Servicing the Main Logic Board and Components" document ( http://docs.sun.com/source/806-4807-10/board5.htm#1976610 ) states the following ( 66 only )... Note - PCI slot 1 is reserved for high-speed (66-MHz) cards. Installing a low-speed (33-MHz) card into PCI slot 1 will affect FC-AL performance. Do not install a low-speed card into PCI slot 1.
So which is it? 33/66 or just 66 Mhz?Fibre Channel disk controller. FC-AL is Fibre Channel Arbitrated Loop, a networking technology that supports IP or SCSI at Gigabit or higher speeds.
http://www.t11.org/index.htm
So basically the 280R, V480/490 and V880/890 systems have a disk controller that uses FC-AL to transport SCSI protocol to the disks. FC-AL is a type of loop network, dare I say, similar in theory to token ring networking technology. Fibre Channel is an enterprise class technology mainly used to build storage area networks. SANs offer a more scalable solution for storage compared to the limitations of direct attached SCSI storage. Higher throughput can be obtained as well, currently Sun offers 400MB/s on a single channel HBA. The highest throughput possible with the 280R is 100MB/s to 200MB/s. I have never tried to configure the 280R onboard controller to 200MB/s ( not sure if it is even possible, perhaps using the HSSDC interface attached to a switch?? ), but with a X6799A installed in PCI slot 1, 200MB/s is possible. -
[Solaris 10] Installation problem on nForce4 Ultra - SATA II - raid 0
hi,
Like I was read on HW web page, Solaris 10 should work fine with 'nForce4' (without 'Ultra'),
but on mine mainboard (nForce4 Ultra) instalator was unable to found my array.
I have ASUS A8N-E (nForce4 Ultra) with 2x 250GB Seagate on SATA II RAID 0.
Is it posible to install this OS on 'nForce4 Ultra' or maybe I am doing sth wrong ?Hi, I have the similiar problems on Solaris 10 installation.
I have a Compaq SR1710 AMD Sempron™ + 1GB RAM. I am trying make it a mini workstation.
However, the installation was never able to throught.
It always stop or freeze on the "dos" screen after I select "interactive" installation.
The last error message I got was something "Skipped rtls01" something.
I am trying to install Solaris 9 now, so far on disc 2.
Very smooth. No problem..
hope someone can give me advise on how to install version 10 on the machine.
BTW, I checked teh HCL. It seems ok, given my machine is very basic. -
Not able to add driver update during Solaris 10 installation on IBM x3550
I am facing a problem with installation of Solaris 10 on IBM x3550.
My question is not specific to IBM server.
I am trying to add SAS driver during Solaris 10 installation. I selected option "Apply device driver update" (option # 4). It is asking to insert driver disk. But only showing floppy (f) and cdrom (c).
IBM server 3550 doesnt have floppy drive and I have the driver image only in a USB stick. Unfortunately, Solaris 10 installation is not showing usb device during driver installation.
Is there any way we can add usb device to the driver update disk list??
Thanks in advance.Does no one have an idea?
-
I am trying to install Kodak printer ESP C310 but it says a firewall is blocking the installation. Can you help?I am using windows XP. I have searched port 5353 and this is enabling Bonjour.
You could check this article, but it is about Firefox itself not having access.
: http://kb.mozillazine.org/Firewalls
Could you provide the exact wording and punctuation of the message, and try Googling that yourself -- when you google leave out unimportant words and punctuations, group words that are still together as in original message within quotes or with hyphens so that google will look for those words together in that order. -
while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Solaris 8 installation in Dell 8100 met "Resource Confilict"
Hello There,
During I installated Solaris 8 in Dell Dimension 8100, I received the warning message:
"Resource Conflict: both devices are added.
NON-ACPI device:PNP0c01
Port 800-8DF, C00-C7F; Memory FFB00000-FFFFFFFF
ACPI device:PNP0C01
Memory: 9FC00-9FFFF, 3f87000-7F86FFF, FFFB0000-FFBFFFFF, FFC00000-FFFFFFFF."
How can I recovery this "CONFLICT".
Thanks very much !!!
JackAFAIK, this is a warning and can be ignored. But on dell
systems there a lot of other problems that can prevent
a successful solaris 8 installation (dell keyboard problems,
problems with a panic when the system include a 3com
3c905c NIC, ACPI problems, ...).
See also:
http://groups.yahoo.com/group/solarisonintel/message/26542
Does it crash/reboot when you continue?
Try to boot from the "Software 1 of 2" CDROM and at the
"1 interactive or 2 custom jumpstart" prompt type "b kadb -v"
instead of "1" or "2". In case it crashes while booting the
solaris kernel from cdrom, this should give some usable
error message... -
Hi all,
I am trying to install Xcode 3.2.5 & Xcode 4.2 in iMac (Mac OS X 10.6.8) , I am getting error message as "Installation Failed". somebody can help me. Thanks in advance.I too have the same error while installing xcode 4.2 in Mac os x 10.6.8.
Can any one solve this issue.
Maybe you are looking for
-
Inventory cube 0IC_C03 ,Stock on particular date
Hi All, We are trying to get the stock on a particular date using cube 0IC_C03 ,but we are unable to get the total stock on a given date. 1)Ex: I want stock on 01.12.2009 ,but in the query output I am getting null values. I am only getting the
-
How do I add a recurring event to repeat on the fifth recurring day of the month, for example, an event that only happen on the fifth Sunday of the month for those months that have a fifth Sunday?
-
[SOLVED] tray icons in i3
Hi! I just installed i3 and I'm happy, I customized my i3bar with conky.. and I noticed, that I don't have tray icons. I tried stalonetray, but I would like have it integrated with my main bar. There are my current config files, there is screenshot i
-
Pre Build Model in APO for food company
Hi, I am working in SNP environment using SNP optimizer to schedule 18 months plan for me. However i am not able to get the desired results from the optimize. I am not able to get the desired results due to following reasons : Capacity constraints Se
-
I am not sure how to establish a face time connection via email. What email address do I need use for getting connected? Please help.