Solaris 10 issue with CD 2
I am installing solaris 10 on some old SunBlade 100
All is working fine with the first CD then I reach a point where I am asked to insert a the second CD. I put it in and is not recognized but I can mount it in my linux box.
Same for all the other CD.
The only way I can proceed with the installation is.
reboot with the next cd inserted than it works...
I am not to expert with solaris maybe I am missing something stupid...
Thank you!
Here is updated information on this 2GB/855GME issue. Any assistance, solution, or insight is very much appreciated.
We are seeing orders of magnitude (30x) increase in access time in a segment at the top of memory when the memory installed is 2 Gigabytes and booting the Solaris operating system. This segment starts at 0x3E000000 (physical - 32 megabytes from the top) up to the 8 Megabytes 'stolen' by the video (or 24 megabytes). The huge increase in Solaris boot time is because (according to our Sun technical contact) Solaris allocates memory from the top down which means its using the slow memory to boot. The symptoms change if the Internal Graphics Device (IGD) is disabled and a PCI video card is used, OR, if the IGD is set to 'steal' all 32 Megabytes available thus consuming the 'slow memory' area.
We have opened an Intel Quad issue outlining the symptoms above (see Quad text below). They suspect MTRR setup in 'anticipation' of IGD use of the memory. However, dumps of the MTRR's via emulator both with and without the IGD are the same.
Note: other model specific registers, such as the BBL_CR_Dx registers are different with/without IGD, but as they are for accessing L2 cache, don't appear to be pertinent to this problem. This opinion could change with more study.
Similar Messages
-
I m facing a problem with login to solaris 10
at time of login its showing ttymon: tmchild: exec service failed
i m not able to access this machine because of this.
Any one has any solution to this problem?Originally Posted by jerryrpiper
I have several HP/Compaq computers that are P4 2.4 Ghz with 512 meg of ram on the computers. The issue has to do with login. If I have a user that rebooted the computer and another user will login after that user the computer ask for the local workstation user name and password. I have tried this on my Dell computers and Brand new HP computer's and have no problems with them. Has any one come across this type of problem. This only happens on the S-510 and 530 models.
One thought...: Possibly a old Novell client installed on those models... I remember having an issue with users having to open the advanced login options, goto the windows login box. There the previous logged in user name needed to be cleared and login would be transparent again. -
Sun Solaris 10,Upgrade 8 or higher,having issues with VxFS,for Oracle 11gr2
A while ago, we tried doing a prototype upgrade of our main Oracle 10g db to Oracle 11gr2.
The OS on which our Oracle 10g is running is Sun Solaris 10, upgrade 4.
According to Oracle 11gr2 documentation, we need Sun Solaris 10, upgrade 6 or higher for Oracle 11g2.
The filesystem we are using is VxFS, Veritas File System.
According to our system administrator, we had issues , making Sun Solar 10, upgrade 8 , work with the VxFS filesystem.
I was wondering if anybody is running Oracle 11g2 on Sun Solaris 10 upgrade 6 or higher with VxFS file system.
At present, our Oracle db upgrade project is on a hold, because of the above issue. So your help on this , can really help us in figuring out if there is an issue between VxFS filesystem and Sun Solaris 10 OS.
Thanks
AshishHi Ashish,
We are not running Veritas Cluster file system.
We tried moving our Oracle 10g r2 db on ZFS ,before doing the upgrade and performance on ZFS was worst.
ZFS has certain memory parameter setting. If you did not configure that then ZFS will eat your complete system memory.
My system administrator, has gotten a copy of Solaris 10 upgrade 9 and will try that with VxFS.
I was curious to find out if folks are running Oracle 11g on Sun Solaris 10 with VxFS file system and if they had experienced any issue.If you can Install Vxfs on Oracle Soalris 10 U9, then according to me there sholudn't be any limitations for an oracle database.
Recently i installed Oracle database 11.2.0.2 on one of my test server. I have created two databases - one on ZFS and another on ASM.
Refer:
http://appsdbaworkshop.blogspot.com/2010/10/installation-of-11202-on-oracle-solaris.html
We dont have any performance issues. We are testing it for the performance benchmarks on both of the filesystem.
If you can Install Vxfs on Oracle Soalris 10 U9, then according to me there sholudn't be any limitations for an oracle database.
Regards,
X A H E E R -
Issue with installation of Solaris 10 UFS in Ldoms
Hi Guys, I'm trying to install Solaris 10 with UFS but not able to make more than one partition. My vdisk is a slice of physical server hard disk.
When I try to modify the table partition of vdisk, it fails.
I cheeked in documentation and saw that vdisk can only be use for one whole s0 partition. How can I create swap and other partition?
Someone have try to install Solaris 10 UFS in Ldoms with success??Thank a lot Pascal,
I Also use file container and it work fine!! -
Solaris 10 with Qlogic card facing network issue
Dear Community,
I am facing network issue with one of M5000 server
card vender is qlogic and switch is brocarde,
if we reset the port from switch side, it will work for nearly 2 hours. after that ping will stop.
here is the details. and there is no error on messages.
bash-3.2# dladm show-dev
bge0 link: up speed: 1000 Mbps duplex: full
bge1 link: unknown speed: 0 Mbps duplex: unknown
qlge2 link: up speed: 10000 Mbps duplex: full
qlge3 link: unknown speed: 10000 Mbps duplex: half
bash-3.2# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 172.16.200.52 netmask ffffff00 broadcast 172.16.200.255
ether 0:21:28:d6:41:10
qlge2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 172.16.200.51 netmask ffffff00 broadcast 172.16.200.255
ether 0:c0:dd:29:7f:68
port is showing as UP
what is the steps to diaganose this issue.
Network also same physical layer.
card : Qlogic
Switch : Brocade*** moderation ***
Thread locked.
You are already discussing your HBA-to-switch configuration issues in your recent and very active forum thread:
https://community.oracle.com/thread/3687788
Stay there. Keep all information in a single location.
You will get additional responses when people choose to respond. -
Issues with jbdc logging on solaris and windows enviroment
Hi All,
I tried to enable JDBC logging on my app server (tried on Solaris and Windows)and
i am facing issues. It would be great if someone can share their experiences.
SOLARIS ISSUE:
<Mar 12, 2003 8:09:36 PM PST> <Notice> <Management>
<Mar 12, 2003 8:09:52 PM PST> <Notice> <WebLogicServer> <Starting WebLogic Admin
Server "xyz" for domain "abc">
<Mar 12, 2003 8:09:57 PM PST> <Emergency> <Server> <Unable to initialize the server:
'Fatal initialization exception
Throwable: java.lang.NullPointerException
java.lang.NullPointerException
at weblogic.jdbc.common.JDBCService.initLog(JDBCService.java:231)
at weblogic.jdbc.common.JDBCService.initialize(JDBCService.java:57)
at weblogic.t3.srvr.ServerServiceList.initialize(ServerServiceList.java:48)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:492)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:206)
at weblogic.Server.main(Server.java:35)
WINDOWS:
DriverManager.initialize: jdbc.drivers = null
JDBC DriverManager initialized
registerDriver: driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@1bfaff]
DriverManager.getDriver("jdbc:oracle:thin:@172.16.10.150:1521:vtpsr")
trying driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@1bfaff]
getDriver returning driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@1bfaff]
SQLException: SQLState(null) vendor code(17055)
java.sql.SQLException: Invalid character encountered in: failAL32UTF8Conv
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:1130)
at oracle.jdbc.dbaccess.DBConversion.failAL32UTF8Conv(DBConversion.java:2762)
at oracle.jdbc.dbaccess.DBConversion.javaCharsToAL32UTF8Bytes(DBConversion.java:2678)
at oracle.jdbc.dbaccess.DBConversion.stringToAL32UTF8Bytes(DBConversion.java:2624)
at oracle.jdbc.dbaccess.DBConversion.stringToAccessCharBytes(DBConversion.java:391)
at oracle.jdbc.dbaccess.DBConversion.StringToCharBytes(DBConversion.java:456)
at oracle.jdbc.ttc7.O3log.setSessionFields(O3log.java:796)
Thanks,
SureshInfact it is same issue for both environments...
It is
java.sql.SQLException: Invalid character encountered in: failAL32UTF8Conv
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:1130)
at oracle.jdbc.dbaccess.DBConversion.failAL32UTF8Conv(DBConversion.java:2762)
at oracle.jdbc.dbaccess.DBConversion.javaCharsToAL32UTF8Bytes(DBConversion.java:2678)
at oracle.jdbc.dbaccess.DBConversion.stringToAL32UTF8Bytes(DBConversion.java:2624)
at oracle.jdbc.dbaccess.DBConversion.stringToAccessCharBytes(DBConversion.java:391)
at oracle.jdbc.dbaccess.DBConversion.StringToCharBytes(DBConversion.java:456)
at oracle.jdbc.ttc7.O3log.setSessionFields(O3log.java:796)for both enviroments..
Please let me know if any of u guys came across this before.
Thanks,
Suresh
"suresh maram" <[email protected]> wrote:
>
Hi All,
I tried to enable JDBC logging on my app server (tried on Solaris and
Windows)and
i am facing issues. It would be great if someone can share their experiences.
SOLARIS ISSUE:
<Mar 12, 2003 8:09:36 PM PST> <Notice> <Management>
<Mar 12, 2003 8:09:52 PM PST> <Notice> <WebLogicServer> <Starting WebLogic
Admin
Server "xyz" for domain "abc">
<Mar 12, 2003 8:09:57 PM PST> <Emergency> <Server> <Unable to initialize
the server:
'Fatal initialization exception
Throwable: java.lang.NullPointerException
java.lang.NullPointerException
at weblogic.jdbc.common.JDBCService.initLog(JDBCService.java:231)
at weblogic.jdbc.common.JDBCService.initialize(JDBCService.java:57)
at weblogic.t3.srvr.ServerServiceList.initialize(ServerServiceList.java:48)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:492)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:206)
at weblogic.Server.main(Server.java:35)
WINDOWS:
DriverManager.initialize: jdbc.drivers = null
JDBC DriverManager initialized
registerDriver: driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@1bfaff]
DriverManager.getDriver("jdbc:oracle:thin:@172.16.10.150:1521:vtpsr")
trying driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@1bfaff]
getDriver returning driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@1bfaff]
SQLException: SQLState(null) vendor code(17055)
java.sql.SQLException: Invalid character encountered in: failAL32UTF8Conv
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:1130)
at oracle.jdbc.dbaccess.DBConversion.failAL32UTF8Conv(DBConversion.java:2762)
at oracle.jdbc.dbaccess.DBConversion.javaCharsToAL32UTF8Bytes(DBConversion.java:2678)
at oracle.jdbc.dbaccess.DBConversion.stringToAL32UTF8Bytes(DBConversion.java:2624)
at oracle.jdbc.dbaccess.DBConversion.stringToAccessCharBytes(DBConversion.java:391)
at oracle.jdbc.dbaccess.DBConversion.StringToCharBytes(DBConversion.java:456)
at oracle.jdbc.ttc7.O3log.setSessionFields(O3log.java:796)
Thanks,
Suresh -
Issues with logging in to CC and missing features
My team is using CC on corporate environment PCs, Win 7 64bit. Some of the problems we have seen are:
When we buy a new adobe license for a new user our IT department has to install the Creative Cloud desktop manager and software on their PC. They do this by using an admin windows account and the new adobe login. Everything works fine for them, they are able to log in to CC and install the software, When the user logs in with their windows account and try to log in to CC with the same adobe id then they get the common issue with the sync button just turning and never logs them in. In some cases this is fixed by deleting the OOBE folder from the admin local profile allowing the other user to log in to CC but most times the IT has to resolve to rebuilding the PC and starting again.
We also hotdesk in my team.I found that when i work on my laptop or another desktop pc in the team everything is fine but if i have to use a different PC for the day i log in but don't have all the features (I can get the home feed, fonts, etc, but not the app installers)
Another member of my team works fine on that same PC but on a different PC she doesn't have all features. She gets the app installers, but not some of the other features.
It all seems to be a bit random as to who can access what.
Our corporate firewall is open to most Adobe servers, unless there is something we have missed. PCs have Adobe Air 3.1.0.4880.
These issues have been happening for months now and IT have spend hours to resolve.
Anyone else has issues using Creative Cloud in a corporate environment and are there any suggestions we can use please?There isn't any capability for the OpenBootProm prompt
(the OK prompt you might see on your screen)
to ask you for a username or a password.
The OBP is a firmware level of the SPARC platform, not an OS nor a mini-OS.
If you have consoled in through the SF280R's RSC card, it might have its own password prompt, but the OBP itself can't do that. Additionally, the RSC doesn't show you the OK prompt either (certainly not to the extent that the more sophisticated LOM, ALOM, ILOM or System Controllers of other system designs might have.).
You made mention that you eventually see a cursor that is sitting at a prompt that shows:
Happy@solaris11 $If that is what you see, then I think you're already logged into the OS. That would seem to be a C-shell prompt, with you logged into a fully booted system named "solaris11" as username "Happy".
Consequently, I'll be asking that your post be moved out of the Servers'General hardware forum, and into the General Solaris 11 forum. You don't seem to have a hardware issue, but perhaps just an issue with being unfamiliar with Solaris. (You didn't describe your experience level in the initial post.) -
Regarding Sun Java System Application Server Issue with JVM
Regarding Sun Java System Application Server Issue with JVM
Hi
I have installed SJSAS9.1 on solaris system. I m trying to deploy war file which i compiled in windows enviorment by jdk1.5.0_05. Every time i got the following error :
type Exception report
message
descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: PWC6033: Unable to compile class for JSP
PWC6199: Generated servlet error:
[javac] javac: invalid target release: 1.5
[javac] Usage: javac
[javac] where possible options include:
[javac] -g Generate all debugging info
[javac] -g:none Generate no debugging info
[javac] -g:{lines,vars,source} Generate only some debugging info
[javac] -nowarn Generate no warnings
[javac] -verbose Output messages about what the compiler is doing
[javac] -deprecation Output source locations where deprecated APIs are used
[javac] -classpath Specify where to find user class files
[javac] -sourcepath Specify where to find input source files
[javac] -bootclasspath Override location of bootstrap class files
[javac] -extdirs Override location of installed extensions
[javac] -d Specify where to place generated class files
[javac] -encoding Specify character encoding used by source files
[javac] -source Provide source compatibility with specified release
[javac] -target Generate class files for specific VM version
[javac] -help Print a synopsis of standard options
note The full stack traces of the exception and its root causes are available in the Sun Java System Application Server 9.1 logs.
I have cheked jvm version on both system the only difference is :
Solaris points to jdk 1.5.0_09
Windows point to jdk1.5.0_05
Even i tried to run blank jsp also but again i got the same error.
Can any help me to sort out the problem or give me any idea so i can do something by my own.
Thanks in Advance
GaganDo you have ANT installed and available?
Thanks,
Kedar -
Issue with LDAP login authentication in CMC console
We have a existing issues with Business Objects BOE XIR2 SP2 and LDAP authentication with the BOE CMC Console.
We use websphere as the application server and it is installed on the same machine (Solaris) as BOE.
We have this issue on both our production and our recently rebuilt development environment to duplicate the issue.
Both environment have configured LDAP over SSL and we can login to BOE Infoview Reports with LDAP and we can map groups and users if we login to CMC but we can not login to CMC with secLDAP.
The specific error still being shown is "Security plugin error: Failed to set parameters on plugin".
Both environments (DEV and PROD) are fresh installs of BOE XIR2 SP2.
Any ideas are much appreciated
ThankyouThe CMC in XIR2 used com components for the SSL (rather than java like infoview) and I'm betting the WAS deployment is not finding them. Is WAS on a seperate server or is BOE installed there as well?
I'm not familiar with any regular fixes for an issue like this. If no other replies I'd recommend opening a case with either deployment(WAS on "nix") or authentication(WAS on windows) to see if they can trace down the problem.
Regards,
Tim -
Issue with Removing the Patch Set Software 9.2.0.8
Hi experts,
I have issue with removing the patch set software 9.2.0.8
I'm working on solaris box recently ugraded to 9.2.0.8 from 9.2.0.7. however i want to downgrade now. I have followed the document 4547809 mentioned. Now the real issue is when i restored the oracle_home (9.2.0.7) and execute sqlplus /nolog here is error message shown
bash-2.05$ sqlplus /nolog
bash: /oracle/test/920_64/bin/sqlplus: No such file or directory
bash-2.05$ lsnrctl
bash: /oracle/test/920_64/bin/lsnrctl: No such file or directory
Please help
thanks in advanceHi,
Thanks for reply you are right
ls -l /oracle/test/920_64/bin/sqlplus was not exist. However i copied everything from the backup.
I'm trying again
cp -r bk_test_home/* /oracle/test/920_64/*
still i couldn't the file however it exist in bk_test_home. please suggest
Thanks and regards -
Issue with bootadm after mobo upgrade
Hi,
the motherboard of one of our servers died and I decided to take this opportunity to upgrade the server. With the new mobo though, the order of the disks is different. I managed to get the system to boot by recreating the device tree, but I am still having some issues with bootadm.
When I run bootadm list-menu, I get error messages saying that it can't find the menu.lst, which is normal as it looks like it is still searching for the menu.lst at the old location, i.e. /dev/dsk/c0d0s0, when the new location is /dev/dsk/c2d0s0. The weird thing though is that if I run bootadm list-archive, I get no error messages. Any idea what I can do to fix this? I have tried to run bootadm update-archive -f -R, as well as installgrub -m /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c2d0s0, but nothing seems to fix it.
I am running Solaris 5.11 snv_60.
Thanks a lot in advance,
Bertrand.Hi,
the motherboard of one of our servers died and I decided to take this opportunity to upgrade the server. With the new mobo though, the order of the disks is different. I managed to get the system to boot by recreating the device tree, but I am still having some issues with bootadm.
When I run bootadm list-menu, I get error messages saying that it can't find the menu.lst, which is normal as it looks like it is still searching for the menu.lst at the old location, i.e. /dev/dsk/c0d0s0, when the new location is /dev/dsk/c2d0s0. The weird thing though is that if I run bootadm list-archive, I get no error messages. Any idea what I can do to fix this? I have tried to run bootadm update-archive -f -R, as well as installgrub -m /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c2d0s0, but nothing seems to fix it.
I am running Solaris 5.11 snv_60.
Thanks a lot in advance,
Bertrand. -
Issue with java_g and -debug
Is there an issue with the -debug option when running Weblogic 4.51 with
the java_g command.
Each time we include the -debug option we experience
weblogic.common.LicenseCorruptException (s)
The same error is experienced using java 1.1.7 on NT, Solaris(x86)2.7
and Solaris (Sparc)2.7
We are very keen to find out if there is a way of resolving this to
allow us to do remote debugging.
regards
Duncan AlexanderFor some reason, using the custom classloaders in WLS causes unpredictable VM
behavior in those VMs. For instance, you point out the LicenseCorruptError which
occurs due to a io read error which doesn't occur when the same environment is
run in non remote mode.
There are some things you can do.
First of all, use 1.2.2 instead of 1.1.7. That VM appears more stable.
If you have to use 1.1.7 then:
On NT, make sure you've updated to the 1.1.7_005.
On Solaris 2.7, run the server in static mode. (You may also try 1.1.7_008, I
haven't had a chance to check that version yet.)
I don't know about Solaris x86.
The VM problem occurs when using custom classloaders so run the server in static
mode. You won't be able to hot deploy ejbs, but you will be able to remotely
debug.
Debuggers don't work well with custom classloaders anyway, especially on 1.1.7.
Gets a little better on 1.2.2 but there's still holes in the JDI in this area.
To run in static mode don't use weblogic.class.path, everything goes on the
classpath. Make sure that /weblogic/classes/boot appears before
/weblogic/classes.
Also add -Dweblogic.system.disableWeblogicClassPath=true=true if you're using
5.1.0.
Dana Jeffries
BEA Systems
Duncan Alexander wrote:
>
Is there an issue with the -debug option when running Weblogic 4.51 with
the java_g command.
Each time we include the -debug option we experience
weblogic.common.LicenseCorruptException (s)
The same error is experienced using java 1.1.7 on NT, Solaris(x86)2.7
and Solaris (Sparc)2.7
We are very keen to find out if there is a way of resolving this to
allow us to do remote debugging.
regards
Duncan Alexander -
Issue with java_g and -debug (Response would be appreciated this time).
Is there an issue with the -debug option when running Weblogic 4.51 with
the java_g command.
Each time we include the -debug option we experience
weblogic.common.LicenseCorruptException (s)
The same error is experienced using java 1.1.7 on NT, Solaris(x86)2.7
and Solaris (Sparc)2.7
We are very keen to find out if there is a way of resolving this to
allow us to do remote debugging.
regards
Duncan AlexanderFor some reason, using the custom classloaders in WLS causes unpredictable VM
behavior in those VMs. For instance, you point out the LicenseCorruptError which
occurs due to a io read error which doesn't occur when the same environment is
run in non remote mode.
There are some things you can do.
First of all, use 1.2.2 instead of 1.1.7. That VM appears more stable.
If you have to use 1.1.7 then:
On NT, make sure you've updated to the 1.1.7_005.
On Solaris 2.7, run the server in static mode. (You may also try 1.1.7_008, I
haven't had a chance to check that version yet.)
I don't know about Solaris x86.
The VM problem occurs when using custom classloaders so run the server in static
mode. You won't be able to hot deploy ejbs, but you will be able to remotely
debug.
Debuggers don't work well with custom classloaders anyway, especially on 1.1.7.
Gets a little better on 1.2.2 but there's still holes in the JDI in this area.
To run in static mode don't use weblogic.class.path, everything goes on the
classpath. Make sure that /weblogic/classes/boot appears before
/weblogic/classes.
Also add -Dweblogic.system.disableWeblogicClassPath=true=true if you're using
5.1.0.
Dana Jeffries
BEA Systems
Duncan Alexander wrote:
>
Is there an issue with the -debug option when running Weblogic 4.51 with
the java_g command.
Each time we include the -debug option we experience
weblogic.common.LicenseCorruptException (s)
The same error is experienced using java 1.1.7 on NT, Solaris(x86)2.7
and Solaris (Sparc)2.7
We are very keen to find out if there is a way of resolving this to
allow us to do remote debugging.
regards
Duncan Alexander -
Netra T1 105, issue with LOM prompt
Hello all,
I am having issue in accessing OK prompt from LOM menu. When I do the poweron, it sits on LOM event: power on. When I do, console it shows stand by. Please help me out here as I am working on making this server to respond. Thanks.Hi. Could you tell me if patches 108620-04 or higher & 108673-02 or higher are already installed on the Netra t1 105?
*How to determine if the Netra[TM]T1 model 105 server PROM patches are current [ID 1010561.1]*
Description
How to determine if patches 108620-04 or higher & 108673-02 or higher are already installed on the Netra t1 105.
Steps to Follow
These two patches have to do with OBP(OpenBoot PROM) and the user prom.
108620-04 Hardware/PROM: Netra t1 Standalone User PROM Update
108673-02 Hardware/PROM: Netra t1 System PROM Update
108673-02 delivers OBP 3.10.27.
This can be checked via the OBP with the .version command.
OBP Example:
ok .version
Release 3.10.27 ME created 2000/06/22 16:45
OBP 3.10.27 2000/06/22 16:45
POST 1.17.0 2000/03/06 12:18
This can be checked via Solaris[TM] with: prtconf -V
Solaris[TM] Example:
# prtconf -V
OBP 3.10.27 2000/06/22 16:45
If you see Release 3.10.27 you do not need to install this patch.
108620-04 delivers the dropins
These can be checked at the ok prompt with the show-dropins command.
Example:
ok show-dropins
Dropins for Flash device: /pci@1f,0/pci@1,1/ebus@1/flashprom@10,0
Dropin name Size Checksum Date Date Version Vendor
created flashed
OBP 4a1bc cc30 06/22/2000 3.10.27
keyboards bf0 dd75
fonts af6 6b86
obdiag bd34 aec5
pci1002,5654 d34 7190
pci1002,4755 cb0 c382
pci1002,4750 1794 3f65
class060400 44e 17cc
userprom 246 b3ba
pci108e,1001 32a4 d714
pci1011,22 47e 69c9
pci1000,3 2824 feb4
class010100 1210 ce35
i2c 1fe 5a8f
i2c-cs2 1f4 bd2a
nvinit- 172 0 10/08/1999 00/00/0 0.0
POST 45340 519 03/06/2000 1.17.0
PROM size = 100000 bytes Available for Use = 3d958 bytes
Dropins for Flash device: /pci@1f,0/pci@1,1/ebus@1/flashprom@10,400000
Dropin name Size Checksum Date Date Version Vendor
created flashed
ebus-14.400000 b0 9fa6 06/09/1999 06/09/1999 1.0
SUNW,flapjack
probe+ 250 c2b5 01/06/2000 01/06/2000 2.0
SUNW,flapjack
banner- 1aa 6f35 12/10/1999 12/10/1999 1.0
SUNW,flapjack
tty-control 150 a863 12/01/1999 12/01/1999 1.0
SUNW,Flapjack
PROM size = 200000 bytes Available for Use = 1ff984 bytes
Dropins for Flash device: /pci@1f,0/pci@1,1/ebus@1/flashprom@10,800000
Dropin name Size Checksum Date Date Version Vendor
created flashed
PROM size = 200000 bytes Available for Use = 200000 bytes
ok
The part that is of interest is about two thirds of the way down to do
with ebus-14.400000, probe+, banner- and tty-control.
If the Checksum matches you you don't need to install this patch.
On the other hand it won't cause any problems to reinstall both patches. -
Accesing protectred URIs on Solaris (sparcv9) with WLS 10.3.5 and Apache2
I had started to ask questions about this on another thread of mine, but since I had listed that one as answered and this being different from the original question on that thread...I felt it better to create its own thread.
Problem Description: Environment Details:
- Server1 -- 64 bit Intel RHEL5
Fusion Middleware Identity Management - 11.1.1.2
WLS 10.3.2
ODSM,OID,OVD
DB 10.2.0.4
- Server 2 32-bit Intel RHEL5
OAM 10.1.4.3
OHS 11.1.1.2
- Server 3 64-bit SparcV9 Webhost -- deployed app as protected uri
WLS 10.3.5
Apache2
Webgate 10.1.4.3
We believe we have completed everything in regard to being able to include a solaris host in our list of hosts that are tied to OAM. We have installed webhost with XP and RHEL5.6 successfully using OHS 11.1.1.2. This is the first time creating a webhost on Sparc. The webgate was created and software installed, the deployed app protected, etc... Everything that we have done for Linux and XP in the past we have done for this Sparc host. The only differences are the SUN OS, Apache2, and WLS 10.3.5. I believe those are all acceptable for these Oracle products and versions.
When we try to access the Sparc's protected uri... nothing happens. The browser stays blank... the url does not change to display the oamsso login.html (as the other installs do)... nothing is returned... no error, no remarks, ... just a blank browser.
Doing an apachectl -l I receive the following:
Compiled in modules:
core.c
prefork.c
http_core.c
mod_so.c
So mod_so.c is included.
If I go directly to the protected uri through 7001 instead of the 8890 -- the port httpd.conf has configured to listen on -- the page displays. If I open the oamsso/login.html using 8890... it displays. But if I use 8890 to bring up the protected uri... as described above nothing displays.
One other thing, since the Sparc host is "headless" -- as described by our SysAdmin... no access directly through the sun console and no gui access via the sun host since there is no sun console just the server -- we have to access the gui via a browser on the same network. The browser is actually on the OAM host.
From apache2 error_log on SUN host:
15-7-2011 14:35:51Sending message: 0 13
protocol=NAP version=3 oldest=1
15-7-2011 14:35:51Received message: 0 13
protocol=NAP version=3 oldest=1
15-7-2011 14:35:51Sending NMP STS negotiation message: 0 0
sts=open
15-7-2011 14:35:51Received NMP STS negotiation message: 0 0
sts=open
15-7-2011 14:35:51Sending message: 0 14
cm=mtisunfireHost_AG challenge=b516f1a00c2a95ee
15-7-2011 14:35:51Received message: 0 14
cm=access_svrid1 challenge=95520d6315ad3865 st=ma%3d25 rt=1
15-7-2011 14:35:51Sending message: 0 15
response=531be0a851cb2773c90aa0c91d9f779c
15-7-2011 14:35:51Received message: 0 15
response=2b62c22a9458e962c35d8d7d358f4fc1 st=ma%3d25 rt=1
15-7-2011 14:35:51Sending message: 0 8
cm=mtisunfireHost_AG ct=0 version=3
15-7-2011 14:35:51Received message: 0 8
ci=id%3dmtisunfireHost_AG%20maxConnections%3d1%20debug%3d0%20maxSessionTime%3d24%20sleepFor%3d60%20security%3dopen%20failoverThreshold%3d1%20aaaTimeoutThreshold%3d%20cookieSessionTime%3d3600%20maxCacheElems%3d100000%20cacheTimeout%3d1800%20configLastUpdateTime%3d1310754351%20preferredHost%3dmtisunfire:8890%20state%3dEnabled%20primaryCookieDomain%3d%20idleSessionTimeout%3d3600%20accessClientPasswd%3d02434564584046435641510409%20primaryServer1%3dhost%253dirsam-oam.dchc.smil.mil%2520port%253d8887%2520numOfConnections%253d1%20denyOnNotProtected%3d0%20cachePragmaHeader%3dno-cache%20cacheControlHeader%3dno-cache%20ipValidation%3d1 st=ma%3d25%20mi%3d2%20sg%3d32%20sm%3d rt=1
[Fri Jul 15 14:35:52 2011] [notice] child pid 18581 exit signal Segmentation fault (11)
[Fri Jul 15 14:35:58 2011] [notice] child pid 18582 exit signal Segmentation fault (11)
[Fri Jul 15 14:36:01 2011] [notice] child pid 18583 exit signal Segmentation fault (11)
[Fri Jul 15 14:36:04 2011] [notice] child pid 18585 exit signal Segmentation fault (11)
[Fri Jul 15 14:36:07 2011] [notice] child pid 18586 exit signal Segmentation fault (11)
[Fri Jul 15 14:36:11 2011] [notice] child pid 18590 exit signal Segmentation fault (11)
[Fri Jul 15 14:36:12 2011] [notice] child pid 18591 exit signal Segmentation fault (11)
[Fri Jul 15 14:36:14 2011] [notice] child pid 18592 exit signal Segmentation fault (11)
[Fri Jul 15 14:36:15 2011] [notice] child pid 18593 exit signal Segmentation fault (11)
[Fri Jul 15 14:36:16 2011] [notice] child pid 18594 exit signal Segmentation fault (11)
[Fri Jul 15 14:38:35 2011] [notice] child pid 18595 exit signal Segmentation fault (11)
[Fri Jul 15 14:38:38 2011] [notice] child pid 18596 exit signal Segmentation fault (11)
I believe that apache is currently setup correctly at this point, but cannot understand what we are missing.I would say that OAM does support Apache (according to the certified Apache versions and OS's). However, there are so many distributions out there and it can be configured with countless options, be compiled with a number of different compilers, and include any number of modules that some compatibility issues are bound to arise. The Solaris distribution - also Oracle - is a case in point. I have also encountered issues with the Apache version bundled with some Linux versions (for different reasons than the Solaris bundle) for which the easiest solution has also been to download and build from source. I would imagine that is the reason for what you were told about support for generic Apache, though of course I do not know the context.
Regards,
Colin -
Oracle singleton instance issue with OCIStmtFetch()
Hi,
i am folowing a singletom pattern in my VC++ application were only one Oracle instance is created and it is being used through out the application. The OCIStmtFetch() is used twice in the application and when the OCIStmtFetch() is invoked for the second time it returns a OCI_NO_DATA condition. But when i created a new instance of Database use it to invoked the OCIStmtFetch() for the second time it gives a proper result. please can some one help me on why the singleton DBinstance is causing issue with the OCIStmtFetch() for the second time.This forum is about general programming in C, C++, and Fortran, and specifically about using the Oracle Solaris Studio suite of programming tools. Since your question is about using VC++ with Oracle database, you are not likely to get a helpful answer here. (Oracle Solaris Studio is not available on Windows.)
I suggest you try an Oracle database programming forum. Start here:
Database
Maybe you are looking for
-
Files moved to external hard drive - now nothing playing in iTunes...help!
*Hi guys,* *Just wondering if someone can give me some advice really. I think / know I've made a bit of a botch up of my files :-(* *Here's the story - I'll try to be brief...I have done a number of different things to try and sort this mess out and
-
AMD Radeon HD 6470M Not working-on Windows 8.1 Enterprise 64-bit -"Hp Pavilion g6 series "
I am now using Windows 8.1 Enterprise 64-bit .the display drivers are not working good. i cant use properly Adobe Photoshop(CC , CS5..etc). All the "Hp Pavilion g6 series " [Pavilion g6-1201tx]Has the problem. Display Driver .-AMD Radeon HD 6470M i d
-
Prepare EP for ESS(MSS)
Hi, guru! I'm prepare Portal for ESS(MSS)/EP <-> HR/ECC configuration. HR: ECC 6.0 sp14 all packages 600 sp14 EA-HR up to 603 sp10 EP: nw7.0 sp14 for ess/mss deployed in additional: SAPPCCUI_GP 600 SAP ESS 600 SAP MSS 600 BPERP5ESS14 BPERP5MSS14 BPER
-
In autofill, my credit card was password protected and that option and the card numbers are gone!!!!
-
How connect To Moeller Plc Easy 822-dc-tx
i want connect to a Mueller plc (Easy 822-dc-tx) in labview with RS232, please help me !!