Solaris 10 - patch for new DST 2007 changes

I am trying to track down the one patch I need for the new standard for daylight savings time date changes that took effect in 2007. Each time I get one patch and read the readme file, it tells me I need another patch for the U.S. Energy Policy Act for 2005. I am just about to install Solaris 10 patch 119689-07. I don't need any other patch updates, just the bare minimum new DST patch. Thanks for your help.

119689-07 is obsoleted by 118836. http://sunsolve.sun.com/search/document.do?assetkey=1-21-119689-07-1
118836-36 is latest rev of this patch -- the kernel patch, whic has latest timezone data for the OS
You'll need to make sure java has latest tz data, too:
http://java.sun.com/javase/timezones/
As far as I know, these are the bare minimums for a system to function properly re: latest DST schedule

Similar Messages

Oracle 9i patch for new DST changes

For oracle 9i is there any patch available to take care DST 2007 changes?
How oracle get the current date?
Is oracle depending on Operating System?

Patch is not yet released. You can check the bugs listed in this note in Metalink : Note:359145.1

J2EE upgrade to accommodate DST 2007 changes

Hi,
We are running EP 6.0 SP2P4 on J2EE 6.2. When accommodating DST 2007 changes, we found out as per the note 983147:
The 6.20 J2EE Engine is based on JDK 1.3 and is out of support end of 2006. Therefore no fix will be provided for this JDK version. So all customers running on 6.20 J2EE Engine must switch to higher versions before march 2007.
Thus you have to 1) switch to 6.40 and 2)have jdk version 1.4.2_11 or
higher to have the automatic fix of Daylight savings.
HELP! - If you can provide some pointers to any documentation on how to upgrade this, or if there is any workaround, I would greatly appreciate it.
Thanks!
Nirmal

Hello Nirmal,
Please read the upgrade documentation that you can find in the following path:
http://service.sap.com/instguides -> SAP Netweaver -> SAP Netweaver 2004 (or SAP Netweaver 2004s) -> Upgrade
And about the minimum JDK version to use, you will find information in the SAP Note below:
723909 Java VM settings for J2EE 6.40/7.0
Inside this note you will find the notes for each Operating System. This notes tell you what is the minimum version to use depending on the Operating System used.
Best regards,
Rafael Toshiaki

Daylight savings patch for US - Canada 2007

I see that Apple supposedly patched DST for USA-Canada 2007.
However, I went to a tech article that suggested using a
foo$ zdump -v /etc/localtime | grep 2007
command in terminal.
I got the following which indicates that DST is still the old way:
/etc/localtime Sun Apr 1 09:59:59 2007 UTC = Sun Apr 1 01:59:59 2007 PST isdst=0
/etc/localtime Sun Apr 1 10:00:00 2007 UTC = Sun Apr 1 03:00:00 2007 PDT isdst=1
/etc/localtime Sun Oct 28 08:59:59 2007 UTC = Sun Oct 28 01:59:59 2007 PDT isdst=1
/etc/localtime Sun Oct 28 09:00:00 2007 UTC = Sun Oct 28 01:00:00 2007 PST isdst=0
What gives?
Running 10.4.8 with all updates done.

Well I fixed it the hard way - manually doing the following:
The localtime file is actually just an alias to another file, as seen here (line break added for narrower display):
foo$ ls -lah /etc/localtime
lrwxr-xr-x 1 root wheel 37B Jan 8 06:19 /etc/localtime ->
/usr/share/zoneinfo/America/Vancouver
To fix the problem, you need to update the source file:
Go to this nih.gov server and grab the file tzdata2007a.tar.gz. This filename may change over time, as new updates are added to the database. Just copy and paste the FTP URL into Safari to start.
Extract the contents of the archive to a local folder (Stuffit Expander does a fine job if you don't know how); my folder is called tzdata2007a.
In Terminal, cd into that folder and run the following commands. Note that the modifications I'm after are in the file named northamerica. However, some modifications where made to the europe and africa files as well, and the last command, zic backwards, will complain if you don't include them. Here are the commands to run:
foo$ cd /path/to/tzdata2007a
foo$ sudo zic europe
foo$ sudo zic africa
foo$ sudo zic northamerica
foo$ sudo zic backwards
That's it; you're done. Check your results with the original command again:
foo$ zdump -v /etc/localtime | grep 2007
You should now see Mar 11 and Nov 4, instead of the original Apr 1 and Oct 28. Much better!

US DST 2007 Changes - JDK1.3

Hello,
Pls provide me the solution for this DST changes in case of JDK1.3. Seems Sun has not released any patch for this version.

The solution that suggected there is to upgrade the JRE.
I cant upgrade the JRE (using in 1.3).
Does any one has a soltion what to do in ver 1.3?
as i understand it will not help to replace to zi folder because 1.3 dosnt support in multiple dst

DST 2007 changes and Oracle9iAS

Friends
Do anyone know if there is any requirement to apply any patch on Oracle 9i Application server (9.0.2).
We already have our OS, Oracle 9i database and database JVM patched for DST changes.
Thanks

Vishal,
We are also on 9iAS R2 and have the default oracle 9.0.1.4 Database on the infrastructure. You need to basically check for
1. Do you have any user defined TSTZ and TSLTZ types.
2. Do you use TSTZ or TSLTZ types or the TZ_OFFSET functions any where
3. Do a searchon Time Zone in all our pl/sql code and column names and did you find any thing??
If answers are NO ....You don't need any patches...
On the server side ...You just need to update the environment file
and check for
1. echo $TZ
YOU SHOULD GET BACK THE SETTING YOU DID IN THE ENVIRONMENT FILE ..
2. JDK patches are available with IBM
Usefull URL's
http://www-1.ibm.com/support/docview.wss?uid=isg3T1000252
Metalink Note Note 359145.1
If any more doubts
mail me on
[email protected]
Thanks
Vishnu Vardhan Reddy Singireddy

Is it possible for new ipad buyer change for Ipad 4?

i heard that apple had stop produce the new ipad due to the ipad 4 is coming. it's really unfair for new ipad buyer who just buy it this year. is it possible for the new ipad buyer change their ipad with the ipad 4?

This is just a website scam that's going around right now. It cannot infect you in any way.
Some people have reported being directed to the App Store to download a particular camera app. If you are, do not download it. It cannot infect you with anything, but you don't want to reward the scammers by downloading their app. If you downloaded the app and paid money for it, contact Apple to dispute the charge.

Satellite 5200 - Need master/slave patch for new DVD drive

I need a patch for DVD to use in a Satellite 5200.
My original DVD is broken, so i bought a Toshiba SD-C2512 DVD but it is not working inside the Satellite, but with adaptor at my Desktop PC.
I have to patch the DVD to Master.
Where can I get the file and prog to patch?

Hi
I think such patches that you mean are not available and as far as I know if you can switch a notebook from Master to Slave for example there is a jumper on the drive.
However, for me it sounds like that the drive is not compatible with this notebook. Not every drive is compatible with every notebook (e. g. pin assignment, ) ;)
You should buy another one and check the user manual. There you should find a list of compatible drives.
Bye

Small patch for New-IsoFile

I made a slight change in how New-IsoFile creates the temporary file if needed. The original used a timestamp for the filename, but I wanted to use the real GetTempFileName-call. The two changed parts are bolded below. I would appreciate any feedback!
8< - - - - - 8< - - - - - 8< - - - - - 8< - - - - - 8< - - - - - 8< - - - - -
function New-IsoFile
<#
.Synopsis
Creates a new .iso file
.Description
The New-IsoFile cmdlet creates a new .iso file containing content from chosen folders
.Example
New-IsoFile "c:\tools","c:Downloads\utils"
Description
This command creates a .iso file in $env:temp folder (default location) that contains c:\tools and c:\downloads\utils folders. The folders themselves are added in the root of the .iso image.
.Example
dir c:\WinPE | New-IsoFile -Path c:\temp\WinPE.iso -BootFile etfsboot.com -Media DVDPLUSR -Title "WinPE"
Description
This command creates a bootable .iso file containing the content from c:\WinPE folder, but the folder itself isn't included. Boot file etfsboot.com can be found in Windows AIK. Refer to IMAPI_MEDIA_PHYSICAL_TYPE enumeration for possible media
types:
http://msdn.microsoft.com/en-us/library/windows/desktop/aa366217(v=vs.85).aspx
.Notes
NAME: New-IsoFile
AUTHOR: Chris Wu
LASTEDIT: 03/06/2012 14:06:16
#>
Param (
[parameter(Position=0,Mandatory=$true,ValueFromPipeline=$true)]$Source,
[parameter(Position=1)][string]$Path,
[string] $BootFile = $null,
[string] $Media = "Disk",
[string] $Title = (Get-Date).ToString("yyyyMMdd-HHmmss.ffff"),
[switch] $Force
)#End Param
Begin {
($cp = new-object System.CodeDom.Compiler.CompilerParameters).CompilerOptions = "/unsafe"
if (!("ISOFile" -as [type])) {
Add-Type -CompilerParameters $cp -TypeDefinition @"
public class ISOFile
public unsafe static void Create(string Path, object Stream, int BlockSize, int TotalBlocks)
int bytes = 0;
byte[] buf = new byte[BlockSize];
System.IntPtr ptr = (System.IntPtr)(&bytes);
System.IO.FileStream o = System.IO.File.OpenWrite(Path);
System.Runtime.InteropServices.ComTypes.IStream i = Stream as System.Runtime.InteropServices.ComTypes.IStream;
if (o == null) { return; }
while (TotalBlocks-- > 0) {
i.Read(buf, BlockSize, ptr); o.Write(buf, 0, bytes);
o.Flush(); o.Close();
}#End If
if ($BootFile -and (Test-Path $BootFile)) {
($Stream = New-Object -ComObject ADODB.Stream).Open()
$Stream.Type = 1 # adFileTypeBinary
$Stream.LoadFromFile((Get-Item $BootFile).Fullname)
($Boot = New-Object -ComObject IMAPI2FS.BootOptions).AssignBootImage($Stream)
}#End If
$MediaType = @{CDR=2; CDRW=3; DVDRAM=5; DVDPLUSR=6; DVDPLUSRW=7; `
DVDPLUSR_DUALLAYER=8; DVDDASHR=9; DVDDASHRW=10; DVDDASHR_DUALLAYER=11; `
DISK=12; DVDPLUSRW_DUALLAYER=13; BDR=18; BDRE=19 }
if ($MediaType[$Media] -eq $null) { write-debug "Unsupported Media Type: $Media"; write-debug ("Choose one from: " + $MediaType.Keys); break }
($Image = new-object -com IMAPI2FS.MsftFileSystemImage -Property @{VolumeName=$Title}).ChooseImageDefaultsForMediaType($MediaType[$Media])
if ($Path) {
if ((Test-Path $Path) -and (!$Force)) { "File Exists $Path"; break }
if (!($Target = New-Item -Path $Path -ItemType File -Force)) { "Cannot create file $Path"; break }
} else {
if (!($Target = [IO.Path]::GetTempFileName() | Rename-Item -NewName { $_ -replace 'tmp$', 'iso' } –PassThru)) { "Cannot create ISO in %TEMP%"; break }
Process {
switch ($Source) {
{ $_ -is [string] } { $Image.Root.AddTree((Get-Item $_).FullName, $true); continue }
{ $_ -is [IO.FileInfo] } { $Image.Root.AddTree($_.FullName, $true); continue }
{ $_ -is [IO.DirectoryInfo] } { $Image.Root.AddTree($_.FullName, $true); continue }
}#End switch
}#End Process
End {
if ($Boot) { $Image.BootImageOptions=$Boot }
$Result = $Image.CreateResultImage()
[ISOFile]::Create($Target.FullName,$Result.ImageStream,$Result.BlockSize,$Result.TotalBlocks)
$Target
}#End End
}#End function New-IsoFile

Hi,
I recommend posting this on the QandA tab of the gallery item:
http://gallery.technet.microsoft.com/scriptcenter/New-ISOFile-function-a8deeffd/view/Discussions#content
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

Can default settings for new entries be changed?

When entering a new event, the default setting is "all day." This rarely is the case. Can it be turned off?

The main system fonts cannot be changed. There are a few utilities which will allow you to alter the font size in some menus.
This however is strictly a Microsoft issue. They coded Word to use a small font size for comments and gave the user no way to modify it. The only company that can fix this is MS.

XML Publisher Patch for MS Word 2007 to get the AddInns menu

Hi,
What patch i need to download from metalink for XML Publisher.
I use MS Word 2007, for creating rtf document, i need the AddInns menu in the word.
Thanks.

Why yes. How did you know that I saw the way, the truth and the light?
I just had so many people ask me how to do this, that I thought I might share it with as many people as I could and help the masses To bad that Apple just did not have it as a simple "Save As:" Maybe in the next update.
-Apple //GS

Downloaded the latest revision and now cannot open tabs for new searches or change the main tab from my home page. What did you do to my old Mozilla?

It opens to my home page but I cannot open another tab. If I change the address in the address bar, it will not go to the new address. I have to go to explorer to get these features now but I really liked my old firefox.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
See also
*https://support.mozilla.org/en-US/kb/how-to-make-new-firefox-look-like-old-firefox
Thank you.

New DST on Call Manager/Unity

Hello Guys,
I know Cisco has released patches for new DST for Unity and CCM.
The issue is my CCM and Unity are getting their time from NTP.
According to my understanding, NTP network time servers, they are not affected by DST since by definition NTP serves time in the Coordinated Universal Time (UTC) format. DST time offsets are handled by the client operating system.
Hence we will have to review the underlying client operating system settings for the CCM, Unity & Voice gateway.
Is that correct?

Hi Mirza,
You are correct. Like Mike has correctly indicated, NTP just passes off the UTC Time and you will need to perform the applicable OS changes/CCM/Unity changes as indicated. Have a look at the following;
For CCM Readme;
http://ftp-sj.cisco.com/cisco/crypto/3DES/voice/callmgr/4.1/ciscocm.4-1-3-2007-DST-Update.1-0-1-readme.htm
For Unity Field Notice;
http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/products_field_notice09186a00807dcf40.shtml
Hope this helps!
Rob

DST timezone patch for 10.1.0.5.0 on Linux

I succesfully downloaded & run a new version of the script utltzuv2.sql which checks your TSTZ current data for any rows affected by the updates to the time zone files.
(Patch 5126270
Description PLEASE PROVIDE UPDATED UTLTZUV?.SQL
Release 10.1.0.5)
I added manually lines to the timezdif.csv file (at the beginning) which is located in the $ORACLE_HOME/oracore/zoneinfo directory.
3, America/Denver,2007,
3, America/Shiprock,2007,
3, US/MOUNTAIN,2007,
3, CST,2007,
SQL> connect / as sysdba
SQL> @?/rdbms/admin/utltzuv2
SQL> select * from sys.sys_tzuv2_temptab;
no rows selected
I Downloaded and apply the DST timezone patch for 10.1.0.5.0 on Linux.
Patch 4689959
Description DST RULE CHANGE IN US, NEED PATCHED TIMEZONE FILES
2006
SQL> select case to_number(to_char(to_timestamp_tz
2 ('20070311 00:00:00 US/EASTERN','YYYYMMDD HH24:MI:SS TZR')
+ to_dsinterval('0 08:00:00'),'HH24'))
when 8 then 'The patch has not been applied'
when 9 then 'The patch has been applied correctly'
else 'Error' end "TZTEST (RUN FROM DB HOME)"
from dual;
TZTEST (RUN FROM DB HOME)
The patch has been applied correctly
I applied apply the DST JVM patch successfully. (5075511)
But I am getting value (0) as below:
select get_dst_offset('America/Los_Angeles', 2007, 3, 11, 10, 0, 0)/(60*60*1000) as OFFSET_FROM_STANDARD_TIME from dual;
OFFSET_FROM_STANDARD_TIME
0
It should be 1.
(per Note 414309.1 - USA 2007 DST Changes: Frequently Asked Questions and Problems for Oracle JVM
Patches - #6. How can I test if the OJVM patch has been applied correctly?

I reloeded java as "create or replace java system" and its work.

What are the patches released for new browsers

Hi Gurus,
It's a general question.
Is oracle released any patches for new browser versions?
Our client is experiencing the different issue with the latest browsers.
This is one of the error message which they had received: iRecuitment - oracle error 1403:java.sqlSQLException:ORA-01403: from Chrome user - need latest Patch.
Regards,
Joshna.

You need to use a certified browser -- Please see the docs referenced above for the list of supported browsers and client OS.
If you still get the same error, please see these docs.
Critical Patch Released For Release 12.1.1 and Higher Customers Using Projects Web ADI Functionality [ID 1315848.1]
Accessing Application Get Error: Fnd_session_management.Updatessioncontext Sql Exception [ID 1316294.1]
Thanks,
Hussein

Solaris 10 - patch for new DST 2007 changes

Similar Messages

Maybe you are looking for