Solaris 10 not 'seeing' all processors on e450
When I do a psrinfo I only see 0 1 3
During boot the system says 4 x 296 mhz ultrasparc...
I only see 3 processors when looking into the CDE sun console app. as well.
Is this normal? I did a boot -r but nothing changed.
Thanks
SUNW,Ultra-4
SUNW,builtin-drivers (driver not attached)
SUNW,pll (driver not attached)
SUNW,envctrl, instance #0
dev_path=/pci@1f,4000/ebus@1/SUNW,envctrl@14,600000:envctrl0
SUNW,UltraSPARC-II (driver not attached)
SUNW,UltraSPARC-II (driver not attached)
SUNW,UltraSPARC-II (driver not attached)
SUNW,ifp, instance #0
dev_path=/pci@6,4000/SUNW,ifp@2:devctl
dev_path=/pci@6,4000/SUNW,ifp@2:fc
SUNW,ifp, instance #1
dev_path=/pci@6,4000/SUNW,ifp@3:devctl
dev_path=/pci@6,4000/SUNW,ifp@3:fc
Here is the psrinfo -v
Status of virtual processor 0 as of: 07/11/2005 10:45:27
on-line since 07/11/2005 10:02:27.
The sparcv9 processor operates at 296 MHz,
and has a sparcv9 floating point processor.
Status of virtual processor 1 as of: 07/11/2005 10:45:27
on-line since 07/11/2005 10:02:28.
The sparcv9 processor operates at 296 MHz,
and has a sparcv9 floating point processor.
Status of virtual processor 3 as of: 07/11/2005 10:45:27
on-line since 07/11/2005 10:02:28.
The sparcv9 processor operates at 296 MHz,
and has a sparcv9 floating point processor.
I ran the diagnostic boot and nothing strange came up.
hmmm...
Similar Messages
-
Can not see all the clips in large Icon view in my bin
I arranged my clips in a bin in large Icon view but i can not see all the clips in the bin while in that mode. I see the clips when in list mode or when i drag them out of the bin into the main bin. As soon I drag them back in large icon view bin they do not show up, when going back in list view they are there.
Any idea
Also my daughter accidently pulled the electrical plug, which turned my external hard drive off. So the media was off line. I hit reconnect the clip but the clip does not show as connected in the bin it keeps the Media offline icon but putting the clip in the viewer or time line it plays it. So the clip is reconnected
hope anybody can help with those two issues thanksNick
thanks for your message it helped to show the clips. Here how I solved it. I put the clips i could not see in large Icon view, to the Project folder. Even in the project folder I was only seeing the clips with Thumbnail in list view. When i hit large Icon view the clips disappeared, and they could not have been lower down as i only have about 5 folders in the project. I then clicked arrange the clip by name and they showed up again. Like that i dragged the clip back in to its bin and it showed up. The reason for going back and forth I arranged the clips manually in the bin before and when hitting arrange by name it spread them to far apart and put the clips not in a sequence I liked.
for the second part I followed Neil's suggestion it worked. -
I can not see all "Divisions" in BP Rel.--Partner Function Assignment
Hi,
When I edit "Partner Function Assignment" in BP reliationship such like BUR011("Employee Responsible"),
I can not see all "Divisions" in list which I can see in configuration via SPRO-->Customer Relationship Management->Master Data->Orgnizational Management->Division Setting->Define Divisions.
E.g., in configuration, I can see 7 records of divisions from "001" to "007", but in "Partner Function Assignment" of BP relationship, I can only see "002" to "004".
Do you know why? Thanks a lot!
Best regards,
Longhi
that should not be happening,if they are visible in one client then should be there in another too
do one things try run this
hrbc1_atributes_buffer_update
it will refresh the buffers of your org structure and then you may be able to add this
also check the check box where it is mentioned that"object determination should be permitted"
remember it will run only for once after you run this the check box will be unchecked again
i guess it may solve your probs
also try to structure your org structure index
use t code
crmd_index_om
and withtin the object type give O
and execute
best regards
ashish -
Can not See All of my Music Library on the play list
I accidently moved my music library (My documents/My music/my itunes...)
When I moved it back, iTunes does not see all the song (over 2000). It only see the purchased music. I can use the Add to Library function (In the File menu) and add each song, song by song and I have added a few dozen songs back to the play list. So all the music is there, in the directory, Just can not get iTunes to recogize them.
ANY suggestions to adding the whole library back at once.
Thanks
Dell 4400 Windows XPDo you at least have the little ! (exclamation point) next to the "missing" songs?
I just had the same thing happen to me, but mine occurred simply by upgrading to the latest version of iTunes... in the process it "lost" about half of my music.
I simply unchecked "Keep iTunes Music folder organized" under prefrences/advanced tab.. hit "OK", then went back in and re-checked it, hit OK and iTunes began "organizing" my library and miraculously iTunes found all of the missing music.
There are some decent articles about moving your iTunes library on the support site. They don't always work as advertised, but you're pretty much stuck with My Documents/My Music/iTunes on Windows.
You may be able to reverse things by following those instructions as well. -
I can NOT see all my songs on iPhone5 since activating iTunes Match about a week ago!
ALL songs are available on my iPad3
ALL songs are available on my Win7 computer iTunes
I just did:
Transfer purchases from iPhone and a Music Sync
NOTHING. Tunes and artists are still NOT SHOWING on my iPhone5\
BUYING another copy makes it available on te iPhone, but at double the price
However, some show as PURCHASED, so I can't get another copy on the iPhone
There are MAJOR PROBLEMS with iTUNES MATCH!
This problems is ONLY on the iPhone 5It might take a while (30 minutes or more) for the initial sync to finish.
When it finishes, here's how to see all you desktop bookmarks:
# Press the "Search" button on your Android phone, or tap in the Firefox address bar.
# Press the "Bookmarks" button (with a star icon).
# Tap the "Desktop Bookmarks" folder. -
My iTunes 11.0 (mac) has a black background colour and I can not see all of the information for each song. How do I change the background colour in iTunes 11.0 (mac) so I can see check boxes etc. My download window shows no information, it is entirely black.
Trent o
Someone else in the forum told me how to do this. If you have Onyx on your system then select Parameters, iTunes and turn off high contrast mode. If you don't have Onyx, I'd suggest getting it. It is freeware and used to help maintain your system. Good luck
Paul -
I have paid for an iPad magazine subscription, but I can not see all the pages of the first issue I just got. All I'm getting is the free preview. I contacted the magazine publisher, IPC, who said to contact Itunes, where I do not see an answer.
You can contact iTunes Store Support here.
https://getsupport.apple.com/Issues.action
Click on Purchases, billing and redemption to get started. Are you sure that you actually downloaded the magazine? I have a subscription to one magazine and I choose to download the magazines on my own rather than automatically. -
Hello i needed to install an extension for dreamweaver and for some reason extension manager does not see all my adobe programs. How can i fix that without reinstalling the programs?
Here are my Bridgetalk Diagnostics if it helps:
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 69ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[12:58:04]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 12:58:05
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[12:58:04]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 13:08:04
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 7
Connector = PCD
Installed: 0
Running: 0
fireworks-12.0:
Group = cs
Path = /Applications/Adobe Fireworks CS6/Adobe Fireworks CS6.app
Display Name = Adobe Fireworks CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.Fireworks
Status = (not running)
ExeName = Adobe Fireworks CS6.app
aftereffects-11.0:
Group = cs
Path = /Applications/Adobe After Effects CS6/Adobe After Effects CS6.app
Display Name = Adobe After Effects CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.AfterEffects
Status = (not running)
ExeName = Adobe After Effects CS6.app
audition-5.0:
Group = cs
Path = /Applications/Adobe Audition CS6/Adobe Audition CS6.app
Display Name = Adobe Audition CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.Audition.5.0
Status = (not running)
ExeName = Adobe Audition CS6.app
bridge-5.064:
Group = cs
Path = /Applications/Adobe Bridge CS6/Adobe Bridge CS6.app
Display Name = Bridge CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.bridge5
Status = (not running)
ExeName = Adobe Bridge CS6.app
estoolkit-3.8: PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Display Name = ExtendScript Toolkit CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
Status = PUMPING
Info:
Group = cs
Version = 2.0
Build = ES 4.2.12
Next serial number = 47
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 270ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
ExeName = ExtendScript Toolkit.app
exman-6.0:
Group = cs
Path = /Applications/Adobe Extension Manager CS6/Adobe Extension Manager CS6.app
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.app
switchboard-2.0:
Group = cs
Path = /Library/Application Support/Adobe/SwitchBoard/SwitchBoard.app
Display Name = SwitchBoard 2.0
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
Status = (not running)
ExeName = SwitchBoard.app
Installed: 6
Running: 1
Groups: 119
cs3:
acrobat-8.0
aftereffects-8.0
soundbooth-1.0
bridge-2.0
contribute-4.5
devicecentral-1.0
dreamweaver-9.0
encore-3.0
estoolkit-2.0
fireworks-9.0
flash-9.0
illustrator-13.0
indesign-5.0
indesignserver-5.0
incopy-5.0
photoshop-10.0
premiere-3.0
stockphotos-1.5
audition-3.0
cs4:
acrobat-9.0
aftereffects-9.0
soundbooth-2.0
bridge-3.0
contribute-5.0
devicecentral-2.0
dreamweaver-10.0
encore-4.0
estoolkit-3.0
fireworks-10.0
flash-10.0
illustrator-14.0
indesign-6.0
indesignserver-6.0
incopy-6.0
photoshop-11.*
premierepro-4.0
audition-4.0
ame-1.0
exman-2.0
cs5:
acrobat-9.0
aftereffects-10.0
soundbooth-3.0
bridge-4.0
contribute-6.0
devicecentral-3.0
dreamweaver-11.0
encore-5.0
estoolkit-3.5
fireworks-11.0
flash-11.0
illustrator-15.0
indesign-7.0
indesignserver-7.0
incopy-7.0
photoshop-12.*
premierepro-5.0
audition-5.0
ame-2.0
exman-3.0
flashbuilder-4.0
flashcatalyst-1.0
ts1:
captivate3-en_us
captivate3-fr_fr
captivate3-it_it
captivate3-ja_jp
captivate3-es_es
captivate3-de_de
ts2:
captivate-4.0
el2:
captivate-5.0
as1:
acrobat-10.0
ts3:
robohelp-9.0
framemaker-10.0
cs55:
aftereffects-10.5
audition-4.0
bridge-4.1
contribute-6.1
devicecentral-3.5
dreamweaver-11.5
encore-5.1
estoolkit-3.6
fireworks-11.1
flash-11.5
illustrator-15.1
indesign-7.5
indesignserver-7.5
incopy-7.5
photoshop-55.*
premierepro-5.5
ame-2.5
exman-5.5
flashbuilder-4.5
flashcatalyst-1.5
switchboard-2.0
el25:
captivate-5.5
cs60:
aftereffects-11.0
audition-5.0
bridge-5.*
contribute-6.88
devicecentral-4.0
dreamweaver-12.0
encore-6.0
estoolkit-3.8
fireworks-12.0
flash-12.0
illustrator-16.*
indesign-8.0
indesignserver-8.0
incopy-8.0
photoshop-60.*
premierepro-6.0
ame-6.0
exman-6.0
flashbuilder-4.52
switchboard-2.0
prelude-1.0
speedgrade-6.0
el60:
captivate-60.*
ts4:
robohelp-10.0
framemaker-11.0Same issue. Doesn't see Dreamweaver.
-
How can I set up my contacts so that I do not see all of them on ipad from iCloud?
How can I set up my contacts so that I do not see all of them on ipad from iCloud? I don't need/want to view contact info for casual contacts on the ipad. (I.e. contacts entered so that I can identify a caller for ID/screening purposes)
Also would like to limit email contacts from yahoo- no need to view emails for every "safe list" address.
Thanks!Keyboard shortcut for FullScreen is command + control + F
For more on this:
http://support.apple.com/kb/PH11941 -
I am not seeing all the categories in iBook app.
I am not seeing all the book categories. I am seeing only biography, history, religion and travel categories. Also I think I can see only the free books. Others books do not show up in the search. Do I need to do any settings?
You don't indicate where you are located. That's important because some locations do not yet have paid books.
http://support.apple.com/kb/TS3599
If you cannot get something on iBooks, you need to get other apps like Kindle, Nook, or Googlebooks and try them instead. -
Photoshop CS4 not seeing all RAM on Mac?
I just noticed my Photoshop CS4 is not "seeing" all of the RAM I have installed on my MacPro (2x3Ghz), running Snow Leopard 10.6.1.
My "About This Mac" reports (correctly) that I have 6GB of RAM installed.
However, Photoshop's Preferences > Performance window says there is only "3072 MB" available -- or half what I have installed. I know there is system overhead for the OS, but this is with no other applications running.
I know the Windows version of Photoshop is limited to seeing 2GB RAM because it's 32-bit, but I didn't think that limitation applied to the Mac side.
I've run the memtest application on the Mac, and it doesn't report any physical problems with my chips.
Is there anything else I can check or try to get Photoshop to recognize all 6GB of RAM?
Thanks,
RobbieR. Sinclair wrote:
I know the Windows version of Photoshop is limited to seeing 2GB RAM because it's 32-bit
Surprise... you are running a 32bit app as well. That is why you cannot see more RAM for Photoshop.
(Windows installs a 32- and a 64-bit executable. Mac only installs a 32-bit app) -
Not seeing all my frames in timeline
I am using Mpeg Streamclip to convert my VOB files so that I can edit the movie I made in final Cut Express HD. What is the best conversion to use? And when I have converted recently and imported the conversion into Final cut, I am not seeing all the frames in my timeline. Isnt there supposed to be a frame with a picture of each and every frame on the timeline?
Thank You!
ErikHi Erik.
To see every frame in the timeline:-
1. Click the little arrow to the right of the tiny Timeline Size Graph near the bottom left of the screen.
2. In the window that opens select "Show Video Filmstrip".
3. Hold your finger on the Control Key and hold down the + key.
Your timeline should expand to show every single frame.
Ian. -
Iphoto on MacbookPro not seeing ALL photos on Iphone5S
My Macbook Pro is not seeing all my photos on my I phone 5S so it is not importing all photos. how do i get the MacBook Pro (through I photo) to see all the photos on the I phone?
ThanksTrouble With Syncing Mac Photo Stream to iPhone
-
Adobe Reader does not see all network printers
Hi,
Any help on below would be greatly appreciated
Thank you
Issue:
When printing from Adobe Reader not all network printers appear in the list of printers
All other applications (notepad, word, excel, powerpoint) see all printers and are able to print
Tried:
Drivers: Xerox model specific drivers, universal drivers, global print drivers
Print Processors: Xerox, winprint
Remapped / added printers
Uninstalled/installed printers to print servers
Print servers: Windows Server 2008 R2, Windows Server 2012
Current Environment:
Windows 7 SP1 x64
Windows Server 2008 R2
Adobe:
Version 11.0.06
Full Verison 11.0.06.70
AGM Version 4.28.134
CoolType Version 5.11.135
Core Version 11.6
JP2K Version 2.0.00.32097
Xerox Printers
WorkCentre 4260
Phaser 3600
Phaser 3610
Xerox Drivers
Xerox GPD PCL V3.3.3347.6.0
Xerox GPD PCL6 V3.3.3347.6.0
Print Processor
Winprint.dllI also have this problem that Adobe Reader will not print, but this only occurred for me after installation of MS Office 2010.
The proposed solution of changing default printers does not work for me!
Does anybody have a real explanation as to what causes this problem and a real solution for it?
I have already tried re-installing Adobe Reader 9.3.4 and this had no effect. I am using Windows XP with SP3.
thanks for any help .... -
Can not see all my tracks in environment window
Hello everyone,
i just got a 32 inch lcd screen from a friend and i can not figure out how to see all my tracks?
is there a way to resize the tracks in the enviornment window?
It would be great to be able to see the top tear of my tracks in full as well as the bottom tear of tracks,this screen is certainly large enough.
lolHow much stuff you can fit on the monitor depends on the resolution of the monitor, not the size.
In the inspector you can uncheck some boxes of what is displayed. In the environment it is object specific, not global like in the mixer - so you have to select the channels that you want to hide certain parameters, and each one can be different.
Maybe you are looking for
-
Recently downloaded mavericks to my imac, to update OS X 10.9.2., everything went good except would like to revert to the previous format for mail.....new format does not separate inboxes etc. I hear it can be done, any ideas how to do that?
-
I keep getting a Validation Error when I try to publish my site
I continually update my site and every time I've done it before I just click Publish and it updates all the changes I've made; but now when I click publish it tries to log in to sign in to Business Catalyst for a bit and then I get a Validation Error
-
The person I'm calling can't hear me
When I call or receive calls from my iPad 2, the person on the other end can't hear me talk... ??
-
Error in executing mappings "could not find program unit being called"
I am trying to deploy a mapping from the control center in Oracle WareHouse Builder usign Oracle 11g . Here is what i exactly do , first I generate the mapping it goes okay with an insignificant warning .. After that I right click the mapping and cli
-
Convert Word for Mac 3 documents
Sorry for my borderline inquiry: I am sitting on some older documents written by WORD for Mac 3 (in the early nineties) that I need to open again for my work. MS Word 2004 doesn't, neither does Apple Works or even MacLinkPlus up from version 12. The