Solaris 10 is crashing after installation
I installed solaris 10 in my amd based system with 512 mb ram. After installation it booted poping up the grub menu...after that...
It showed something like....rougly
syncing file systems....[1] [1] [1]................ done (not all i/o completed)
dumping kernel compreesion ratio 2:1 succeded
rebooting...
its rebooting everytime
later i tried single user mode....i wasnt succesfful for 1st 3 attempts..then later i was successful...but again when i tried it isnt..
now i tried inserting my dvd again......booted from it....same error "syncing file systems..done"...am not getting the isntallation menu either...
Please help me friends
Hello,
I have done some further investigation on my problem.
I found out, that the problem is caused by the Microsoft SQL Server 2005 that comes with the
Microsoft Visual Studio installation.
Has anyone experienced the same problem or give me some advice how to fix that ?
Thanks in advance.
Regards,
Elmar
Similar Messages
-
Acrobat x pro crash after installation and running it, exit code 16,
Acrobat x pro crash after installation exit code 16
I installed Adobe acrobat X pro 10.0 trial and every time after installation and running the software it give me the following error message
Please uninstall and re install the product, if the problem still occurs contact Adobe etc….
Error code shutdown 16
I’m using window 7 ultimate 32-bit service Pack 1.
I uninstalled also the adobe reader but with no hope,
If anyone can support me with this issue I will be grateful.Please check the solution provided under the below articles and check if that helps. Few users have resolved their issues by following it.
http://forums.adobe.com/message/4648705
Also, try running the below Microsoft fixit and check if that works.
http://go.microsoft.com/?linkid=9708107
If still same issue, follow "http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html"
[Moved the discussion to Acrobat Installation & Update Issues Forum] -
Safari keeps crashing after installation of mountain lion and with all updates installed
safari keeps crashing after installing mountain lion 10.8.2 even after installing all updates help please
Download the Safari 6.0.2 update > http://swcdn.apple.com/content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg
-
Adobe Air Application Crash After installation
Hi,
We have developed a windows application "DsNetHTML5Player" in Adobe Air which shows HTML pages in sequence using <mx:HTML> control. When I run application in "Flash Builder" all plays fine.After creating its build and installing on system (Windows 7) application crashes with following error.
Faulting application name: DsNetHTML5Player.exe, version: 0.0.0.0, time stamp: 0x4d7a7dd2
Faulting module name: WebKit.dll, version: 6531.9.0.0, time stamp: 0x50fcd627
Exception code: 0xc0000005
Fault offset: 0x000a99ac
Faulting process id: 0x19c0
Faulting application start time: 0x01d00ae266bc2b46
Faulting application path: C:\Program Files\DsNetHTML5Player\DsNetHTML5Player.exe
Faulting module path: c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\WebKit.dll
Report Id: 99882a24-76d6-11e4-a3ad-005056c00008
If anyone has any idea what the problem could be here, please let me know.
Thanks
UmairCould you open a new bug report on this over at bugbase.adobe.com. Please include a copy of your app (or a sample project) along with steps to reproduce. Once added, please let me know the bug number and I'll have somone take a look ASAP.
Thanks,
Chris -
G5 crashes after installation of Crucial RAM
I recently upgraded my RAM from its original 512 MB to 2G with modules from Crucial. The first pair I received did not work when installed together although they appeared to work individually in each slot separately. I sent them back to Crucial and they sent me another "build." Installed the second pair and the computer worked fine for 10 days. Now the fan surges, applications and the system crash continually making the machine very frustrating to work with. Genius at the Apple store said it's one of the following: bad RAM, failing HD or failing motherboard (I did not take the machine in to the store for examination). I've run the disk utilities from the start up disk successfully and repaired minor issues on the HD. Are my next steps to go back and test each memory module in each slot, one by one, to see what happens? If it's a problem with the RAM, why did it work fine for 10 days and then start causing problems? I hate to revert to 512 MB RAM but the crashing 2 GB is making me nuts! Are there any better suppliers of RAM than Crucial? Any insight would be appreciated.
I finally gave up on the Crucial RAM and put the original equipment 512 MG module back in. Now that doesn't work in either slot. The machine will not even start up with the 512 MG RAM in. I took the 512 MG out, put one Crucial 1 GB module back in. Sometimes the machine starts up, sometimes it doesn't. If it does start, it's incredibly unstable and will crash retrieving mail in Mail or starting up Firefox.
What has happened to my G5 now? Why will it not run with its original chip? Have I somehow damaged the RAM slots by putting in/taking out RAM? (I've been so careful.) I've been without my computer now for over a week and have no other ideas how to troubleshoot. Do I have to spend many $$ at the Apple store to fix this 6 year old machine? Any suggestions would be appreciated. I've used Apple computers for 20 years and have never been afraid of my machine before. Now my hands are tied and I can't use it. -
Hey gang. Here's the scenario. I have installed a 3rd internal hard drive to my Power Mac G4 AGP series Mac. It is running off a new Sonnet Tempo Serial ATA controller card. After a lot trouble just trying to get Leopard to "see" the new drive as an option to install it on, it FINALLY has! I had to install some older firmware from Sonnet that helped to do so. SO, it installed Leopard onto my new Seagate 500gig drive but when it says to reboot to continue, it starts rebooting and then just suddenly shuts completely down...like a complete failure or something. I re-installed and still the same thing. Any thoughts?
you guys have helped me get this far, hopefully we can finally break through to the other side!! Allllmost there! : )Well, it seems that the main problem was with the firmware from the new Sonnet PCI controller card. After talking to a rep, they said many PowerMac G4 users had better luck with Leopard using the an older version of firmware. 5.1.3 instead of 5.3.1. But before I found all that out I had cloned the partition that was running my current OSX (10.3.9) to the new Seagate 500gig drive in hopes that I would be able to install Leopard after doing so but it wasn't until installing the older firmware that I was able to actually install Leopard onto the drive. The problem was that it was crashing after installation when I would reboot. I wiped the "clone" off of the new Seagate, re-initialized the drive and it worked fine after that! So apparently, something did not like the cloning even though it "installation was successful". Don't know if that helps but I hope so. thanks again for all of your help!
-
How to Add a Physical Interface After Installation in Solaris 10
How to Add a Physical Interface After Installation in Solaris 10
Hi Java Specialist,
I am trying to setup a network interface with the following steps on a new fresh Solaris 10 installation using the instruction titled How to Add a Physical Interface After Installation in Solaris 10 3/05 ONLY from http://docs.oracle.com/cd/E19253-01/816-4554/esxhb/index.html:
1. # ifconfig lo0 plumb up
2. # ifconfig lo0 10.56.8.101 netmask 255.255.240.0. This was the working Windows DHCP environment prior to installing Solaris
10 on top of it.
3. # Added saturn to /etc/hostname.lo0.
4. # Added 10.56.8.101 to /etc/inet/hosts
5. # Added 10.56.0.0 255.255.240.0 to /etc/inet/netmasks
6.# reboot
However, the following errors kept recurring:
svcs –xv …. unable to qualify my own domain name,
failed with exit status 69.
Any idea on what other steps have I missed? I was hoping to only do step 3 – 6 for the change to apply permanently.
Many thanks,
JackHi Java Specialist,... in a Solaris forum?
1. # ifconfig lo0 plumb upThe loopback connection (your lo0)is NOT a physical interface. There are no hardware components for it. Nor can I think of any reason why it should ever be anything other than the default 127.0.0.1
Use your favorite Internet search site (such as Google, Bing, Yahoo) to learn more about it.
2. # ifconfig lo0 10.56.8.101 netmask 255.255.240.0. This was the working Windows DHCP environment ...I have no idea how a nonexistent software construct gets a DHCP address in a MS Operating System, unless you are confusing this with the "Microsoft Loopback Adapter" which is an utterly different concept. Again, go see what Google tells you.
<br>
<br>
<br>
... completely unrelated to configuring an IP...
unable to qualify my own domain nameAgain, search the Internet or even search these forums with that string of words.
Go back through your two most recent posts and read the responses again.
They seem to both be on the same topic as this new one -- configuring an IP on something.
How to initialize new IP address on secondary interface permanently
How to change IP address permanently on Solaris 10
When you've done all that, then come back and tell us what you are actually trying to do. -
Windows 7 crashed after Creative Suite 6 Design and Web Premium completed an update. The only Windows restore point that worked was pre-installation of CS6 software. Now when trying to reinstall I get the 'installer failed to initialize' message. Have tried using the CC Cleaner Tool but nothing works? Any solution please. Was new computer and newly purchased CS6 software downloaded 2 days prior to the upgrade.
make sure you follow all the steps here, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-
Everything keeps freezing/crashing after Mavericks installation on MacBook Pro
Everything keeps freezing/crashing after Mavericks installation on MacBook Pro.
It started with Photoshop, then Safari, and now the Kinect sensor.
Mavericks is the worse thing that happened to me I have a thesis project to work on!
What can I do?
How can I remove Mavericks and go back to Mountain Lion?
ThanksHey StephSassine,
First, I would run through these steps:
Your computer’s startup disk may not have enough free disk space. To make disk space available, you can move files to another disk and then delete files you no longer need on the startup disk:
Increase disk space
http://support.apple.com/kb/PH10677
If that doesn't work, you may need to repair your computer’s disk in Disk Utility:
Choose Apple menu > Software Update to make sure you have the latest version of Mac OS X.
Software updates sometimes change a file’s permissions to improve security, so updating your software can solve some permissions problems.
Open Disk Utility, in the Utilities folder in Launchpad.
Select the disk you want to check.
Click First Aid.
Click Repair Disk Permissions to test and repair permissions.
via: Disk Utility 12.x: Repair disk permissions
http://support.apple.com/kb/PH5821
If that doesn't help resolve the issue, you can revert to a previous OS X version:
OS X Mavericks: Revert to a previous OS X version
http://support.apple.com/kb/PH14176
Sincerely,
Delgadoh -
Yosemite won't install, always crash after two minutes of installation.
My hard drive only got two months, and Mavericks always work fine. I got a Macbook Pro I7 with 8gb ram and 1gb of hard drive. Yosemite installation always crash after one or two minutes.And said scripts cannot save in the .OSInstallSandboxPathfolder, 'because there's a file with the same name.
Any ideas?Hello rialebR,
Thanks for using Apple Support Communities.
From your post it looks like perhaps the installer file did not download properly. I'd like you to please delete the current installer from your launchpad, and then download the installer again from the Mac App Store.
Enter Launchpad.
Click and hold on an icon until you see all icons jiggle.
Click the "x" button in the upper-left of the Mac App Store app icon you want to delete.
Note: If you do not see an "x" button, either the app is not from the Mac App Store or you are logged in as a standard user.
Click "Delete" in the confirmation dialog to delete the app.
OS X Lion: How to remove Mac App Store apps that appear in Launchpad
Mac App Store
Open Mac App Store.
Click Purchases at the top of the window. Your purchased apps will appear.
Click Install or Download.
Download past purchases
Take care,
Alex H. -
My computer crashed after an attempt to upgrade to Yosemite. I can't quit the installer and my MacBook keeps on restarting
I Have a 2008 Macbook Pro 15". It was running issue free until I upgraded to Yosemite. Now my logic board is fried and apple will not fix it. It started with mail accounts unable to send mail, just had to delete accounts and re- install to fix that. But, at the same time as the download, I started intermittently getting a green tint over the screen along with a snowy static like an old TV set. Fearing that my download was corrupt, I re- installed Yosemite over-writing the previous version . The green haze kept coming and going, but I also started getting strobe style white flashes in boxes in the 4 corners of my monitor. I had to do power button forced shutdowns because of pointer and keyboard function failure. Apple Genius desk told me it appeared to be a logic board failure but my computer was too old for them to work onand referred me to a Mac Specialist Center. I was told by both places that Apple installed defective logic boards back then due to changing solder formula. They extended product warranty by adding 1 yr but that still expired in 2012. I tried to post a warning on Mac Forums twice about Yosemite being a poison pill to certain platforms and my posts were pulled. The second attempt was responded to in my personal email account stating that if I don't stop posting derogatory comments, I will be blocked from forum. I am just trying to insert warnings in posts where I can. They haven't discovered that yet. Spread the word!
-
Solaris 11 - after installation there is no remote desktop avaliable
Hi All,
I have the problem that after installation of Solaris Express on SPARC machine there is no available remote desktop. I am using Xmanager to connect to my server.
It works fine with Solaris 9 and 10.
Do you know what is the problem?
Thanks,
DanielI was installing Solaris Exrepss using JumpStart server running on Solaris 10. Solaris Express installed successfuly.
But there was no XServer running.
So I was enabling some services.
During the enabling services error message appers:
Jun 8 18:44:33 sun1 gdm[295]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
Jun 8 18:44:39 sun1 gdm[390]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
Jun 8 18:44:43 sun1 gdm[541]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
Jun 8 18:44:43 sun1 gdm[294]: Failed to start X server several times in a short time period; disabling display :0
bash-3.00# svcs -a
STATE STIME FMRI
legacy_run 18:44:24 lrc:/etc/rcS_d/S29wrsmcfg
legacy_run 18:44:31 lrc:/etc/rc2_d/S10lu
legacy_run 18:44:31 lrc:/etc/rc2_d/S20sysetup
legacy_run 18:44:31 lrc:/etc/rc2_d/S40llc2
legacy_run 18:44:32 lrc:/etc/rc2_d/S42ncakmod
legacy_run 18:44:32 lrc:/etc/rc2_d/S47pppd
legacy_run 18:44:32 lrc:/etc/rc2_d/S70uucp
legacy_run 18:44:32 lrc:/etc/rc2_d/S72autoinstall
legacy_run 18:44:32 lrc:/etc/rc2_d/S73cachefs_daemon
legacy_run 18:44:33 lrc:/etc/rc2_d/S81dodatadm_udaplt
legacy_run 18:44:33 lrc:/etc/rc2_d/S89PRESERVE
legacy_run 18:44:33 lrc:/etc/rc2_d/S91afbinit
legacy_run 18:44:34 lrc:/etc/rc2_d/S91gfbinit
legacy_run 18:44:34 lrc:/etc/rc2_d/S91ifbinit
legacy_run 18:44:34 lrc:/etc/rc2_d/S91jfbinit
legacy_run 18:44:34 lrc:/etc/rc2_d/S91kfbinit
legacy_run 18:44:35 lrc:/etc/rc2_d/S91zuluinit
legacy_run 18:44:35 lrc:/etc/rc2_d/S94ncalogd
legacy_run 18:44:35 lrc:/etc/rc2_d/S98deallocate
legacy_run 18:44:40 lrc:/etc/rc3_d/S16boot_server
legacy_run 18:44:40 lrc:/etc/rc3_d/S50apache
legacy_run 18:44:41 lrc:/etc/rc3_d/S52imq
legacy_run 18:44:41 lrc:/etc/rc3_d/S80mipagent
legacy_run 18:44:41 lrc:/etc/rc3_d/S84appserv
disabled 18:43:48 svc:/platform/sun4u/mpxio-upgrade:default
disabled 18:43:48 svc:/system/metainit:default
disabled 18:43:48 svc:/network/iscsi_initiator:default
disabled 18:43:48 svc:/network/ipfilter:default
disabled 18:43:48 svc:/network/rpc/keyserv:default
disabled 18:43:48 svc:/network/rpc/nisplus:default
disabled 18:43:48 svc:/network/nis/server:default
disabled 18:43:48 svc:/network/nis/client:default
disabled 18:43:48 svc:/network/dns/client:default
disabled 18:43:48 svc:/network/ldap/client:default
disabled 18:43:48 svc:/network/nfs/status:default
disabled 18:43:48 svc:/network/nfs/nlockmgr:default
disabled 18:43:48 svc:/network/nfs/cbd:default
disabled 18:43:48 svc:/network/nfs/mapid:default
disabled 18:43:48 svc:/network/inetd-upgrade:default
disabled 18:43:49 svc:/network/nfs/client:default
disabled 18:43:49 svc:/application/print/server:default
disabled 18:43:49 svc:/network/ntp:default
disabled 18:43:49 svc:/platform/sun4u/sf880drd:default
disabled 18:43:49 svc:/system/auditd:default
disabled 18:43:49 svc:/system/mdmonitor:default
disabled 18:43:49 svc:/system/metasync:default
disabled 18:43:49 svc:/system/rcap:default
disabled 18:43:49 svc:/network/rarp:default
disabled 18:43:49 svc:/network/dhcp-server:default
disabled 18:43:49 svc:/network/nfs/server:default
disabled 18:43:49 svc:/network/rpc/bootparams:default
disabled 18:43:49 svc:/network/samba:default
disabled 18:43:49 svc:/application/management/seaport:default
disabled 18:43:49 svc:/application/management/snmpdx:default
disabled 18:43:49 svc:/application/management/sma:default
disabled 18:43:49 svc:/application/management/webmin:default
disabled 18:43:50 svc:/application/print/ipp-listener:default
disabled 18:43:50 svc:/network/dns/server:default
disabled 18:43:50 svc:/network/routing/legacy-routing:ipv6
disabled 18:43:50 svc:/network/routing/ndp:default
disabled 18:43:50 svc:/network/routing/rdisc:default
disabled 18:43:50 svc:/network/ipv6-forwarding:default
disabled 18:43:50 svc:/network/routing/legacy-routing:ipv4
disabled 18:43:50 svc:/network/routing/ripng:default
disabled 18:43:50 svc:/network/routing/route:default
disabled 18:43:50 svc:/network/security/krb5kdc:default
disabled 18:43:50 svc:/network/ipv4-forwarding:default
disabled 18:43:50 svc:/network/security/kadmin:default
disabled 18:43:51 svc:/network/security/krb5_prop:default
disabled 18:43:51 svc:/network/nis/passwd:default
disabled 18:43:51 svc:/network/nis/update:default
disabled 18:43:51 svc:/network/nis/xfr:default
disabled 18:43:51 svc:/network/http:apache2
disabled 18:43:51 svc:/network/apocd/udp:default
disabled 18:43:51 svc:/network/slp:default
disabled 18:43:51 svc:/platform/sun4u/sckmd:default
disabled 18:43:51 svc:/platform/sun4u/dscp:default
disabled 18:43:51 svc:/platform/sun4u/dcs:default
disabled 18:43:51 svc:/platform/sun4u/oplhpd:default
disabled 18:43:51 svc:/platform/sun4u/efdaemon:default
disabled 18:43:51 svc:/platform/sun4v/efdaemon:default
disabled 18:43:51 svc:/system/consadm:default
disabled 18:43:51 svc:/system/pools:default
disabled 18:43:51 svc:/system/pools/dynamic:default
disabled 18:43:51 svc:/system/iscsitgt:default
disabled 18:43:51 svc:/system/cvc:default
disabled 18:43:51 svc:/system/sar:default
disabled 18:44:38 svc:/network/swat:default
disabled 18:44:38 svc:/network/nfs/rquota:default
disabled 18:44:38 svc:/network/tname:default
disabled 18:44:38 svc:/network/telnet:default
disabled 18:44:38 svc:/network/uucp:default
disabled 18:44:38 svc:/network/chargen:dgram
disabled 18:44:38 svc:/network/chargen:stream
disabled 18:44:38 svc:/network/daytime:dgram
disabled 18:44:38 svc:/network/daytime:stream
disabled 18:44:38 svc:/network/discard:dgram
disabled 18:44:38 svc:/network/discard:stream
disabled 18:44:38 svc:/network/echo:dgram
disabled 18:44:38 svc:/network/echo:stream
disabled 18:44:38 svc:/network/time:dgram
disabled 18:44:38 svc:/network/time:stream
disabled 18:44:38 svc:/network/comsat:default
disabled 18:44:38 svc:/network/finger:default
disabled 18:44:38 svc:/network/login:eklogin
disabled 18:44:39 svc:/network/rexec:default
disabled 18:44:39 svc:/network/shell:default
disabled 18:44:39 svc:/network/shell:kshell
disabled 18:44:39 svc:/network/talk:default
online 18:43:48 svc:/system/svc/restarter:default
online 18:43:50 svc:/system/installupdates:default
online 18:43:50 svc:/network/loopback:default
online 18:43:51 svc:/milestone/name-services:default
online 18:43:52 svc:/system/filesystem/root:default
online 18:43:54 svc:/network/physical:default
online 18:43:55 svc:/milestone/network:default
online 18:43:55 svc:/system/boot-archive:default
online 18:43:55 svc:/system/scheduler:default
online 18:43:55 svc:/system/identity:node
online 18:43:55 svc:/system/filesystem/usr:default
online 18:43:56 svc:/system/keymap:default
online 18:44:20 svc:/system/device/local:default
online 18:44:20 svc:/system/filesystem/minimal:default
online 18:44:20 svc:/system/cryptosvc:default
online 18:44:20 svc:/system/rmtmpfiles:default
online 18:44:20 svc:/system/identity:domain
online 18:44:20 svc:/system/coreadm:default
online 18:44:20 svc:/system/picl:default
online 18:44:20 svc:/system/sysevent:default
online 18:44:20 svc:/system/device/fc-fabric:default
online 18:44:21 svc:/milestone/devices:default
online 18:44:21 svc:/system/name-service-cache:default
online 18:44:23 svc:/network/initial:default
online 18:44:23 svc:/network/service:default
online 18:44:23 svc:/system/manifest-import:default
online 18:44:24 svc:/milestone/single-user:default
online 18:44:25 svc:/system/power:default
online 18:44:25 svc:/system/filesystem/local:default
online 18:44:25 svc:/system/cron:default
online 18:44:25 svc:/system/sysidtool:net
online 18:44:26 svc:/system/dbus:default
online 18:44:26 svc:/network/shares/group:zfs
online 18:44:27 svc:/network/shares/group:default
online 18:44:27 svc:/network/rpc/bind:default
online 18:44:27 svc:/system/sysidtool:system
online 18:44:27 svc:/milestone/sysconfig:default
online 18:44:27 svc:/system/sac:default
online 18:44:27 svc:/system/filesystem/autofs:default
online 18:44:27 svc:/network/inetd:default
online 18:44:28 svc:/system/utmp:default
online 18:44:28 svc:/system/console-login:default
online 18:44:28 svc:/system/system-log:default
online 18:44:28 svc:/system/dumpadm:default
online 18:44:28 svc:/application/management/wbem:default
online 18:44:28 svc:/system/postrun:default
online 18:44:29 svc:/network/ssh:default
online 18:44:29 svc:/application/graphical-login/gdm:default
online 18:44:29 svc:/application/font/fc-cache:default
online 18:44:30 svc:/network/smtp:sendmail
online 18:44:31 svc:/system/fmd:default
online 18:44:32 svc:/network/routing-setup:default
online 18:44:35 svc:/milestone/multi-user:default
online 18:44:36 svc:/system/intrd:default
online 18:44:36 svc:/application/graphical-login/cde-login:default
online 18:44:36 svc:/application/cde-printinfo:default
online 18:44:38 svc:/system/hal:default
online 18:44:38 svc:/system/filesystem/rmvolmgr:default
online 18:44:39 svc:/network/rpc/gss:default
online 18:44:39 svc:/network/rpc/meta:default
online 18:44:39 svc:/network/rpc/smserver:default
online 18:44:40 svc:/application/x11/xfs:default
online 18:44:40 svc:/network/rpc/ocfserv:default
online 18:44:40 svc:/network/rpc/cde-calendar-manager:default
online 18:44:40 svc:/network/rpc/cde-ttdbserver:tcp
online 18:44:40 svc:/network/rpc/mdcomm:default
online 18:44:40 svc:/network/rpc/metamed:default
online 18:44:40 svc:/network/rpc/metamh:default
online 18:44:40 svc:/network/rpc/rex:default
online 18:44:40 svc:/network/rpc/rstat:default
online 18:44:40 svc:/network/rpc/rusers:default
online 18:44:40 svc:/network/rpc/spray:default
online 18:44:40 svc:/network/rpc/wall:default
online 18:44:40 svc:/network/cde-spc:default
online 18:44:40 svc:/network/security/ktkt_warn:default
online 18:44:40 svc:/network/login:klogin
online 18:44:40 svc:/network/login:rlogin
online 18:44:41 svc:/network/ftp:default
online 18:44:41 svc:/network/rpc-100235_1/rpc_ticotsord:default
online 18:44:41 svc:/milestone/multi-user-server:default
online 18:44:41 svc:/system/zones:default
online 18:44:42 svc:/system/basicreg:default
online 18:45:03 svc:/system/webconsole:console
offline 18:44:30 svc:/application/print/rfc1179:default
Could you please help me to resolve that issue?
Thanks,
Daniel -
System (NT4) Crash after Oracle8i installation
My operating system is Win NT4 with Service pack 6a.
Please note that I have loaded Oracle8i Enterprise Edition SUCCESSFULLY on my machine.
But after installation of Oracle8i My system often crashes and goes into memory dump.
My system configurations are are sufficient enough for loading of Oracle8i Enterprise edition.
Can any one help me out in this.Hi,
i have the same problem. So i have seen when ever the system is under stress, may be other services with more priority get memory and cpu time, by example the index server, oracle services crash. I have the servicepack 6a and the "hotfix" installed too, because for win32k.sys crash. So i had the same problem under service pack 5.
null -
SqlPlus always crash after Oracle Client 8 installation
Hi
I have installed Oracle 9 client to connect to a Oracle 7 server
The connection test seems to be good, but after installation SqlPlus always crash, in the event viewer i can see that sqlplusw.exe generate an error in oracommon9.dll.
Can I connect by ado.net to oracle server without oracle client?
Thanks in advance
GiorgioHi,
In regards of metalink note 207303.1, a client 9i which connect to a version 7 database was never been supported, there are too many known problems without workaround either patches.
Nicolas. -
Problem with solaris 10 08/11 installation on x86 workstation (DELL T5500)
Trying to install solaris 10 08/11 installation on x86 workstation (DELL T5500). Following error message was received after selecting the Oracle Solaris interactive Text (Desktop Session) installation method-
SunOS Release 5.10 Version Generic_147441-01 64-bit
Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.
Configuring devices.
SUNW-MSG-ID: SUNOS-8000-0G, TYPE: Error, VER: 1, SEVERITY: Major
EVENT-TIME: 0x5075a820.0x8f97a90 (0x1693e68979)
PLATFORM: i86pc, CSN: -, HOSTNAME:
SOURCE: SunOS, REV: 5.10 Generic_147441-01
DESC: Errors have been detected that require a reboot to ensure system
integrity. See http://www.sun.com/msg/SUNOS-8000-0G for more information.
AUTO-RESPONSE: Solaris will attempt to save and diagnose the error telemetry
IMPACT: The system will sync files, save a crash dump if needed, and reboot
REC-ACTION: Save the error summary below in case telemetry cannot be saved
panic[cpu0]/thread=fffffe80000b3c60: pcieb-7: PCI(-X) Express Fatal Error. (0x4)
fffffe80000b3bf0 pcieb:pcieb_intr_handler+1ea ()
fffffe80000b3c40 unix:av_dispatch_autovect+78 ()
fffffe80000b3c50 unix:intr_thread+5f ()
syncing file systems... done
ereport.io.pci.fabric ena=1693e6221600001 detector=[ version=0 scheme="dev"
device-path="/pci@19,0/pci8086,3410@9" ] bdf=2048 device_id=3410 vendor_id=
8086 rev_id=22 dev_type=40 pcie_off=90 pcix_off=0 aer_off=100 ecc_ver=0
pci_status=10 pci_command=47 pci_bdg_sec_status=0 pci_bdg_ctrl=3 pcie_status=6
pcie_command=7 pcie_dev_cap=8021 pcie_adv_ctl=5 pcie_ue_status=4020
pcie_ue_mask=100000 pcie_ue_sev=62030 pcie_ue_hdr0=0 pcie_ue_hdr1=0
pcie_ue_hdr2=0 pcie_ue_hdr3=0 pcie_ce_status=0 pcie_ce_mask=0
pcie_ue_tgt_trans=0 pcie_ue_tgt_addr=0 pcie_ue_tgt_bdf=ffff pcie_rp_status=0
pcie_rp_control=0 pcie_adv_rp_status=7c pcie_adv_rp_command=7
pcie_adv_rp_ce_src_id=2048 pcie_adv_rp_ue_src_id=2048 remainder=0 severity=44
skipping system dump - no dump device configured
rebooting...
Any ideas?Sometimes, it's just easier and faster
to just start all over and re-install,
particularly when you have only a fresh install on your system.
This time, do not choose to include all the optional "documentation"
(that's what is held on CD5).
I have never found a reason to ever read that documentation so I stopped installing it.
... or you could download and burn a copy of CD5 and use it when prompted.
Maybe you are looking for
-
Reading global attributes from implementation class
Hi, How to access global attributes of implementation class from getter method of context node class. Thanks in advance, Srinivas.
-
Frequency for random no generation between 0.1 and 1.0
how can i create a array which stores the frequency of each random no i have generated. keep having different type error messages
-
Applet loaded in applets?
hi all, I'm trying a java applet for jre1.0. it is supposed to first paint background color and the words that says loading. then it's supposed to load classes images etc as need in the background -- ideally showing a nice status bar of progress. I'm
-
TS2755 Can we please fix this whole saved messages problem? It's really annoying me.
The messages that are "saved" even though I deleted them for a reason are taking up more space on my phone than anything else I just want this stupid problem to be fixed.
-
Is there a limit to how many TV shows you can add to iTunes
i recently added and entire season and only two episodes show up under TV and the rest are under recently added anyone know how to solve this? i restarted my mac and quit and restarted itunes anyone have any suggestions of how to fix this ? the episo