Solaris 10 on Sun Ultra 40 --PCI system error on /bus/device/function 0048h

Everytime I boot to Solaris 10 (08/07) I get the following message at the top of my screen:
PCI system error on /bus/device/function 0048h
The system boots up successfully, but I find this error to be particularly annoying. I have no third-party cards plugged into any PCI slot.
Why am I getting this error. Is the BIOS just giving me a bogus error?
Any help would be appreciated.
Thanks.
Robert

Hello,
I even got the same Problem with an Ultra 40. After powering off and on the system during the last 3 days, now i got an error mesage, "CPU3 can not be started"
cleared the CMOS and now i am back on "PCI System Error on Bus/Device/Function 0048h" the system is running with the latest 1.7 Bios update.
First of all I tried to flash the system back to an lower version but the flashsoftware seems not to support this operation have to make own boot media with the flashprogramme and flash by forced the 1.0 or 1.2 version.
regards
Monchichi

Similar Messages

How to install Solaris 10 on sun ultra enterprise 450

I just got a used sun ultra enterprise 450 and need to get a username and password. If I cannot get easily how do I reinstall the OS. What OS can I put on its? I am new to some equipment. It also came with a a storage unit for extra hard drives and how would I use it and set it up also?
It now says type ctrl-d. What do I do?
http://www.unix.com/sun-solaris/114206-how-get-root-password-how-install-sun-os.html
http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-install-solaris-10-on-sun-ultra-enterprise-450-739614/

This same question was cross-posted to another forum site
[http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-install-solaris-10-on-sun-ultra-enterprise-450-739614/|http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-install-solaris-10-on-sun-ultra-enterprise-450-739614/]
with the same unintelligible drivel.
O.P.
Go to Docs.Sun.Com and get the system's documentation. Also go get the OBP 3.x Command Reference manual while you are there. All you questions are answered in that documentation, except for those that are easily found with Google.
[Example of a Google search for your question.|http://www.google.com/#hl=en&q=solaris+root+password&aq=f&oq=&aqi=g9&fp=KxYPMM6r3XA]

Solaris 8 SPARC SUN ULTRA 10 - WP event on CPU0

Hii everyone
My Server SUN 5.8 has rebooted itself after having been generated internally out of the ordinary events related to CPU.
The log en the file.messages and output of prtdiag is:
{color:#ff0000}Apr 15 21:20:10 server1 SUNW,UltraSPARC-IIi: [ID 727863 kern.warning] WARNING: [AFT1] WP event on CPU0, errID 0x000091eb.e4c47547{color}
{color:#ff0000}Apr 15 21:20:10 server1 AFSR 0x00000000.00800040<WP> AFAR 0x000001ff.dbfffdd8{color}
{color:#ff0000}Apr 15 21:20:10 server1 AFSR.PSYND 0x0040(Score 95) AFSR.ETS 0x00 Fault_PC 0x4e3a98{color}
{color:#ff0000}Apr 15 21:20:10 server1 UDBH 0x0000 UDBH.ESYND 0x00 UDBL 0x0000 UDBL.ESYND 0x00{color}
{color:#ff0000}Apr 15 21:20:10 server1 unix: [ID 836849 kern.notice] {color}
{color:#ff0000}Apr 15 21:20:10 server1 ^Mpanic[cpu0]/thread=30001d205a0: {color}
{color:#ff0000}Apr 15 21:20:10 server1 unix: [ID 401469 kern.notice] [AFT1] errID 0x000091eb.e4c47547 WP Error(s){color}
{color:#ff0000}Apr 15 21:20:10 server1 See previous message(s) for details{color}
{color:#ff0000}Apr 15 21:20:10 server1 unix: [ID 100000 kern.notice] {color}
{color:#ff0000}Apr 15 21:20:10 server1 genunix: [ID 723222 kern.notice] 000002a10091d6c0 SUNW,UltraSPARC-IIi:cpu_aflt_log+4e0 (2a10091d77e, 1, 10143958, 2a10091d908, 2a10091d7cb, 10143980){color}
{color:#ff0000}Apr 15 21:20:10 server1 genunix: [ID 179002 kern.notice] %l0-3: 0000000000000001 000002a10091d9e0 0000000000000003 0000000000000010{color}
{color:#ff0000}Apr 15 21:20:10 server1 %l4-7: 0000000000000001 00000000845d5bc0 0000000084407f7c 0000000000000000{color}
{color:#ff0000}Apr 15 21:20:10 server1 genunix: [ID 723222 kern.notice] 000002a10091d910 SUNW,UltraSPARC-IIi:cpu_async_error+7dc (1, 1ffdbfffdd8, 800040, 0, 0, 0){color}
{color:#ff0000}Apr 15 21:20:10 server1 genunix: [ID 179002 kern.notice] %l0-3: 0000000000000000 0640000000800040 0000000000000000 0000000000800040{color}
{color:#ff0000}Apr 15 21:20:10 server1 %l4-7: 000002a10091d9e0 000002a10091dba0 0000000000000000 0000000000000000{color}
{color:#ff0000}Apr 15 21:20:10 server1 unix: [ID 100000 kern.notice]{color}
Apr 15 21:20:10 server1 genunix: [ID 672855 kern.notice] syncing file systems...
Apr 15 21:20:10 server1 genunix: [ID 733762 kern.notice] 6
Apr 15 21:20:11 server1 genunix: [ID 733762 kern.notice] 3
Apr 15 21:20:12 server1 genunix: [ID 904073 kern.notice] done
Apr 15 21:20:13 server1 genunix: [ID 353387 kern.notice] dumping to /dev/dsk/c0t0d0s1, offset 107479040
Apr 15 21:20:24 server1 genunix: [ID 409368 kern.notice] ^M100% done: 13157 pages dumped, compression ratio 3.21,
Apr 15 21:20:24 server1 genunix: [ID 851671 kern.notice] dump succeeded
Apr 15 21:21:08 server1 genunix: [ID 540533 kern.notice] ^MSunOS Release 5.8 Version Generic_108528-09 64-bit
Apr 15 21:21:08 server1 genunix: [ID 913631 kern.notice] Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
Apr 15 21:21:08 server1 genunix: [ID 678236 kern.info] Ethernet address = 0:3:ba:c:c6:5e
Apr 15 21:21:08 server1 unix: [ID 389951 kern.info] mem = 1048576K (0x40000000)
Apr 15 21:21:08 server1 unix: [ID 930857 kern.info] avail mem = 1027547136
Apr 15 21:21:08 server1 rootnex: [ID 466748 kern.info] root nexus = Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz)
Apr 15 21:21:08 server1 rootnex: [ID 349649 kern.info] pcipsy0 at root: UPA 0x1f 0x0
Apr 15 21:21:08 server1 genunix: [ID 936769 kern.info] pcipsy0 is /pci@1f,0
Apr 15 21:21:08 server1 pcipsy: [ID 370704 kern.info] PCI-device: pci@1,1, simba0
Apr 15 21:21:08 server1 genunix: [ID 936769 kern.info] simba0 is /pci@1f,0/pci@1,1
Apr 15 21:21:08 server1 pcipsy: [ID 370704 kern.info] PCI-device: pci@1, simba1
Apr 15 21:21:08 server1 genunix: [ID 936769 kern.info] simba1 is /pci@1f,0/pci@1
Apr 15 21:21:18 server1 simba: [ID 370704 kern.info] PCI-device: ide@3, uata0
Apr 15 21:21:18 server1 genunix: [ID 936769 kern.info] uata0 is /pci@1f,0/pci@1,1/ide@3
Apr 15 21:21:18 server1 uata: [ID 114370 kern.info] dad0 at pci1095,6460
Apr 15 21:21:18 server1 uata: [ID 347839 kern.info] target 0 lun 0
Apr 15 21:21:18 server1 genunix: [ID 936769 kern.info] dad0 is /pci@1f,0/pci@1,1/ide@3/dad@0,0
Apr 15 21:21:19 server1 dada: [ID 365881 kern.info] <ST320414A cyl 39533 alt 2 hd 16 sec 63>
Apr 15 21:21:19 server1 uata: [ID 114370 kern.info] dad1 at pci1095,6460
Apr 15 21:21:19 server1 uata: [ID 347839 kern.info] target 1 lun 0
Apr 15 21:21:19 server1 genunix: [ID 936769 kern.info] dad1 is /pci@1f,0/pci@1,1/ide@3/dad@1,0
Apr 15 21:21:20 server1 dada: [ID 365881 kern.info] <Maxtor 6E040L0 cyl 19156 alt 2 hd 16 sec 255>
Apr 15 21:21:20 server1 swapgeneric: [ID 308332 kern.info] root on /pci@1f,0/pci@1,1/ide@3/disk@0,0:a fstype ufs
Apr 15 21:21:20 server1 simba: [ID 370704 kern.info] PCI-device: ebus@1, ebus0
Apr 15 21:21:20 server1 ebus: [ID 521012 kern.info] power0 at ebus0: offset 14,724000
Apr 15 21:21:20 server1 genunix: [ID 936769 kern.info] power0 is /pci@1f,0/pci@1,1/ebus@1/power@14,724000
Apr 15 21:21:20 server1 ebus: [ID 521012 kern.info] su0 at ebus0: offset 14,3083f8
Apr 15 21:21:20 server1 genunix: [ID 936769 kern.info] su0 is /pci@1f,0/pci@1,1/ebus@1/su@14,3083f8
Apr 15 21:21:20 server1 ebus: [ID 521012 kern.info] su1 at ebus0: offset 14,3062f8
Apr 15 21:21:20 server1 genunix: [ID 936769 kern.info] su1 is /pci@1f,0/pci@1,1/ebus@1/su@14,3062f8
Apr 15 21:21:21 server1 rootnex: [ID 349649 kern.info] ffb0 at root: UPA 0x1e 0x0
Apr 15 21:21:21 server1 genunix: [ID 936769 kern.info] ffb0 is /SUNW,ffb@1e,0
Apr 15 21:21:21 server1 unix: [ID 987524 kern.info] cpu0: SUNW,UltraSPARC-IIi (upaid 0 impl 0x12 ver 0x91 clock 440 MHz)
Apr 15 21:21:21 server1 ebus: [ID 521012 kern.info] se0 at ebus0: offset 14,400000
Apr 15 21:21:21 server1 genunix: [ID 936769 kern.info] se0 is /pci@1f,0/pci@1,1/ebus@1/se@14,400000
Apr 15 21:21:22 server1 hme: [ID 517527 kern.info] SUNW,hme0 : PCI IO 2.0 (Rev Id = c1) Found
Apr 15 21:21:22 server1 simba: [ID 370704 kern.info] PCI-device: network@1,1, hme0
Apr 15 21:21:22 server1 genunix: [ID 936769 kern.info] hme0 is /pci@1f,0/pci@1,1/network@1,1
Apr 15 21:21:25 server1 genunix: [ID 454863 kern.info] dump on /dev/dsk/c0t0d0s1 size 512 MB
Apr 15 21:21:26 server1 hme: [ID 517527 kern.info] SUNW,hme0 : Internal Transceiver Selected.
Apr 15 21:21:26 server1 hme: [ID 517527 kern.info] SUNW,hme0 : Auto-Negotiated 100 Mbps Half-Duplex Link Up
Apr 15 21:22:36 server1 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Apr 15 21:22:36 server1 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Apr 15 21:23:36 server1 named[184]: [ID 295310 daemon.notice] starting. in.named BIND 8.2.2-P5 Wed Jan 15 04:35:48 PST 2003
Apr 15 21:23:36 server1 Generic Patch-5.8-January 2003
Apr 15 21:23:37 server1 named[221]: [ID 295310 daemon.notice] Ready to answer queries.
Apr 15 21:23:37 server1 named[221]: [ID 295310 daemon.warning] check_hints: A records for L.ROOT-SERVERS.NET class 1 do not match hint records
Apr 15 21:23:38 server1 savecore: [ID 570001 auth.error] reboot after panic: [AFT1] errID 0x000091eb.e4c47547 WP Error(s)
Apr 15 21:23:38 server1 See previous message(s) for details
Apr 15 21:23:57 server1 pseudo: [ID 129642 kern.info] pseudo-device: tod0
Apr 15 21:23:57 server1 genunix: [ID 936769 kern.info] tod0 is /pseudo/tod@0
Apr 15 21:23:57 server1 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Apr 15 21:23:57 server1 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Apr 15 21:23:59 server1 pseudo: [ID 129642 kern.info] pseudo-device: vol0
Apr 15 21:23:59 server1 genunix: [ID 936769 kern.info] vol0 is /pseudo/vol@0
Apr 15 21:23:59 server1 scsi: [ID 365881 kern.info] /pci@1f,0/pci@1/scsi@1 (glm0):
Apr 15 21:23:59 server1 Rev. 6 Symbios 53c875 found.
Apr 15 21:23:59 server1 scsi: [ID 365881 kern.info] /pci@1f,0/pci@1/scsi@1 (glm0):
Apr 15 21:23:59 server1 glm0 supports power management.
Apr 15 21:23:59 server1 simba: [ID 370704 kern.info] PCI-device: scsi@1, glm0
Apr 15 21:23:59 server1 genunix: [ID 936769 kern.info] glm0 is /pci@1f,0/pci@1/scsi@1
Apr 15 21:23:59 server1 scsi: [ID 193665 kern.info] sd0 at uata0: target 2 lun 0
Apr 15 21:23:59 server1 genunix: [ID 936769 kern.info] sd0 is /pci@1f,0/pci@1,1/ide@3/sd@2,0
Apr 15 21:24:02 server1 pseudo: [ID 129642 kern.info] pseudo-device: fcode0
Apr 15 21:24:02 server1 genunix: [ID 936769 kern.info] fcode0 is /pseudo/fcode@0
Apr 15 21:24:06 server1 ebus: [ID 521012 kern.info] fd0 at ebus0: offset 14,3023f0
Apr 15 21:24:06 server1 genunix: [ID 936769 kern.info] fd0 is /pci@1f,0/pci@1,1/ebus@1/fdthree@14,3023f0
Apr 15 21:24:26 server1 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Apr 15 21:24:26 server1 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
================================= *{color:#0000ff}DATOS DE DIAGNOSTICO{color}* ============================================
server1 ROOT [9] psrinfo -v
Status of processor 0 as of: 04/16/08 09:45:18
Processor has been on-line since 04/15/08 21:21:20.
The sparcv9 processor operates at 440 MHz,
and has a sparcv9 floating point processor.
server1 ROOT [10]
server1 ROOT [9] uname -a
SunOS server1 5.8 Generic_108528-09 sun4u sparc SUNW,Ultra-5_10
server1 ROOT [19] /usr/platform/sun4u/sbin/prtdiag -v
System Configuration: Sun Microsystems sun4u Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz)
System clock frequency: 110 MHz
Memory size: 1024 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
0 0 0 440 2.0 12 9.1
========================= IO Cards =========================
Bus# Freq
Brd Type MHz Slot Name Model
0 PCI-1 33 1 ebus
0 PCI-1 33 1 network-SUNW,hme
0 PCI-1 33 2 SUNW,m64B ATY,GT-C
0 PCI-1 33 3 ide-pci1095,646.1095.646.3
0 PCI-2 33 1 scsi-glm Symbios,53C875
Bus Freq
Brd Type MHz Slot Name Model
0 UPA 110 30 FFB, Double Buffered SUNW,501-4788
No failures found in System
===========================
========================= HW Revisions =========================
ASIC Revisions:
Cheerio: ebus Rev 1
FFB Hardware Configuration:
Board rev: 2
FBC version: 0x3241906d
DAC: Brooktree 9070, version 1
3DRAM: Mitsubishi 130b, version 2
System PROM revisions:
OBP 3.29.0 2000/12/20 18:45 POST 3.1.0 2000/06/27 13:56
=== *{color:#0000ff}SECOND TEST{color}*
server1 ROOT [4] /usr/platform/`uname -i`/sbin/prtdiag -v
System Configuration: Sun Microsystems sun4u Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz)
System clock frequency: 110 MHz
Memory size: 1024 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
0 0 0 440 2.0 12 9.1
========================= IO Cards =========================
Bus# Freq
Brd Type MHz Slot Name Model
0 PCI-1 33 1 ebus
0 PCI-1 33 1 network-SUNW,hme
0 PCI-1 33 2 SUNW,m64B ATY,GT-C
0 PCI-1 33 3 ide-pci1095,646.1095.646.3
0 PCI-2 33 1 scsi-glm Symbios,53C875
Bus Freq
Brd Type MHz Slot Name Model
0 UPA 110 30 FFB, Double Buffered SUNW,501-4788
No failures found in System
===========================
========================= HW Revisions =========================
ASIC Revisions:
Cheerio: ebus Rev 1
FFB Hardware Configuration:
Board rev: 2
FBC version: 0x3241906d
DAC: Brooktree 9070, version 1
3DRAM: Mitsubishi 130b, version 2
System PROM revisions:
OBP 3.29.0 2000/12/20 18:45 POST 3.1.0 2000/06/27 13:56
============================================
I don't know exactly what is the origin of the problem, How to solver or how to prevent to avoid further problems. This is the first time I have had this Kind of problem on my Server SUN.
I appreciate greatly, any tip o help.
Jimmy

Yup.
EOL in November 2002
Which means EOSL November 2007
http://sunsolve.sun.com/handbook_pub/validateUser.do?target=Systems/U10/U10
Unless you've somehow maintained a service contract on that system,
by specific system serial number,
your best bet is to haunt an online auction site (such as Ebay),
and get a replacement cpu or cpus for shelf stock.
Your current OBP patch level is only down two patch levels,
but your kernel patch level is essentially "never patched".
If it were patched better it may have noticed the issue a lot sooner.
Expect to replace that cpu.

System Error while syncing calendar MfE

I get a system error when the device tries to sync the calendar I did a complete hard reset and re-installed 2.7 and still the same.
Roadsync works fine
Can anyone here me here?
Thanks!
Message Edited by kumarcvn on 09-Oct-2008 07:32 AM

Go back to the 2.5.5. version!
It works fine with Exchange 2007.
No problems any more
You can still download it:
symbian s60 edition 3
http://www.businesssoftware.nokia.com/mail_for_exchange/files/MailForExchange(2.5.5)_S60_3_0.SISX
edition 3 update 1
http://www.businesssoftware.nokia.com/mail_for_exchange/files/MailForExchange(2.5.5)_S60_3_1.SISX
edition 3 update 2
http://www.businesssoftware.nokia.com/mail_for_exchange/files/MailForExchange(2.5.5)_S60_3_2.SISX
Copy/paste the links in browser.
Wouter

Startup - System Error

Today, wehn I switched ON my mobile, it took longer than usual but when it finally loaded it gave this: 'System Error'. The device works fine though. Firstly, somebody help me by explaining what that is and why did it occur. Secondly, how can I correct it?
I own a Nokia E7.
Awaiting replies.

farby wrote:
First, Back-up all your data thru' Nokia Suite...
In case it appears again, perform a Soft reset by dialing *#7370# followed by 12345 (Default code unless set by you).
Please be aware that user data deleted from both C:\ and E:\ by this reset procedure.
Happy to have helped forum with a Support Ratio = 42.5

Unable to install Solaris Sparc 10 on SUN Ultra 10

Downloaded ISO of SPARC 10 DVD from Oracle site, burnt it and tried to install on SUN Ultra 10 (300 MGz / 256 MB RAM / 80 GB IDE HDD)
Followed the process as specified below:
1. Stop+A to stop the current boot process.(Already SPARC 8 is installed)
2. AT OK prompt typed boot cdrom
3. After some time (3-5 min) prompting error
*"boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f File and args:*_
Panic - Kernel : kmem64 allocation failure+_
Program Terminated+_
ok "+_
Checked in few blogs and burnt another DVD with less writing speed, still same error.
Checked with Sparc 8 CD's, Sparc 5.8 installing without any errors.

985393 wrote:
... (300 MGz / 256 MB RAM / ) ...I suggest you forget about trying Solaris 10 on a system with such limited resources.
If I recall correctly, Solaris 10 needs a minimum of 768MB of RAM to install and 1GB or more of RAM to run, even if you had a cpu that was fast enough to run anything.
Perhaps consider it this way:
Would you even dream of trying to install MS Windows 7 on a Pentium-I at 300MHz?
Stay with your Solaris 8. It's from the same late 1990's era as that hardware and fits it just right.

Solaris 2.6 upgrade to version 8 on SUN ULTRA 10

Dear Mr. or Mrs:
I met the same question as uxdms who left the message on Dec 20,2001.
When I was trying to upgrade from solaris 2.6 to 8 release , there is "failed" warning and the upgrade isn't created.
There is a detailed info:
Mechine: SUN ULTRA 10
Media:
Solaris 8 installation -- SPARC Platform Edition
Solaris 8 software 1 of 2 -- SPARC Platform Edition
Solaris 8 software 2 of 2 -- SPARC Platform Edition
Installation step:
Accordidng to the guide of installation, run step by step,
and there are some special steps below:
(1) use the /dev/dsk /c0t0d0s4 as disk slice to upgrade.
(2) selet networked
(3) don't use DHCP
(4) disable IPv6
(5) no NIS+, NIS, DNS ..
.... displaying the wolcome to solaris dialog box
(1) Solaris 8 installation SPARC Platform Edition is ejected.
(2) prompted to insert the Solaris 8 software 1 of 2.
(3)After selecting serial the dialog box of the upgrade..
(4)system prompted upgrading...
initialation is done.
Checking file system is done.
(5) There is a installation summary displayed:
installation summary
The solaris installation status is shown below
product status infor.
Solaris 8 software Failed Detailed(button)
After click the Detailed button, there is a dialog box
Failed:
Log file: /a/var/sadm.system/logs/upgrade_log
Question is:
I can't find the file of upgrade_log , and the webstart install stops on it.
I appreciate for your kind help
Melanie
the webstart install stops on initalization -- with 'failed' warning

Hi,
If this problem is reproduceable, provide me the exact console error (failed) message to further investigate on this issue.
Senthilkumar
Developer Technical Support
Sun Microsystems, Inc.
http://www.sun.com/developers/support

Installation of Solaris on an old Sun Ultra 2

I have acquired an old Sun Ultra 2 and would like to install Solaris on it. One slight problem I have is that there is no floppy or CD drives. The only drive I have attached to the device is a tape drive, and I don't have solaris tape media. Could anyone offer a suggestion as to how I can install Solaris on this machine. Thanks in Advance

Do you have a disk drive inside Sun Ultra 2?.
If yes, you can do a network installation from another system (like
linux or another Solaris box). The Solaris media are available
from Sun web site.
Juan Antonio

Hard disk problem after installing Solaris 10 u5 on a Sun Ultra 24

Hi.
After receiving a new Sun Ultra 24, shipped with Solaris 10 u4, the first thing I did was installing Solaris 10 u5. X wouldn't start but that was not a big problem and installed it in text mode. Installation went fine but, when the system starts, a single beep is heard and after some seconds some warning message appear on the console, before the "Hostname: ..." message, informing that some read operation on my hard disk had timed out and were aborted. The system then starts up normally. The only other anomaly is that the diagnostic partition in unbootable.
I ran the hard disk tests from the tools and drivers CDs and all of the tests were passed. Solaris 10 u4 was working normally so I'm wondering if this may be a bug.
Thanks for your help,
Enrico.

Thanks anyway, I discovered what the problem was: a bug in Solaris 10 u5:
http://opensolaris.org/jive/thread.jspa?threadID=58768&tstart=75
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6536722
Thanks,
Enrico

Wireless PCI for Sun Ultra 24?

Hi
I'm trying to find a wireless PCI card with appropriate drivers for Sun Ultra 24 with Solaris 10 8/07.
Can anyone recommend cards that have been validated with this machine / OS combination?
Help appreciated
Lance

Hello Lance,
have you reviewed the following page ?
Solaris Ready WIFI Products
http://www.sun.com/io_technologies/wifi/WiFi0.html
Michael
Edited by: MAAL on 27.06.2008 07:10
Adding a link didn't work as expected ...

SUN Ultra-2 with Solaris 9 constantly self reboots

The Ultra-2 self reboots several times per day.
It is a kernel problem but I was unable to find a solution, so I hope that someone from this forum will help me.
The uname information is:
SunOS ermis 5.9 Generic_118558-14 sun4u sparc SUNW,Ultra-2
The log information is:
Oct 18 12:41:47 ermis SUNW,UltraSPARC: [ID 110026 kern.warning] WARNING: [AFT1] EDP event on CPU1 Data access at TL=0, errID 0x00000691.0326e08e
Oct 18 12:41:47 ermis AFSR 0x00000000.00400100<EDP> AFAR 0xffffffff.ffffffff
Oct 18 12:41:47 ermis AFSR.PSYND 0x0100(Score 95) AFSR.ETS 0x00 Fault_PC 0xfd6dbf38
Oct 18 12:41:47 ermis UDBH 0x0000 UDBH.ESYND 0x00 UDBL 0x0000 UDBL.ESYND 0x00
Oct 18 12:41:47 ermis SUNW,UltraSPARC: [ID 581146 kern.info] [AFT2] errID 0x00000691.0326e08e No error found in ecache (No fault PA available)
Oct 18 12:41:47 ermis SUNW,UltraSPARC: [ID 542596 kern.info] [AFT3] errID 0x00000691.0326e08e Above Error is in User Mode
Oct 18 12:41:47 ermis and is fatal: will reboot
Oct 18 12:41:47 ermis unix: [ID 855177 kern.warning] WARNING: [AFT1] initiating reboot due to above error in pid 580 (httpd)
Oct 18 12:41:52 ermis pseudo: [ID 129642 kern.info] pseudo-device: tod0
Oct 18 12:41:52 ermis genunix: [ID 936769 kern.info] tod0 is /pseudo/tod@0
Oct 18 12:42:04 ermis syslogd: going down on signal 15
Oct 18 12:42:26 ermis genunix: [ID 672855 kern.notice] syncing file systems...
Oct 18 12:42:26 ermis genunix: [ID 904073 kern.notice] done
Oct 18 12:43:09 ermis genunix: [ID 540533 kern.notice] ^MSunOS Release 5.9 Version Generic_118558-14 32-bit
Oct 18 12:43:09 ermis genunix: [ID 943905 kern.notice] Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Oct 18 12:43:09 ermis Use is subject to license terms.
Oct 18 12:43:09 ermis unix: [ID 349649 kern.info]
Oct 18 12:43:09 ermis NOTICE: 64-bit OS installed, but the 32-bit OS is the default
Oct 18 12:43:09 ermis for the processor(s) on this system.
Oct 18 12:43:09 ermis See boot(1M) for more information.
Oct 18 12:43:09 ermis Booting the 32-bit OS ...
Oct 18 12:43:09 ermis genunix: [ID 678236 kern.info] Ethernet address = 8:0:20:8f:82:a0
Oct 18 12:43:09 ermis unix: [ID 389951 kern.info] mem = 393216K (0x18000000)
Oct 18 12:43:09 ermis unix: [ID 930857 kern.info] avail mem = 381861888
Oct 18 12:43:09 ermis rootnex: [ID 466748 kern.info] root nexus = Sun Ultra 2 UPA/SBus (2 X UltraSPARC 200MHz)
Oct 18 12:43:09 ermis rootnex: [ID 349649 kern.info] sbus0 at root: UPA 0x1f 0x0 ...
Oct 18 12:43:09 ermis genunix: [ID 936769 kern.info] sbus0 is /sbus@1f,0
Oct 18 12:43:09 ermis scsi: [ID 365881 kern.info] /sbus@1f,0/SUNW,fas@e,8800000 (fas0):
Oct 18 12:43:09 ermis rev 2.2 FEPS chip
Oct 18 12:43:09 ermis sbus: [ID 349649 kern.info] fas0 at sbus0: SBus0 slot 0xe offset 0x8800000 and slot 0xe offset 0x8810000 Onboard device sparc9 ipl 4
Oct 18 12:43:09 ermis genunix: [ID 936769 kern.info] fas0 is /sbus@1f,0/SUNW,fas@e,8800000
Oct 18 12:43:09 ermis scsi: [ID 193665 kern.info] sd0 at fas0: target 0 lun 0
Oct 18 12:43:09 ermis genunix: [ID 936769 kern.info] sd0 is /sbus@1f,0/SUNW,fas@e,8800000/sd@0,0
Oct 18 12:43:09 ermis scsi: [ID 193665 kern.info] sd1 at fas0: target 1 lun 0
Oct 18 12:43:09 ermis genunix: [ID 936769 kern.info] sd1 is /sbus@1f,0/SUNW,fas@e,8800000/sd@1,0
Oct 18 12:43:09 ermis scsi: [ID 193665 kern.info] sd3 at fas0: target 3 lun 0
Oct 18 12:43:09 ermis genunix: [ID 936769 kern.info] sd3 is /sbus@1f,0/SUNW,fas@e,8800000/sd@3,0
Oct 18 12:43:09 ermis scsi: [ID 193665 kern.info] sd6 at fas0: target 6 lun 0
Oct 18 12:43:09 ermis genunix: [ID 936769 kern.info] sd6 is /sbus@1f,0/SUNW,fas@e,8800000/sd@6,0
Oct 18 12:43:13 ermis swapgeneric: [ID 308332 kern.info] root on /sbus@1f,0/SUNW,fas@e,8800000/sd@1,0:a fstype ufs
Oct 18 12:43:14 ermis sbus: [ID 349649 kern.info] zs0 at sbus0: SBus0 slot 0xf offset 0x1100000 Onboard device sparc9 ipl 12
Oct 18 12:43:14 ermis genunix: [ID 936769 kern.info] zs0 is /sbus@1f,0/zs@f,1100000
Oct 18 12:43:14 ermis sbus: [ID 349649 kern.info] zs1 at sbus0: SBus0 slot 0xf offset 0x1000000 Onboard device sparc9 ipl 12
Oct 18 12:43:14 ermis genunix: [ID 936769 kern.info] zs1 is /sbus@1f,0/zs@f,1000000
Oct 18 12:43:17 ermis sbus: [ID 349649 kern.info] cgsix0 at sbus0: SBus0 slot 0x1 offset 0x0 SBus level 5 sparc9 ipl 9
Oct 18 12:43:17 ermis genunix: [ID 936769 kern.info] cgsix0 is /sbus@1f,0/cgsix@1,0
Oct 18 12:43:17 ermis cgsix: [ID 260993 kern.info] cgsix0: screen 1152x900, single buffered, 1M mappable, rev 11
Oct 18 12:43:17 ermis unix: [ID 270833 kern.info] cpu0: UltraSPARC (portid 0 impl 0x10 ver 0x40 clock 200 MHz)
Oct 18 12:43:17 ermis unix: [ID 270833 kern.info] cpu1: UltraSPARC (portid 1 impl 0x10 ver 0x40 clock 200 MHz)
Oct 18 12:43:17 ermis unix: [ID 721127 kern.info] cpu 1 initialization complete - online
Oct 18 12:43:22 ermis hme: [ID 517527 kern.info] SUNW,hme0 : Sbus (Rev Id = 22) Found
Oct 18 12:43:22 ermis sbus: [ID 349649 kern.info] hme0 at sbus0: SBus0 slot 0xe offset 0x8c00000 and slot 0xe offset 0x8c02000 and slot 0xe offset 0x8c04000 and slot 0xe offset 0x8c06000 and slot 0xe offset 0x8c07000 Onboard device sparc9 ipl 6
Oct 18 12:43:22 ermis genunix: [ID 936769 kern.info] hme0 is /sbus@1f,0/SUNW,hme@e,8c00000
Oct 18 12:43:24 ermis genunix: [ID 454863 kern.info] dump on /dev/dsk/c0t1d0s1 size 513 MB
Oct 18 12:43:26 ermis hme: [ID 517527 kern.info] SUNW,hme0 : Internal Transceiver Selected.
Oct 18 12:43:26 ermis hme: [ID 517527 kern.info] SUNW,hme0 : 100 Mbps Full-Duplex Link Up
Oct 18 12:43:30 ermis pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Oct 18 12:43:30 ermis genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Oct 18 12:43:30 ermis pseudo: [ID 129642 kern.info] pseudo-device: laner0
Oct 18 12:43:30 ermis genunix: [ID 936769 kern.info] laner0 is /pseudo/laner@0
Oct 18 12:43:43 ermis inetd[189]: [ID 965992 daemon.error] pop/tcp: unknown service
Oct 18 12:43:46 ermis pseudo: [ID 129642 kern.info] pseudo-device: tod0
Oct 18 12:43:46 ermis genunix: [ID 936769 kern.info] tod0 is /pseudo/tod@0
Oct 18 12:43:47 ermis pseudo: [ID 129642 kern.info] pseudo-device: pm0
Oct 18 12:43:47 ermis genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Oct 18 12:43:55 ermis pseudo: [ID 129642 kern.info] pseudo-device: vol0
Oct 18 12:43:55 ermis genunix: [ID 936769 kern.info] vol0 is /pseudo/vol@0
Oct 18 12:44:04 ermis pseudo: [ID 129642 kern.info] pseudo-device: pm0
Oct 18 12:44:04 ermis genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0

Hello,
I don't think it is a kernel problem but a h/ware problem.
CPU 1 reported an ecache (sram) data parity event,
the fault handling code in 5.9 can't do anything about the
error as it is in a page belonging to a user process so it reboots the box.
The no error found in ecache means that either the
fault handling code displaced the error from the cache or there
wasn't one and you had a transient transport error between the
cache and the cpu.
I would engage your h/ware support vendor to work out what h/ware component is broken as these things are quite complex, but the score of 95 would (to a h/ware novice like me) point to cpu 1 being the culprit - but check with an expert.
tim

Parallel port programming for a Sun Ultra 5 running Solaris 8

Hi I'm trying to look for information about reading/writing to the parallel port of a Sun Ultra 5 running Solaris 8. I'd just like to see some basic programs written in C, nothing fancy, just reading and wrting to the port, getting the port address etc. toggling the lines.
I've tried searching for this information and there is plenty of information about PC parallel port programming with windows or Linux. But there seems to be little for Sun's
I've tried doing 'man ecpp' but that doesn't really give any clear example. What I need is an idiots guide.
I've tried searching this Forum and I see that other people have asked the same question before but no one has replied to them. Why is this?
Thanks if you can help.
fishman.

The key is gettting the port into diag mode. Here's a quickly little example that turns all the data pins on and then turns them off:
#include <sys/types.h>
#include <sys/conf.h>
#include <sys/stat.h>
#include <unistd.h>
#include <stropts.h>
#include <fcntl.h>
#include <stdio.h>
#include <sys/ecppio.h>
int fd = 0;
// ecpp structures
ecpp_transfer_parms etp;
ecpp_regs eregs;
// returns -1 if error otherwise returns fd
int openoutput()
fd = open("/dev/ecpp0",O_RDWR);
if (fd==-1) { return -1; }
// default is 90
etp.write_timeout = 10;
// the big secret
etp.mode = ECPP_DIAG_MODE;
ioctl(fd,ECPPIOC_SETPARMS,&etp);
return fd;
unsigned char in()
unsigned char data;
// from the man pages
ioctl(fd,ECPPIOC_GETREGS,&eregs);
data = eregs.dsr;
return data;
void out( unsigned char data )
write(fd,&data,1);
int main( void )
int dummy;
openoutput();
//all data pins on
out( 255 );
scanf("%d", &dummy);
//all data pins off
out( 0 );
scanf("%d", &dummy);
close( fd );
return 0;
}

Sun Ultra 10 with SunStorEDGE A1000/D1000 unable to setup

I realise this covers old ground but I have not been able to trace a uitable resolvement and would be grateful for assistance.
I have a Sun Ultra 10 with 256MB RAM and 440GHz cpu.. It has a pci Adaptec 2944UW HVD SCSI interface card. The storage system is a tray of eight scsi 72GB disks housed in a D1000 case. NetBSD reported it as an A1000 SunStorEDGE at sd0 having 16 targets and 8 luns. However NetBSD did not have a readily available controller to setup the raid system so I installed an alternative. I presume the case is a reused old case housing an A1000 unit.
I tried to format the drives directly but they are not lists as devices such as ct1sd1 etc. and so this is not possible.
I have installed Sun Solaris 10 but could not communicate and reported inability to use rdriver and rdnexus and after reading a number of reports that driver hooks had been removed from the kernel in Solaris 10 I have installed Solaris 9.
On both occasions I installed a number of RAID Manager 6.1.1 control packs, namely SUNWosafw, osar, osau, osamn and vtsse direct from my CD here.
I commanded dr_hotadd.sh to take up the challenge but it failed to communicate.
I added a number of Rdac amendments to rparams in /etc/osa but this did not resolve the issue.
I have tried to call probe-scsi-all after doing a reset-all from the OBP but this fails to report anything. I presume this is because the unit is connected by the interface card rather than a direct scsi disk.
dmesg pipe grep scsi reports:
unknown scsi sd0 at uata0 target 2 lun 0
I would be very grateful fr guidance to resolve this connection so that I can create a suitable filestore.
Thanks
c

blackfoot wrote:
I realise this covers old ground but I have not been able to trace a uitable resolvement and would be grateful for assistance.
I have a Sun Ultra 10 with 256MB RAM and 440GHz cpu.. It has a pci Adaptec 2944UW HVD SCSI interface card. The storage system is a tray of eight scsi 72GB disks housed in a D1000 case. NetBSD reported it as an A1000 SunStorEDGE at sd0 having 16 targets and 8 luns. However NetBSD did not have a readily available controller to setup the raid system so I installed an alternative. I presume the case is a reused old case housing an A1000 unit.If it's really an A1000, you won't have access to the drives. You'll only see exposed LUNS from the raid controller. Do you have a dial in the rear with a scsi address? That will be the address that the A1000 will respond on. In addition, the A1000 has only one pair of SCSI ports. The D1000 has two pair and doesn't have the scsi adress dial (because each of the disks in the chassis respond on their own addresses). Instead you have some DIP switches to change the addressing behavior.
I tried to format the drives directly but they are not lists as devices such as ct1sd1 etc. and so this is not possible.
I have installed Sun Solaris 10 but could not communicate and reported inability to use rdriver and rdnexus and after reading a number of reports that driver hooks had been removed from the kernel in Solaris 10 I have installed Solaris 9.That's fine. You can ignore them. Neither the A1000 nor D1000 require those drivers. You should still be able to use 'rm6' or the CLI tools to interact with an A1000.
On both occasions I installed a number of RAID Manager 6.1.1 control packs, namely SUNWosafw, osar, osau, osamn and vtsse direct from my CD here.
I commanded dr_hotadd.sh to take up the challenge but it failed to communicate.
I added a number of Rdac amendments to rparams in /etc/osa but this did not resolve the issue.
I have tried to call probe-scsi-all after doing a reset-all from the OBP but this fails to report anything. I presume this is because the unit is connected by the interface card rather than a direct scsi disk.If the controller doesn't support the OBP environment, then yes, you won't see anything then.
dmesg pipe grep scsi reports:
unknown scsi sd0 at uata0 target 2 lun 0So that might be a single LUN from an A1000 controller. If the selector switch in the back is set to '2', then it's even more likely.
Darren

No sound output on Solaris 8 and an Ultra 5

I have recently installed Solaris 8 on a Sun Ultra 5 after a few minor problems, everything seems to be working great.
However, I am unable to use any of the system sound notifications under KDE or Gnome. KDE starts the arts sound server just fine without any errors. Audio CD works great but no other audio.
Any suggestions?
Thank you.

Bummer. So you still can't boot OS 9, and get no sound device listed in the OS X Sound Preference Pane? Just checking, did you also press the CUDA reset button after reseating the card? (It's on the side of the motherboard between the PCI card slots and the side, at the rear of the DT case.)
For me, the sound started working again magically after I moved. So, my computer was unplugged for a couple of days and possibly bouncing around in the car a little. Not sure if a loose connection was restored during the move, or being unplugged from the wall power for a few days helped the computer recognize the card again.
Of course there's still the possibility your card is no longer working.

Installation Failures - Sun Ultra 60

Hello. I am having an issue installing Solaris 8, 9, or 10 on a newly acquired Sun Ultra 60.
I am new to Solaris Hardware and SPARC but I have installed the above operating systems on x86 systems before. The installation CDs are also for SPARC.
Here is the problem, when I to boot from the CD-ROM (regardless of operating system version) I get the following messsage:
Boot device: cdrom File and args:
failed to read super block
Boot load failed.
The file just loaded does not appear to be executable.
ok
I am not worried about preserving any data on the hard disks and want a clean install.
Please help!!!!

Thanks for the help. Here is the output from the commands.
Line from "devalias" for the cdrom:
cdrom /pci@1f, 4000/scsi@3/disk@6, 0:f
"probe-scsi-all" output:
Target 0
Unit 0 Disk SEAGATE XXXXXXXXXXXXX
Target 6
Unit 0 Removable Read Only Device TOSHIBA XM6201TASUN32XCD1103

Solaris 10 on Sun Ultra 40 --PCI system error on /bus/device/function 0048h

Similar Messages

Maybe you are looking for